Related
Like the title says, this is how to modify your Notification title drawer on the Captivate with Froyo like Tatuyama's theme's drawer(notification slide) for the i9000. This will tell you how to make it transparent and add a graphic or change the colors. This has been tested on Cog B7, dont think it works on i9000 roms like Shep's. I can help you though on this if you absolutely are dieing to do it. It will just take a little fandanglin and searching but can be done. I ripped apart Shep's rom and found all of Tat's mods, I jsut dont remember them off the top of my head..
I have also attached the drop bars from Tat's theme and another black AOSP bar should you want to use it. I have also included a PSD file to modify to your liking, my APK's for the frameworks I edited below (these include the tat icons already inside), a blank black background bar to use should you want, and other goodies for your modding needs. I have also slapped some screenies below to get an idea of wtf I am even talking about. Also if you use my Frameworks be aware that I am using the battery mod version "I" from that one thread, injected Tat's icons and goodies, and other MISC things.
I will try to do this as simple as possible. I dont linger in the themes area so you are pretty much on your own. I am going to write this tutorial based on Windows O/S and Adobe Photoshop. Attempt this at your own risk. If you biff it up its not my fault. I wrote the directions as I did it, and I am working great with awesome sauce dripping from my phone. I cannot be held responsible if you are below par of the preqs listed. I assume if you are going to attempt it you are competent and comfortable with all things required. However, should you somehow mess up, I do provide some SYA (save your ass) directions below. That being said, Good luck and Mod On!
Prerequisites:
1) ADB Dev Kit and experience using it (push, pull, shell)
2) Photoshop or other photo editing software & experience
3) Basic Windows experience: cut/copy/paste/rename/zipping/moving files. (if you use linux you shouldnt worry as you more than likely are a power user already and can cross apply).
Step 1: We need to download the APK's off the phone and get them ready for editing (or yank them out of the ROM package you download).
1) open a CMD (command prompt) window type:
adb pull /system/framework/twframework-res.apk C:\
adb pull /system/framework/framework-res.apk C:\This will save the files to your root of C:. Should you want to do it elsewhere you can specify or else leave it blank and it will stick the files in your developer kit folder.
2) (OPTIONAL BUT RECOMMENDED! STEP) Navigate to where you saved the files, right click and copy/paste to make a set of backups of these files.
3) Rename the .apk to .zip files. You can also associate your .apk to a program like WinRAR or WinZIP instead. This will open APK Files by default or optional secondary(open with). This makes the whole thing a lot easier as you can open the file(APK) and leave it up, make the edits and drop them directly back into the APK. KEEP FILE STRUCTURE PROPER!
4) Extract the APK files to seperate folders or dig out the below files for editing.
Step 2: Editing the proper files.
1) Navigate to twframework.apk's extracted folder from above or these files you extracted.
2) Find and open sub folder /res/
3) Once in /res/ find and open /drawable-hdpi/
4) Once in /drawable-hdpi/ locate the following files:
- status_bar_background.9.png (actual background of the drawer)
- status_bar_header_background.png (this is the 5 icons across the top of drawer)
- status_bar_close_on.png (this is the dropdown bar at the bottom of drawer)
- quick_panel_list_bg_01.9 (seperator between carrier and application info)
5) Open these files in Photoshop(or another editor)
6) Verify these are set to RGB not Index color mode so you can edit them.
7) Edit the layers to make them transparent. If there are not layers, right click and "create layer from background". You can then edit your layer settings. I set mine to 75% transparency in Photoshop, the actual background to 85% to darken it up a little. This will take some tweaking to get it just perfect for you. Make sure you save them in .png format with the same name they started with and not the PSD or "copy". Also you want non interlaced if it prompts you.
8) Do the same steps for the framework-res.apk.
- status_bar_item_app_background_normal.9.png (not sure if this one is necessary)
- status_bar_item_background_normal.9.png (this is teh notifications)
Step 3: Put it together and upload.
After you update the files, you will need to inject them back ito the APK's where you got them (/res/drawable-hdpi/). You can do this by opening the APK with Winzip/WinRAR/7zip and put them in there or if you extracted the entire contents just zip it all back up. You will need to remove the .zip extension if you went that route. Also, make sure you open it after zipping and verify it maintains the correct structure or you will be doing the recovery shuffle after you reboot. If you see only 1 folder in your zip this is WRONG! You need to see assets, RES, META-INF, and 2 other files in there(manifests and resources). If you see all these then you are ready to rock and roll.
After you get them back together upload them to your device using:
adb push <location of apk you edited>\framework-res.apk /sdcard/
adb push <location of apk you edited>\twframework-res.apk /sdcard/
then in teh same command prompt window (or another, whatever)
adb shell
su
cd sdcard
cp twframework-res.apk /system/framework/twframework-res.apk
cp framework-res.apk /system/framework/framework-res.apk
reboot
It shouldnt take but a second to come back up. You are done.
It may take a little bit of editing of the files to get them to look OK. I spent most of my day today getting mine together. You can use them if you like the "hootie edition" or just edit your own.
SEE POST #6 IF SOMETHING GOES HORRIBLY WRONG!!!!!
Screenies:
http://www.wtfokc.com/sef****/snapshot-1.pnghttp://www.wtfokc.com/sef****/snapshot-2.pnghttp://www.wtfokc.com/sef****/snapshot-3.png
That looks fantastic. I want your notification drop down and all minus the owl of course and text, but can this be done by using metamorph instead of having to adb everything?
awsome write up. Looks pretty simple and I will attempt this when I get home today.
This is an absolutely EXCELLENT tutorial. Props to you. I will be doing this shortly to all my Captivates in the house, 3 in use, plus the 4th one I'm using as a Dev phone.
Hi,
I've followed your instructions. After the files have been pushed up, my phone goes through the usual errors due to the framework change. The problem I'm having is that after I restart my phone, the phone gets past the galaxy s screen, but then it goes black and does not respond. Any suggestions?
smeltn said:
That looks fantastic. I want your notification drop down and all minus the owl of course and text, but can this be done by using metamorph instead of having to adb everything?
Click to expand...
Click to collapse
To be honest I have never used metamorph on the Captivate. On my G1 yes you could acheive that. I googled the metamorph tutorial Junkdruggler did and it looks rather lengthy and involved editing XML files. You can find that info here. Also, the files you would need to do my way with just a blank one are above. Just download the closebars zip and the "blank" zip. Then mod/inject your APK - or hell mine from above- and push it to your device. This is a rather quick ordeal.
thehavock18 said:
awsome write up. Looks pretty simple and I will attempt this when I get home today.
Click to expand...
Click to collapse
miztaken1312 said:
This is an absolutely EXCELLENT tutorial. Props to you. I will be doing this shortly to all my Captivates in the house, 3 in use, plus the 4th one I'm using as a Dev phone.
Click to expand...
Click to collapse
Thanks guys, took me a little while to figure it all out and a lot of framework pushing to get it just right Let me know how it turns out for you! Hell post some screenshots when you are done. I want to see them
gangpe said:
Hi,
I've followed your instructions. After the files have been pushed up, my phone goes through the usual errors due to the framework change. The problem I'm having is that after I restart my phone, the phone gets past the galaxy s screen, but then it goes black and does not respond. Any suggestions?
Click to expand...
Click to collapse
THIS IS HOW TO SAVE YOURSELF
Well, not sure what you mean "usual errors" with framework change? I havent ever had any issues with the framework replacements. I occasionally have then crash if I replace them while phone is on and not in recovery. A reboot fixes this though. Are you using a Cap rom or an I9000? This doesnt work on I9000 roms as thier APK's are slightly different- teh HDPI folder has a v4 at the end (IIRC). I can help you through this though if that's the case..
If it truly is a cap rom, I did experience a similar problem on my phone one time when I pushed the framework.apk. What had happened is I right-clicked the ROOT directory I had placed all the files in and said to zip it. This caused the folder to be INSIDE the zip. So the file structure went like this:
>>ZIP FILE I CREATED>>
--------->>FOLDER ALL FILES WERE IN>>
------------------>>FILE STRUCTURE OF THE ORIGINAL APK>>
Which should have been
>>ZIP FILE I CREATED>>
--------->>FILE STRUCTURE OF ORIGINAL APK>>
To better explain it- If you open the zip you created, do you see the RES folder, META-INF folder, assets folder, and then there will be 2 other files? Or do you see 1 single folder? If you see 1 single folder you zipped it up incorrectly. You will need to go into the folder and select all-> right click-> zip (send to-> compressed folder). This should fix it. If this isnt the case something else went horribly wrong. To fix it we will need to restore the original files you hopefully backed up. If you didnt back up you still arent totally hosed- just redownload the ROM you are running, open it up and navigate to the /system/framework folder and pull out the original frameworks. Then follow these instructions to get them back on the device.
Step 1:
A quick way to get out of this situation is to take the copies rename them back to twframework-res.apk and framework-res.apk (or pull from the original rom package as mentioned above).
Hopefully you have the 2e recovery kernel, as you need it to get back to where you started. If you cant do clockwork, well you may as well odin cause you are a few flashes behind anyway.
K, so first you will need to download the update.zip I have included with this post. This is the clockwork recovery file. You will next need to put your phone in reocvery mode. to do this do:
adb reboot recovery
Step 2:
Next you will need push that file you downloaded to your SD. to do that you need to:
adb push <location of downloaded>\update.zip /sdcard/
Now, once in recovery- tell it to reinstall packages. This may reboot the phone. If it does, tell it to reinstall packages again. This should get you to clockwork recovery.
Step 3:
once you have a green clockwork recovery screen, you will get the chance to SU via ADB SHELL. You can then repeat the pushing of your ORIGINAL fles back to your phone and retry the process.
You could also pull the files you pushed to see what went wrong- but do that first as if you push before they will be overwritten with the original files.
Looking into doing a little custom work but before I do. Like Tat's theme do you need to edit XML files for specific things like the pop ups being black. Or do I just get the naming right and put the proper PNG in the apk.
thehavock18 said:
Looking into doing a little custom work but before I do. Like Tat's theme do you need to edit XML files for specific things like the pop ups being black. Or do I just get the naming right and put the proper PNG in the apk.
Click to expand...
Click to collapse
This is only for the notification drawer and not the actual pop ups. If you want to edit the popups you will need to edit the XML files.
Thanks for the quick response. I might have to dive into all the XML edits.
thehavock18 said:
Thanks for the quick response. I might have to dive into all the XML edits.
Click to expand...
Click to collapse
If you do post a how to thread cause I would like to know how myself
status_bar_background.9.png (actual background of the drawer)
If I ONLY wanted to make the pull-down menu background transparent the above file would be the only one that I need to mod... correct??
jslee1020 said:
status_bar_background.9.png (actual background of the drawer)
If I ONLY wanted to make the pull-down menu background transparent the above file would be the only one that I need to mod... correct??
Click to expand...
Click to collapse
That is correct.
The one problem though is the AT&T (carrier part) at the top is also transparent and you quickly notice it looks a little strange with your items not transparent. I tried to live with it for a little bit but ended up modding the rest too.
malfuncion said:
That is correct.
The one problem though is the AT&T (carrier part) at the top is also transparent and you quickly notice it looks a little strange with your items not transparent. I tried to live with it for a little bit but ended up modding the rest too.
Click to expand...
Click to collapse
quick_panel_list_bg_01.9 (seperator between carrier and application info)
is this the file for the AT&T carrier part??
The quick panel is actually the part that says "Notifications" or "On Going" below the AT&T part. THe AT&T and clear button is part of the actual background peice. So what happens is the AT&T part becomes transparent, while the notification peices are solid. It may not bother you but it bugged the crap out of me. It's personal preference really..
malfuncion said:
The quick panel is actually the part that says "Notifications" or "On Going" below the AT&T part. THe AT&T and clear button is part of the actual background peice. So what happens is the AT&T part becomes transparent, while the notification peices are solid. It may not bother you but it bugged the crap out of me. It's personal preference really..
Click to expand...
Click to collapse
I get it. Well I'll try it out and see... I guess no better way to learn then to experience it first hand Thanks!
I was able to take the Cog Beta 7 framwork and Tat's framwork. I pulled out all the changes from his theme and put them in cog beta 7. I actually did not have to edit any files and was able to apply it.
I had to change a few file names around so all the backgrounds / pop ups applied to the theme. I left DG's background.
I don't want to post it since it is not my own work but if you want to take a look at the framwork and twframwork I can send them PM.
notification bar??
What file is the actual notification bar with the battery/clock/etc... would it be inside twframework-res.apk or framework-res.apk?
EDIT: Just set background transparency to 80% in photoshop and changed the color to black. The transparency seems ok, but it resembles minimalistic theme too much... gonna fiddle with it some more today.
jslee1020 said:
What file is the actual notification bar with the battery/clock/etc... would it be inside twframework-res.apk or framework-res.apk?
Click to expand...
Click to collapse
it is in the framework.apk. The notification bar's file is:
statusbar_background.9.png
This is confirmed. I j ust set mine to a gradient and it actually looks kind of good.
screenie:
http://wtfokc.com/sef****/snapshot-4.png
Hey Malfunction,
Finally got it working past the galaxy S screen, thanks for the info. One last question, then I should be out of your hair. Where can I change the settings for the media scanning icons? Currently, the white default icons are showing, but I'm trying to change that to the black SD card. I'm going to look into it myself too; figured I'd ask though.
Thanks,
gangpe said:
Hey Malfunction,
Finally got it working past the galaxy S screen, thanks for the info. One last question, then I should be out of your hair. Where can I change the settings for the media scanning icons? Currently, the white default icons are showing, but I'm trying to change that to the black SD card. I'm going to look into it myself too; figured I'd ask though.
Thanks,
Click to expand...
Click to collapse
Good deal, glad you got it working. What was the problem?
As for the SDCard- depends which you need. In framework-res there are these 3:
stat_notify_sdcard.png
stat_notify_sdcard_prepare.png
stat_notify_sdcard_usb.png
I had to do some hunting to find out which program was the running process for the Media Scanner. It is "MediaProvider.apk" on your /system/app folder. I edited mine and it now works and has all the Tat icons loaded. Thanks for that heads up I hadnt noticed that little piece before you mentioned it.
I looked at Tat's ROM section and also saw that he has edited these, may consider if you are wanting to mimick his:
DownloadProvider (Market)
MediaProvider (Media Scanner)
Vending (Market)
PackageProvider.apk (Uninstallation Screen)
GoogleQuickSearchBox.apk (Google Search)
To get started, read the posts below by tsachi.
Then give this a glance - Do it yourself guide for theme editing
More Resources:
http://forum.xda-developers.com/showthread.php?t=982300
https://docs.google.com/Doc?docid=0AcdxIJRSH9ypZGZzc2pxNDlfMjdnazk4OHNxZA&hl=en
http://forum.xda-developers.com/showthread.php?t=916814
Info on how to edit the items in notification bar:
+ http://forum.xda-developers.com/showpost.php?p=11158662&postcount=3
All credit belongs to the original authors. I am simply gathering all this information to make it easier.
For any help or support, post in this thread and we will try to help you the best we can.
Expanded Information
Introduction
The link in OP gives you instructions on how to replace images, but it lacks information for the inexperienced themer. Here is some background information and some more details on the steps before and after you insert new images in your framework.
System Icons and background images sit in two main files: framework-res.apk and twframework-res.apk. Within these files there is a res directory, and under that you have the folders containing data. Google has guidelines on icon design, although themers usually ignore those in order to get a different from stock look. One thing you would notice is that there are a lot of repeated icons. For example, framework-res.apk has both drawable-hdpi and drawable-hdpi-v4. The first is there for compatibility with older APIs (anroid 1.6 or older) so I am not sure why it is still there, but if you remove it your phone will not like it.
Each application has its own res folder where the launcher icon and other visuals are kept. There are, however, a lot of applications that reference the framework.apk for visuals. An example is the dialer that calls on some background images from both framework-res and twframework-res.
There are 2 types of images that you would encounter. Normal icons and images are non-scalable. They take a certain amount of real estate on the phone, and that’s it. Example of these are the battery levels and notification icons. The other type is the .9 images. These are images that are going to be stretched to fit whatever space is needed. An example of that are the menu backgrounds. The .9 images have a special format. The one pixel border around them defines how they stretch and how content is displayed in them. It is highly recommended to follow the standards in order to get repeatable and consistent look. Android SDK has a tool to help with .9 file design: draw9patch.bat.
Important note: The .9 files show the borders ONLY when de-compiled. If you grab a file from the framework directly you will not see that line. It is therefore required to compile the .9 files after you make them. You can use apk manager or ThemePro-JAVA to recompile the framework apk after modifying the files.
Definitions for which image is used where sit in the xml files under the drawable folder. These are compiled xml files, you can’t edit them with a text editor. For this introduction I will not go into modifying xml files. Each apk also has a resources file that describes what is in there. If you add, remove, or rename files in the apk you will have discrepancy with the resource file and the theme will not work (more likely you will be stuck in an infinite bootup loop)
Before you start:
Warning: frameworks are highly linked with other files. You can’t just take a framework from one ROM and put it in another. Always keep a backup of the original files ready to be installed (see below), otherwise you may need to re-flash the ROM. Frameworks are also sensitive to compression. DO NOT use winzip to handle the files, it can cause problems with the final apk file.
There are several things you would need before you start
A rooted phone
SDK installed on the computer
A zip handling software other than winzip (winRAR and 7-zip are both good options)
Auto-sign (http://forum.xda-developers.com/showthread.php?t=471634) or signing tool (http://forum.xda-developers.com/showthread.php?t=473580)
Create a backup
Grab the framewor
k-res.apk and twframework-res.apk from your phone. They are located in the system/framework folder. You would need them as a starting point for your modification and you need them for a backup
Create a clockwork installation file of the original files (see post below)
Name the installation framework-original.zip, or something else that would be easily recognized in
case of trouble, and then copy it to your internal sd card.
After you are done modifying files
Create an installation file (see post below)
Give the file a name that is easy to recognize and copy it to your internal sd card
Reboot into recovery
Select install zip from card -> choose zip from sdcard
Select the installation of the new framework and confirm the installation
Reboot
If you are stuck in an infinite boot-up cycle
Take the battery out
Using 3-key combination boot into recovery (up-down volume + power. Hold until the AT&T screen cycles back, then release)
Install your original framework backup and reboot
Creating clockwork installation
After you have finished modifying the files, the best way to get them to the phone is through clockwork installation. Make sure that you have the original update.zip file on the sdcard. If you have a rooted phone, you probably have that already, but if not you can install ROM manager from the market and run it to get the update in place.
To create the installation file follow these steps:
Create a folder \framework
Place your modified framework files in that folder
Back in the main folder, create the following folder tree: \META-INF\com\google\android
In the android folder create a text file named update-script
WARNING: Do not name your framework file "update.zip"! You need both the original update.zip and the framework one for the installation.
Note: Although copying of the framework files may be possible, it is highly risky. In my experience installation from clockwork is the easiest
Puzzle Lock Screen Mod
Here is information for people who want to modify the look of the puzzle lock screen. It is only the list of images to replace, not the coding to change functionality.
The files sit in framework-res.apk under res\drawable-hdpi. The files are zzz_unlock_puzzle...
puzzle pieces
zzz_unlock_puzzle_noti_icon_call.png : Missed call piece in the floating state
zzz_unlock_puzzle_noti_icon_call_fit.png : Missed call when it gets to the unlock spot
zzz_unlock_puzzle_noti_icon_unlock.png : General unlock floating
zzz_unlock_puzzle_noti_icon_unlock_fit.png : General unlock at the unlock spot
Same for messages and voicemail.
Background
zzz_unlock_puzzle_bg.png : The image that shows on the lock screen. This should be semi-transparent if you want to show the regular screen background
zzz_unlock_puzzle_bg_pressed.png : Image that shows while dragging the puzzle pieces. Usually a slight modification of the regular background
zzz_unlock_puzzle_bg_land.png : The landscape version
Music player
zzz_unlock_disk... and zzz_unlock_ctr_pr... are the files related to the player.
zzz_unlock_ctr_bg.9.png is the background for the music controls
Text background
Overlaying the unlock image is text. That text can have background that is more opaque than the rest of the unlock screen.
The attached image shows the three regions. These regions also apply to the glass unlock.
Note: These are .9 files and should be done right to ensure correct stretching and text boundries.
Other files
There are some extra background files in the frameworks but I haven't been able to find where they go. There are also some files to control the clock numbers zzz_unlock_clock_...
Working with APK manager
What is APK manager?
APK manager is a tool for decompiling / recompiling apk files. If you want to change anything other than images, it is a must have.
The basics
The basic flow when using APK manager is
Place apk file in place-apk-here-for-modding folder
run the Script.bat file
Type 22 and select the file you want to work with
Type 9 and wait for it to finish decompiling
Modify the items you want modified (they will be in the projects folder)
type 11 to recompile
Sounds easy? It is, and it isn't. There are several places where things can go wrong. Here are a few of the things to watch for:
Bad starting file
This is mostly true for framework files that went through several cycles of modifications. The framework is forgiving to having extra items, or having bad .9 images (see post above about .9 images). Some people may have replaced images without recompiling the framework in a way that breaks internal links. If this happens you will very likely see error messages during the decompile stage. If that happens check the log file and correct things. One of the most common errors is .9 files replaced with regular images. See this post for how to solve this.
Things may not always be "fixable", so the best approach is to get the original framework that is the base for the one you need. Having a clean start can save a lot of headaches later on.
Overwriting your changes
When you recompile, assuming everything worked ok, you are prompted if this is a system file. Most likely you want to say yes. This ensures that the original signature is copied over. You will also be prompted if you want to copy some files over from the original. BE CAREFUL!. There are people who say you reduce the risk of errors if you copy things that didn't change. Personally, if I changed anything that required recompilation (mostly added new images or modified xml files) I always choose not to copy extra files. If you do choose to copy some files over, pay attention to the next step. Do not hit any key until you remove the modified files. You will need to go to the newly created "keep" folder (in the top apk manager directory) and remove any image that you changed and any xml that you modified. Also, if you modified xml files to add new images you need to delete "resources.arsc".
Failed rebuild
APK manager is trying to minimize work by only compiling newly changed items. If you built an apk and realized you have an error, or want to add more changes, I recommend removing the cached build. Go to the projects folder and delete the "build" folder. I've had cases where the new items didn't catch.
Removed items
I highly recommend to leave icons that you do not need. I've had occasions where I removed things that I thought had no more reference, but then ended with endless boot-loops. For example, if you modify the xml to only show 6 out of the 101 battery charge animations, leave the remaining icons in your project.
If you're stuck
Look at the log file. That would usually give you an answer. Also, if you are working on a recent GB ROM you probably need to get the beta 5 version. Version 4.9 will have problems compiling the newer files.
Thanks for the info!!! I have been wanting to play with themes for a while. Now I gots the knowledge.
sent from my Cap using the app.
Thanks for this post...I'll be looking into this for sure.
tsachi said:
After you have finished modifying the files, the best way to get them to the phone is through clockwork installation. Make sure that you have the original update.zip file on the sdcard. If you have a rooted phone, you probably have that already, but if not you can install ROM manager from the market and run it to get the update in place.
To create the installation file follow these steps:
Create a folder \framework
Place your modified framework files in that folder
Back in the main folder, create the following folder tree: \META-INF\com\google\android
In the android folder create a text file named update-script
WARNING: Do not name your framework file "update.zip"! You need both the original update.zip and the framework one for the installation.
Note: Although copying of the framework files may be possible, it is highly risky. In my experience installation from clockwork is the easiest
Click to expand...
Click to collapse
Thanks for this.. Question In #4 above the text file in the android folder. Is that an empty file? no extension? Thanks for your help.
TorqueWrench001 said:
Thanks for this.. Question In #4 above the text file in the android folder. Is that an empty file? no extension? Thanks for your help.
Click to expand...
Click to collapse
The file has no extension but it isn't empty. It contains the installation instructions. Typical instructions would be:
copy_dir PACKAGE:framework SYSTEM:framework
which copies everything in the frameworks folder in the zip file to the system/framework folder on the phone
Sent from a captivate running phoenix using XDA app
https://docs.google.com/Doc?docid=0AcdxIJRSH9ypZGZzc2pxNDlfMjdnazk4OHNxZA&hl=en
http://forum.xda-developers.com/showthread.php?t=916814
Good info
Thanks, been wanting to play with themes for a while now!!!!!
This needs a bump for all those requesting themes to be made.
This needs to be a sticky. I detailed guide is just what was needed. I been wanting to play around with themes but always end up doing something stupid so it never works. Now I have some more knowledge and hopefully can avoid that mistake.
Thank you, one of the links has the info I need to fix my text color issue in my notification/menu window!
Sent from a phone using an app.
Why it's not pinned it's beyond me. We have a thread pinned for must have apps that aren't even must have apps, but not this.
That was do to some how me missing this thread for the post few months. It is corrected now. Stuck
Since the thread is getting more life, I just added info on lock screen (fourth post)
Sent from my captivate running the latest firefly
Resorce dump
Well now that this is not going to fall to the depths of page 500, ill unload some rubbish into it.
http://android.modaco.com/content/zte-blade-themes-and-design-customisation/328510/guide-theme-editing-and-related-things/
http://forum.xda-developers.com/showpost.php?p=9066440&postcount=1
http://forum.xda-developers.com/showthread.php?t=593932
http://forum.xda-developers.com/showthread.php?t=695701
http://forum.xda-developers.com/showpost.php?p=8105110&postcount=2
http://developerlife.com/tutorials/?p=309
http://www.droidforums.net/forum/team-inversion-conversion/116419-so-you-want-edit-xmls-more-adb-apk-manager-how-basics.html
http://www.colorschemer.com/online.html
http://www.colorsontheweb.com/colorwizard.asp
Edit: I purposefully did not include descriptions in the links. If you dont know what your doing reading all but the last two links in there entirety will help get you on your way.
whiteguypl said:
Well now that this is not going to fall to the depths of page 500, ill unload some rubbish into it.
http://android.modaco.com/content/zte-blade-themes-and-design-customisation/328510/guide-theme-editing-and-related-things/
http://forum.xda-developers.com/showpost.php?p=9066440&postcount=1
http://forum.xda-developers.com/showthread.php?t=593932
http://forum.xda-developers.com/showthread.php?t=695701
http://forum.xda-developers.com/showpost.php?p=8105110&postcount=2
http://developerlife.com/tutorials/?p=309
http://www.droidforums.net/forum/team-inversion-conversion/116419-so-you-want-edit-xmls-more-adb-apk-manager-how-basics.html
http://www.colorschemer.com/online.html
http://www.colorsontheweb.com/colorwizard.asp
Edit: I purposefully did not include descriptions in the links. If you dont know what your doing reading all but the last two links in there entirety will help get you on your way.
Click to expand...
Click to collapse
Very nice, I will add these to OP with details about each link.
I'm quite happy that this has been pinned finally. Now to get to work. I haven't decided on which ROM I want to do, or even if I wanna port another theme or make my own. SO MANY CHOICES!!
.
Hi there ppl, here I post you a link to a lil modified version of the original honeycomb rip boot animation that will work in our Arias fullscreen. Is just the dimensions changed in the desc.txt file but it'll save you sometime (as I had to go all the way to get how boot animation worked q: )
Here how it looks on a Nexus S: http://www.youtube.com/watch?v=MrAoqgAzKyQ
If you're running CM7 it should be as simply as replacing the bootanimation.zip located in /data/local/ with this one (use root explorer or ES file explorer with root explorer option to navigate there). If you're running another ROM (and you dont have a bootanimation at /data/local/) take the second version and flash it in recovery. Not sure if that would work (havent tried) but it'll replace the animation found at /system/media/ folder as our Arias are s-on still.
Bare Version (just drop it in /data/local/)
Recovery Flasheable Version (replaces bootanimation found at /system/media/)
Neither way works breh
Edit: CM 7rc
Sent from my Liberty using XDA App
.
There's really no science to have it, you just need to replace the bootanimation.zip in /data/local/ (that folder is hidden, you need root explorer to get in there, is in the phone memory, not the sdcard)
Darius_bd said:
.
There's really no science to have it, you just need to replace the bootanimation.zip in /data/local/ (that folder is hidden, you need root explorer to get in there, is in the phone memory, not the sdcard)
Click to expand...
Click to collapse
The original is in /system/media. Putting a bootanimation.zip in /data/local will supercede the original. It looks great on the aria. Thanks for the port.
It should work on any rooted phone, CM or not.
Also, there's no need to use root explorer. Just place bootanimation.zip on your sdcard root and open Terminal Emulator:
su
cp /sdcard/bootanimation.zip /data/local/
reboot
Click to expand...
Click to collapse
Works like a charm.
Some of the versions floating around have white flashes between the loops - this one fixes that:
http://lts.cr/QHX
bkmo said:
The original is in /system/media. Putting a bootanimation.zip in /data/local will supercede the original. It looks great on the aria. Thanks for the port.
Click to expand...
Click to collapse
Thank you, that was very helpful. But it is a sick boot animation.
Sent from my Liberty using XDA App
Perhaps I did it wrong, but the image appears rather pixelated to me during load up.
Awesome. Cheers!
seboj said:
Some of the versions floating around have white flashes between the loops - this one fixes that:
Click to expand...
Click to collapse
The white flashes happens when there are foreign files inside the folder with the PNGs. In most case, a certain thumb.db hidden file I think we all have meet before
powerchess said:
Perhaps I did it wrong, but the image appears rather pixelated to me during load up.
Click to expand...
Click to collapse
You can try cooking your framework and add the HC boot animation @ the UOT Kitchen
merged 10chrs
Looks awesome Darius, thanks for sharing.
I am drooling right now that's the most epic thing I have sawn lol
Sent from my Liberty using XDA App
Thanks this is awesome. Took me a while to install it. Running liberated 2.2 based on the gratia release and none of the above methods worked. Finally replaced the boot file in system/customize/resource with this one and flashed the whole Rom thru recovery no wipes. Worked perfectly.
Sent from my HTC Liberty using XDA Premium App
Wow, it looks great and the install was a piece of cake. I don't really spend much time watching the phone boot, but it's cool anyway.
awesome boot animation, but i'm curious about changing the boot image like the one in the video to like a picture in my gallery?
thanks for this!! worked like a charm.
can't get it working, running FR008.
HTC White-screen
I used Root Explorer to drop the file into the right folder, and when I rebooted the phone (multiple times), it got stuck at the HTC Screen.
Not worth the hassle...at least for something that lasts less than a minute.
Did it wow for a complete noob, if no one doesn't know how to do this shouldn't be rooted at all lol.
1. Get root explorer
2. Download his bare version and put it right on ur sd card so u can find it
3. Then go to phone on root explorer go out of where it first takes u via back button
4. Copy the bootanimation.zip
5. Then it'll have a option to paste hit back button it will take u back to where u were
6. Go to data/local/ and hit paste
7. Reboot and watch the awesome boot!
-AriaUSer_
AriaUSer_ said:
Did it wow for a complete noob, if no one doesn't know how to do this shouldn't be rooted at all lol.
1. Get root explorer
2. Download his bare version and put it right on ur sd card so u can find it
3. Then go to phone on root explorer go out of where it first takes u via back button
4. Copy the bootanimation.zip
5. Then it'll have a option to paste hit back button it will take u back to where u were
6. Go to data/local/ and hit paste
7. Reboot and watch the awesome boot!
-AriaUSer_
Click to expand...
Click to collapse
Better yet:
Copy the bootanimation.zip file to the ROM zip file (system/media folder) and THEN copy the ROM file to your device using your choice of file exchange.
The first thing I do with new ROMs is to delete the files I don't want or need (like the language files) and add those I want to have (e.g., the original CM7 email app that supports color-coding accounts).
You can also replace the ROMs bootanimation the same way.
I've significantly reduced the size of the ROM by getting rid of unnecessary ring tones (who needs 50 of them?), programs (e.g., ROM Manager), and wallpapers (e.g., smoke, other useless ones).
I can shave typically 5-7 MB off the size, which may not seem like a lot, but helps.
I was wondering if there were any themers out there that have or can make a red theme for fasty 2.5. I would be very greatful. Ive been trying the past couple weeks but im not doing very good. Alot of boot loops.
PS Fasty 2.5 if a kf1 based rom. If that helps at all.
What you trying to do, I know how to code but I'm new to Java and dalvik code. Learning as I go, but maybe I can help you out.
I don't know what all you've been trying, but what I've had success (to a limited degree) with is to pull a current copy of your framework-res.apk, twframework-res.apk, and systemui.apk files out of /system/framework and /system/app (you may need to dig to find them), then open/unzip the folder with 7zip. Make copies of each apk to a safe place as a backup.
Dig around in each folder and change anything without a .9.png extension. An easy thing to do is just to use photoshop and automate a color shift. (You may have to play around with some icons - they don't like being opened if they're indexed color.)
Once you have some files ready, open the pulled .apk's with 7zip again (use the open archive option), and overwrite the files inside of them with the files you edited.
Once that's done, fire up adb again and push your updated files back to the respective folders they came from.
Reboot, and you should be good to go.
I would like to make a red version of the theme honeysmoke by the creators of fasty. I would post the link to it but the website is down.
First thing is your going to need something like Apkmanager if you don't already have it.
http://forum.xda-developers.com/showthread.php?t=1227179
Like jmtheiss said, pull the system files out and unzip them. I use Paint.net, which isn't photoshop, but works well.
OK i have apk manager i decompiled the framework-res.apk
voldomart13 said:
OK i have apk manager i decompiled the framework-res.apk
Click to expand...
Click to collapse
Well if your just starting out you should select to extract it first and then look in res/drawable-hdpi and you will see some .png files. Just look at your phone and figure out what you want to try to mod that you see in the folder. The same would hold true for systemui and twframework-res, both will have .png files in the res/drawable-hdpi folder. Be careful not to modify .9.png files, they are a special file that is stretchable and most paint programs don't recognize them and are difficult to modify with draw9patch editor.
http://forum.xda-developers.com/showthread.php?t=908270
Eclipse RFI Boot Animation
Put this together as an alternative for the Eclipse ROM...
Thanks goes to nitroglycerin33 for the sweet ROM and the custom font
YOUTUBE Video:
Eclipse RFI Boot Animation by dubsx
AS ALWAYS...
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE AS A RESULT OF USING THIS CONTENT, JUST AS IT IS NO ONE ELSES FAULT FOR ANY DAMAGE I MIGHT DO TO MINE. IF YOU DO NOT KNOW THE RISKS INVOLVED, YA MIGHT JUST BE BETTER OFF STICKING WITH STOCK. It's not that complicated, just do a little research. Plenty of knowledge floating around XDA...
Simple enough:
1:: download the .zip
2:: rename it (using ES File Explorer or Astro or any ROOT EXPLORER that will allow you to MOUNT SYSTEM AS WRITABLE) by simply cutting out the description so that it is just bootanimation.zip
3:: copy or cut the bootanimation.zip and paste it in the system/media folder
4:: you will be warned that the merge will overwrite the existing file and that the world will end (not really, just accept the merge)
REBOOT
CAUTION: DO NOT LOOK DIRECTLY AT THE ECLIPSE WITHOUT PROPER EYEWEAR
Eclipse RFI Boot Animation [9.15MB]:
CLICK TO DOWNLOAD
...don't be afraid to use the "THANKS" button...
NOTE: The file below is the same animation in JPEG format, for anyone who wants a smaller file or has issues with the larger PNG version above.
Looks good
REVISED and OPTIMIZED version posted
the attached .zip is in JPEG format. PNG version is the "CLICK TO DOWNLOAD" link
how to install this bootanimation on 4 step i was accept the merge but it writes that files cant copied and then a give to my es explorer root and writable mode then copy the file accept the merge and then it writes that file can't copy and bootanimation.zip that lay into media folder go away i don't know what happened with he after reboot my old bootanimation come again how install this bootanmitaion?
Imagine it works on V2