Hi all,
Understand this is a boring topic, but I am facing a problem on connecting my i9000 back to PC.
Problem was occured after I login to recovery mode, wipe the phone and clear the cache before applying JG1 (Russia version).. after the flash process completed and loaded the phone lock screen (after the animation), It keeps pop up error (in Russian)... cant be stop..
then I try to Odin3 it again, then I found that my phone no longer recognize by windows anymore...
I have re-installed the usb drive, but windows just not recognize the device as a USB Composite or ADB device.. so basically i cannot restart the phone as Download mode for Odin3..
do i force the device to read my external SD card instead of the internal one?
what driver i need to get it connect to windows? << -- I guess this is the option I can bring my phone back as normal (to re-Odin3)
I tried factory reset,,, but yes, it bring back the Russia version only..
Kindly advice.. much appreciated.
jsonseven said:
Hi all,
Understand this is a boring topic, but I am facing a problem on connecting my i9000 back to PC.
Problem was occured after I login to recovery mode, wipe the phone and clear the cache before applying JG1 (Russia version).. after the flash process completed and loaded the phone lock screen (after the animation), It keeps pop up error (in Russian)... cant be stop..
then I try to Odin3 it again, then I found that my phone no longer recognize by windows anymore...
I have re-installed the usb drive, but windows just not recognize the device as a USB Composite or ADB device.. so basically i cannot restart the phone as Download mode for Odin3..
do i force the device to read my external SD card instead of the internal one?
what driver i need to get it connect to windows? << -- I guess this is the option I can bring my phone back as normal (to re-Odin3)
I tried factory reset,,, but yes, it bring back the Russia version only..
Kindly advice.. much appreciated.
Click to expand...
Click to collapse
hmmm.. why not try to force unmount then format your internal SD card then reset to Factory default.
after doing so, update using the latest EURO firmware which is the JG5.. and just a reminder.. do use the pit version *512 and not the *513 or else you will have a temporary headache bro.
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
Hi All...my phone upgrade to 2.3.6 then cannot connect to PC via usb it show "hardware not recognize..even my phone go in download mode odin also cannot detect my phone..here is the step i was taken
- factory reset
- wipe
- use *#7284# change to usb in PDA mode
- change 6 usb cable.
- try 2 difference laoptop
- install latest samsung kies
- install latest samsung driver
- uninstall driver ,use ccleaner clean registry and install driver again.
- check debugging mode and mass storage
any more idea to solve the problem cause previously before i upgrade my phone can connect to PC..is it update to 2.3.6 must use difference driver?
So i decide to flash rom use external sdcard.
But my recovery mode is 3e so i cannot install CWM..
I found one method to replace the recovery file at XDA..
i try but wonder why when i boot in to recovery mode the recovery file will auto go back to the original file so i cannot install update.zip to install CWM..
Any one can help..i just want to flash back the old rom..
very thanks..
are you using an USB hub?
I noticed that my phone sometimes has trouble connecting fully functional when I don't plug in the USB cable directly in an USB port of my laptop. (only charging, no data transfer possible otherwise)
No...i am not using any usb hub...i direct connect to my usb...
So your phone is working well but u can't connect to PC or phone is dead !!!
If phone is ok then use 'SGS kernel flasher' or 'mobile odin' to flash new kernel (like semaphore kernel) to have CWM.
Hi to all!
From Yesterday i have i sudden problem i never had.
When i connect my i9000 does not anymore show the 2 drives (usb storage of both internal external sd) on my computer.
I use Glitch kernel with latest cm7 kang.
When i connect the phone via usb to the pc,sometimes i get the erroe usb device not recognised (win 7 x64), and connects and disconnects randomly(always showing the error),other times doesnt do anything.
I tried cleaning the port,different pc usb port,different pc's, factory reset,different cable,older versions of glitch kernel or cm7.
Formatted also boot and system folders(of course also wipe data etc).
Installed kiss,boot the pc with phone off and then on.
Tried win7 x64 drivers.Sometimes i get on windows unknown device that i cannot find drivers that accepts.
On off usb debug mode and restart.
Nothing seems to work for me.
So id like to ask.....Should i try to go back on stock(firmware+kernel)?
And how is it done???
Or maybe its the port fault?
Any ideas?Noone?
Could someone please tell me how to go back on stock?
First to stock kernel then to stock firmware?
Thanks
The "device not revognised" error is related to USB debug mode, unless you have installed Google USB drivers.
Its not supposed to occur with debug mode=off.
Going back to stock (Leaked JVU) is explained here:
http://forum.xda-developers.com/showthread.php?t=1431596
Thanks for the link.
Going back to stock worked for a friend of mine,which came today(he has the same phone with cm7.2 rco and glitch kernel but with usb port working)by simpling entering on download mode and flashing with odin.Drivers installed (from samsung drivers folder,after installing kies)
On my phone,on download mode,or it doesnt say anything or i get on pc the message uknown device,cannot install etc.If i try to manual push the drivers it says the device cannot start.
So it must be a hardware related problem no??
In this case ,because i am still on warranty,is there any other way (for example via cwm) to put stock firmware and kernel in order to claim warranty?
Many thanks for your posts.
I installed 4.4.2 Rom Mackay.
MacKay recovery and install the kernel as normal ...
MacKay ROM PC phone has ever seen ...
I've done all WiPeer and what's in the said format and went to wipe
the phone just now entering download mode not recovery mode, the phone?
y in download mode, remove the USB device is not recognized when I say tactics?
I did not see anyway PCs
now I do not see ...
I uninstall the drivers did not have to restore.
s3's got no problem seeing him in a way he never did anything not connected to the phone from your pc.
Thank you in advance for your help ...