Related
Ok, I have a phone with unlocked boot loader and FRF50 on it.
I put the original system recovery on (it had another prior to my ownership), but when the OTA update arrives, I get the following error:
Verifying current system...
assert failed: apply_patch_check("/system/framework/am.jar", "efccd3...:, ea...: )
E: Error in /cache/836691a1ca8b.signed-passion-FRF91-from-FRF50.836691a9.zip
(Status 7)
Installation aborted...
Any ideas???
Thanks!!!
have you tried doing the line of updates start from frf50 then do frf83 then frf83b then do frf91
No, but based on the error it looks like it was trying to go from FR50 (installed) to FRF91 based on the update file name....
I'm not doing this manually, I'm letting the OTA update take care of it....
Can you point me to the update images? I'd like to get it to do OTA updates again, but if I have to do manual I guess I'll deal with it...
I wonder if it is a problem with the v 2E recovery?
Hey Pete,
I am getting the exact same issue with my nexus over here in Oz. I jumped on the early release and manually installed and now it wont update from frf50-frf91 OTA with the above error.
Very frustrating. I wondered if a wipe data/factory reset then wait for another OTA might work. I am unsure of exactly how much that will affect the phone though. I would rather not lose pictures and movies on the SD card and apps would be a PITA to get back on with my settings.
Maybe the manual updates might be a good place to start.
What version of the recovery do you have on your phone?
pwkpete said:
What version of the recovery do you have on your phone?
Click to expand...
Click to collapse
I am a bit of a noob Pete when it comes to Android and Nexus. I am not sure on the version or even how to check. Can you give me a hint ??
I have an un-rooted stock phone which I downloaded the FRF 50 update to when it first came out. I have made no other changes to it.
Give me a call centre skills based routing or call recording system and I'm your man, but smart phones are not in my skillset... I am trying to learn though. I just learnt what the ADB is.
you are on stock recovery and rom...and you wont anything in your SD card it doesnt wipe sdcard, only the phone setup, and if you have the backup feature on phoen you wont really lose the apps either
you can always do the #*#CHECKIN#*# on dial pad then go to settings and check for updates to see if you can get the OTA
i did it mainually it i couldnt wait any longer for the OTA.. so its not really hard to do it maunally lol
Even if I do that with my FRF50 phone, it just says success...
It took a week for the OTA update to reattempt an install. (and fail)
I did download a full signed FRF91 which I'm going to try applying soon, I hope after that OTA's will just be automatic...
Fixed at last !!!
I went through this forum.xda-developers.com/showthread.php?t=717870
Which took me back to epe76. I then went to frf85b with a link further in the same thread and got an instant OTA update to frf91.
YAY FIXED !!!!!!!!!!!!!!!!!!!
Forgot to post here, I downloaded the complete FRF91 signed and just installed it. Contains everyting including radio.
I don't have the link anymore, but I recall it contained the words, "FRF91", "signed", "passion"....
That should get you there...
So I received a notification to download the 5.1 update this morning on my rooted Nexus 6. I proceeded to click download and then install.
However, due to that I had TeamWin recovery installed the update failed on reboot. (didn't even try to install)
Now when I click on "Check for updates" in About in System Settings menu. It says that there are no new updates??? Even though it failed to install.
Does anyone know where the update is stored on the device before installation? Maybe i need to remove it before it will try and update again? (now that i have flashed stock recovery)
Any help would be very appreciated.
You need to unroot too.
Ota can be downloaded online.
d1wepn said:
So I received a notification to download the 5.1 update this morning on my rooted Nexus 6. I proceeded to click download and then install.
However, due to that I had TeamWin recovery installed the update failed on reboot. (didn't even try to install)
Now when I click on "Check for updates" in About in System Settings menu. It says that there are no new updates??? Even though it failed to install.
Does anyone know where the update is stored on the device before installation? Maybe i need to remove it before it will try and update again? (now that i have flashed stock recovery)
Any help would be very appreciated.
Click to expand...
Click to collapse
Once you remove root, try pulling your Sim and rebooting. Let the phone sit, without Sim, and see if update reappears.
rootSU said:
You need to unroot too.
Ota can be downloaded online.
Click to expand...
Click to collapse
I was hoping to use the factory OTA update method for a change. (Always manually update) But might just be easier.
Downloading OTA now. Thanks for the advice rootSU
Evolution_Freak said:
Once you remove root, try pulling your Sim and rebooting. Let the phone sit, without Sim, and see if update reappears.
Click to expand...
Click to collapse
Might give this a try first. Worth a shot. Cheers mate.
OTA update downloads to system/cache folder ... It may get deleted soon after you try installing and restart the phone. You need rooted phone and a file explorer like es file explorer for accessing system folder.
Sent from android one lollypop 5.1
---------- Post added at 12:47 AM ---------- Previous post was at 12:38 AM ----------
Check first whether you have it in your phone already. Rooted phone go to /cache folder you'll find something.Zip there.
Ok so i managed to get the phone to download the OTA again and attempted to install it again. This time with stock recovery.
Everything was looking good but it fails with "error" below the android logo.
Any ideas?
Sorry I can't help you. I don't want that AT&T 5.1 update. So I did what you did and hit install. It of course didn't. I use TWRP also. But the damn 5.1 update is back!
Tappin from my Nexus 6
Any reason you want the OTA? you can install the factory image from here and get the same result without mucking around...
https://developers.google.com/android/nexus/images
Gage_Hero said:
Any reason you want the OTA? you can install the factory image from here and get the same result without mucking around...
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Using a stock image will wipe the device each time. The posters question is even more valid now since Google's doing security patches every month.
I have the same issue & I wasn't able to find the .zip in /cache
Rocky1988 said:
Using a stock image will wipe the device each time. The posters question is even more valid now since Google's doing security patches every month.
I have the same issue & I wasn't able to find the .zip in /cache
Click to expand...
Click to collapse
You only need to flash the system.img file within the Google image using fastboot.
After that, boot into TWRP and reflash SuperSU, XPosed, and anything else you've flashed that resides in /system.
Wipe caches and reboot. Easy, and no app or data loss.
Rocky1988 said:
Using a stock image will wipe the device each time. The posters question is even more valid now since Google's doing security patches every month.
I have the same issue & I wasn't able to find the .zip in /cache
Click to expand...
Click to collapse
um.. you are quite a bit late. this is an old thread, look at the dates. you responded to a question thats 6 month old.
liquidzoo said:
You only need to flash the system.img file within the Google image using fastboot.
After that, boot into TWRP and reflash SuperSU, XPosed, and anything else you've flashed that resides in /system.
Wipe caches and reboot. Easy, and no app or data loss.
Click to expand...
Click to collapse
Except, to be more complete, it might be a good idea to flash everything except data and boot - that is, in case changes are made to radio or anything else, but if changes are done to boot and are required for system or kernel and you don't put stock boot, you're kinda screwed (you'd need a different version of twrp in this case and it probably won't be out).
My point, there really is no complete way to know if flashing just system is enough to get all the security updates unless you look at what the update replaces. That's why I'm looking for the ota.zip
Rocky1988 said:
Except, to be more complete, it might be a good idea to flash everything except data and boot - that is, in case changes are made to radio or anything else, but if changes are done to boot and are required for system or kernel and you don't put stock boot, you're kinda screwed (you'd need a different version of twrp in this case and it probably won't be out).
My point, there really is no complete way to know if flashing just system is enough to get all the security updates unless you look at what the update replaces. That's why I'm looking for the ota.zip
Click to expand...
Click to collapse
And thankfully Google put version numbers to the other files so takes about 15 seconds to realise you only need to flash system. If a change was made to radio you can still flash in exactly the same way as the system and not lose data...
Amos91 said:
And thankfully Google put version numbers to the other files so takes about 15 seconds to realise you only need to flash system. If a change was made to radio you can still flash in exactly the same way as the system and not lose data...
Click to expand...
Click to collapse
How do you check version numbers for the other files? This may be what I'm after!
Rocky1988 said:
Using a stock image will wipe the device each time. The posters question is even more valid now since Google's doing security patches every month.
I have the same issue & I wasn't able to find the .zip in /cache
Click to expand...
Click to collapse
I'm unable to find the latest update in the /system folder (/system/cache doesn't exist on my device) or the /cache folder either.
/data/data/com.google.android.gms/app_download/update.zip
d1wepn said:
Ok so i managed to get the phone to download the OTA again and attempted to install it again. This time with stock recovery.
Everything was looking good but it fails with "error" below the android logo.
Any ideas?
Click to expand...
Click to collapse
Use Flashify to install OTA updates instead.
At last i found it
I have clock work recovery installed on my phone. It refuses to update my OTA factory software update, i searched for it and installed it manually. It was in /data/data/com.tinno.systemupdate/files/googleota/0/update.zip
Here you can download OTA, fresh firmware or system image to update your device.
OTA_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.19.401.2-2.18.401.3_release_448048.zip [41.2 MB]
firmware.zip only [19.6 MB]
2.19.401.2_boot_system_2015-09-21--20-48-04_KOT49H.zip [TWRP] [1.15 GB]
Downloads: mega
Let's see what's underneath
Main difference, I believe, is a security fix (libStageFright). I assume, that's it:
/system/framework/android.policy.jar
/system/framework/conscrypt.jar
/system/framework/framework3.jar
/system/lib/modules/moc_crypto.ko.sig.3.4.10
Zip also contains lots of *.p files (odexes, apk, jars mainly). Viewable through windows explorer. Don't know, what's that. Looks like a hash or a signature.
OTA includes firmware.zip containing {boot, hboot, recovery}, which can be opened through WinRAR (7Zip 15β failed). If you want just firmware, take it. Should be fastboot flashable.
*Additional notes*
Next lines describe my experience before I returned the device state to nearly stock.
Hello there. )
Want to share my experience. I have 2.18.401.3 and got promt to upgrade to 2.19.401.2.
Basically, as I get it, you need original recovery and that's it. (Pushed original kernel just in case. Also device is unlocked (tampered))
But under updating process the script mechanism checks some files to be original. Many system odexes, framework stuff and some libs.
My update failed on checking Books.odex (meanwhile, this app was deleted and redownloaded as user-app)
So, I might try to edit updater-script later or just copy files from update to folders they belong. The ota got a simple and obvious updater script for people who used to deal with them before. I'm considering delete parsing part or just push on screen what gives fail, but let updating happen. Need to be tested with system backup.
city2026 said:
OTA_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.19.401.2-2.18.401.3_release_448048.zip [41.2 MB]
Download: mega
Let's see what's underneath
Main difference, I believe, is a security fix (libStageFright). I assume, that's it:
/system/framework/android.policy.jar
/system/framework/conscrypt.jar
/system/framework/framework3.jar
/system/lib/modules/moc_crypto.ko.sig.3.4.10
Zip also contains lots of *.p files (odexes, apk, jars mainly). Viewable through windows explorer.
OTA includes firmware.zip containing {boot, hboot, recovery}, which can be opened through WinRAR (7Zip 15β failed).
*Additional notes*
Hello there. )
Want to share my experience. I have 2.18.401.3 and got promt to upgrade to 2.19.401.2.
Basically, as I get it, you need original recovery and that's it. (Pushed original kernel just in case. Also device is unlocked (tampered))
But under updating process the script mechanism checks some files to be original. Many system odexes, framework stuff and some libs.
My update failed on checking Books.odex (meanwhile, this app was deleted and redownloaded as user-app)
So, I might try to edit updater-script later or just copy files from update to folders they belong. The ota got a simple and obvious updater script for people who used to deal with them before. I'm considering delete parsing part or just push on screen what gives fail, but let updating happen. Need to be tested with system backup.
Click to expand...
Click to collapse
My update stopped for "basicdreams.odex". If you are able to get the update flashed do let the community know
TWRP system backup added
csoulr666 said:
My update stopped for "basicdreams.odex". If you are able to get the update flashed do let the community know
Click to expand...
Click to collapse
I tried to update from recent backup (the one before I changed kernel and deleted system apps), but facebook.odex didn't let me.
Finally, the very first backup did it. I took only system and boot, switched twrp recovery to htc, skipped all setup and installed OTA over fresh system.
Here you go. Now you have TWRP image of this update.
BTW, kernel version is different. CL build number is the same.
Hi,
can't I just flash it somehow with TWRP?
The standard update way does not work for me, because of changed *.odex files.
Already tried to flash original recovery etc.
Thanks
ash0r said:
Hi,
can't I just flash it somehow with TWRP?
The standard update way does not work for me, because of changed *.odex files.
Already tried to flash original recovery etc.
Thanks
Click to expand...
Click to collapse
Unfortunately you cannot flash this with TWRP.
Is there a possibility to install this update (or any OTA updates) without having a "not-touched" system?
I could of course flash the TWRP recovery (what I've already done - it worked) but in that case I lose all my modifications. Is it possible to restore the TWRP recovery from that post and afterwards restore my own recovery without overwriting the system files which are needed to be up to date?
Thanks
ash0r said:
Is there a possibility to install this update (or any OTA updates) without having a "not-touched" system?
I could of course flash the TWRP recovery (what I've already done - it worked) but in that case I lose all my modifications. Is it possible to restore the TWRP recovery from that post and afterwards restore my own recovery without overwriting the system files which are needed to be up to date?
Thanks
Click to expand...
Click to collapse
You can try to restore the TWRP backup in the post. And yes, you will lose every mod since it is a backup of the stock, unrooted firmware.
The main problem of flashing the OTA zip would be that you will have to relock the bootloader before installing . So if you unlock it again, the internal storage will be wiped. The best way is to backup everything(Including the internal storage) and then proceed.
Actually, you can save your data while upgrading from non-worthy stock.
So, you may do this
Full backup, you never know what can go wrong.
Save or make a note of what you changed by yourself in system (from busybox to xposed & various modes.). You may use TB for sys-apps and simple file copying for modes. *
Restore updated system image from 1st post, so you have updated system.
See if it worked out and restore/reinstall your other system stuff.
* Remember, you still may access files of your twrp backup images through some archiver. Like I do using 7-Zip.
It's very important to save backup somewhere, cause it might be that my image can be not absolutely clean or can be not absolute right for your phone (like sell location difference). So it'll be easy to return back to working machine.
For this purposes I also setted up my TB for daily auto-backup of texts and settings and weekly backup of apps.
---
Don't sure about relock for upgrading. It seems to be launching, but it needs pure system and original boot & recovery. Some fastboot-magic helps here. That's how I did it after restoring to the very first backup.
So I have build number 2.18.161.3 rooted software on Vodafone, and received an OTA update build number 2.18.161.5-2.18.161.3. Obviously when I come to update it it goes to my custom recovery and can't go any further.
A couple of queries though I wanted to delete all the bloatware from my stock rom, after rooting I found I needed to S-Off as the bloatware keeps coming back on reboot so here are my queries.
Can I delete the APK files from the new OTA update and will this remove them if I install the OTA as a zip through custom recovery. Or can I use this update to wipe the bloatware from it all advice would be helpful
The Watergod said:
So I have build number 2.18.161.3 rooted software on Vodafone, and received an OTA update build number 2.18.161.5-2.18.161.3. Obviously when I come to update it it goes to my custom recovery and can't go any further.
A couple of queries though I wanted to delete all the bloatware from my stock rom, after rooting I found I needed to S-Off as the bloatware keeps coming back on reboot so here are my queries.
Can I delete the APK files from the new OTA update and will this remove them if I install the OTA as a zip through custom recovery. Or can I use this update to wipe the bloatware from it all advice would be helpful
Click to expand...
Click to collapse
For bloatware removal just push a custom boot.img. Liberty kernel or dt2w presented here works fine, you may try them at least with making a backup of original kernel at first. (Custom made kernel might give you permission to write to /system without being s-off.)
I used liberty one, recently flashed the one with double tap to wake, works perfectly fine. Even sd is fine.
I'm not into kernels, perhaps as long as they suit your device they are fine.
OTA have its script, if it has such strings or if you write it into the script, you may delete some apps. Maybe, didn't try nothing with ota scripting. It easier to find working universal bloatware removal script as flashable zip package.
Otherwise, ota just adds some stuff or replaces current stuff.
My htc one mini 2 is all stock. Software number is 1.16.61.2 and my fon cant to update software. Please help. Sory for my english.
keninzeg said:
My htc one mini 2 is all stock. Software number is 1.16.61.2 and my fon cant to update software. Please help. Sory for my english.
Click to expand...
Click to collapse
Did you buy your phone from a carrier? Carrier phones get different software updates
csoulr666 said:
Did you buy your phone from a carrier? Carrier phones get different software updates
Click to expand...
Click to collapse
I bought it used, it has installed EE application from the UK. So is there a way to update. Thanks a lot...
I tried to install OTA_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.16.401.1-1.16.401.2_release from stock recovery and failed.
keninzeg said:
I bought it used, it has installed EE application from the UK. So is there a way to update. Thanks a lot...
I tried to install OTA_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.16.401.1-1.16.401.2_release from stock recovery and failed.
Click to expand...
Click to collapse
If it has EE applications then it is an EE branded phone. Your updates will arrive differently and will have a different software number. So using the Europe zip will not help.
city2026 said:
For bloatware removal just push a custom boot.img. Liberty kernel or dt2w presented here works fine, you may try them at least with making a backup of original kernel at first. (Custom made kernel might give you permission to write to /system without being s-off.)
I used liberty one, recently flashed the one with double tap to wake, works perfectly fine. Even sd is fine.
I'm not into kernels, perhaps as long as they suit your device they are fine.
OTA have its script, if it has such strings or if you write it into the script, you may delete some apps. Maybe, didn't try nothing with ota scripting. It easier to find working universal bloatware removal script as flashable zip package.
Otherwise, ota just adds some stuff or replaces current stuff.
Click to expand...
Click to collapse
Excellent thanks for the reply so in short,
Grab the downloads from above (4 in total?)
Push and override existing TWRP recovery back to stock recovery (Dumbass Details would be helpful as I have not done this in ages)
copy the ADB the new rom to the phone (Again please forgive me as I have not done this in a few years need a memory jog)
Again thanks in advance
The Watergod said:
Excellent thanks for the reply so in short,
Grab the downloads from above (4 in total?)
Push and override existing TWRP recovery back to stock recovery (Dumbass Details would be helpful as I have not done this in ages)
copy the ADB the new rom to the phone (Again please forgive me as I have not done this in a few years need a memory jog)
Again thanks in advance
Click to expand...
Click to collapse
If you'll ask more specificly, I'll provide even shorter reply. )
As I get it, you ask for some short check-list / instruction
You need one of three files I uploaded, based on what do you want. )
You can flash big 1 gb system image v2.19.401.2 through twrp.
You can grab small upgrade package and update your 2.18.401.3 by yourself to have 2.19.401.2. Original firmware and fresh rom state might be needed.
You have other needs, you need just freshest kernel or etc., you grab firmware package and try hook it with bootloader or unzip and get the thing you need.
Pick the option and I'll write simple instruction.
I forget to read your previous post. ) So, you have 2.18.161.3 Vodafone. With root privileges (half-root, I assume)
So, yes, you need to restore original recovery of yours. Then it could handle the ota. If you can get it somewhere, you can update. You can get it in vodafone firmware (big package with everything) or if someone made recovery backup earlier.
My upload contains files for non-locked (operator's) devices.
As long as your phone has operator's rom, I can't give you proper advice. I assume, other recoveries/kernels/etc. might not be ok with your device due to hardware lock or difference.
But you can try always, if you sure you can handle it and revert or if you read on your situation enough. I can't advice you here on 100%.
But. If device is just a device, and roms are just roms (and some operator's special version is just a rom), you can flash other system and kernel and see what happens.
You may do a complete backup and save it somewhere and do one of the following:
Flash firmware.zip* contents, then go to TWRP and format all partitions except sdcard, then flash system image from above.
Just flash some custom 5.1.1 release. I use NostromoPop. It much smoother and it's lollipop.
*Firmware.zip contains boot, hboot, recovery. All that was for 2.19.401.2 but presumably can work separate. So you can get what you want and flash through adb. Like boot and hboot for proper device work on 2.19.401.2, or just recovery to try your vodafone ota w/o dramatic changes.
For futher safeness, you can backup hboot and boot or what you want.
I can recommend you to try custom sense-kernel for system write privileges.
city2026 said:
If you'll ask more specificly, I'll provide even shorter reply. )
As I get it, you ask for some short check-list / instruction
You need one of three files I uploaded, based on what do you want. )
You can flash big 1 gb system image v2.19.401.2 through twrp.
You can grab small upgrade package and update your 2.18.401.3 by yourself to have 2.19.401.2. Original firmware and fresh rom state might be needed.
You have other needs, you need just freshest kernel or etc., you grab firmware package and try hook it with bootloader or unzip and get the thing you need.
Pick the option and I'll write simple instruction.
I forget to read your previous post. ) So, you have 2.18.161.3 Vodafone. With root privileges (half-root, I assume)
So, yes, you need to restore original recovery of yours. Then it could handle the ota. If you can get it somewhere, you can update. You can get it in vodafone firmware (big package with everything) or if someone made recovery backup earlier.
My upload contains files for non-locked (operator's) devices.
As long as your phone has operator's rom, I can't give you proper advice. I assume, other recoveries/kernels/etc. might not be ok with your device due to hardware lock or difference.
But you can try always, if you sure you can handle it and revert or if you read on your situation enough. I can't advice you here on 100%.
But. If device is just a device, and roms are just roms (and some operator's special version is just a rom), you can flash other system and kernel and see what happens.
You may do a complete backup and save it somewhere and do one of the following:
Flash firmware.zip* contents, then go to TWRP and format all partitions except sdcard, then flash system image from above.
Just flash some custom 5.1.1 release. I use NostromoPop. It much smoother and it's lollipop.
*Firmware.zip contains boot, hboot, recovery. All that was for 2.19.401.2 but presumably can work separate. So you can get what you want and flash through adb. Like boot and hboot for proper device work on 2.19.401.2, or just recovery to try your vodafone ota w/o dramatic changes.
For futher safeness, you can backup hboot and boot or what you want.
I can recommend you to try custom sense-kernel for system write privileges.
Click to expand...
Click to collapse
Sorry to be a pain and your help is invaluable but just trying not to screw this up, My phone has been unlocked to all networks, and I would like either a stock rom bloatware free or a custom sense rom.
The phone is still S-On but I have unlocked the bootloader (Obviously). I Kept the stock rom hoping to use titanium backup to remove the bloat however I quickly found out the phone needed to be S-Off to remove it completely because as soon as the phone rebooted the bloatware re-installed it's self.
This is how I have the OTA update sat on my phone, I only Rooted for SU privs and put on TWRP everything else was stock. I did as a question in another post "Could I remove the APK from the OTA Zip on my phone then install it using TWRP and would that remove the bloat" but no response to that one.
Any help would be greatly recieved
The Watergod said:
Sorry to be a pain and your help is invaluable but just trying not to screw this up, My phone has been unlocked to all networks, and I would like either a stock rom bloatware free or a custom sense rom.
The phone is still S-On but I have unlocked the bootloader (Obviously). I Kept the stock rom hoping to use titanium backup to remove the bloat however I quickly found out the phone needed to be S-Off to remove it completely because as soon as the phone rebooted the bloatware re-installed it's self.
This is how I have the OTA update sat on my phone, I only Rooted for SU privs and put on TWRP everything else was stock. I did as a question in another post "Could I remove the APK from the OTA Zip on my phone then install it using TWRP and would that remove the bloat" but no response to that one.
Any help would be greatly recieved
Click to expand...
Click to collapse
Simply flash custom kernel: like liberty sense or stock sense w/ dt2w.
It will unlock the opportunity to write on every partition. I mean system, cache, etc.
The Watergod said:
Sorry to be a pain and your help is invaluable but just trying not to screw this up, My phone has been unlocked to all networks, and I would like either a stock rom bloatware free or a custom sense rom.
The phone is still S-On but I have unlocked the bootloader (Obviously). I Kept the stock rom hoping to use titanium backup to remove the bloat however I quickly found out the phone needed to be S-Off to remove it completely because as soon as the phone rebooted the bloatware re-installed it's self.
This is how I have the OTA update sat on my phone, I only Rooted for SU privs and put on TWRP everything else was stock. I did as a question in another post "Could I remove the APK from the OTA Zip on my phone then install it using TWRP and would that remove the bloat" but no response to that one.
Any help would be greatly recieved
Click to expand...
Click to collapse
Hi
I will assume you have the virus I have been seeing lately that wouldn't allow you to reset the phone, where in reset option the automatic restore option remains checked and you can't uncheck it.
The only solution is through TWRP, you need to enter TWRP, erase Cache, Data, System then flash the Lollipop ROM again or stock from here: http://forum.xda-developers.com/one...one-mini-2-t3250020/post63859743#post63859743
So there is no Rom available that's pretty much stock without bloatware that I can install with twrp? If not is there some idiots guide to putting my stock recovery back on thank you all again
Hi,
Sorry of this is a bit of a newbie question but:
What is the purpose of each of the 3 different update zip files ?
And do I have to apply them all - and in what order ?
In my case, I am about to update to B389, and I have downloaded 3 files for VIE-L29C636B389 (currently on VIE-L29C636B130), and I have an update.zip, an update_full_VIE-L29_hw_spcseas.zip and an update_data_full_public.zip.
I was planning on doing the first two by the dload method (with reboots in between), but the update_data_full_public.zip doesn't appear to have an update.app, so how do I load that ? (I do have TWRP on my phone, so could probably figure it out - eventually).
Cheers,
SZ
same question
I read somewhere that it should be flashed in that exact order. i'm guessing that is the same procedure as with auto OTA updates, except now we have rooted phones, so bye-bye to auto updates. I am currently on VIE-L29CB636B387 and i received an automatic Huawei notification of a new version (VIE-L29CB636B388) about a week ago. I tried to update to that version in System Update-Quick Update, but that didn't work (surprise!). There was no issue though as when I rebooted it just went back to 387. However, I now have a red "New Version" notification in my System Update. Please tell me how your upgrade went if you went ahead and flashed 389. I have the three files already from filefinder, i also have TWRP and/or I could use adb fastboot to install. Thanks in advance.
Hey,
I am not sure I want to proceed on the basis of something that somebody 'read somewhere' ....
Anyhow - I've not run these updates yet, as I wanted to backup my phone first, but TWRP keeps blowing up with an error in the middle of the backup, so I am not going to try anything until I get to the bottom of that.
Will let you know if/when I ever go ahead!
Cheers,
SZ
Hi,
TWRP blowing up during NAND backups? thats not a good thing. Upon the advice of a forum member (xzanium) I flashed TWRP 3.1.1-1 instead of TWRP-3.2.1-0-vienna. No hitches so far, solid backups and no hiccups in flashing SuperSU, also got xposed to work seamlessly and other stuff. I hope you are able to resolve the issue you mentioned and get around to getting VIE-L29CB636B389 on your phone.
Well good luck to you, and post here any progress if you would.
SZ,
I have an idea on what the purpose of each of the 3 different update zip files are for and whether you have to apply them all - and in what order.
Since I could make a NAND backup using TWRP without issues, and there was an OTA update notice for an upgrade to VIE-L29CB636B388 which I couldn't upgrade to while rooted, I decided to unroot in order to upgrade to that. First i did the requisite steps - uninstalled the xposed framework and proceeded with the full unroot with SuperSU. Then I performed the dload method to flash the update.app that I extracted from the update.zip.
It was here where i hit a snag. What followed was, I found out that Huawei needs a verified stock rom, meaning it has to be a fullOTA-MF-PV in order that the bootloader could be relocked. So I tried my luck and downloaded the stock ROM VIE-L29C636B370 and flashed that. Success! From there, and several auto upgrades later I was back to L29C636B370. Reinstalling my Google account also locked back FRP. At this point i am full stock EMUI 5
Now, to answer your question. When I tried to upgrade to VIE-L29C636B388 via system update quick update. I only saw one file - update.zip therefore this must the only one needed for incremental patches. The same holds true with update_data_full_public.zip as I later learned when I decided to use the proxy upgrade method in MT filefinder . It applied a 2nd patch. The third file, namely, update_full_VIE-L29_hw_spcseas.zip was not required for this incremental update. In fact, the update process was cut short and an error message appeared that the file could not be located, even though i copied that to the HwOUC folder. It appears that this was deleted before the fullOTA update could finish during the incremental update process. Clearly, this last zip is not necessary for incremental updates. So this must be the package which delivers the rest of the ROM, or the parts of it that needs to be changed.
So, obviously what "I read somewhere" was legit. I hope that answers your question.
cheers!
mm
I went to check for system updates today and my pixel initially started to download the latest patch and then after a couple of seconds went straight to telling me that there is no update available. Anyone else have this issue and/or successfully update to the March 2020 OTA via the process below?
Updating Phone Once Rooted:
- Check for device updates, when found:
- Tap uninstall in 'Magisk Manager'
- Tap restore images
- install OTA (do not reboot)
- Back to magisk, tap install > select install to inactive slot
- When magisk installed, press the reboot button in it. It'll force to the other slot AND you'll be updated AND rooted
I assume I should be able to go under 'System' -> 'Advanced' and get the OTA under 'System Update'. I've already disabled 'Automatic system updates' under 'Developer Options'. Just making sure google is somehow not blocking the update on rooted devices and that the above steps are correct. Thank you in advance!
Found similar thing on reddit here.
It's very common for unlocked and rooted Pixel phones to not "find" or complete the monthly OTA updates. There must be some sort of check in the OTA process that fails on rooted phones.
You should get familiar with the "sideloading" process of manually flashing OTA images.
Here is a set of instructions that I wrote in my Pixel 3a rooting guide. The process is exactly the same for the Pixel 4 series.
Taking an OTA update should be as easy as the above instructions. However there is another option available to install an OTA update called sideloading. Sometimes the update doesn't appear on the phone in a timely manner and you may want to manually install the update. Other times the OTA update seems to fail for some reason. In the end, you may decide to sideload the OTA instead of trying get it via the update feature on the phone. Surprisingly, it's actually faster to install the update via sideloading than it will be to take the OTA normally. I'll walk through the sideloading steps.....
Optional Step 1 - Uninstall Magisk (so that it restores the stock boot.img). If you find yourself unable to boot into recovery, you will have to restore the stock boot.img. I've run into this issue on some Android 10 images, but not all.
Step 2 - Download to your computer the correct OTA image from here
Step 3 - Connect to your phone via ADB on your computer. You should see the device listed if you type the command "adb devices".
Step 4 - Boot your phone into recovery (type the command "adb reboot recovery").
Step 5 - The phone will have a green android robot with a red sign over it's open access panel. Press the power button and then the volume up button while still holding down the power button.
Step 6 - Select "Apply update from ADB" using the volume buttons to highlight the choice and the power button to select it to enter the sideload mode.
Step 7 - Using your computer, type "adb sideload ota_file.zip" where ota_file.zip is the name of the OTA file you downloaded in step 2.
Step 8 - Once the update finishes, reboot the phone to complete the update process. (See note below about initial boot times).
Step 9 - To obtain root again, please use one of the two root methods listed above
Please note, the initial boot may take quite a while. I've seen the process take upwards of 20 minutes and longer. I think part of the reason it can take so long is that it optimizes the apps during this boot process. The more apps you have, the longer the process may take. When you take a regular OTA update, the phone will change to a screen where is specifically tells you it is optimizing the apps and counts up as the apps are optimized to give you status updates. When you use the the side-load method, it all happens with just the regular boot animation running and without any status updates. Because of this, it is easy to assume something has gone wrong with the boot process while in fact the phone is working through the process normally. If it isn't boot looping (showing the initial power screen before moving back to the boot animation), everything is fine and you just be patient and let the phone complete the process.
Click to expand...
Click to collapse
sic0048 said:
It's very common for unlocked and rooted Pixel phones to not "find" or complete the monthly OTA updates. There must be some sort of check in the OTA process that fails on rooted phones.
You should get familiar with the "sideloading" process of manually flashing OTA images.
Here is a set of instructions that I wrote in my Pixel 3a rooting guide. The process is exactly the same for the Pixel 4 series.
Click to expand...
Click to collapse
Thanks for the reply! I'm very used to sideloading/dirty flashing the updates, was hoping to use the Magisk method . Seems like google is getting smarter with their updates. I am guessing the current inability to see the OTA is due to the updates with google pay and google wanting to ensure banks it is safe.
I just finished sideloading March's OTA and patching the boot.img and everything seems to work, just a bit more effort than leveraging Magisk.
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
I experienced same exact thing. Looks like it saw the update at first then after a few seconds reverted to No updates available. About to try uninstalling Magisk, if no bueno, then gonna just sideload.
Spookymyo said:
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
Click to expand...
Click to collapse
Did you disable 'Automatic system updates' on the phone? That should still allow the download to occur just not the install. It seems like google got smarter with this update to detect rooted phones.
Gooch4130 said:
Did you disable 'Automatic system updates' on the phone? That should still allow the download to occur just not the install. It seems like google got smarter with this update to detect rooted phones.
Click to expand...
Click to collapse
Yes I disabled automatic updates. It didn't do it automatically, I clicked the check for update button. Normally when I do that it says there's a download available and then I know to check online for the flash file. This time it updated without stopping.
FAILED (remote: Failed to write to partition Not Found)
what i am doing wrong ????
---------- Post added at 12:21 PM ---------- Previous post was at 12:17 PM ----------
Boot loader is unlocked...
10.0.0 (QQ2A.200305.003, Mar 2020, All carriers except AT&T)
this version i did ota update
i am from germany.
okay, i found a way to root, but how is it with safety net fix ???
anyone an idea ???
Deleted
Spookymyo said:
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
Click to expand...
Click to collapse
It installed the OTA for me too, now I'm afraid to restart my phone.
mattcoz said:
It installed the OTA for me too, now I'm afraid to restart my phone.
Click to expand...
Click to collapse
I would flash Magisk again before you restart.
I still can't get my phone rooted. I'm not sure what's going on. I wonder if other people have been able to successfully root the March update.
I successfully rooted the March update, using the boot.img method.
Spookymyo said:
I would flash Magisk again before you restart.
I still can't get my phone rooted. I'm not sure what's going on. I wonder if other people have been able to successfully root the March update.
Click to expand...
Click to collapse
I rooted with boot.img method, as well
sruel3216 said:
I rooted with boot.img method, as well[/QUOTE
I ended up following this
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Click to expand...
Click to collapse
I got it rooted. It ended up taking a factory reset. It must have been some file interfering with the process. Once I reset my phone the rooting process went without incident.
As I'm searching for a more Phone based update wy, I'm thinking about to use maybe the Implemented OTA Process, but download the OTA-File manually... But for that We must know,how the OTA process is working. Did someone know:
- Where the update stores the download fine (I found a OTA and a OTA_Packge directory in the /Data/ folder)
- is there maybe a setting or information which must be injected somewhere (maybe a txt file)
- after that the ota update could then maybe started by hand
Has someone informations on that? If maybe someone where the ota still works and stil has root could check the files and places?
Chris.C said:
sruel3216 said:
I rooted with boot.img method, as well[/QUOTE
I ended up following this
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Click to expand...
Click to collapse
Worked like charm!! Thanks!! :good:
Click to expand...
Click to collapse
I unlocked the bootloader, sideloaded the August 2020 OTA and flashed the patched boot image. Kept bootlooping, then I restored to the original, booted in, installed Magisk Manager and then flashed the patched image again. Just leaving this here in case it helps someone.