Database Develop

Upgrading an I9000T to 2.2?

I got one of the Brazil/LatinAmerica I9000T phones running in the US/AT&T 3G:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
Im concerned that upgrading may screw up my radio files. My phone has the 3 US/AT&T 3G bands 850/1900/200 that most of the I9000s dont. Can I just upgrade the PDA to a 2.2 ROM and leave the PHONE/CSC as is? If so can I upgrade that PDA to ANY ROM?
Im also concerned that since I have the latin american phone with brazil firmware on it, and it says on bootup that its a I9000T but its not the I9000B model that the MUST READ describes as a brazil model... So Im not sure what all pit files and ROMs that are safe to use.
Optimally, when I do upgrade to 2.2, should I try to use a MODEM and CSC file from the US/AT&T/Captivate 2.2 files, and use whatever PDA ROM I choose? That seems in my head to be what to shoot for but I'm still figuring things out here...
Also, Im confused... these ROMs Im seeing are installed via update.zip, not by the ODIN method. Will I screw up my phone by installing these update.zip files?
Is there a free method to totally back up my PDA/PHONE/CSC into individual files that could be restored later?

Hello Friend.
I have the same version of phone, and I´m looking to for "original" firmware.
You've got the original firmware?

Did you guys found a solution for.. i also have the same version...

Hello everybody
Have you guys loked here?
http://forum.xda-developers.com/showthread.php?t=907701

I downgraded to 2.1 with the i9000T stock rom
Now that 2.2.1 is out for the i9000HKTTTT (i9000TUBJP9), I wanted to see if KIES would now work. After downgrading to 2.1update 1 using ODIN ,everything appears work fine on the phone. I tried updating to 2.2.1 via KIES and still get the message "This Device's version can't be upgraded" . I tried this on a few different computers with KIES 1.5 & 2.0 and no luck.
I did do a Factory reset *2767*3855# , but still no luck.
All information on the phone appears to be OK for 2.1 update 1.
I did notice in Kies if you apply the Registry Patcher and use code CWW, you will get a different message which shows that it's currently up to date. Maybe meaning, Jamaica has not received their updates yet.
Any ideas. Very frustrating. Just trying to get this phone back to stock so it can receive updates when I give to another family member.

GT-i9003
By any chance any one have a link for the latin America Stock rom for the I9003... I write in this tread since is the closer one I found about LatinAmerican Roms.
It sims there are only Europeans, Asians, Arabic and the US rom.
I installed every one and each of them. the signal was fading in and out, and I was only getting edge.
so any one with the I9003 Latin america Stock Rom?

[Q] smthg like wrong country code after update?

hi there,
i used the reghack with kies to update my galaxy from android 2.1 to 2.2, originally the infos it gave was: JP1 JP1 JP2, now it
is: PDA: JPO, PHONE: JPP, CSC: JP3
btw, im in austria, and it seems that my phone now thinks to belong to another country, as it says "R" (i guess for roaming, cause i had to enable data roaming to use data transfer lol)
does anyone have an idea how i could get that repaired?
greets

[Q] Im new, why I cant update my samsung Galaxy s to 2.2

Hi all.
Could anyone tell me why I cant update my samsung Galaxy s to 2.2,
its on o2 but the phone was on orange if thats any help.
Iv downloaded kies and it says there are no updates for my phone so can you help me?
Ive updated my girlfriends phone and she has got the same phone me
She can update it again now.
Allso we cant send mms:mad
Pete.

Hey there
Responding to you're message.
Im having this same problem with my girlfriends phone.
Everytime I try to update her phone it says that it cannot upgrade her phone.
I updated mine to 2.2.1 now. Her phone is still on 2.1-update.
Her buildnummer is I9000XXJF5.
Either she does not recieve my MMS.
Very strange.
P.s. Im from holland, and the phone arrived in Germany Language.
Please, need some help.

Your apn settings will be different on o2 if the phone is from orange which is why probably both internet and mms doesnt work.
Don't know why kies isn't playing ball, make sure u have the latest version.
I'd suggest changing to a stock firmware from samsung. E.g. The latest jpy firmware.
First thing is to check the 3 bitton combo works, if it doesn't then there is a really simple windows based fix for this on this forum that doesn't require any programming or command line stuff.
Next, visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase.
Sent from my GT-I9000 using XDA App

Thanks for getting back,
Ive done all the setting with o2 and still dont work.
I did the three button combo and reset my phone and put all the setting back in still no good.
Ive done all this visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase but it would not download.
My phone numbers Pda jf3 Phone jf3 and Csc je5 if this helps
Cheers Pete.

If your phone is O2 UK you get update to )2 firmware .
If its an Orange product code phone you need to check Orange has updated the firmware .
jje

you could always do what i did with my o2 uk phone that wouldn't upgrade to latest version...im guessing that you may still be on JM1 software? [thats what mine was].
all i did was download the Kies registory patcher and use it to tell kies that i was on XEU firmware. next time i connected to kies it told me there was an upgrade available to JPY [2.2.1].
hope this helps, Matt

Settings for O2 UK Kies Reg Patcher
SoftwareRevision
was
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
ProductCode
Was
GT-I9000HKDO2U
HIDSWVER
Was
"I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1"
DEVCONINFO
Was
" MN(GT-I9000);VER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);HIDVER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);PRD(GT-I9000HKDO2U);SN();IMEI(***********);PN(*********** );CON(AT,
Updated O2 firmware and using Kies Reg Patch take the chance to save the downloaded rom .
jje

[Q] unable to uprgade firmware with kies

hey guys,
im using roto's rom for 1 month now, but when im connecting with kies
i get the message that my version can't get updated.
i think the problem is my csc.
PDA: JMI
PHONE: JMA
CSC: JMG (KOR)
i don't know if KOR stands for korea, i guess.
but is there a way that i can get back to stock CSC?
im using the SGT: P1000 euro model.
thanx in advance

Just flash a stock rom via Odin and you're good. Then connect to PC and update with Kies.

roadhero said:
Just flash a stock rom via Odin and you're good. Then connect to PC and update with Kies.
Click to expand...
Click to collapse
I've downloaded the latest euro firmware from samfirmware dot com and after the installation, my tab is at stock rom with the PHN csc code, this is the one that i needed for the dutch country and im able to receive update's trough kies.
Only kies is showing u have the latest firmware already, thats okey.
But im sure when 2.3 GingGerbread comes i'm able to get it with kies.
Good Luck!

@d a boskloper, i hope so... 2.3 will come to galaxy tab im waiting for this to happen...
Sent via Galaxy Tab

[Q] Revert back to Stock to connect and update with Kies?

I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?

Two things here:
1. Your sales code should match the PDA/PHONE/CSC for kies to 'see' ifcthere is an update.
2. As of this writing there is no gingerbread update for the UK.
Sent from my GT-P1000 using Tapatalk

I think you have an Asian stock firmware there. PHN is Philippines, I think. So Kies thinks you have a Philippines SGT.
I flashed JJ4 from samfirmware.com, which is a Russian firmware.
I think, from what I've read, that stock Gingerbread is available in UK (sorry to contradict Bongski). Unfortunately I didn't save my firmware before flashing away from stock, so I'm in the same boat as you - no Kies updates.
What you need is someone to provide an official CPW firmware, I think, which you would flash with Odin and then Kies should update you. I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.
If you're comfortable with Odin, you might want to try that?
If you do get the CPW firmware, please let me know...!

@treb1971
CSC PHN doesn't stand for Philippines. Philippine CSC's are as the following:
GLB - Philippines;Globe
SMA - Philippines;Smart
XTC - Philippines;Multiple
XTE - Philippines;SUN

My bad - apologies...

If you do get the CPW firmware, please let me know...!
Anyone got this and can help?
'I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.'
I have read 45 pages of SpoofFW and its way over my head!
Thanks in advance