I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
madguylb said:
I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
Click to expand...
Click to collapse
Hi there There the way to go is this. Pull battery count to ten replace battery and go to download mode (hold volume down press power on while hold volume down). Start odin make sure re-partition is uncheck extract the stock firmware you downloaded so you have a TAR file click on PDA in odin and navigate to that TAR file connect phone odin should react and a yellow square will appear with com 4 in it now press start . Thats it good luck
Don't think this post belongs in this section, it has no relations to development.
madguylb said:
I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
Click to expand...
Click to collapse
hAD same problem, solved it go here
http://forum.xda-developers.com/showthread.php?t=1413315
try to power cycle again.
thanks for all of u...but matter is solved
madguylb said:
thanks for all of u...but matter is solved
Click to expand...
Click to collapse
You could have got the same result by posting in the QandA section.
Related
Alrighty. The other night, I had download mode. I updated to a new Kernal.
Today I try to access it, and I have:
POWER RESET or UNKNOWN UPLOAD MODE.
Now, I've googled, and none of the threads really answer the question. What do I have to do to get into download mode to flash a new kernal?
thenashy said:
Alrighty. The other night, I had download mode. I updated to a new Kernal.
Today I try to access it, and I have:
POWER RESET or UNKNOWN UPLOAD MODE.
Now, I've googled, and none of the threads really answer the question. What do I have to do to get into download mode to flash a new kernal?
Click to expand...
Click to collapse
1. did you try pressing power button and volume down combination?
Oh... I'm such a fkn noob.
Thanks mate.
thenashy said:
Oh... I'm such a fkn noob.
Thanks mate.
Click to expand...
Click to collapse
It's all right. Nobody starts from 100 anyway. it's always 0. working up..
Hello guys, I am completely new to this forum, first post actually. I recently rooted my new Samsung Galaxy S2 and installed the latest Cyanogenmod7 for AT&T SGH-i777. Everything went fairly smooth and was not too difficult after hours of research. As I navigated the system I found some glitches and decided to go back to stock ROM. Being a noob, I think I installed the wrong Kernel while trying to revert. At this point, I am unable to do much more than get into clockwork mod recovery boot screen with power, up/down volume. While in the screen which is orange rather than blue before, up and down will navigate the options but tapping an option does nothing but reset back to the list. I can not reboot, power off or anything for that matter. I have been trying for hours to get into download mode and all I get is the Samsung Galaxy S2 and then a black screen like nothing has happened. For whatever reason the Samsung Boot screen says i9100 when my phon is SGH-i777 for AT&T. Not sure if what I am dealing with is a bricked phone or if I need some experiential knowledge within this forum to work magic. Any help with resolving this issue is greatly appreciated. Thanks in advance for any time given, Incloud!
Hope this is appropriate for this section.
After upgrading the firmware successfully according to odin our P1010 wifi-only galaxy tabs are stuck in an infinite reboot sequence that happens so quickly that we cannot use our galaxy tabs for anything. Right before it reboots we are all getting:
"Process android.process.media stopped unexpectedly. Try again"
This occurs immediately after the upgrade when you are doing the initial setup of the device. It is rebooting about every 15-30 seconds.
Please help us. We can still download using odin but we do not have the stock firmware. Someone out there help please. We are all going absolutely bonkers insane. Thx.
Try this : http://forum.xda-developers.com/showthread.php?t=961732
bongski55 said:
Try this : http://forum.xda-developers.com/showthread.php?t=961732
Click to expand...
Click to collapse
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
frootloops said:
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
frootloops said:
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
Did you solve your problem?
andrewin said:
Did you solve your problem?
Click to expand...
Click to collapse
no, i just gave up. my tab has been sitting on my desk for like 3 months unused. i guess i'll try recharging it if i can find it buried under the pile of papers and giving it another attempt at finding a solution.
not going to hold my breath tho... since it appears to be impossible to find the official united states p1010 firmware or whatever u guys call it.
bongski55 said:
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
Click to expand...
Click to collapse
sorry, didn't mean to offend you. i am just so utterly miserable about this device. i was so excited to get it, then i read about updating to fix some speed issues and increase battery life so i followed the guide and so i have only been able to use my device a total of about 1 day in about 5 months. very frustrating.
also, i am deathly afraid of "just trying" to flash anything as i dont want to make my device even worse than it already is.
i'll tell u one thing, i will never ever ever ever buy another samsung product again. they so very clearly dont give a rat's a** about the suffering of their customers. it doesn't matter if we did this to ourselves, they should still help. it is a stupid software fix that costs them nothing. do they think if they dont help us we will break down and buy a second one? i dont f'ing think so.
I had the same problem once.
Maybe the files are not matching like .PIT with Modem or bootloader thats why it keeps on restarting.
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
omr911 said:
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
Click to expand...
Click to collapse
Yea, this is the problem. Cant get United States region files. That is the whole issue.
SOLVED !!!
if you are having the infinite reboot problem on your US galaxy tab gt-p1010 do this:
1. download this rom (it is the hong kong rom)
http://www.multiupload.com/KJO2KALU2O
password: nomoreuncheckedfirmwares
2. put your tab in download mode by holding down the volume down button first then press and hold the power button.
3. start odin3 version 1.7, plug your tab into your pc.
4. verify you have the yellow in the ID:COM area in odin then select the pit file, the csc file and the pda file (the only file remaining) and hit start.
5. wait patiently while it downloads everything and reboots.
note that it will start up in chinese or japanese (not sure which, guessing chinese). also note that i am using windows xp, probably works in 32-bit windows 7 but may have problems with 64-bit windows 7. not sure cause i have not tried it. seems that i read that though.
good luck !!!
thanks to stsights for the solution and waqypaqy for uploading the file to a more accessible site!!! you guys make me more happy than u can possibly know...
frootloops said:
Yea, this is the problem. Cant get United States region files. That is the whole issue.
Click to expand...
Click to collapse
If US firmware is not available then install European Firmware
NO NO NO
omr911 said:
If US firmware is not available then install European Firmware
Click to expand...
Click to collapse
NO NO NO!!! This is what got the problem started in the first place. do NOT install european firmware on a US galaxy tab P1010. That will land u in infinite reboot hell. just dont do it.
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.
gtabspring said:
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.
Click to expand...
Click to collapse
I had a more complicated version of this. couldn't format, couldn't mount, nothing. My tab showed this, I tried flashing several different kernels/roms/cwm, everything, nothing. Actually made it worse. It got to a point where when I powered on, I only got the backlit softkeys. A few times I got a weird image I've never seen before. Something about bad or unknown upload mode (with a little droid in teh corner....should have taken a picture). And finally I would get nothing; HOWEVER, if I plugged my tab into my laptop and gave it a few seconds, ODIN would see it. I could try flashing a kernel, but it would never process, just hang at the first step so....
with the tab plugged into the laptop and ODIN showing a connection, I would hold VOL DOWN + POWER until I see it disconnect (this is evident of a power down since I have no lights to indicate that). Once it disconnects (yellow box disappears) you can let go of POWER but do NOT release VOL DOWN. It will reconnect shortly thereafter. You are now in Download mode (whether or not you actually see anything on the tablet. You can test this theory by flashing something. What fixed it for me? I downloaded firmware from samfirmware.com. Specifically I downloaded JJ7 v2.2 (full file name I used was P1000XWJJ7.rar) I think what made the difference was using all 3 files. I did not use a PIT file, I put P1000XWJJ7-REV03-ALL-CL669843.tar.md5 in the PDA box, MODEM_P1000XXJK5_REV_00_CL690077.tar.md5 for Phone, and GT-P1000-CSC-MULTI-OXXJK2.tar.md5 in CSC. I did NOT check repartition. Now, this was after I had tried several things like flashing PIT by itself, different stock kernels, full ROMs, etc.... This was the final step I took. Now I'm back to normal.
I'd be interested to see if this solves anyone else's problem. I am so thrilled that I just fixed my "bricked" tab (no power, no response, no apparent charging even) that I'm hoping my time and effort can help someone else.
Let us know what happens. I am actually scouring the forums now because I know at least 2 others were having similar problems as I and maybe this will help them as well.
BTW, I did lose EVERYTHING on the internal SD, including all my backups. Thankfully I always made backups to External
P.S. I should mention it is an AT&T (GSM) Tab.
swedishcancerboi said:
I had a more complicated version of this. couldn't format, couldn't mount, nothing. My tab showed this, I tried flashing several different kernels/roms/cwm, everything, nothing. Actually made it worse. It got to a point where when I powered on, I only got the backlit softkeys. A few times I got a weird image I've never seen before. Something about bad or unknown upload mode (with a little droid in teh corner....should have taken a picture). And finally I would get nothing; HOWEVER, if I plugged my tab into my laptop and gave it a few seconds, ODIN would see it. I could try flashing a kernel, but it would never process, just hang at the first step so....
with the tab plugged into the laptop and ODIN showing a connection, I would hold VOL DOWN + POWER until I see it disconnect (this is evident of a power down since I have no lights to indicate that). Once it disconnects (yellow box disappears) you can let go of POWER but do NOT release VOL DOWN. It will reconnect shortly thereafter. You are now in Download mode (whether or not you actually see anything on the tablet. You can test this theory by flashing something. What fixed it for me? I downloaded firmware from samfirmware.com. Specifically I downloaded JJ7 v2.2 (full file name I used was P1000XWJJ7.rar) I think what made the difference was using all 3 files. I did not use a PIT file, I put P1000XWJJ7-REV03-ALL-CL669843.tar.md5 in the PDA box, MODEM_P1000XXJK5_REV_00_CL690077.tar.md5 for Phone, and GT-P1000-CSC-MULTI-OXXJK2.tar.md5 in CSC. I did NOT check repartition. Now, this was after I had tried several things like flashing PIT by itself, different stock kernels, full ROMs, etc.... This was the final step I took. Now I'm back to normal.
I'd be interested to see if this solves anyone else's problem. I am so thrilled that I just fixed my "bricked" tab (no power, no response, no apparent charging even) that I'm hoping my time and effort can help someone else.
Let us know what happens. I am actually scouring the forums now because I know at least 2 others were having similar problems as I and maybe this will help them as well.
BTW, I did lose EVERYTHING on the internal SD, including all my backups. Thankfully I always made backups to External
P.S. I should mention it is an AT&T (GSM) Tab.
Click to expand...
Click to collapse
Thanks for the suggestion. I think your version of galaxy tab is different with mine and I am not sure that it will work. I am really desparate for solution. This disaster started when the tab's battery is low and suddenly off and when it's charged and turned on it bricked
Point being, tabs are tabs. You will need to use the same procedure, but a different ROM that is designed for your tablet. Go there and find a ROM. There is a thread about unbricking your tablet, I think in the Android Development section that should have a link to samfirmware.com and may provide you with a ROM version that should work. something that may help: plug your tab into the charger at least overnight. I used the stock charger and cable and charged it for 12 hours or so. I did not get any indication that it was charging since the screen and softkeys would not respond, but it did charge.
Of course, I look back and I think you have an indicator, but still a good idea. Try it anyway. Can't make it worse, eh? Mine seemed hardbricked, but it wasn't. I was real close to taking it apart before I found something that works. I believe, IMO, what really fixed it is flashing ROM (PDA), Modem, and CSC files all at once. It could have been something else, but that was the last thing I did before it finally booted.
Go to samfirmware.com, create a free account, and sign in. Then go here (I think your tab is a P1010, correct?) http://www.samfirmware.com/WEBPROTECT-p1010.htm
and Download this:
1010XWKC1 ## MULTI - CSC - OXXKC1 P1WIFI 2.2.1 2011 March DOWNLOAD
(click on DOWNLOAD)
Unzip that file you just downloaded
Start ODIN
Hold VOL DOWN and plug in tab to computer
I believe 3 files should be in the .rar (you can use 7-zip to open, Google it)
the MODEM file goes in Phone.
the CSC file goes in, you guessed it, CSC
last one is PDA.
I think I just rewrote instructions that can be found in the Galaxy Tab Bible. lol. This is what I would do. It worked for me.
Password for P1000XWJJ7.rar
Gentlemen,
I've downloaded both P1000XWJJ7.rar and P1010XWKC1_OXXKC1 to fix my bricked tab, but both require a password to extract the archives. Does anyone know the password? Has anyone had the same issue? I doubt it, otherwise i think it would have been addressed. Any help is appreciated.
I'm having the same problem were you able to fix it?
jairo_pena said:
Gentlemen,
I've downloaded both P1000XWJJ7.rar and P1010XWKC1_OXXKC1 to fix my bricked tab, but both require a password to extract the archives. Does anyone know the password? Has anyone had the same issue? I doubt it, otherwise i think it would have been addressed. Any help is appreciated.
Click to expand...
Click to collapse
try sampro.pl
see if that works.
I too require the passwords to be able to extract these files if someone would be so kind.
Copied straight from SamFirmware.com. It is right at the top of the download page.
try both of these... seems it could be either one of them
## Password is samfirmware.com
# Password is samsung-firmwares.com
Click to expand...
Click to collapse
where can i get these files for the sprint version of the tab i believe the model is p100 I don't see it listed on the recommended website
oxbeast1210 said:
where can i get these files for the sprint version of the tab i believe the model is p100 I don't see it listed on the recommended website
Click to expand...
Click to collapse
do a quick search of the dev thread for EA24 and you should be able to find the original SPH-P100 files. then you can find the EB28 and EF17 updates as well to get all the way to the official GB release.
tried the suggested file still get the error that the OP got in the first screen
oxbeast1210 said:
tried the suggested file still get the error that the OP got in the first screen
Click to expand...
Click to collapse
ok, no one likes a bricked device so let's see what we can do to help you. tell us where you are with your problem. by that i mean what model do you have, what rom were you running, what did you do or try to do that bricked your phone. i'll keep an eye on this thread looking for your response and we'll go from there.
I have the sprint p100 model room was stock rooted gingerbread.
I mailed the Tab to my brother when he got it tab battery was
completely dead and after he charged it and turned it on
he had that error
---------- Post added at 01:30 AM ---------- Previous post was at 01:29 AM ----------
thank you very much for helping me!!
can anyone help?
I have the T-Mobile version of this, but here's a guide and download files to recover your stock ROM. You can follow the entire guide if you want the Overcome ROM as well:
Guide:
http://www.teamovercome.net/p1000/?page_id=17
Downloads:
http://www.teamovercome.net/p1000/?page_id=21
Good luck!
NOTE:
Sprint modem is not listed, but you can fix that later. If you can get it to work with this guide & using the last modem file, we can go from there.
gtabspring said:
I have tried installing EA24 stock (http://forum.xda-developers.com/showthread.php?t=1133053) but still Freeze when booting. The error message shown on the picture. I am clueless and need your help.
Click to expand...
Click to collapse
try the one on teamovercome . net I have soft bricked mine but it worked after i followed their instructions there..
Has anyone EVER confirmed that overcome work for non GSM tab, for unbricking and CwM functions?
Sent from my GT-P1000 using XDA
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
Hey guys,
In a bit of a pickle at the moment. I grabbed an S1 off a friend to try and teach myself about rooting and flashing custom ROMs and such using Odin. With the final intent getting it to run ICS. Not a very hard challenge, but evidently it is for me.
I'll explain what I did, and if you can help without investing too much of your time I would be very grateful.
When I got it, it was running 2.3.3, all the tutorials I read told me to update it to 2.3.6 before doing anything more. I managed to root the phone easy enough, no issues there. But when I tried to put 2.3.6 on via Mobile Odin, (which I used to flash my S2 to ICS, long story) it had seemed to freeze on 'flashing flash kernel' for a good 15 or so minutes.
Being the daft monkey that I am, I exited the program...by removing the battery (don't judge me please). When I went to turn it on, it wouldn't load past the "Samsung Galaxy S" screen.
It goes into Download mode fine, and I've tried to flash an abundance of different Gingerbread ROMs onto the phone and Odin has just been getting stuck on the "setup connection" every time I've tried to flash.
I have tried using different USB ports which is readily suggested by most people and seems to work, using my laptop instead, different cords as well. No luck. Nothing happens when I press volume UP + home + lock like it used to, so I can't even factory reset or anything =\
I did find somewhere that suggested adding a PIT file to Odin and selecting repartition but every one yells at each other when 'repartition' gets mentioned, lol.
I hope this is in the right place, please bare with me if I used any wrong terminologies, I am relatively new to this.
Has anyone got some suggestions that may help me with my problem? =\
Thank you!
Taylor
sigh...here's my recovery kit, unzip, read .txt file, proceed
http://db.tt/MOGZx01S
Credits to nitr8 and chainfire
Thanks, sorry for being such a hassle...
Twinning92 said:
Thanks, sorry for being such a hassle...
Click to expand...
Click to collapse
No problems, was teasing ya! You will end up with root and custom recovery, if you then go to slim website and read and follow installation instructions you will then have lush ics