Hi, after flashing Abyssnote 2.0 kernel, during reboot samsung animation passes and pulsing samsung logo appear - and phone never boot. Tried wipe cache and dalvik cache. Didn't help. Any suggestions?
Firmware official KK9
Related
Hi guys. Tried to root my Note but got stuck at samsung logo. so I went back to download mode and flashed back to N7000DXLP9 and tried a few other different stock roms as well. But I keep getting stuck at Samsung logo. Please help guys.
Simply go to recovery mode. Wipe catch / factory reset - reboot
chintamanijaipuri said:
Simply go to recovery mode. Wipe catch / factory reset - reboot
Click to expand...
Click to collapse
tried that many times but still stuck at samsung logo
any other suggestions?
Have Same Problem Brother
mee too got same problem any help would be appreciated..!
How long did you wait. I found that after installing a new rom or factory wipe that it would take up to 5 minutes to boot. It would just sit at the samsung logo with a pulsing glow for ages.
Maybe you just need to give it more time?
What tools and packages did you use?
zolakt said:
tried that many times but still stuck at samsung logo
Click to expand...
Click to collapse
Wipe cache, do a factory reset, wipe dalvik cache. If still stuck, it looks like a bad flash/kernel problem. Try flashing it again.
Finally succeed
It's work for me, I simply entered my galaxy S3 into recovery, make factory reset, wipe chache and then reboot and my S3 finally boot normally. Thank You all.
Make my thorough wipe as below when flashing a new ROM:
1) Wipe data
2) Wipe cache
3) Wipe dalvik cache
4) Format /system & /preload
5) Format internal sdcard (make sure you save anything you need before)
6) Flash ROM
7) Wipe cache again
8) Wipe dalvik cache again
9) Reboot
This way you ensure you flash your new ROM in a completely clean environment. Then when booting the new ROM, wait some time before saying it's stuck at the boot logo. As people already said, sometimes it takes a long time to display the setup screen (but should be less than 8 minutes in any case). I'm assuming you have CWM to do this; if you don't, try the equivalent in the stock recovery (but it doesn't have all these options), poweroff, boot in download mode, then flash using Odin.
ATTENTION: make sure you make the wipes using a brick-free kernel! Search the forums if you don't know what it is. If you don't, you may brick your phone. You should flash a brick-free kernel before anything, without any wipes (it can be done through Odin if you download a safe kernel in this format); then you are ready to go with the wipes and flashing a new ROM.
my j500h keeps on restarting just after displaying samsung logo. i have tried nearly everything but seem to be stuck on the same bootloop. any idea am so stressed up.
I tried following the steps indicated in this thread http://forum.xda-developers.com/showthread.php?t=1424997. I was able to successfully flash the ROM N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2---Download--Philippines (Smart) . I was already on the last part where the phone should reboot and would install some applications but the phone is just stuck on the Samsung logo screen. I waited for almost 2 hours already. I tried taking out the battery and rebooting the phone but its still stuck in the Samsung logo. The Volume down+home+power key is still working as well as the volume up+home+power key. I don't want to take another step because I'm afraid of my phone getting bricked.
I previously had a Jellybean custom ROM installed but don't like it since S-Pen features aren't working.
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
You need a factory reset but 4.0.4 is not a safe kernel, that's why you need Philz kernel.
If you want a full stock ROM with kernel (like I need to send for warranty repair),
flash any GB stock rom appropriate for you, (still hang at samsung logo),
factory reset on recovery and update using kies to 4.0.4
nokiamodeln91 said:
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
Click to expand...
Click to collapse
Follow him not one above me
Sent from my GT-N7000 using Tapatalk 2
Stuck at Samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
Click to expand...
Click to collapse
if you are using N7000 then siyah kernel is not meant for this device as yet.
try to philz kernel if you can access recovery and then try to flash alliance rom.
or simply flash stock rom accessing the download mode.
I was on stunner 2, was setting up and things, just log in google+ then it suddenly reboot itself, and stuck on n7000 logo, tried recovery to restore my backup cwm recovery from pacman, which just stuck and reboot itself in n7000 logo, so i flashed stock rom on odin which passed everything, but still stuck on n7000 logo after reboot :crying:
whitepandaaa said:
I was on stunner 2, was setting up and things, just log in google+ then it suddenly reboot itself, and stuck on n7000 logo, tried recovery to restore my backup cwm recovery from pacman, which just stuck and reboot itself in n7000 logo, so i flashed stock rom on odin which passed everything, but still stuck on n7000 logo after reboot :crying:
Click to expand...
Click to collapse
have you redownload your rom or try different rom?
Go to recovery, wipe data & cache and dalvik cache. Then flash a stock ROM and hopefully it'll be solved.
whitepandaaa said:
I was on stunner 2, was setting up and things, just log in google+ then it suddenly reboot itself, and stuck on n7000 logo, tried recovery to restore my backup cwm recovery from pacman, which just stuck and reboot itself in n7000 logo, so i flashed stock rom on odin which passed everything, but still stuck on n7000 logo after reboot :crying:
Click to expand...
Click to collapse
Download the stock rom and flash via Odin for safe boot.
Otherwise flash it with some stable rom and kernel.
Hit thanx if i helped
Hi everyone,
I've deodexed my rom with JoelDroid deodexer batch and at boot, I'm stuck on the Samsung logo. Why? I've got the I9295XXUDOD3 firmware, and i've tried to flash this I9295XXUDOD3_deodex.zip, and before flashing, I had done a wipe factory reset , wipe cache and wipe dalvik cache, but at the boot, i'm stuck on the Samsung logo.
I've tried to flash this : http://forum.xda-developers.com/gala...udob4-t3051280
Thanks.
I was running the latest night owl rom just fine. This morning however the phone was stuck on boot logo.
Restart, taking out the battery and even reflashing the rom or other versions doesn't help.
I can still access recovery (philz touch 6). I can wipe cache and format /cache but the phone crashes/reboots on wipe dalvik/art.
any suggestions?
thanks!