Just wonder if this has happened to everyone. Got an "software update" then it says its updated to "NT 7000 XXKKA"?
Sent from my GT-N7000 using XDA App
Yup everybody gets an update . . That is Gingerbread 2.3.6 for SGN..
Marky143 said:
Yup everybody gets an update . . That is Gingerbread 2.3.6 for SGN..
Click to expand...
Click to collapse
not everybody. i still dont have the update on my unbranded polish ver galaxy note bought from HANDTEC. :-(
tanjeraldyne said:
not everybody. i still dont have the update on my unbranded polish ver galaxy note bought from HANDTEC. :-(
Click to expand...
Click to collapse
Me neither! I too got the Handtecski version
If you got the Handtec edition you have to change your CSC to XEU (for UK) from KOR for Kies / OTA to recognise your device as being eligible for updates.
You can do this (WARNING: This will factory reset your phone) by going into the dialer and typing:
*#272*IMEI#
(where IMEI is your phones IMEI as found in Settings > Status)
This should give you a menu of CSC to choose from. XEU is UK which is eligible for the Kies update right now, others will probably follow soon if they havent already. If you leave it at KOR it will never update as KOR is the no-mans land of CSC.
When is the KOR one going to have an update? Is it safe to just wait for the official one without changing anything? Asking on behalf of a friend who is peranoid which i understand cause we paid 700 for these damn things. Mine came from Germany so i have the update, he is still waiting for his.
Related
since kies does not allow my to get it by default I was wondering how can I get it without bricking my phone.
I bought this on orange, strangely enough it was unlocked.
it says baseband version I9000XXJM1
at the moment its running Eclair, how can I get it to run 2.2?
regards
sadly no reply so far. it might be the way I phrase the question
basically I want to get official English galaxy S on my UK mobile.
I dont know if its possible, or how
Yes it is possible to do and really quite simple.
I also have the Galaxy S on Orange UK and so does my wife also with basband I9000XXJM1
I have succesfully managed to get the official 2.2 onto not only my own and my wifes phone but also my friends LOCKED tmobile.
Every time it went through smoothly without a hitch.
Go to this link and follow the instructions EXACTLY.
It is a very good guide and makes the process very simple.
Let me know if it all goes through ok.
IMPORTANT!!! when the phone reboots it will stick at the glowing S for a good few minutes. DO NOT think your phone has crashed and turn off or take out the battery. Just be patient and it will reboot to a nice new froyo enabled phone.
Each time i have done it all apps and data have remained intact.
Enjoy.
Any more questions dont be afraid to ask
thanks zolah for your help.
this is sorted now.
Was yours directly bought from orange? Because mine was locked and branded with Orange jm1 firmware on it.
Sent from my GT-I9000 using XDA App
dk206 said:
Was yours directly bought from orange? Because mine was locked and branded with Orange jm1 firmware on it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I got mine from phones 4 u on orange contract unlocked.
zolah said:
I got mine from phones 4 u on orange contract unlocked.
Click to expand...
Click to collapse
if you press *#1234# what does it come up with?
PDA
PHONE
CSC
everything
also does that mean you don't have a orange logo on the back of your phone?
mine was bought on orange from e2save or some other website. but not direct.
Help with Getting froyo
hi guys my first post here i was trying to get froyo for my phone Galaxy s i9000 . i bought this phone in china my 2.1 is really slow and there are somethings which are missing like livewallpapers market i hope if you guys can tell me if i can update to froyo or not kies i tried but failed and i have no idea what is the XX from which county but here it is ( sorry for my english not my mother language hope u guys dont mind )
PDA : i9000-2Ao75
Phone : i9000XXJM1
CSC : i9000oXAJM1
thanks in advance
vampire30003 said:
hi guys my first post here i was trying to get froyo for my phone Galaxy s i9000 . i bought this phone in china my 2.1 is really slow and there are somethings which are missing like livewallpapers market i hope if you guys can tell me if i can update to froyo or not kies i tried but failed and i have no idea what is the XX from which county but here it is ( sorry for my english not my mother language hope u guys dont mind )
PDA : i9000-2Ao75
Phone : i9000XXJM1
CSC : i9000oXAJM1
thanks in advance
Click to expand...
Click to collapse
IS the phone genuine Samsung build ??
jje
I'm in the UK an some thing has just happened with Kies normally it shows me my current firmware in black, and underneath the latest firmware in weak orange. Having left the phone connected to kies running in the background, I brought it up full screen and the phone had disconnected. I've reconnected and now the line for the latest firmware doesn't show, an I'm thinking in a short while (maybe) when it comes back its going to be gingerB. So keep checking I think were right on the brink.
edit; 02.38pm Latest firmware line is now showing again and its still jpy.
Why don't you just flash the latest JVH with JVK CSC (XEU) and be done with it? No need to wait.
Mine still shows current JPY. Latest JPY.
It will most likely be released on Monday.
Got to laugh, just spent ages typing a reply an it timed out an I lost the lot. But my phones not had any problems so far I've just been fortunate. I'ts came unbranded an unlocked an its not been modded yet. I'ts gone from JF3 to JM1 to JPY without a hitch and its even kept my original Skype (on 3.) app (ends in 14.) and i've not upgraded to Skype 15 or 16 to upset the apple cart. Apart from some more battery life that we all desire, the phones pretty good. But I admire what you guys have done with all the mods. Flashings outa my league unless I'm forced to, an what bit I know about this phone you've shown me, but I'f it all goes wrong and my good fortune ends with the GB update then, theres no company I'd rather be in than the guys at xda.
samsungwarrior said:
Got to laugh, just spent ages typing a reply an it timed out an I lost the lot.
Click to expand...
Click to collapse
There is a firefox extension called lazarus that stops that happening for good, it's awesome.
Tycc said:
It will most likely be released on Monday.
Click to expand...
Click to collapse
Sadly not. :-(
i lost track on the lates gb firmware, wasnt it released and called back? and is this xeu update the official new gb? and if, where has gb been released already?
Gingerbread was released and swiftly recalled a month ago. Now it has started rolling out again, with Sweden and the Netherlands getting it first.
thanks, hope this is not too off topic, what was the reason for the recall?
Thanks mate.
amwebby said:
Gingerbread was released and swiftly recalled a month ago. Now it has started rolling out again, with Sweden and the Netherlands getting it first.
Click to expand...
Click to collapse
No, we don't have it yet in the Netherlands (XEN) only XEE and NEE, which Sweden and Finland
cgo372 said:
No, we don't have it yet in the Netherlands (XEN) only XEE and NEE, which Sweden and Finland
Click to expand...
Click to collapse
Oops, my bad.
Tycc said:
It will most likely be released on Monday.
Click to expand...
Click to collapse
Guess it wasn't realesed yet.
Sent from my GT-I9000 using XDA App
Which CSC file works with JVH to give us an XEU JVH please?
Try the XEU CSC that came with the JVK firmware.
Are CSC's compatible with different firmwares?
It should be. On 2.2.1 I always used the same CSC when switching ROMs.
Just don't use a 2.1 CSC on 2.2.1 firmwares, or a 2.2.1 CSC on a Gingerbread firmware.
In your case, the XEU CSC was meant for the 2.3.3 JVK, so I don't see why it wouldn't work on the latest JVH. And even if it doesn't, it won't break anything. Just flash another ROM.
Actually even the previous XEU fron jpy works. They are pretty much the same except for the csc version. So yeah just flash the jvk csc and its done.
Sent from my GT-I9000 using XDA Premium App
At present im running the JVK XEU csc on JVB.... Intend to flash JVH pda and phone this evening though....
Sent from my JVB SGS using XDA App
Hi everyone...
what is the update on KIES likely to be called?
I can see on KIES
Current firmware version - PDA:JJ3 / PHONE:JID / CSC:JJ3 ( CPW )
Latest firmware version - PDA:JJ7 / PHONE:JK5 / CSC:JJ5 ( CPW )
I am not sure why it shows ( CPW ) and get the feeling it is not the Gingerbread update.
Any advice much welcomed!
Ofiaich
This is same as mine that's a update to froyo I have the cpw aswell
thanks jutley!
I bought mine from Staples
So waste of time to do that update?
Ofiaich
Just wait. I went from JJ3 to JMI the other week (tesco tab)
Was that a Kies update or OTA (or did you manually flash)?
I'd not heard of anyone in the UK getting the update through Kies/OTA yet.
Guys, Gingerbread is only available in Italy at the moment. If you are waiting for Gingerbread you need to keep an eye on your countries official site, Until its on there you wont be able to get it via Kies.
Just connected to KIEs and got the following firmware update:
PDA:JMI / PHONE:JMA / CSC:JM2 (CPW)
Am I right in assuming that this is a Froyo release?
Yes that still is froyo-released in January for Europe....
I have my tab since December. It only updated to JMI/JMA/JM2 (CPW) via Kies today (June 21st).
Got it from the UK and am in Portugal.
Any idea why it took so long to get an outadated update? It was updated to JJ7/JK5/JJ5 (CPW) since January, I think.
I was really looking for GB here :-/
absolutab said:
I have my tab since December. It only updated to JMI/JMA/JM2 (CPW) via Kies today (June 21st).
Got it from the UK and am in Portugal.
Any idea why it took so long to get an outadated update? It was updated to JJ7/JK5/JJ5 (CPW) since January, I think.
I was really looking for GB here :-/
Click to expand...
Click to collapse
NOBODY EXCEPT SAMSUNG KNOWS ABOUT UPDATES.....and they also have pulled out the previously leaked(take note-leaked-not officially provided) Italian gingerbread without any reason.
Note: CPW is sales code for UK-no updates for UK......
Yesterday I connected to Kies and got the prompt to update firmware to Gingerbread.
I thought "great" and followed the on screen instructions. Anyway, the update failed, probably due to me running other programs at same time and not turning firewall/virus settings OFF.
So I did the 'emergency recovery' and ended up back where I started, with
PDA:JMI / PHONE:JMA / CSC:JM2 (CPW)
Now Kies says there is no update available, in so much as onthe Basic Information tab, it says the above firmware is the 'latest' one.
Anyone know why this might have happened, and how I can get Kies to recognise the Galaxy Tab (GT-P1000) is due a firmware update ?
I'm reading a lot of cloak and dagger stuff coming out about the Kies system and updates. Does this update come and go from the Kies system ? That would be odd....
cheers
Tony
We in Asia just got our second gingerbread update-from DXJPC to JPD.......!
bongski55 said:
NOBODY EXCEPT SAMSUNG KNOWS ABOUT UPDATES.....and they also have pulled out the previously leaked(take note-leaked-not officially provided) Italian gingerbread without any reason.
Note: CPW is sales code for UK-no updates for UK......
Click to expand...
Click to collapse
I understand that Samsung is the only one knowing when updates are done. My question was because I got an update yesterday that everyone got in January, for what I read in the forums.
Just found it weird and hoped someone had a clue!
absolutab said:
I understand that Samsung is the only one knowing when updates are done. My question was because I got an update yesterday that everyone got in January, for what I read in the forums.
Just found it weird and hoped someone had a clue!
Click to expand...
Click to collapse
Weird indeed-that Asia got 2 gingerbread updates in a span of 2weeks while the rest of the world had none since January.
Sent from my GT-P1000 using Tapatalk
why is samsung not bringing any updates in india ?
still stuck on KL1
sitanshu91 said:
why is samsung not bringing any updates in india ?
still stuck on KL1
Click to expand...
Click to collapse
KL3 is the Last update in India
Go to Settings > About Phone > Software Update > Update Then follow the instructions
or
Update via Kies.
ranjan.alva said:
KL3 is the Last update in India
Go to Settings > About Phone > Software Update > Update Then follow the instructions
or
Update via Kies.
Click to expand...
Click to collapse
Its long time after KL3..... Other countries moved to KL7.... LA1.........LA3.....and Today LA4............
After receving KL3 update just after a week in Europe, i thought India is getting Sammy's attention but it doesnt seems to be
katyarevishal said:
Its long time after KL3..... Other countries moved to KL7.... LA1.........LA3.....and Today LA4............
After receving KL3 update just after a week in Europe, i thought India is getting Sammy's attention but it doesnt seems to be
Click to expand...
Click to collapse
Don't worry there are to many but Few are for the same region country. Lets take DBT aka Germany latest firmware came today out xxla4 before that it was kl7 a month ago the rest was developer leaks from Europe la1 la3. So be patient and wait or start flashing all roms that comes out.
Sent from my GT-N7000 using Tapatalk
Hello everyone. I'm new to here. I have a problem in my galaxy S advance (I9070) First days I purchased it, it asked for System Update settings in Notification area. so I was selected the country as UK by mistake. So now I'm going to update it to JB, and the Kies software shows me a updates for UK, (XXLQE update) but i'm in a Asian country, I think that update for European country. If I update this, will it be compatible to my country ? is these europian updates can be used in asian countries ??. Please tell me how to change System Update Settings Country, there are no place to change it.
thanks
casting ssessin
geethnuwan said:
Hello everyone. I'm new to here. I have a problem in my galaxy S advance (I9070) First days I purchased it, it asked for System Update settings in Notification area. so I was selected the country as UK by mistake. So now I'm going to update it to JB, and the Kies software shows me a updates for UK, (XXLQ4 update) but i'm in a Asian country, I think that update for European country. If I update this, will it be compatible to my country ? is these europian updates can be used in asian countries ??. Please tell me how to change System Update Settings Country, there are no place to change it.
thanks
Click to expand...
Click to collapse
Sorry, the update is XXLQE
geethnuwan said:
Hello everyone. I'm new to here. I have a problem in my galaxy S advance (I9070) First days I purchased it, it asked for System Update settings in Notification area. so I was selected the country as UK by mistake. So now I'm going to update it to JB, and the Kies software shows me a updates for UK, (XXLQ4 update) but i'm in a Asian country, I think that update for European country. If I update this, will it be compatible to my country ? is these europian updates can be used in asian countries ??. Please tell me how to change System Update Settings Country, there are no place to change it.
thanks
Click to expand...
Click to collapse
Go to setting and do a factory reset to renew all setting in you phone but your app and phone number in yhe phone wii lost(in sim no effect)
Or you can try to download your jellybean firmware and flash it with odin
I'm in asia too. The asian for thai and nearby country is I9070DXAMD1 sorry for my english
genus wevicto
paratab said:
Go to setting and do a factory reset to renew all setting in you phone but your app and phone number in yhe phone wii lost(in sim no effect)
Or you can try to download your jellybean firmware and flash it with odin
I'm in asia too. The asian for thai and nearby country is I9070DXAMD1 sorry for my english
Click to expand...
Click to collapse
ok dear, thanks. and I'd like to know that what is the best JB firmware suitable for i9070. I read many reviews on the internet and found that the device will be slow down and will lag after install JB, Is that true ?
geethnuwan said:
ok dear, thanks. and I'd like to know that what is the best JB firmware suitable for i9070. I read many reviews on the internet and found that the device will be slow down and will lag after install JB, Is that true ?
Click to expand...
Click to collapse
You can use other region firmwares with no problem. Currently maybe the indian ddulp8 is the best without root imo. Yes, it is true but not on all device and I don't know why.
Hope this helps.