i got this msg while im trying to unlock the bootloader...what to do now????
You must restart adb service. Open Task Manager and end all adb.exe process, then unlock bootloader again. Adb service will restart automatically.
Related
ok when i try to use the adb commands it til me its offline how do i get it back online
open up task manager on your computer and end the process adb.exe then try it.
thz
ok
will do
sorry but where do i find task manger on my PC
ctrl+alt+delete
its working now thz alot
no problem, i got to figure that one out myself it happened to me when adb recognized my device as being connected twice somehow
MY ADB has stopped Working
It happened after Installing the CWM And TWCR
Well What happened it was saying ADB was outdated while installing but it installed CWM and TWCR
Now if i enable ADB in the phone the windows doesnt read that there is a mobile nor anything detected not even charging
When i disable ADB I can see my phone charging and i can transfer files
I don't know what to do and I am very worried ...
Hope If any1 could help...
Tried installing ADB drivers and the Android SDK .. No luck
I think the problem is in the phone as it doesnt allow me to connect to the PC with ADB on
I read this http://forum.xda-developers.com/showthread.php?t=1917741
and found that ro.debuggable=0 in the Deafult.prob While it is enabled ...
And there is a question too how can i backup it so if i eddit it and get a bootloop I want to be able to restore using CWM or TWCR
John98Zakaria said:
MY ADB has stopped Working
It happened after Installing the CWM And TWCR
Well What happened it was saying ADB was outdated while installing but it installed CWM and TWCR
Now if i enable ADB in the phone the windows doesnt read that there is a mobile nor anything detected not even charging
When i disable ADB I can see my phone charging and i can transfer files
I don't know what to do and I am very worried ...
Hope If any1 could help...
Tried installing ADB drivers and the Android SDK .. No luck
I think the problem is in the phone as it doesnt allow me to connect to the PC with ADB on
I read this http://forum.xda-developers.com/showthread.php?t=1917741
and found that ro.debuggable=0 in the Deafult.prob While it is enabled ...
And there is a question too how can i backup it so if i eddit it and get a bootloop I want to be able to restore using CWM or TWCR
Click to expand...
Click to collapse
Can you use adb over other computers?
Also, try ADB over network. Goto Settings > Developer Options and turn "ADB over network" on. If prompted with a warning, press OK. Then you will see an ip address with a port number under ADB over Network setting. Now open cmd (or Terminal in Linux) and cd to the directory where the ADB files are present. Then type
Code:
adb connect <ipaddress>
Of course, replace <ipaddress> with the ip that you see in the Developer Options under ADB over network. It should be something like "192.168.1.2:5555", enter the whole thing. Then see if you are successfully connected by typing
Code:
adb devices
.
If you are using windows go to control panel and look for "hardware" or more specifically "drivers". It is somewhere there, just look around and you will find it. Then enable adb and connect phone. Then Select your device name from the list and right-click and select appt. drivers.
ayushag96 said:
Can you use adb over other computers?
Also, try ADB over network. Goto Settings > Developer Options and turn "ADB over network" on. If prompted with a warning, press OK. Then you will see an ip address with a port number under ADB over Network setting. Now open cmd (or Terminal in Linux) and cd to the directory where the ADB files are present. Then type
Code:
adb connect <ipaddress>
Of course, replace <ipaddress> with the ip that you see in the Developer Options under ADB over network. It should be something like "192.168.1.2:5555", enter the whole thing. Then see if you are successfully connected by typing
Code:
adb devices
.
If you are using windows go to control panel and look for "hardware" or more specifically "drivers". It is somewhere there, just look around and you will find it. Then enable adb and connect phone. Then Select your device name from the list and right-click and select appt. drivers.
Click to expand...
Click to collapse
Thanks for the reply I can't use ADB anywere ..
The phone doesn't even appear in the PC with ADB debuging enabled not even a connected sound or anything ..
I tried Wifi Kontect on the playstore as I didnt find "ADB over Network" But ADB wont connect....
Any Other solutions ... I dont mind if i have ADB over wifi the important thing is to have any ADB connection
www .mediafire .com/convkey/fb15/db3ykaaldgkqsd66g.jpg?size_id=5
www .mediafire .com/convkey/93e0/49f47ps6s9nbeyj6g.jpg
Remove spaces so you can see the images I cant post links yet
Fixed
I have fixed my probem thanks to @sijav !
Installing
http://forum.xda-developers.com/showthread.php?t=1687590
Fixed everything ! even after un-installing the app
I got my phone unlocked and rooted. I installed CWM than I attempted to S-OFF.
First attempt - realized I had 2 problems.
1) I had HTC Sync Manager Installed
2) MY PC cmd/adb is wonky. It was constantly unable to recognized internal/external command. I checked my enviormental variable path and all that jazz and didn't find no solution. (WIN XP) I tried shift-right clicking on the folder and I do not have that option. I attempted to install a program that does that shift-right click feature and it didn't work. I went to Start>Run>cmd and input the entire path and it didn't work. I tried dragging the platform-tools folder into the cmd and it didn't work, HOWEVER when I dragged the adb.exe file on the cmd it ran.
So I began following the instruction.
a) (((Drag adb.exe into cmd window))) [creating the path/director] devices
[adb deamon server starts than device is found]
b) (((Drag adb.exe into cmd window again))) reboot
[phone reboots]
c) (((Drag adb.exe into cmd again))) wait-for-device push firewater /data/local/tmp
[different results from file not found, error command, wrong syntax, unrecognized batch
I attempted to do the same above with firewater.bin - file not found, doesnt exsist type of error.]
ragequit
ROUND 2
re-read guide and realize I had HTC sync manager installed. So I uninstalled it.
During this go around - it seemed to have gotten worse, multiple errors and headaches, I did click YES to everything during the htc syn unintallation so I might have uninstalled the drivers (it showed it was there, but the installer image looked blanked instead of the typical exe image). But I eventually I managed to push the firewater normally before failing on the adb shell command. I probably have pushed this file into data local tmp MULTIPLE TIMES
ragequit after many attempts
ROUND 3
uninstalled all HTC from my PC, unplugged USB, revoke usb priv, reconnect phone to pc - installed manager, waited 30 min, uninstall only the manager and kept the drivers and this time it looked normal and not a blank image. Had to repeat the same steps as Round 1, constantly moving my adb.exe into the cmd window.
a) (((Drag adb.exe into cmd window))) [creating the path/director] devices
[adb deamon server starts than device is found]
b) (((Drag adb.exe into cmd window again))) reboot
[phone reboots]
c) (((Drag adb.exe into cmd))) wait-for-device push (((drag firewater.file into cmd))) /data/local/tmp
[installed]
[During this time, my phone is going crazy - mounting/dismounting, htc manager trying to install, the stupid sync folder pop up multiple times..... Several times, I just ignored it and tried to continues, other times I wait until it's stable.. but at this point, I am not sure if I ****ed up]
d) (((Drag adb.exe into cmd))) shell
[The command went through but my phone never recieved a shell prompt as I have seen in a youtube video, I continued anyhow]
e) something something m8: [already there after I hit enter from shell command] su
[During, Before and/or After - my phone is still mounting/dismounting sometimes, I have waited patiently at times, and other times, I would try rush through all of this step impatiently, I was in hour 4 at this time, frustrated]
f) su
g) Here is where I had more issues, after SU, sometimes the pre-installed path/command is there for me to input chmod 755, sometimes it goes back to my default C:document.\etc\etc and I would either start from a or attempted to run adb shell, while my phone harassing me with the mount/dismount.
sometimes, I am able to type in chmod 755 /data/loc before I get booted back to the C:docu/etv/etc
other times it goes through fine but does that same ****.
ragequit
Round 9,000 (today)
I was calm, I waited until the mount/dismount stopped and it showed my phone was connected. I've done this 2 ways (htc syn usb mode and mount as disk drive)
I manage to get all the way to the end, typed in "Yes".... WHELP, can not install... T_____T
*epic ragequit*
So now, I am sure, I may have corrupted or dmg my data/local/tmp folder?????
What I am curious now is:
A) Can I do a Factory Reset?? Will I loose my Root and/or re-lock bootloader? Soft-brick?
B) If I can't Factory Reset, what can I do?
C) I also tried to OTA the system update and CWM is tellling me installation abort (no error code)
Also, I ran my Titanium backup to see if that would fix any corruption I may have done during the adb fiasco, attempted to install the OTA and still failed/aborted.
I just want to go back to Factory and use twrp/weaksauce or as I read, use another ROM (forgot whom) to get S-off as it worked for others. I can't Flash the current Sinister/Stock Rom since they are on the new 1.54.651.8 while I am on 1.12.xx.x....
frustrated and ready to ragequit again lol
I'm trying to get S-Off, but ADB is unable to communicate with my phone. 'adb devices' shows my phone with an offline status. I'm trying to use Rumrunner, my HBoot is 1.55. I've tried completely deleting Android SDK, restarting, and reinstalling. I've tried uninstalling drivers, restarting, and reinstalling. USB debugging is enabled. However, if I boot into bootloader, 'adb devices' and 'fastboot devices' are both able to identify and access the phone.
From the searching I've done, there's supposed to be a prompt on your phone requesting access for the adb server from the computer, but I haven't received any such prompt. Could the missing prompt be my issue?
Go to developer options on your phone and revoke USB debugging permissions. Also, update your adb to a recent version.
When I connect my S21U to the pc and start a command window, the list of devices says
device
emulator offline
trying to type in adb she’ll gets me the error “more than one device connected”
any idea what to do?
Try the newest minimal adb and fastboot.. Driver installed for your phone?
markotix said:
trying to type in adb she’ll gets me the error “more than one device connected”
any idea what to do?
Click to expand...
Click to collapse
Open task manager and look at 'Background processes'(phone unplugged from pc)) if you see adb listed in processes click
on it to highlight and click "End task". After that plug your phone into pc and try adb again.
You can also try 'adb kill server/adb start server"
What worked, was to end all processes in the task manager, which were responsible for my native instruments music controller.
thanks to everyone!!!
Did you have a list of which apps to disable?