Database Develop

Trying to downgrade, but KDZ_FW_UPD_EN not working

Hi Guys, i'm trying to downgrade the phone from 20B -> 10C, however after I launch the KDZ_FW_UPD_EN, selected the V10C_00.kdz, click start upgrade, it comes out LGmobile Support tool page and says the phone already has the latest firmware. Any idea why it not start flash the firmware?
I tried on another computer also same error.
Thank you.

if u want to downdgrade from 2.3.4 to 2.2.2 you can use SmartFlashTool_External, download this one: http://www.multiupload.com/MBRIAUG5V2 (is 2.2.2 european version) and connect ur smartphone in flash mode (turn off, remove ur battery, press volumen up and connect to ur computer) then open smartflashtool, select ROM Copy D/L, select Normal mode, in CP bin u have to select one of the two files result of ur .rar from multiupload i gave u with extension .fls, in AP Bin u need to select the file with extension .bin, select in comp port the only port it ll show, in comunication driver u have to select LGE Mobile USB Serial Port in Communication Driver or similar, and then click on start. There u have, ur smartphone will downgrade satisfatory, then u can do root, then rom manager and then cyanogenmod with nova kernel =P
sry about my english, i just want to help u some way =P

Thank you. It works after using SmartFlash tool.

Pls move it to another subforum... Wrong here in DEV section...

Thread closed
Do not post questions in Development.

[Q] How to use ODIN to upgrade firmware on Samsung I9070

Hi There,
I would like to upgrade my I9070 to the latest firmware, i have the official correct firmware for my country (HK), but unfortunately Kies has stopped working via USB (Your device is not supported by Kies 2.0 - think this was after one of the last updates, but anyway i have given up trying to fix Kies).
So i would like to upgrade via ODIN, but not quite sure how to do it and don't want to brick my phone - could anyone give some quick instructions, i know how to put the phone into download mode etc etc, just not sure on what i do in ODIN, i have a single md5 file, but what buttons do i press in ODIN, seem to be options saying phone, pda, etc - the version of ODIN is 4.03.
Many Thanks !
Dan

Can someone share Odin and suitable firmware Rom here ?

emosis said:
Can someone share Odin and suitable firmware Rom here ?
Click to expand...
Click to collapse
Hi Guys ,could anyone help out a newbie ?
I found all the ODIN instructions, basically my official firmware i want to upgrade to is a one package deal, so according to all the reports i have read i need to select the one package option instead of all the different PDA etc options. No problem, i understand that.
The only problem i have now is that the ODIN versions i have tried ill not recognise my phone when it boots up in download mode (none of the COM ports turn yellow), the PC can recognise the device, no problem - and i can transer files over in explorer.
I have tried ODIN 4.34, 4.03 & 3.98, all with different leads and different USB ports.
The really strange bit, is i have an older version of ODIN (1.31 which does recognise the phone, except it is so old it doesn't have the single integrated package option, so i can't use it).
Can anyone help, as i am now totally stuck with no way to update my phone - i've already tried re-installing drivers from Kies etc etc many times
Thanks all

danhughes1961 said:
Hi Guys ,could anyone help out a newbie ?
I found all the ODIN instructions, basically my official firmware i want to upgrade to is a one package deal, so according to all the reports i have read i need to select the one package option instead of all the different PDA etc options. No problem, i understand that.
The only problem i have now is that the ODIN versions i have tried ill not recognise my phone when it boots up in download mode (none of the COM ports turn yellow), the PC can recognise the device, no problem - and i can transer files over in explorer.
I have tried ODIN 4.34, 4.03 & 3.98, all with different leads and different USB ports.
The really strange bit, is i have an older version of ODIN (1.31 which does recognise the phone, except it is so old it doesn't have the single integrated package option, so i can't use it).
Can anyone help, as i am now totally stuck with no way to update my phone - i've already tried re-installing drivers from Kies etc etc many times
Thanks all
Click to expand...
Click to collapse
Research heimdall, or heimdall-one-click. The one-click is like Odin, and the regular one requires u to unzip the rom before u flash it. U have to put all the unzipped files in their corresponding fields, but it allows u to flash a single part of the rom, or the whole rom. So say u just want the recovery. Or just the kernel. U have that option. I like heimdall more. And maybe that will recognize your phone.
________________________________
Bacon in my coffee, please? U don't have bacon?! Unacceptable!!

triptosyll said:
Research heimdall, or heimdall-one-click. The one-click is like Odin, and the regular one requires u to unzip the rom before u flash it. U have to put all the unzipped files in their corresponding fields, but it allows u to flash a single part of the rom, or the whole rom. So say u just want the recovery. Or just the kernel. U have that option. I like heimdall more. And maybe that will recognize your phone.
Thanks very much, but looked a bit too complicated for what i wanted to do. In the end, i just went for it and used the old version of ODIN, and selected the md5 file under PDA, hit start and held my breath. Luckily it worked.
My phone is now miles faster, and as a bonus (or not) it fixed my kies recognition problem, thanks for your help !
Click to expand...
Click to collapse

Thread moved to General section.

[Q] No root recovery aymore

Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat

But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...

M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.

happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.

Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?

happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app

ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.

Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.

happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?

Yes, it's important to tell are you on stock or custom Rom

Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...

Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??

Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app

happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.

fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...

happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app

M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?

I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!

Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?

So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.

[Q] No SIM Message After Installing Latest CM10.1.3

Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal

LaDjA said:
just the first time on this device).
Click to expand...
Click to collapse
since its the first time on this device, can you check IF sim card is inserted in the correct direction
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.

LaDjA said:
Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.
Click to expand...
Click to collapse
you can try taking it back to stock ROM , you can follow this but it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced. so best to test with Stock ROM to check if its a software or hardware problem. also try to flash without SIM card and insert after flashing and first boot.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

LaDjA said:
Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal
Click to expand...
Click to collapse
For a clean install and root, flash JVU ROM and its CF_root, as it is easy and problem free. I never had any problem with JVU
The whole procedure is given below
FLASHING JVU ROM WITH ODIN v1.85:
1. Install USB drivers for i9000 on PC (ignore if already installed) and restart computer to take effect
2. Turn off your phone and put it in download mode
by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so
continue..if not do it again...
3. Plug in Phone with USB Cable To Computer.
4. In ID:COM it should go yellow and you should see
ADDED in the message box
5. Check Re-Partition option and then Click PIT
button to select: s1_odin_20100xxx.pit file.
6. Click PDA button and select :
CODE_I9000XXJVU_xxxxx.tar
7. Click PHONE button and select:
MODEM_I9000XXJVU_xxxxx.tar
8. Click CSC button and select:
GT-I9000-CSC-MULTI-OXAJVU.tar
9. When you have all the files needed in ODIN,
Click Start and let it Run
10. Once complete you will see S logo on phone
(computer will make a few noises like connect/
disconnecting
11.Unplug the Cable to the Phone
You will see your phone working excellent. Now it's time for rooting
Procedure for rooting:
1. Power Off Phone
2. Download CF-Root kernel first.
Unzip the file to a folder. You
will get the .tar file – CF-Root-
XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
— inside the extracted folder. DO NOT extract
the .tar file (even if you see it as a zip
file, which it is not). You need to flash
the .tar file using Odin to gain root
access and install the ClockworkMod
Recovery (CWM) alongside. If you’re
getting zimage file, it means you’ve
extracted the .tar file too! — and that’s
not a right thing to do.
3. Boot your phone in Download Mode —
Press and hold volume down+HOME
+POWER keys together.
4. Open Odin now. Connect your phone to PC now. You’ll notice “Added! !” message in the Odin’s message box in the bottom left.
5. On Odin, click the PDA tab and select the .tar file you got in step 2 — CF-Root-XX_OXA_JVU_2.3.6-v4.3-
CWM3RFS.tar
6. Make sure “Re-Partition” checkbox is not selected. Leave the “Auto Reboot” and “F. Reset Time” checkboxes selected.
7. Click the Start button on Odin to flash the CF-Root kernel. After the CF Root is installed, phone will restart automatically. When you see the PASS written in top left box, you can remove the cable.
8. Your phone is rooted now. That surperuser app is there! The CWM app is also there, and
clockworkmod based recovery has
been installed too. Now you enter the custom ROM world without worries. Enjoy!
PIT File DOWNLOAD Iink: www.mediafire.com/download/v2rub40k1bvccj4/s1_odin_20100512.pit
ODIN 1.85 download link:
www.mediafire.com/download/82latn22s1kl7w2/andromint-Odin3-v1.85.zip
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
CF_root download link:
download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
If you don't have USB drivers, then download below
Samsung USB drivers:
www.mediafire.com/?hzlnda0l5t8qyes

xsenman said:
it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced.
Click to expand...
Click to collapse
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)?
xsenman said:
you can try taking it back to stock ROM , you can follow this
Click to expand...
Click to collapse
In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Rohitdahiya said:
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Click to expand...
Click to collapse
The password doesn't match, or so peazip says. I can't get the file to extract.
Thank a lot, guys, for all your efforts.

LaDjA said:
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)? In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Click to expand...
Click to collapse
I assume you have a software issue, that's why I asked you to revert to Stock ROM after you confirmed the SIM card was not inserted the wrong way round. , only IF the sock ROM also gave you that result than you need to consider hardware, as I have not heard of anyone having this issue after flashing CM 10.
AS for PIT file its in 4Shared site, all they would require is you should be a member and register with them ( you can do that with any name and password) the ROM site is FileRio, there you should only use free download button , clicked a number of times ( same button) for download to begin, both uploads were by me, so its virus free. I will upload pit file to the thread asap as its very small file.
EDIT: already uploaded PIT File to thread uploaded 3 PIT files in a package used for i9000, only use 512
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?

LaDjA said:
Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?
Click to expand...
Click to collapse
the guide to solve such problems is right on top (begining) of that thread
Note:- It's assumed that you can and know how to connect your Phone to PC with USB cable . If you do not know, first install Samsung USB drivers on your PC/Laptop, than enable USB debugging on your phone by settings menu>Developer options> tick USB Debugging. After this use only Samsung USB cable and plug it into your phone micro USB port and to your PC USB Port. ( Always use the Back USB port on PC as some ports may not connect well enough for flashing ROM's. )
If unable to connect your phone to PC for any reason, refer to this guide
Click to expand...
Click to collapse
Check this out! You , YES! you are an " Android ". Not your phone but U.​

I tried everything in that guide, and it still the same.
Might be worth noting that the computer totally does recognize the device. I mean, I can access the internal SD from the computer, when the phone is on. It's just that when I connect it in download mode, Odin doesn't respond.
Might also be worth to stress that I used Heimdall to flash the recovery, when I did it. Could it be related to why I can't use Odin now?

And another thing regarding my main issue - could the "Insert SIM" message be a modem thing?

The password for XXJVU is samfirmware.com
If you are still unable to open this, then download XXJVU by Google searching and then try. This is the best way to get rid of the problem.
If you are able to go to download mode, install USB drivers for Samsung and restart PC . Now exit the Kies program and its related services from your PC. If you are using windows, you may find the tray icon and exit by right clicking. Now run Odin and flash.
If you are not able to go to download mode then search "homemade usb jig" and use the jig method described in those threads.

I'm trying to download the XXJVU again. Will see how goes.
I am able to go to download mode. So that's not it. I also don't have Kies installed on my computer, so that's also not it. I installed a few different Samsung drivers, and did the whole process a few times. The computer always recognizes the phone, but Odin doesn't.

I don't get why I can't delete stuff, if I accidentally posted twice. Anyway - feel free to disregard this one. Sorry for spamming..

OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?

LaDjA said:
OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?
Click to expand...
Click to collapse
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
Click to expand...
Click to collapse
You assume correctly - I did use the correct combo. And the battery says I have an GT-I9000. I think that's only the int'l version, isn't it?
xsenman said:
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Click to expand...
Click to collapse
I will try the ADB solution tomorrow. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Thanks!

LaDjA said:
. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Click to expand...
Click to collapse
hmm, i got the impression that you are not getting the download mode display , if it does than it is in download mode, so now you need to check your Odin3 download, what version are you using , try and download again and always use fresh Odin3, meaning, if it had a problem or even when no problem restart it a fresh. And best install Samsung USB drivers again ( link on that thread), if that did not solve it.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.

LaDjA said:
I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.
Click to expand...
Click to collapse
this is weird, anyway since heimdall is possible, right? try and download a heimdall rescue kit from MY Android collections and try flashing , if the phone boots you can also install Mobile Odin from playstore to flash stock ROM too.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

[HELP] nokia x2ds rm-1030 dead, flash 2.1.0.12 complete, flash 2.1.0.13 stuck

Hello ned help..
rm-1030 flashing rom 2.1.0.12 complete Done
i have two version
RM1013_059V788_2.1.0.12 and
RM1013_059V786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059V78 always stuck at rm1013_2.1.0.13_user_NON-HLOS.bin
and shown error dialog "failed using firehouse protocol"
need help..
ive try to redownload ROM.. but keep error
im sorry i cant upload picture coz need 10 posts but im using txt file

maybe the firmware you downloaded is corrupted.. where did you downloaded your firmware files? I use navifirm+ but yesterday I'm trying to redownload a rom but navifirm+ seems to be not working any more..

thaks for replay,
iv downloaded from Package Majnager .. and from this seidea.com/tag/rm-1013-2-1-0-13/
its still blank screen and just detect "emerency connecivity

first download nokia-x2-tools.v.1.2.en.exe, from the tool install drivers.. then go to your "C:\ProgramData\Nokia\Packages\Products\RM-XXX" and delete all files or move it somewhere if you don't want to delete.. and replace everything with the files that you downloaded.. and run "Lunch Nokia Care Suite" as administrator.. and flash your firmware..

thaks...
I thinks its hardware problem.. coz i have 5 different firmware and already used maximal method
change folder.. remove.. redownload.. and anythink
and my phone cant detect fastboot or recovery
btw thaks

aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..

I have exactly same problem havent found solution yet.
I have same problem too
arisjb said:
hello ned help..
Rm-1030 flashing rom 2.1.0.12 complete done
i have two version
rm1013_059v788_2.1.0.12 and
rm1013_059v786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059v78 always stuck at rm1013_2.1.0.13_user_non-hlos.bin
and shown error dialog "failed using firehouse protocol"
need help..
Ive try to redownload rom.. But keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
Click to expand...
Click to collapse

Remove battery from device atleast 1min
Insert battery
Start device in bootloop and if not start only connect to PC
Start Nokia care suite >product software > open product> select device and flash

jepr0x1011 said:
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
Click to expand...
Click to collapse
My Nokia X2 had also give completely dead. I tried to Flash stock ROM in it via Nokia care suite and which I've even done previously however this time my phone had gone completely blank and does not even go to recovery mode. It has gone completely unresponsive. Please help me on this.