Okay, so this is a doozy. I recently got a Droid3 to replace my original Droid. I've had it for less than 3 months. Its been rooted using Pete's One Click Root for this entire time without any issues.
Last week the following symptoms manifested:
1) Most applications, including system applications, force close constantly.
2) I'm usually unable to run any applications, including the Market.
3) What applications are having issues is not consistent.
4) The phone will reboot itself randomly, sometimes constantly.
5) Sometimes after a reboot it gives me no service and has the "Touch Android to begin" screen again. The phone is completely unusable when it does this, and the only fix is to pull the battery and then its back to its previous state.
5) Any changes made to the phone do not survive a reboot.
This last one is the real kicker. I can go through, uninstall every application I've ever downloaded but if you restart the phone or it restarts itself they will all return. This goes for everything on my Internal Storage. The SDCard seems unaffected...
I tried the SBF trick here from rootzwiki. (can't link since I'm new)
This did not work. How it failed might be important:
1) The primary method (psouza4's) acts like its successful but doesn't actually do anything.
2) RSDLite method will fail in step 3 (mbmloader.bin) every time, no matter what fastboot file I try to use.
3) After doing RSDLite I had the "flashboot flash failed" error and the phone was unusable. I then tried psouza4's method again and my phone has reverted to the same broken state it was in when I started.
So I'm not at all sure what I can do here. Since the bootloader isn't cracked yet I have no means to load another ROM. The only method I can find for Droid3 is through a Marketplace app that, on the rare instances I can install it, force closes immediately!
Any advice or ideas at all would be nice.
As for what started this, only two things happened out of the normal phone usage:
1) My girlfriend tried to text me a picture for the first time (of some chairs she wanted to buy for those curious/suggestive ) which never got to me initially but when it finally did after the 4th attempt I was never able to download the image.
2) I put a PDF file on the Internal Storage. Its one I've had for years and its just some manual I needed mobile and I don't have a laptop. Confirmed its malware free as far as any software can tell.
Working theory is I unplugged my phone from the USB too quickly after uploading the file but I don't know for sure. Nothing else was done unless Verizon had a OTA update that would break a rooted phone (guessing not since no one else seems to have this issue anywhere).
Again, any help someone can provide would be excellent. I'm going to have to load up my broken Droid in the mean time. Keyboard doesn't work and the touchscreen is failing but it can take calls more reliably than my Droid3 currently!
Cowmonaut said:
Okay, so this is a doozy. I recently got a Droid3 to replace my original Droid. I've had it for less than 3 months. Its been rooted using Pete's One Click Root for this entire time without any issues.
Last week the following symptoms manifested:
1) Most applications, including system applications, force close constantly.
2) I'm usually unable to run any applications, including the Market.
3) What applications are having issues is not consistent.
4) The phone will reboot itself randomly, sometimes constantly.
5) Sometimes after a reboot it gives me no service and has the "Touch Android to begin" screen again. The phone is completely unusable when it does this, and the only fix is to pull the battery and then its back to its previous state.
5) Any changes made to the phone do not survive a reboot.
This last one is the real kicker. I can go through, uninstall every application I've ever downloaded but if you restart the phone or it restarts itself they will all return. This goes for everything on my Internal Storage. The SDCard seems unaffected...
I tried the SBF trick here from rootzwiki. (can't link since I'm new)
This did not work. How it failed might be important:
1) The primary method (psouza4's) acts like its successful but doesn't actually do anything.
2) RSDLite method will fail in step 3 (mbmloader.bin) every time, no matter what fastboot file I try to use.
3) After doing RSDLite I had the "flashboot flash failed" error and the phone was unusable. I then tried psouza4's method again and my phone has reverted to the same broken state it was in when I started.
So I'm not at all sure what I can do here. Since the bootloader isn't cracked yet I have no means to load another ROM. The only method I can find for Droid3 is through a Marketplace app that, on the rare instances I can install it, force closes immediately!
Any advice or ideas at all would be nice.
As for what started this, only two things happened out of the normal phone usage:
1) My girlfriend tried to text me a picture for the first time (of some chairs she wanted to buy for those curious/suggestive ) which never got to me initially but when it finally did after the 4th attempt I was never able to download the image.
2) I put a PDF file on the Internal Storage. Its one I've had for years and its just some manual I needed mobile and I don't have a laptop. Confirmed its malware free as far as any software can tell.
Working theory is I unplugged my phone from the USB too quickly after uploading the file but I don't know for sure. Nothing else was done unless Verizon had a OTA update that would break a rooted phone (guessing not since no one else seems to have this issue anywhere).
Again, any help someone can provide would be excellent. I'm going to have to load up my broken Droid in the mean time. Keyboard doesn't work and the touchscreen is failing but it can take calls more reliably than my Droid3 currently!
Click to expand...
Click to collapse
I can say a couple words to describe my reaction.. OH ****. Your phone seems to have too many problems to be software related. Try to flash back to stock 5.6.890 and get a new phone.
Sent from my DROID3 using XDA App
Hmm, I guess for the mean time I'll just have to keep trying to get the Marketplace ROM Manager to install and launch. Should be a way to install straight to the SDCard that doesn't have problems.
Thinking it over, my Internal Storage may just have a bad sector... Yeesh.
Have you tried formatting /system in mounts and storage in CWM? Then reinstalling a fresh rom on top?
Sent from my DROID3 using xda premium
Negative. I didn't have CWM installed (stock ROM just rooted for certain apps) and apps are usually crashing now.
I'll give that a shot though. Sometimes I can use an app so maybe if I'm persistent...
and to verify, you are using the verizon droid 3 xt862? Are you on 5.5.959 or 5.6.890 (or possibly 5.7.894)?
Yea can't get any new apps to run. Interestingly, the camera app seems to crash the OS at the moment.
I think I'm going to have to try to RMA...
MrJudylicious said:
and to verify, you are using the verizon droid 3 xt862? Are you on 5.5.959 or 5.6.890 (or possibly 5.7.894)?
Click to expand...
Click to collapse
Its running 5.6.890. Unless I'm mistaken its the xt862. I've only had it since September.
well as long as root isnt showing and the /system hasnt been changed from stock rom, it should work. i do find it bad that rsd didnt work. i wonder if you were trying to flash the .959 sbf on your .890 system? I would def try again to sbf and wipe data/cache through stock recovery after that using volume buttons (android!)
Well, that's kind of the problem. Changes don't survive a reboot so i haven't been able to unroot the phone. I double checked and the file was the .890 flashboot. Wiping data/cache literally does nothing.
Is there a way to format this offline, from a PC? Going to try some more Google searches...
wiping data/cache should erase all of your saved data and force you to *228. Make sure USB debugging is on, set usb to Charge Only, try petes motorola tools to unroot but using RSD 5.5 fastboot .890 found http://forum.xda-developers.com/showthread.php?t=1255198
MrJudylicious said:
wiping data/cache should erase all of your saved data and force you to *228. Make sure USB debugging is on, set usb to Charge Only, try petes motorola tools to unroot but using RSD 5.5 fastboot .890 found http://forum.xda-developers.com/showthread.php?t=1255198
Click to expand...
Click to collapse
1) How do you unroot with Pete's motorola tools? Is it a different version than the one click root? Cause that's how I rooted my phone in the first place but it doesn't seem to have an option to unroot...
2) The link for the flashboot file gives a 404 error. The attached .RAR only has the .XML file.
Any place else I can get that version?
just enter stock recovery by holding down the x key on the keyboard when you boot up and wipe data
Edit: srry didnt read the full post
jellydroid13 said:
just enter stock recovery by holding down the x key on the keyboard when you boot up and wipe data
Click to expand...
Click to collapse
If you read the original post, that doesn't work.
Okay so I had an outdated version of Pete's tools which is why I didn't see the unroot option. Mine is the older one that was a batch file, not a application.
Got that sorted out and it still doesn't work. Seems I may have some permissions issues:
Code:
> su
> /system/xbin/su
> mount -o remount,rw /dev/block/mtdblock3 /system
> if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
> exit
> exit
[email protected]_solana:/$ su
exit
exit
exit
Permission denied
sh[email protected]_solana:/$ /system/xbin/su
Permission denied
[email protected]_solana:/$ mount -o remount,rw /dev/block/mtdblock3 /system
mount: Operation not permitted
[email protected]_solana:/$ if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
[email protected]_solana:/$ exit
(success)
That's part of the ADB log. There are a lot of other permission denied messages, which is a little comforting. The only thing I could think of that happened is permissions didn't get set right when Internal Storage was unmounted from my PC.
Since I can use ADB to access the shell, how can I format /system on the droid3? I can't seem to find the correct root name to use.
Cowmonaut said:
Okay so I had an outdated version of Pete's tools which is why I didn't see the unroot option. Mine is the older one that was a batch file, not a application.
Got that sorted out and it still doesn't work. Seems I may have some permissions issues:
Code:
> su
> /system/xbin/su
> mount -o remount,rw /dev/block/mtdblock3 /system
> if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
> exit
> exit
[email protected]_solana:/$ su
exit
exit
exit
Permission denied
[email protected]_solana:/$ /system/xbin/su
Permission denied
[email protected]_solana:/$ mount -o remount,rw /dev/block/mtdblock3 /system
mount: Operation not permitted
[email protected]_solana:/$ if [ -e /data/local/12m.bak ];
> then
> rm /data/local/12m.bak
> fi
[email protected]_solana:/$ exit
(success)
That's part of the ADB log. There are a lot of other permission denied messages, which is a little comforting. The only thing I could think of that happened is permissions didn't get set right when Internal Storage was unmounted from my PC.
Since I can use ADB to access the shell, how can I format /system on the droid3? I can't seem to find the correct root name to use.
Click to expand...
Click to collapse
Have you tried to root manually? Here are the original instructions vulnfactory.org/blog/2011/08/25/rooting-the-droid-3/
[edit] I guess I miss read that you are trying to unroot.
try http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/ but you cant go from .890 back to .959! no idea about mounting, sorry.
MrJudylicious said:
try http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/ but you cant go from .890 back to .959! no idea about mounting, sorry.
Click to expand...
Click to collapse
That's the reference to Rootzwiki I made in the original post, doesn't work sorry.
Using ADB I mounted /system as rw and tried to manually remove certain apps. Once I re-mounted they were there again. So something is preventing me from making real changes to the Internal Storage.
Cowmonaut said:
That's the reference to Rootzwiki I made in the original post, doesn't work sorry.
Using ADB I mounted /system as rw and tried to manually remove certain apps. Once I re-mounted they were there again. So something is preventing me from making real changes to the Internal Storage.
Click to expand...
Click to collapse
You don't have superuser permissions.. In the ADB shell your command line should start with a # indicating superuser permissions.. you have a $
ChaoticWeaponry said:
You don't have superuser permissions.. In the ADB shell your command line should start with a # indicating superuser permissions.. you have a $
Click to expand...
Click to collapse
Where do you get that idea?
When I do this manually:
1) I'm running the command prompt as Administrator
2)I'm launching into adb using the command "adb shell".
3) First thing I do is type in "su"
4) second thing I do is approve "unknown" in the superuser app on account of it never remembering I already did that.
5) I use the command "mount -o rw,remount -t yaffs2 /dev/block/mtdblock4 /system"
6) I use the "ls" command on /system/app and find an .apk to uninstall (not all my apps seem to be installed in this location either...)
7) I use the "pm list packages" command to find the rest of the files for that .apk
8) I use "rm <filename>.apk" followed by "pm uninstall <whatever that developer chose to name things>" command to fully uninstall.
I should note on my phone at this point it disappear from the application list.
9) I use the command "mount -o ro,remount -t yaffs2 /dev/block/mtdblock4 /system"
10) I use the "ls" command on /system/app to confirm and voila, the apk file is back!
The app doesn't show up in my app manager until I reboot the phone. Changes to /system and /data are not persisting and I have no idea why.
I can't seem to unmount them either so I can't format via ADB...
Related
Just a couple of days ago my Market seems to have frozen. I'll try to start downloading something (or updating) and all it does is say "starting download". Never progresses beyond that. I've canceled the download and restarted a million times. I've tried to download any application on the market and get the same results. I've flashed back to a nandroid backup that was several days before this happened. I've turned wifi on/off several times, turned airplane mode on/off several times. Restarted more times than I can count.
No idea. Nothing changed from when downloads worked to now. No new apps, no settings changed. Just stopped downloading.
[Solved] - See post #7
Likely to be an issue at google's end...
try
Code:
adb shell mount -o rw /dev/block/mtdblock3 /system
adb shell echo "ro.config.nocheckin=1" >> /system/build.prop
B, what Does that code do? Do I just drop the adb commands if in terminal (same otherwise)?
B-man007 said:
try
Code:
adb shell mount -o rw /dev/block/mtdblock3 /system
adb shell echo "ro.config.nocheckin=1" >> /system/build.prop
Click to expand...
Click to collapse
What exactly does that do? First line mounts /system form editing, but I have no idea what the second line is about.
For cyanogen roms, cyanogen has a setting to disable the checkin service by google in his build.prop
the checkin service is required for setup wizard when coming from a wipe, but is not needed after. this is why its not disabled by default. Its what causes the market freezes most of the time. if its still giving errors, there may be a bigger problem.
Problem solved.
Didn't do your lines of code there B, but what I did do worked.
Went to Manage Applications and then Google Apps and cleared the data for it. That required that I resign into my Google Account when I went back to the Market.
On another note that may or may not be related, I keep getting gapps forcecloses. They seem to come randomly, not sure why. Don't know if that could be related, seems like it could be though.
ok, so i tried to get help in the actual froyo 2.2.13 install thread but i'm not getting an answer.
i downloaded, installed, and it said it was successful.. i rebooted, went into the settings to see if it changed, and it still said 2.2.9. i tried to do it again and now my phone will not reboot into recovery using droid x bootstrap or rom manager... won't even go into it if i do it manually... i tried to uninstall bootstrap and rom manager and reinstalling, no luck. please help.
brandon2x said:
ok, so i tried to get help in the actual froyo 2.2.13 install thread but i'm not getting an answer.
i downloaded, installed, and it said it was successful.. i rebooted, went into the settings to see if it changed, and it still said 2.2.9. i tried to do it again and now my phone will not reboot into recovery using droid x bootstrap or rom manager... won't even go into it if i do it manually... i tried to uninstall bootstrap and rom manager and reinstalling, no luck. please help.
Click to expand...
Click to collapse
Try these comands from :
AllDroid Public Board»Motorola»Droid X Forums»Droid X Rooting»How to get 2.2, Rooted, on your Droid X
under:
If you have /system/xbin/su and /system/app/Superuser.apk, but cannot use "Superuser" (no prompts from Superuser app, "permission denied" when you try to run "su"), just do the following:
Run "adb shell"
Run "/system/xbin/su"
Watch your screen for Superuser app to prompt for permission and click "allow"
Run "mount -o remount,rw /dev/block/system /system"
Run "cp /system/xbin/su /system/bin/su"
Run "chmod 4755 /system/bin/su"
Open the SuperUser application on the phone (app launcher) and make sure that "superuser" isn't listed and denied. If so, "forget it" and return to step 2. If you can't find SuperUser, it's not installed and you should download from this posts attachments and "adb install Superuser.apk"
[optional] Run "mount -o remount,ro /dev/block/system /system"
This should help you get your su working again.
not sure on your process so if you still do not have the .13 I would go back to your process and see what you are missing. I rebooted into recovery from bootstrap when I installed mine. Then I had to do the above commands to get my su back.
If you still don't have it, try the FULL instructions from here:
MDW Presents: Droid X 2.3.13 - The Froyo Upgrade
read through it and see if #5 from step 2 pertains to you.
The biggest thing to remember is to mount before you select the file to load on your sd card.
This thread:
Motorola Droid 2Droid 2 Android DevelopmentHow to root the Droid 2
will also be helpful regarding root if you have further questions.
Hope this helps.
My su is working fine. Nothing is being denied when I open it. Just cannot get to recovery with any option... im lost...
Sent from my DROIDX using XDA App
Maybe just double check through adb shell even if you are not having su issues?
Run "adb shell"
Run "/system/xbin/su"
Watch your screen for Superuser app to prompt for permission and click "allow" (I never saw any request)
Run "mount -o remount,rw /dev/block/system /system"
Run "cp /system/xbin/su /system/bin/su"
Run "chmod 4755 /system/bin/su"
I had similar issues of nothing being denied after a successful install and had to do the su commands. It helped me to reboot into recovery afterwards.
Sent from my DROIDX, Froyo FTW. Obsidian?
Ok im still learning.... how do I "run adb shell" and do these commands you're telling me...
Sent from my DROIDX using XDA App
brandon2x said:
Ok im still learning.... how do I "run adb shell" and do these commands you're telling me...
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I saw your post in the other thread. The best thing you can do is go through the links I gave you. Start with the root thread and click the more directions link in it. read through the processes and make sure you download all files and also understand what sbf is. Once you have all of the tools to do root and load whatever leak or rom you want you should be set. Understanding what is going on is key. This is a decision you are making to alter your phone for your benefit. Take the time to download SDK and whatever else is needed for your computer. Become familiar with what shell is and how to get there as well as explore within it. If you can get shell down and how to access your su and run commands, you should know enough to start. There are many things you need to research in order to be confident in what you are doing. I am sure you will not have a problem, just putting the time in to figure out everything is key. This is what I had to do.
I think that this is the best advice I can give you. None of us can know exactly what you are doing so you need to know the processes and choose which one is going to work for your circumstance. Good luck and if you have anymore problems I am sure all of us on xda can figure out a solution for you.
ok, finally, with a little help i got my phone rerooted and back to normal. learned a lot in the process too. thanks to all...
I have sucessfully rooted my nook and I can load apks from dropbox, installers or via adb so I am a happy camper, all is good....
But I got greedy. The ComicViewer doesn't work well without menu keys so I decided to install softkeys.apk and that is where the trouble started, something is amiss.
I am not an expert here, just a novice, so forgive my patchwork explanation.
Here's what I know and what I did, maybe someone can spot my error?
I can fully access adb.
I remember installing SuperUser and SU using the commands:
# adb shell
# cd /system/bin
# mount -o remount,rw /dev/block/mmcblk0p5 /system
# cat /data/local/su > su
# chmod 6755 su
# ls -l su
And all was fine, SuperUser shows up in the drawer. Then I tried installing SoftKeys and it never showed up or worked.
So I figured I fubared the SuperUser install somehow or have an old version of SU or SuperUser. So I downloaded the most recent versions and went to uninstall the original with uninstall utilities and it's not listed in any of them, so I tried using adb (adb shell ls /data/app) and it's still not in the list.
I even reset the Nook to factory and rooted again with nooter and when I tried to install SuperUser again (downloaded the latest version here on the forum) it said "Install Failed already exists!"
So I cannot uninstall the SuperUser or overwrite it with a newer version, and a factory reset doesn't fix it??
I cannot use any root utilities like SuperUser or z4root, SuperUser has all blank screens and I cannot update it and 4zroot just doesn't seem to do anything but reboot the nook.
Titanium Backup says I don't have root access and other utilities say the same thing,
I can mount system partition as read-write
> adb shell
# mount -o remount rw /system
# exit
That works...
So I tried the commands again to install SuperUser and SU and when I try to install SU
# cd /system/bin
# mount -o remount,rw /dev/block/mmcblk0p5 /system
are OK but when I do:
# cat /data/local/su > su
I get:
Cannot create su: remote access failed
I have also tried a few other things that seem to be available to root users and all come back with write or access errors.
What could I be doing wrong?
Note: I also tried to do a full wipe by using that Power and Volume Down and nothing happens...
Power the nook on and off immediately 8 times until it does a full factory reset. When I've done the Power+VolUp+Nook button reset it doesn't always seem to do a FULL reset. When the nook fails to boot 8 times it does a different reset that takes a good deal longer and (at least in my experience) seems to be the real deal.
z4root will work and install superuser for you.
mhoepfin said:
z4root will work and install superuser for you.
Click to expand...
Click to collapse
I have already mentioned that that did not work, but thanks for the suggestion anyway.
Ok, something VERY weird is going on.
I have reset it to factory twice
Each time I did it by powering on and off 8 times in a row
The first time after it indicated it was updating th software, it went into a stuck at NookColor Logo boot loop again.
The second time I left in the nooter microSD card and it booted properly.
But it booted to a "clean" system with all my programs.
All my settings and data was gone, but all my apks were still installed.
So what exactly did it reset? Just data?
I tried to get it to flash both ways, the quick (power/home/volume) and now twice with the 8 power cycles. Neither reset the Nook entirely.
Am I screwed?
I want to go back to factory to fix this thing
EDIT:
Looks like I am locked out of the system entirely, none of my apps work, some of them come back and say no write access.
I cannot do an app listing like:
adb shell ls /data/app
I get:
opendir failed, Permission denied
I can't do a simple mount
mount -o remount rw /system
I get:
mount: operation not permitted
This should help you with what type of reset you want to do. I think you should do another 8 power on/off reset followed by a power-up-home reset to get it fully reset.
axe2 said:
This should help you with what type of reset you want to do. I think you should do another 8 power on/off reset followed by a power-up-home reset to get it fully reset.
Click to expand...
Click to collapse
I tried that...
Now it's completely dead.
Won't power up at all.
It had plenty of battery life left and plugging it in will not boot it either...
gormly said:
I tried that...
Now it's completely dead.
Won't power up at all.
It had plenty of battery life left and plugging it in will not boot it either...
Click to expand...
Click to collapse
Well that's a bummer! Maybe something went wrong in one of the resets. Did they seem to complete? If it's not a hardware problem you should still be able to revive it via nooter. I would suggest PMing pokey9000 and see if he can walk you through a recovery. You might be the first near brick that requires running some of the recovery commands by hand. I think Pokey9000 knows the most about that.
axe2 said:
Well that's a bummer! Maybe something went wrong in one of the resets. Did they seem to complete? If it's not a hardware problem you should still be able to revive it via nooter. .
Click to expand...
Click to collapse
Yea, but it won't respond to anything, it won't boot meaning no power at all.
It's just completely black screen.
Nothing I do does anything.
gormly said:
Yea, but it won't respond to anything, it won't boot meaning no power at all.
It's just completely black screen.
Nothing I do does anything.
Click to expand...
Click to collapse
Whatever you do make sure the battery is getting charged somehow.. Try to leave it plugged into the wall or in a usb. Does the computer see the device when plugged in? HAve you tried to remove the SD card from the NC while powering up?
norkoastal said:
Whatever you do make sure the battery is getting charged somehow.. Try to leave it plugged into the wall or in a usb. Does the computer see the device when plugged in? HAve you tried to remove the SD card from the NC while powering up?
Click to expand...
Click to collapse
Yep tried all those things...very frustrating afternoon so far
However...I did get it to boot.. here is how:
Press and hold the power button while inserting the USB charger connected to a computer, continue to hold (I think it was 10 seconds or so).
I remember doing this to reset a device a long time ago, not sure what.
But it worked, not only that but I was able to do a pwer/up/home rest and this time it completely wiped the nook. It looks like I am back to factory!
YES!!
Thanks for alll the help and suggestions guys. Hopefully this struggle will help someone else in the future.
gormly said:
But it worked, not only that but I was able to do a pwer/up/home rest and this time it completely wiped the nook. It looks like I am back to factory!
YES!!
Thanks for alll the help and suggestions guys. Hopefully this struggle will help someone else in the future.
Click to expand...
Click to collapse
OK. This time around, do this:
(1) nooter
(2) use ADB to enable Non-Market Apps
(3) use ADB to enable multitouch
(4) Use ADB to push z4root over to the NC
(5) Run z4root and do a full-root (whatever is NOT the "temp" option)
(6) Use ADB to install Astro
(7) Use ADB or Astro to install a market
(8) Install the rest of your apps however you choose.
johnopsec said:
OK. This time around, do this:
(1) nooter
(2) use ADB to enable Non-Market Apps
(3) use ADB to enable multitouch
(4) Use ADB to push z4root over to the NC
(5) Run z4root and do a full-root (whatever is NOT the "temp" option)
(6) Use ADB to install Astro
(7) Use ADB or Astro to install a market
(8) Install the rest of your apps however you choose.
Click to expand...
Click to collapse
I did 1,2,3,6,7,8 and in place of 4/5 I used the most recent version of SU and SuperUser and all is good on my Nook! Not sure what happened before but it must have been a bad version of su or superuser. In any case, all seems fine, only Titanium doesn't work, all the rest of the root requesting apps work fine.
Thanks!
Hey guys
So I am currently running 2.3.3 on my N1. I manually flashed the update from Here. I used the "Modified GRI40".
So after update, I noticed that my adfree wasn't working. Running the app, it tells me my host file is up to date. However, no ads are being blocked. Same after uninstalling and re-installing the app. So then I decided to try to copy the host file over manually using adb.
I run adb and get root prompt. Then I mount /system as rw using
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
It appears to work. So then I try copying the host file to /system/etc using
Code:
cp hosts /system/etc
Then I get the following error.
"write error: No space left on device"
But i do, over 30mb of free space.
So I don't know what the issue is. Im thinking that maybe /system isn't being mounted as RW so it is giving the error??
Any help would be much appreciated.
Thanks!
Did you check the /system free space, or /data?
Try doing a df -h from the terminal to verify that you do, indeed, have free space on /system as well as /data, as Jack_R1 mentioned.
codesplice said:
Try doing a df -h from the terminal to verify that you do, indeed, have free space on /system as well as /data, as Jack_R1 mentioned.
Click to expand...
Click to collapse
Well looks like somehow I don't have any space left. I went to go download a terminal application from the market but it errored saying no space left.
So now I can't even install new apps.
However, under settings->storage it says I have 28MB of free space left.
Any ideas?
Sent from my Nexus One using XDA App
Reboot, wipe Dalvik cache.
Go to Manage Applications, clear browser cache.
If it restores you some space - great, proceed with what codesplice suggested above.
If it doesn't - backup, wipe and reflash.
If no backup installed - you're out of luck.
Since you seem to have adb functioning, you can run adb shell df -h to get a readout of your available space on your different file systems. This could help troubleshoot the issue.
Additionally, rather than doing a long manual "mount" command, you could simply do an adb remount to automagically remount all file systems in read/write mode.
The indication under Settings --> Storage indicates free space on /data, I believe, and gives no indication of /system (where you're trying to copy the hosts file).
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
codesplice said:
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
Click to expand...
Click to collapse
Well that's thing, that is why I started this thread because I was trying to use ADB to push a new hosts file but got the no space error. So I already tried that.
Sent from my Nexus One using XDA App
I was asking if you had specifically tried removing the old one and replacing it rather than just overwriting.
Oh I see what you mean. But no I have not, let me give it a shot.
**Nope didn't work. I still got the same error, no space left on device.
Have you had the opportunity to do adb shell df -h yet?
codesplice said:
Since you seem to have adb functioning, you can run adb shell df -h to get a readout of your available space on your different file systems. This could help troubleshoot the issue.
Additionally, rather than doing a long manual "mount" command, you could simply do an adb remount to automagically remount all file systems in read/write mode.
The indication under Settings --> Storage indicates free space on /data, I believe, and gives no indication of /system (where you're trying to copy the hosts file).
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
Click to expand...
Click to collapse
No to hijack this thread, but I just wanted to ask, does "adb remount" require root?
Brownbay said:
No to hijack this thread, but I just wanted to ask, does "adb remount" require root?
Click to expand...
Click to collapse
yes, without root access to the filesystem, adb remount will fail.
So when I try adb shell df -h, I get:
"-h: No such filesystem or directory"
You don't have busybox. Try running "adb shell df", maybe it'll still give some info.
Ok when I ran adb shell df I got a listing of filesystems. /system says size 145M and used 145M. So apparently it is full.
How could that be though?
It could be that you have some bad blocks on your /system partition (you can generally only check by doing a wipe operation in recovery and then viewing the log). These bad blocks could take up space that would otherwise store your system data, and could push you over capacity.
Or you could just have some extra bloat related to that ROM. You could drive to remove some of the applications on /system that you don't have use for (the Amazon MP3 thing, for instance). I'd suggest using Titanium Backup to do this, but you can also do it by manually using the adb shell.
Alternatively, a full wipe and clean reinstall may help make sure you don't have anything left over taking up space.
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
decoyjoe said:
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
Click to expand...
Click to collapse
I've been really impressed with the Kang-o-rama ROMs. Basically prettied-up versions of Cyanogen. The latest release is a beta based on CM7, so still has a few issues. The prior release (KOR 1.1Final) is still quite solid.
And yes, a nandroid backup creates a copy of your current disk image, which can then be restored at any time to revert back to a previously-working configuration (great for when you break stuff!).
decoyjoe said:
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
Click to expand...
Click to collapse
Exactly Remember to wipe before restoring
Oh and that brings up another thought.
So if before I flash a new ROM, I do a Titanium Backup and then flash the ROM...
Would I then be able to restore that Titanium Backup made on the previous stock ROM to restore all my apps and user data?
I have been experimenting with my new droid/milestone the past couple of days, odd problems which I am past now but still curious about.
Firstly after flashing the 2.1 sbf with rsd it will autoboot and screen slider will be there, then when I reboot, screen slider will be missing. This only happend when I flashed an sbf from the sbf site(2.1 uk version, not service), doing a factory reset didn't have any problem -could reboot as many times and slider would be there.... then suddenly after factory boot it would dissapear after first boot. Anyway solved this problem by installing screen mode widget after first boot after flash, solved problem, but still weird. Fixed this now but still curious about it.
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Also any thoughts on why nandroid backup is missing from my recovery menu even though my droid is rooted. I thought it was meant to appear.
I am still learning and researching, and appreciate any links or tips.
droidtech1 said:
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Click to expand...
Click to collapse
This is odd. Which OpenRecovery did you install? Androidiani? GOT? Or the "original" OpenRecovery? Are you aware, that you come into OpenRecovery by starting Recovery Mode and apply update.zip?
droidtech1 said:
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Click to expand...
Click to collapse
Using the app from the market worked like a charm for me. No idea, what might have gone wrong for you...
droidtech1 said:
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
Click to expand...
Click to collapse
For remounting, try "mount -o rw,remount /dev/block/mtdblock6 /system" and for undoing this, use "ro" instead of "rw".
droidtech1 said:
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Click to expand...
Click to collapse
You should download busybox and put the "busybox"-file in the directory /sdcard. After that do:
Code:
# su
# mount -o rw,remount /dev/block/mtdblock6 /system
# cp /sdcard/busybox /system/xbin
# cd /system/xbin
# chmod 755 busybox
# ./busybox --install
# mount -o ro,remount /dev/block/mtdblock6 /system
One thought at the end: How did you root?
I rooted by flashing "vunerable recovery" using RSD lite, copied milestone-root.zip to sd card, renamed it update.zip, rebooted into recovery mode, flashed update.zip from there.
I didn't realise I had to install something like open recovery, think because I remember not having to do that on my pulse? Anyway will try and install one of those now.
Thanks those commands at the end helped, actually managed to copy busybox to /system/xbin, however the 2nd last one "./busybox --install" gave me a load of errors -all being no such file or directory, for example "/usr/bin/wc: no such file"
about 30 of those path errors. Maybe the command path "./busybox" needs to be something else?
ah, okay. sorry, I thought you already installed an openrecovery. for many cool features you will need it (e.g. nandroid, for overclocking it's not a must but a nice-to-have). please don't use GOT, it's rather old already. androidiani is okay, I think.
I think your previous attempts to install busybox via the app etc. mixed up some internal links in the device. please reboot and try again (the above steps except the "cp ..."). seems like the app tried to install busybox to /usr/bin but failed... I hope this failed attempt will be fixed by a simple reboot. otherwise it would be great to have the output of:
Code:
# su
# ls /usr/bin
No I re-flashed my main sbf and also did a factory reset to do a clean start, only thing since that full wipe I have done is rooting in the method I described, installed the screenmode widget, textedit, and android terminal emulator.
I have no such file /usr, are you sure I should have this in droid/milestone?
Here is my full output of my root system using ls:
tmp
pds
cdrom
sqlite_stmt_journals
config
cache
sdcard
d
etc
system
sys
sbin
proc
init_prep_keypad.sh
init.rc
init.mapphone_umts.rc
init.mapphone_cdma.rc
init.goldfish.rc
init
default.prop
data
root
dev
perhaps "/usr" is a sub inside one of the above folders? I tried using "find" to find it but that command dosn't seem to work since it won't even find the ones I can see with ls
I found it, /usr is inside /system... so if busybox was moved to /system/xbin, I'm guessing the ./ means install it to the parent directory which was /system which /usr is also in.
The errors I got said no such file "/usr" so It seems like it is trying to install to the wrong directory.... perhaps the command should be "busybox --install" or "/busybox --install" I don't want to experiment and mess things up before your opinion on this.
*edit almost forgot, output of /system/usr is
keychars
bin
srec
keylayout
share
output of /system/usr/bin is
panic_daemon
gki_pd_notifier
nvm_daemon
clean_dex.sh
brcm_guci_drv
bplogd_daemon
This is really strange. Maybe your busybox-file is corrupt.
Where did you download the busybox-file?
Which sbf did you flash?
So for explanation-purposes: When you put an executable or script file in any directory, you can execute it by first making it executable ("chmod 755 /system/xbin/busybox"), changing to that directory ("cd /system/xbin") and then executing it by adding "./" in front of it. The dot slash always stands for the _current_ directory. The _parent_directory has two dots "../".
If you want, you may try:
# /system/xbin/busybox --install
instead of
# ./busybox --install
Or maybe try this one:
# /system/xbin/busybox --install -s /system/xbin
Last time, I installed busybox into the directory /data/busybox, which worked brilliantly, but this path turned out to be unpractical. So I wanted to reinstall it in a different directory. I removed everything from /data/busybox including the directory itself and tried to start the whole procedure with /system/xbin. But that time it protested, that there were no files in "/data/busybox/...". Conclusion: The last busybox-install affected the second one. When I remember correctly I rebooted after that and used the app from the market *g*
My main sbf I flashed was android 2.1(uk version).
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
I also managed to install open recovery and do a nandroid backup succesfully
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Thanks for all your help so far.
droidtech1 said:
My main sbf I flashed was android 2.1(uk version).
Click to expand...
Click to collapse
Don't want to try one of the 2.2?
droidtech1 said:
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
Click to expand...
Click to collapse
Yes, this sounds very much like installation was successful.
droidtech1 said:
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
Click to expand...
Click to collapse
typing "busybox" without the path in front of it worked, because busybox is in the directory /system/xbin, which is already in your $PATH-variable (try "echo $PATH"). So the command interpreter (shell) will automatically look up "busybox" in /system/xbin.
I had a look at the busybox syntax and it's actually
Code:
busybox --install [-s] [INSTALLDIR]
So you have to put the directory you want to install in at the end. That's what your last command makes use of
droidtech1 said:
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Click to expand...
Click to collapse
Sounds like this is just the state, when shell is busy, i.e. when the last process you started is still running and no prompt ($ or #) is displayed. You may kill the last process in linux using CTRL+C, which will hopefully bring back the shell prompt. No idea which shortcut replaces this on the milestone/droid. I never use any android terminals, but only the ADB-Shell: http://developer.android.com/guide/developing/tools/adb.html
I'm learning to build apps for android so I thought having 2.1 on my droid would be better for testing (instead of 2.2). I also have a Nexus-S with 2.3 and a tmobile-pulse with 1.5. So I want to keep the most native version on each phone since most consumers won't install custom roms, although some will get updates anyway.
I use my droid a lot when I am out and use the terminal a lot so having busybox too has given me more to play around with. I actually find my droid much better working on than the nexus s, love the keyboard and dpad.