Database Develop

[MOD] radio 01.97.00R for AT&T

Taken from the leaked 2.3.4hktw and tested on my A4G. 2G/3G data/call works.
Flash like any other SBF's.
There are multiple reports saying it shows only one bar but speed is noticably faster,
while for me it is faster and showing correct signal bars.
I did a full wipe to perform BP clear. Maybe that's the reason.
http://mir.cr/5ZSLQUQJ

So, what are the benefits of this new Radio version?

Chubby_Skunk said:
So, what are the benefits of this new Radio version?
Click to expand...
Click to collapse
don't really know. my first impression is, it's slightly faster than 1.92.00R, handles 2/3G transition differently (better for me) and doesn't heat up like 1.87.00R.
i'll give it a few more days to see what happens.

racca said:
don't really know. my first impression is, it's slightly faster than 1.92.00R, handles 2/3G transition differently (better for me) and doesn't heat up like 1.87.00R.
i'll give it a few more days to see what happens.
Click to expand...
Click to collapse
so are the speeds the same?

flashed perfectly on my AT&T Atrix 4G with latest firmware.. reception is significantly lower but I scored the highest speedtest I've scored on this phone so far here in Australia.
4mbit/s download
1.65mbit/s upload
EDIT: I believe we can now confirm that there is an issue where it shows one bar but is probably a lot higher.

Chubby_Skunk said:
so are the speeds the same?
Click to expand...
Click to collapse
Just flashed this guys its safe on my att phone on 1.83 with gingerblur the download and upload speed is the same with 1 bar and i repeat only one bar i got 1.82 down and 1mpg upload i was getting that with full signal in my area with the other modded radio i recommend this!

ATT, I have the one bar issue....but I am getting around 1.8dl and 1.1 up. Did see a 3.6dl for one test

sifon187 said:
ATT, I have the one bar issue....but I am getting around 1.8dl and 1.1 up. Did see a 3.6dl for one test
Click to expand...
Click to collapse
havent seen my bar moved but idk its stable very smooth my twitter loads up faster and facebook but i know im speaking too early

sifon187 said:
ATT, I have the one bar issue....but I am getting around 1.8dl and 1.1 up. Did see a 3.6dl for one test
Click to expand...
Click to collapse
Mine is showing 3~4 bar (3G/HSPA) as it should and my dl/ul is also seeing a nice bump.
PS. I did a full wipe (because it clears BP data) after flashing this.

DarkRyoushii said:
EDIT: I believe we can now confirm that there is an issue where it shows one bar but is probably a lot higher.
Click to expand...
Click to collapse
maybe you can try
make a nandroid/titanium backup
a full wipe with stock recovery
restore your /data
it might help.

How do you nandroid back up an atrix? I've only ever used cwm. Is this something new?
Sent from my MB860 using Tapatalk

sifon187 said:
ATT, I have the one bar issue....but I am getting around 1.8dl and 1.1 up. Did see a 3.6dl for one test
Click to expand...
Click to collapse
I see similar numbers without it though. 3.3D, 1.1U. GingerBlur 4.5

racca said:
maybe you can try
make a nandroid/titanium backup
a full wipe with stock recovery
restore your /data
it might help.
Click to expand...
Click to collapse
thanks for the suggestions, it doesn't bother me enough for the effort involved to fix it

This radio caused my GPS not to work. It shows me off by over a Mile.

hoodlikegaza said:
How do you nandroid back up an atrix? I've only ever used cwm. Is this something new?
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
I believe it's the same thing...someone correct me if I'm wrong.

I'm also seeing the 1 bar issue. Don't feel like formatting everything for this...Will see how it goes.

Gps works perfect. Just came from a 2 hr drive.
Sent from my MB860 using XDA Premium App

how to flash? tried to do rsd lite but start button is greyed.

Downloading now Thanks!!! I'm hoping this may fix my problem with my signal dropping all the time!! I'm just gonna flash the 1.83 firmware full version sbf that should do a full wipe right?If that doesn't do a full wipe then I'll just flash back down to 1.26 then update accordingly as usual. Then flash this radio.

Gutterball said:
Downloading now Thanks!!! I'm hoping this may fix my problem with my signal dropping all the time!! I'm just gonna flash the 1.83 firmware full version sbf that should do a full wipe right?If that doesn't do a full wipe then I'll just flash back down to 1.26 then update accordingly as usual. Then flash this radio.
Click to expand...
Click to collapse
you should only flash to stock if necessary, just perform the wipe as usual then flash the radio, personally I try to keep flashing to a minimum, not a fan of $500 bricks but maybe that's just me.....

[ROM / GT-P7510] - Stock Rooted / No Mods / De-Odex'ed - HC 3.2 - HTJ85B.UEKMP

As the name implies this is a bone stock rooted ROM with the exception of root and busy and its de-odexed.
I also updated all the apps. So its not really bone stock but.. Close enough
This ROM has two purposes...
1. For someone that wants just that, a stock rooted ROM with no mods.
2. For others that want to dive into development or at least tinker around with there own custom ROM. This is a great base to work from! All the menial tasks such as rooting and de-odeodexing have been done for you.
Hope you find value in this!
-Scott
Please hit the Thanks button if you like this offering. Hit the Donate button if you really like it ​

Reserved for possible future use...

Is this for Wifi only? or does it make a difference?

mvaughn12 said:
Is this for Wifi only? or does it make a difference?
Click to expand...
Click to collapse
Correct, WiFi only. GT-P7510 = WiFi only model.
It may work on on the variants but I really dont know because I dont have one.
If the mount points are the same then you can flash it and let us know.
What model do you have?

I have the wifi only, and am trying to get a stock only rom thats rooted, i download a rom and each time i try to download from market i keep getting download failed so i figured i try stock again and yours looks prettty promising.

mvaughn12 said:
I have the wifi only, and am trying to get a stock only rom thats rooted, i download a rom and each time i try to download from market i keep getting download failed so i figured i try stock again and yours looks prettty promising.
Click to expand...
Click to collapse
If you get download failed try to clear market data in Application Settings. That usually fixes the dreaded market download failure.

Thanks, I tried that several times still could not get it work work hopefully your rom will fix this for me.

mvaughn12 said:
Thanks, I tried that several times still could not get it work work hopefully your rom will fix this for me.
Click to expand...
Click to collapse
Yes, let me know. I would be interested to see.
Also, did you try to wipe cache and dalvik cache?

Not sure whats going one but all 8 of my devices from my tablets to my phone are getting a unable to download due to a (-101 error) I emailed the market to see what the issue is.

mvaughn12 said:
Not sure whats going one but all 8 of my devices from my tablets to my phone are getting a unable to download due to a (-101 error) I emailed the market to see what the issue is.
Click to expand...
Click to collapse
Wow... I wonder if they locked your account or something. I just tried on my phone and it was fine. Making a new Tab ROM so I cant test that now.
Did you Google the error by any chance?

I googled it and it seems like there was a issue like this last year and it was due to a download limit supposley it was fixed then

I'm on stock KMN that I rooted myself and am showing an update to KMP, but it fails every time so I figure it's probably due to the fact that I'm rooted.
That said, I thought I would give this a try, but I'm loath to reinstall everything afterwards so my question is whether this requires a wipe? I'm assuming this is installed from recovery, is that right?

Quist said:
I'm on stock KMN that I rooted myself and am showing an update to KMP, but it fails every time so I figure it's probably due to the fact that I'm rooted.
That said, I thought I would give this a try, but I'm loath to reinstall everything afterwards so my question is whether this requires a wipe? I'm assuming this is installed from recovery, is that right?
Click to expand...
Click to collapse
nope...no wipe required.

ezcats said:
nope...no wipe required.
Click to expand...
Click to collapse
But highly recommended.
Sent from my SGH-T989 using xda premium

Towle said:
But highly recommended.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
no...its not....when you are updating to a newer version of a samsung stock rom...you never need to wipe...from ICS here..yes..from 3.2 to 3.1 ....yes
3.1 or 3.2 to this...no

ezcats said:
no...its not....when you are updating to a newer version of a samsung stock rom...you never need to wipe...from ICS here..yes..from 3.2 to 3.1 ....yes
3.1 or 3.2 to this...no
Click to expand...
Click to collapse
Oh wow lol my bad I have no idea how I clicked on this thread, I thought I was in the Clean ROM thread. So I was like, uh yeah you should wipe lol But wrong thread sorry.
Sent from my SGH-T989 using xda premium

Are your downloads on your own server or something? Just wondering why it takes a while to download your roms.

Is Touchwiz included in this stock?

mvaughn12 said:
Is Touchwiz included in this stock?
Click to expand...
Click to collapse
Yes.
Sent from my SGH-T989 using xda premium

Jay Rock said:
Are your downloads on your own server or something? Just wondering why it takes a while to download your roms.
Click to expand...
Click to collapse
Yeah...he should make a mirror...but its not slow...it took about 3 minutes compared to like 2 from media fire.

[Q] Gingerbread with Sense

What happened to Rock Steady CM7 with Sense? The thread is closed and the download links don't work.
http://forum.xda-developers.com/showthread.php?t=1003069
Is there any way to get CM7 for the Hero with Sense?
If not, there is Gingerbread with Sense. I found Sensible Gingerbread on the Wiki.
http://forum.xda-developers.com/showthread.php?t=1059481
When I flashed the ROM earlier it would not work, but I'll try again later.

Check out the Hero Development forum. There's a gingerbread ROM with sense 3.5 called Zero Hero. I don't even like sense on our Heros and i think its pretty sweet.
http://forum.xda-developers.com/showthread.php?t=1287844

Thanks, I saw that and tried it. Is the browser the only thing that doesn't work?

M-man10 said:
Thanks, I saw that and tried it. Is the browser the only thing that doesn't work?
Click to expand...
Click to collapse
If the browser doesn't work download Opera or Dolphin. Will work just fine. We optimized that rom to run pretty damn good in these old heros. Just don't fill up the home screens and tons of apps or it will bog down.
Sent from my PG86100 using xda premium

Thanks for the reply. I'll try Dolphin since I've used it before and it was okay. I don't know why, but I prefer the original Browser.
EDIT: Oh and btw, WiFi was not working for me on Zero Hero Sense. Is there a way to fix that?

hey just an fyi we dont talk about rocksteady around here the guy who made the ports was bannanas to say the least matt knows what im talking about lol.

Oh ok sorry.
The Sensible Gingerbread says to flash FR-recovery. What is that? I currently have ROM Manager and the Clockwork Recovery. Whenever I try to flash Sensible Gingerbread with that, it reboots into recovery every time I try to reboot it.

firates is just a tool that partitions your sd card for better memory management theres a thread in development on how to set it up.

M-man10 said:
Thanks for the reply. I'll try Dolphin since I've used it before and it was okay. I don't know why, but I prefer the original Browser.
EDIT: Oh and btw, WiFi was not working for me on Zero Hero Sense. Is there a way to fix that?
Click to expand...
Click to collapse
reboot will fix this
Sent from my PG86100 using xda premium

Bierce22 said:
hey just an fyi we dont talk about rocksteady around here the guy who made the ports was bannanas to say the least matt knows what im talking about lol.
Click to expand...
Click to collapse
I see almost another one
Sent from my PG86100 using xda premium

Is there something different that I need to do for Sensible Gingerbread than I do for most roms?
The original thread says
How to install(might be a waste of time)
wipe ALL, flash FR-recovery, wipe ALL, reboot recovery, flash ROM, reboot. It is also recommended that you have an s-off bootloader, since FR is a recovery modification. It installed fine for the testers, so YMMV. But be warned, bricks are your fault, not someone elses Also, the CPU frequencies are now 245xxx (needs to be fixed, keep reading) - 729xxx (careful, some phones can only handle 691xxx). You need an overclock method (setCPU, overclock widget) to change the frequencies to 264xxx - 691xxx.
Click to expand...
Click to collapse
Can I use ROM Manager and the recovery from that and install rom from sd card? Thanks for all the help guys.

Yes
Sent from my PG86100 using xda premium

Is viper rom Compatible with team Seven?

I want to have sense 5 to be one 4.2.2 so that's why I want viper rom but I also need the htc logo menu hack from teamseven is this possible? If not what other kernel let's me have the htc logo hack but is compatible with viper rom. And finally I hearD that viper rom is very glitchy if that's true then is team Seven compatible with android revolution?
Sent from my HTC One using xda app-developers app

radsherwin said:
I want to have sense 5 to be one 4.2.2 so that's why I want viper rom but I also need the htc logo menu hack from teamseven is this possible? If not what other kernel let's me have the htc logo hack but is compatible with viper rom. And finally I hearD that viper rom is very glitchy if that's true then is team Seven compatible with android revolution?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I believe it is compatible. Flar2's Bulletproof and ElemenatlX kernels both work great with ViperOne and are highly recommended. Both have,the logo to menu function.
I do not know where you heard Viper is glitchy, have been using it since the day it was released with absolutely zero issues. Tons of customization, great and supportive devs, and rock stable. I highly recommend it.

Thank you very much! My last question is how do to uninstall my current roms I have no backup since.... Well its a long story?
Sent from my HTC One using xda app-developers app

radsherwin said:
Thank you very much! My last question is how do to uninstall my current roms I have no backup since.... Well its a long story?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I would backup my apps with Titanium, install the Rom with a full wipe (won't touch your SD card with Viper), flash the custom kernel, then restore my apps with Titanium.

I have clockwork mod Is this still possible?

Viperone also comes with venom hub where you can flash compatible kernals just open go to downloads then kernals think they have 5 or 6

Okay so I did a data/factory reset and when I try to install through ADB sideloader It gets stuck at flashing Kernel.
Is the viper ROM Compatible with AT&T? All I see is stuff about Sprint. Can you link me to a AT&T download please.

radsherwin said:
Okay so I did a data/factory reset and when I try to install through ADB sideloader It gets stuck at flashing Kernel.
Is the viper ROM Compatible with AT&T? All I see is stuff about Sprint. Can you link me to a AT&T download please.
Click to expand...
Click to collapse
Where are you looking at and getting ViperOne?
http://forum.xda-developers.com/showthread.php?t=2334294
That is the link, and it specifically says its Not for Sprint. That is the AT&T download. You have to flash version 1.0 first, reboot, then flash the 1.0-1.21 update.
Also, why are you sideloading? Just download 1.0, reboot to recovery, and flash the file thru recovery. Unless you wiped your rom in the first place, no reason to sideload.
Hope this helps....

lol this is th elink I was looking at http://forum.xda-developers.com/showthread.php?t=2241016

radsherwin said:
lol this is th elink I was looking at http://forum.xda-developers.com/showthread.php?t=2241016
Click to expand...
Click to collapse
Oh, lol. Yeah, that one won't work for AT&T. I had a feeling you weren't looking at the right thread. You should be good to go now!

Thanks It should work but Just to be clear I flash Viper one 1.0.0 then The Update 110 - 121 Then Flash the teamSeven rom?
I did this for the google editon rom but I missed Sense 5 SO Im Going back.

radsherwin said:
Thanks It should work but Just to be clear I flash Viper one 1.0.0 then The Update 110 - 121 Then Flash the teamSeven rom?
I did this for the google editon rom but I missed Sense 5 SO Im Going back.
Click to expand...
Click to collapse
You're welcome! Yep, you have the steps down, just reboot between each flash and you should be good! Happy I could help.

dgtiii said:
You're welcome! Yep, you have the steps down, just reboot between each flash and you should be good! Happy I could help.
Click to expand...
Click to collapse
I ran Into a minor problem. IT asked me to sync contacts but I hit no. Now I want to sync. MY gmail account says it has like 200 contacts and my phone says it has like 180 but They don't show up in my phone app.

radsherwin said:
I ran Into a minor problem. IT asked me to sync contacts but I hit no. Now I want to sync. MY gmail account says it has like 200 contacts and my phone says it has like 180 but They don't show up in my phone app.
Click to expand...
Click to collapse
I think just delete your Google account from your phone, then add it again.

dgtiii said:
I think just delete your Google account from your phone, then add it again.
Click to expand...
Click to collapse
Okay well Everything Is working all the roms It seems titanium backup lost my backup probably because I did a factory reset.

radsherwin said:
Okay well Everything Is working all the roms It seems titanium backup lost my backup probably because I did a factory reset.
Click to expand...
Click to collapse
I'm glad everything is working! Sucks about titanium, but you can get past that, even though its a pain. Have fun playing with Viper, there are a ton of tweaks and customizations to try out! Enjoy....

dgtiii said:
I'm glad everything is working! Sucks about titanium, but you can get past that, even though its a pain. Have fun playing with Viper, there are a ton of tweaks and customizations to try out! Enjoy....
Click to expand...
Click to collapse
I've noticed that my phone overheats now. at times around 105*F But then I went to the teamSeven aroma installer and put medium throtteling now phoen is a bit better but still gets pretty hot. Is that normal?

Cyanogenmod installer released with support for sprint HTC one

So anyone gonna try it out? To busy at the moment but I'm really curious on if it works and also what version it's on
Sent from my HTCONE using XDA Premium 4 mobile app

XxCE0xX said:
So anyone gonna try it out? To busy at the moment but I'm really curious on if it works and also what version it's on
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
this is only for people who dont know how to install their own recoveries and stuff
this is of no use to flashers

I'll flash if its a new stable build than the one in the forum.

Oh wow sir thanks so much for the amount of ego you just labeled "flashers" with. Anyone else with actual input?
Sent from my HTCONE using XDA Premium 4 mobile app

XxCE0xX said:
Oh wow sir thanks so much for the amount of ego you just labeled "flashers" with. Anyone else with actual input?
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He saying its for people who don't know how to follow directions or are afraid to root because they aren't technically inclined. From what I've seen its a one click noob proof method.
Considering were xda members, we're already familiar with rooting and flashing ROMs, this isn't for us.

XxCE0xX said:
Oh wow sir thanks so much for the amount of ego you just labeled "flashers" with. Anyone else with actual input?
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
on that note
run it and mess up your phone please. i dunno what ego has to do with knowing how to flash a rom
typical sensitive user
im out

Watched qbkings video on it earlier and I have to say that cyanogen has really out done themselves. It's looks really clean and easy to use. It's perfect for people new to android modding.

All the new kids on the forums looking to flame. More curious on how CM has been doing getting prepared to release the oppo. Nice to know it works. Btw. Ofc the people here know how to flash. Currently on beanstalk ~~
Sent from my HTCONE using XDA Premium 4 mobile app

Tried It
Just from my experience, it works well! Used it while running Elegancia 20.0 (with S-Off)
I did encounter a bug though. After it sideloads the rom for the first time, you need to manually reboot into recovery for it to install the apps or else you'll be stuck in a animation bootloop.

So what all does it do? I know it unlocks the bootloader for you, but does it install a recovery as well, or just install the ROM and leave it at that?

eXplicit815 said:
So what all does it do? I know it unlocks the bootloader for you, but does it install a recovery as well, or just install the ROM and leave it at that?
Click to expand...
Click to collapse
Installs cwm recovery, ROM, and I think gapps
Sent from my HTCONE using Tapatalk

Kudos the dev team for the installer app
Tried it myself on my HTC device. Works pretty good. But it has its faults as the installer will stump a couple of people not familiar with loading roms, unlocking devices, and recovery menus.
1. You gotta install HTC sync to install the HTC USB drivers. Then un-install the HTC syn software only. I had to debug this process on my end b/c the SYC software would cause a conflict with the Cynanogen installer. And was having issues when putting the device in debug mode > from the developer options.
2. The installer did unlock my phone, asked for token and all.
3. During the rom install, it did reboot the phone and caused me start the whole process over again; this happened about 2 times.
4. It does not install Gapps, you must get them and side load them via the recovery menu.
Other than that it worked like it was supposed to. It flash the follwing:
-CM 10.2-20131101-SNAPSHOT-InstallerBeta3-m7spr
-Android 4.3.1
Alas it did not fix the camera issue that has been plaguing some users ( a blue purple tint when taking pictures). Overrall its a good step in helping "teh noobs" in using custom roms on their smartphones.
---------- Post added at 01:12 AM ---------- Previous post was at 01:01 AM ----------
Tried it myself on my HTC device. Works pretty good. But it has its faults as the installer will stump a couple of people not familiar with loading roms, unlocking devices, and recovery menus.
1. You gotta install HTC sync to install the HTC USB drivers. Then un-install the HTC syn software only. I had to debug this process on my end b/c the SYC software would cause a conflict with the Cynanogen installer. And was having issues when putting the device in debug mode > from the developer options.
2. The installer did unlock my phone, asked for token and all.
3. During the rom install, it did reboot the phone and caused me start the whole process over again; this happened about 2 times.
4. It does not install Gapps, you must get them and side load them via the recovery menu.
Other than that it worked like it was supposed to. It flash the follwing:
-CM 10.2-20131101-SNAPSHOT-InstallerBeta3-m7spr
-Android 4.3.1
Alas it did not fix the camera issue that has been plaguing some users ( a blue purple tint when taking pictures). Overrall its a good step in helping "teh noobs" in using custom roms on their smartphones.

flex360 said:
this is only for people who dont know how to install their own recoveries and stuff
this is of no use to flashers
Click to expand...
Click to collapse
You know you sound ridiculous, right? I know how and have rooted/flashed so many roms on my Evo that I got kind of burnt out. I was one of the early adopters that had to go through the 45 min, you could very possibly brick your phone, root method. The two reasons I haven't gone through it with the One is I don't have the time, but more importantly, I don't have the patience. This takes away all effort/worry/questions. I was probably going to just let the One be, now I will most likely root in the next few days. Do I necessarily want CM? No. This will make me put it on my phone and try it before I flash something else now though.
That is my thinking as an experienced flasher. "Knowing how" and choosing to do it the inefficient way sounds like you are a hipster or something.

hmooblis said:
Installs cwm recovery, ROM, and I think gapps
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
So right from a stock phone without root, s-off, unlocked bootloader, etc... It'll unlock, root, and install CWM, and CyanogenMod? Wow... They've really pulled off a miracle.

lehalter said:
That is my thinking as an experienced flasher. "Knowing how" and choosing to do it the inefficient way sounds like you are a hipster or something.
Click to expand...
Click to collapse
Lol hipster flashers.
Sent from my HTCONE using xda app-developers app

The thing is, nobody's really wrong here. If you already are familiar with the process of flashing, than this is of little use to you, other than checking it out. If you are new to flashing, this gives you a more safe and simple way to go about it. Whether or not you use or like CM, it is still a great leap forward that a development group is taking it upon themselves to offer solutions to problems that plague any user with a taste for customization. And we are all hipsters here, in the sense that the vast majority of device users have no idea what we do here or how we do it. Even more don't care. I think everybody finds that it is easy to misunderstand or read attitude where there is none actually intended. It happens to me all the time. My penny and a half.

I tried it, unfortuantely, it just rebooted the phone into the bootloader and stops. I'm sure it's because I have twrp installed. I have no idea how to switch from twrp to cyanogen.
EDIT: Okay their wiki is a lot better now, AND the mountpoints are correct! cyanogen recovery worked, flashing last nights 10.2 nightly, wish me luck!
I'm gonna miss my HTC Sense I think :\

thefritob said:
I tried it, unfortuantely, it just rebooted the phone into the bootloader and stops. I'm sure it's because I have twrp installed. I have no idea how to switch from twrp to cyanogen.
EDIT: Okay their wiki is a lot better now, AND the mountpoints are correct! cyanogen recovery worked, flashing last nights 10.2 nightly, wish me luck!
I'm gonna miss my HTC Sense I think :\
Click to expand...
Click to collapse
If you like Sense, but want some custom features too, and a really cool UI, try Renovate.....don't normally plug my or anyone else's work in another thread, but I was floored. The first stock-based ROM that dragged me away from Beanstalk...

I tried it. Got the same problem a few people ran into having to reboot manually in the middle of it.
One issue I've run into is I cannot connect to 4g LTE and there's no toggle for it anywhere. Anyone know a fix to this?

flex360 said:
this is only for people who dont know how to install their own recoveries and stuff
this is of no use to flashers
Click to expand...
Click to collapse
Now you tell us... it uninstalled twrp and put cwr instead