Hello there
first of all sorry for my english, i am not a native english speaker. Well, I rooted my xperia x8 and installed xrecovery acording to this page, so far so good. Then i downloaded FroyoBread v023 Final, entered xrecovery and installed it. After the instillation was finished i choose to reboot. Now it shows the android logo and it is stuck there for at least 20 minutes. How much time should i wait?
Thanks in advance.
in xrecovery
-try full wipe
-wipe cache
-wipe dalvik cache
after and bfore u install a rom
ur baseband is xxx15 right?
Sent from my X8 using xda premium
maliceomalice said:
in xrecovery
-try full wipe
-wipe cache
-wipe dalvik cache
after and bfore u install a rom
ur baseband is xxx15 right?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
I am not sure about the baseband, if it is not xxx15, i will have a problem? I will try the three wipes and i will post later.
well, how cool are you? it worked. thank you very much.
gokuthelegend said:
well, how cool are you? it worked. thank you very much.
Click to expand...
Click to collapse
it works using the wipe?
hit thanks if i helped
Sent from my X8 using xda
premium
maliceomalice said:
it works using the wipe?
hit thanks if i helped
Sent from my X8 using xda
premium
Click to expand...
Click to collapse
Yes it worked. I didn't use the full wipe the first time, i only did the other wipes. When i did the full wipe then worked.
Hey i have very same problem with gingerdx... yesterday i was using it normally then i was need to go back to stock cuz i brick my phone, now i go to xRec and CWM and try to install gdx but it stucks at sony ericsson logo+ i tried other roms like ginger xperia, bootloop is well.. what to do man?
stock rom - not rooted , cuz i brick it and need to do everything again..
proadi96 said:
Hey i have very same problem with gingerdx... yesterday i was using it normally then i was need to go back to stock cuz i brick my phone, now i go to xRec and CWM and try to install gdx but it stucks at sony ericsson logo+ i tried other roms like ginger xperia, bootloop is well.. what to do man?
stock rom - not rooted , cuz i brick it and need to do everything again..
Click to expand...
Click to collapse
stock rom - cuz i brick it and need to do everything again..
so...right now ur at stock rom? ur baseband and everything is thr right one? baseband xxx15
just follow the guide, but gdx v14 n above need to use cwm
Sent from my E15i using xda premium
maliceomalice said:
so...right now ur at stock rom? ur baseband and everything is thr right one? baseband xxx15
just follow the guide, but gdx v14 n above need to use cwm
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes everything is right , i did use cwm but with no luck;(
stock rom - , cuz i brick it and need to do everything again..
Related
i flashed ginger dx (tried several versions) all of'em freezes on ginger dx logo exept v01
i tried ful wipe and wipe cache and it didnt work
can anyone help me ?
Ok try this steps.
1ownload gingerDX v13 and put it in the root of your sd card.
2:Rename it to update.zip normaly you dont have to add the .zip caue the file is already zip so you just name it update.
3:Before installing it make a FULL WIPE.
4:Install The update.zip gingerDX v13.
5:AGAIN MAKE A FULL WIPE THEN REBOOT YOUR PHONE !
6:Allow it up to 5-10 minites to boot.
Try this steps i made and tell me how it went.
Also make sure that your phone is baseband 015.
Settings->About phone->Baseband version->M76XX-TSNCJOLYM-53404015. If you have not this baseband, read this thread about basebands.
still not working
i did it all and it didnt work out
plzzz help me
p.s : it is baseband 015
What rom are you coming from ie 2.1 2.2
super.sense on x8
help ???
i tried from the stock eclair from gingerdx v01 from srom froyo v3 from srom gingerbread from ginger xperia it didnt work
any help please ?
please someone help me ?????
Try to insall cwm recovery and download latest gingerdx v0.15 and try to install it with cwm, because all gingerdx after v0.14 working only with cwm.
P.s. If you dont know how to install cwm just search forum there is one multifunctional program for this
Sent from my E15i using XDA App
tried it before and it didnt work bbut thx
any solution for my problem ?
at least a camera fix for ginger dx v01 ?
bxmx666 said:
tried it before and it didnt work bbut thx
any solution for my problem ?
at least a camera fix for ginger dx v01 ?
Click to expand...
Click to collapse
Try some other rom, try gingercrutz its also awesom rom and you can install it with xrecovery
Sent from my E15i using XDA App
dsaklein said:
Try some other rom, try gingercrutz its also awesom rom and you can install it with xrecovery
Sent from my E15i using XDA App
Click to expand...
Click to collapse
i tried gingercruzt 7.4 , latest kuyadroid , froyobread v 23 , latest fd xperience
same thing happened
I dont know really what it can be, but maybe you got wrong xrecovery you should install v.0.1 for x8!?
Try reinstall your stock android from SE do full wipe, clean dalvik cache, than root your phone again, but after rooting your phone restart it and check it. Than start xrecovery do full wipe and clean dalvik cache and try to install ginger again......let us know what you have solved
Sent from my E15i using XDA App
dsaklein said:
I dont know really what it can be, but maybe you got wrong xrecovery you should install v.0.1 for x8!?
Try reinstall your stock android from SE do full wipe, clean dalvik cache, than root your phone again, but after rooting your phone restart it and check it. Than start xrecovery do full wipe and clean dalvik cache and try to install ginger again......let us know what you have solved
Sent from my E15i using XDA App
Click to expand...
Click to collapse
i have xrecovery v.0.1 and tried to do that but thanks anyway
it seems that my phone is idk but i guess there is some thing wrong with it
and if anyone have a solution please let me know
Are you really giving the phone enough time to boot? The first boot always takes a bit of time..
Also, format your sd card and install gdx only with the zip file in it then try to boot without the sd card.
Sent from my E15i using XDA App
Nikkopt said:
Are you really giving the phone enough time to boot? The first boot always takes a bit of time..
Also, format your sd card and install gdx only with the zip file in it then try to boot without the sd card.
Sent from my E15i using XDA App
Click to expand...
Click to collapse
it didn't work and i waited 30 minutes for it to boot
i tried multiboot and it worked as an external rom but so slow and lags a lot
but it didnt work as an internal rom so whats wrong ?
anyone has an idea about what i might've done wrong ?
Maybe you should send an PM to daoxian( im sorry if i wrote it wrong) and ask him for his opinion about it
Sent from my E15i using XDA App
ok thanks i will
well sorry for being a pain in the @$$ but i installed gingerxperia v5 ( v6 and v7 didnt work) and its a good rom but when io try to install apps it says either application not installed or free up some space and try again later ? tried full wipe
Try to install GingerCrutz 7.4 you need xrecovery for it, because its also awesome rom, to me its even better and faster then DX
Sent from my E15i using XDA App
dsaklein said:
Try to install GingerCrutz 7.4 you need xrecovery for it, because its also awesome rom, to me its even better and faster then DX
Sent from my E15i using XDA App
Click to expand...
Click to collapse
tried it and it didnt work well gc 7.3 worked but it sucks
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Just do it like always.
Sent from my XPERIA using XDA Premium.
You mean restore from recovery???
Sent from my E15i using XDA
lyhengboy said:
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Click to expand...
Click to collapse
Here is what you have to do.
If you still have your MiniCM6 backup, restore it using a recovery. Full wipe, wipe cache and dalvik cache then power off your phone. Then, use Flashtool to flash back stock kernel.
If you do not have the backup, download MiniCM6, boot into recovery, full wipe, wipe cache nd dalvik cache, then flash MiniCM6. Power off and use Flashtool to flash stock kernel.
Done (hopefully)
Next time post in Q&A section.
Sent from my E15i using Tapatalk 2
What do u exactly using now and what do u exactly want to flash?
Which kernel are u using?
Sent from my XPERIA using XDA Premium.
And u better post in q&a next time and use search button plzzzzz.
Sent from my XPERIA using XDA Premium.
lyhengboy said:
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Click to expand...
Click to collapse
So you want MiniCM 6 2.2.1 back ? Am I right ? And currently you are on GingerDx ?
I think he means minicm7
Sent from my XPERIA using XDA Premium.
SpyderX said:
Here is what you have to do.
If you still have your MiniCM6 backup, restore it using a recovery. Full wipe, wipe cache and dalvik cache then power off your phone. Then, use Flashtool to flash back stock kernel.
If you do not have the backup, download MiniCM6, boot into recovery, full wipe, wipe cache nd dalvik cache, then flash MiniCM6. Power off and use Flashtool to flash stock kernel.
Done (hopefully)
Next time post in Q&A section.
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
I already told it at first
Sent from my XPERIA using XDA Premium.
I don't know. I think the question should be more clear
I'm sorry for that, I don't know and don't understand about flash tool or flash kernel..I'm really don't understand, I try to find answer and still don't know...could you explain me? Why do we do??
Sent from my E15i using XDA
First tell me which rom do you want to flash ?
We do the flashtool stuff if we want to install a kernel or sometimes rom.. But you can install rom through recovery also.
Look we use flashtool to:
1-flash new kernels
2-install recovery on stock kernel.
3-rooting the phone
4- unlocking the bootloader (last version)
5-installing apps.
6-creating bundles if we want to restore Eclair
----------//-------
To flash a new ROM:
if your bootloader is unlocked u flash a new kernel and then using recovery u flash the Zip file which is the ROM.
If u cannot unlock your bootloader then u cannot change your kernel and must use ROMS which support stock kernel.
----/////-----------
Sent from my XPERIA using XDA Premium.
Well he can use xrecovery if unlocking bootloader is not possible (?)
Did I tell anything wrong?
Yes he should use Xrecovery to flash new ROMs.
But he can't change the kernel or the phone will be bricked (softly)
Sent from my XPERIA using XDA Premium.
Oh yes..Lets see if he can unlock his BL or not
You didn't say anything wrong
If u don't know about flashtool this means that you are in stock kernel....
Two ways
First if you had made a backup with cwm you can restore it with cwm,that will replace the current rom with the one you had backed up
second,if you haven't made backup then install your old rom just as you installed it first time,put it in SD,go to cwm or xrecovery ,full wipe,wipe dalvik, install zip from SD....
Sent from my X8 using xda premium
stamatis16 said:
If u don't know about flashtool this means that you are in stock kernel....
Two ways
First if you had made a backup with cwm you can restore it with cwm,that will replace the current rom with the one you had backed up
second,if you haven't made backup then install your old rom just as you installed it first time,put it in SD,go to cwm or xrecovery ,full wipe,wipe dalvik, install zip from SD....
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Maybe he never tried to unlock bootloader...and that's the reason he doesn't know anything about flashtool
Sent from my XPERIA using XDA Premium.
faraz_fireboy said:
Maybe he never tried to unlock bootloader...and that's the reason he doesn't know anything about flashtool
Sent from my XPERIA using XDA Premium.
Click to expand...
Click to collapse
Yes,what did I tell?!
If he is on stock kernel there is no need to tell him how to flash kernels......
Sent from my X8 using xda premium
I mean if he can unlock his bootloader he can flash kernels.
And I say maybe the reason his bootloader is unlocked is that he never tried to unlock it since he is a noooooob.
Sent from my XPERIA using XDA Premium.
Dear friends,
I always stuck at SE logo whenever I try to install custom rom. Here is what I do:
1. Root My stock 2.1 with Flashtool
2. Install Busybox with flash tool
3. Copy xrecovery's 3 files to system/bin
4. Restart in xrecovery and Choose Install custom zip
5. After installation, I reboot and stuck!!!
I have tried "MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip"
Any Help?? I dont want to unlock my bootloader.
Thnx
"MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip" uses custom kernel.must on unlockbootloader
use gingerdx v29 for stuck
sent from my x8™ using gingerDX®
Did you do a full wipe?
Skickat från min ST18i via Tapatalk 2
Find some help here ... don't use xrecovery, cwm is better ... and use gingerDX stock... my recommendation
http://forum.xda-developers.com/showthread.php?t=1932560
CWM recovery needs bootloader to be unlocked??
Jahanzaib Irfan said:
CWM recovery needs bootloader to be unlocked??
Click to expand...
Click to collapse
No,its like xrecovery
So,use cwm,full wipe before installing and check(at the about phone) your baseband,it should be like this, xxx15,if its not, update it with pccompanion or flashtool
Sent from my X8 using xda premium
Thnx to all, you made my day Guyzz... Blessings!!!
Jahanzaib Irfan said:
Thnx to all, you made my day Guyzz... Blessings!!!
Click to expand...
Click to collapse
goodluck.and be sure to use a custom rom for stock kernel.
sent from my x8™ using gingerDX®
playjun said:
goodluck.and be sure to use a custom rom for stuck.
sent from my x8™ using gingerDX®
Click to expand...
Click to collapse
Its not "for stuck",its "for stock (kernel)"
Sent from my X8 using xda premium
thanks for correction
sent from my x8™ using gingerDX®
One more thing friendz, after installing GingerDX for stock, i am unable to overclock my phone from cyanogenmod settings. Min and Max values are just faded and i cant change them. Any Solution?
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Steven87 said:
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Click to expand...
Click to collapse
No, how to do this?? is there any risk of hard brick?
No just find the baseband file and flash it on flashtool
Sent from my X8 using xda app-developers app
i recommend to you to start from scratch, 2.1, root, flash baseband, install busybox, install CWM recovery, the full wipe and flash rom, you can flash the baseband with flashtool, and i think there is no risk, i have done it several times, the baseband xxxx15 is required to flash custom roms.
Jahanzaib Irfan said:
No, how to do this?? is there any risk of hard brick?
Click to expand...
Click to collapse
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
stamatis16 said:
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Why cant I overclock??
Jahanzaib Irfan said:
Why cant I overclock??
Click to expand...
Click to collapse
Did you flash the overclock module? If yes,use setcpu or similar apps to change frequency
I don't recommend overclock,but if you want it that much...its your phone after all...
Sent from my X8 using xda premium
Btw when you get all of that done you can do these steps to have better battery life
http://forum.xda-developers.com/showthread.php?p=19938469#post19938469
http://forum.xda-developers.com/showthread.php?t=942241
You stuck on Sony ...... logo because all new ROMS need to be installed from CWM and not from xRecovery :laugh:
i cannot install zencefil rom on my sony ericsson w8
i tried installing it on stock kernel with xrecovery and cwm also....
everytime it gets stuck at "installing update"....
so someone please help
btw i am using gdx v30 right now....
w8 walkman said:
i cannot install zencefil rom on my sony ericsson w8
i tried installing it on stock kernel with xrecovery and cwm also....
everytime it gets stuck at "installing update"....
so someone please help
btw i am using gdx v30 right now....
Click to expand...
Click to collapse
Do you full wipe/factory reset before installation?
Sent From My BEAST , I mean X8
jay-z-s said:
Do you full wipe/factory reset before installation?
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
yes....
i also tried to update gdx to v30 but when i reboot after installation it gets stuck on sony ericsson logo screen.......
w8 walkman said:
yes....
i also tried to update gdx to v30 but when i reboot after installation it gets stuck on sony ericsson logo screen.......
Click to expand...
Click to collapse
Flash the stock kernel version
Gogeta said:
Flash the stock kernel version
Click to expand...
Click to collapse
i flashed the stock one....
w8 walkman said:
yes....
i also tried to update gdx to v30 but when i reboot after installation it gets stuck on sony ericsson logo screen.......
Click to expand...
Click to collapse
Explain all steps so we can findout
Sent From My BEAST , I mean X8
jay-z-s said:
Explain all steps so we can findout
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
1. Factory reset
2. wipe cache
3. Install custom zip
4. selected zip
but it gets stucked at installing update........
Redownload the rom
And just to clear this up,you need cwm and not xrecovery.
You said you tried to install gingerdx v30 and you got stuck at Sony logo, are you on stock now?
don't panic..
just wait for a while and see whether the installation completes...
same thing happens while formatting sd-ext partition, the recovery seems like it's stuck but finally it completes after some time..
so just wait for a little while during installation and then report back again..
stamatis said:
Redownload the rom
And just to clear this up,you need cwm and not xrecovery.
You said you tried to install gingerdx v30 and you got stuck at Sony logo, are you on stock now?
Click to expand...
Click to collapse
Ok I will redownload it and now I am back on gdx v29
dagger said:
don't panic..
just wait for a while and see whether the installation completes...
same thing happens while formatting sd-ext partition, the recovery seems like it's stuck but finally it completes after some time..
so just wait for a little while during installation and then report back again..
Click to expand...
Click to collapse
After getting stuck at "installing updates" it skips all the steps and shows installation complete...but it doesn't
w8 walkman said:
After getting stuck at "installing updates" it skips all the steps and shows installation complete...but it doesn't
Click to expand...
Click to collapse
Try this method
mount system from recovery (mount & storage )
Then install ROM
May help, don't forget to report
I'm not responsible for bricks
Sent From My BEAST , I mean X8
i download the zencefill here http://forum.xda-developers.com/showthread.php?t=1898413
7: ZenceFil V8 (HallA) For Stock Kernel + Stock Modules For Performance
Installation/ If You not using ZenceFil Latest Rom
1.- Download to ZenceFil Latest Rom
2.- Full Wipe,Cache and Format
3.- Flash a:ZenceFil Latest Rom
5.- Reboot and Enjoy!
im using it now
archie12345 said:
i download the zencefill here http://forum.xda-developers.com/showthread.php?t=1898413
7: ZenceFil V8 (HallA) For Stock Kernel + Stock Modules For Performance
Installation/ If You not using ZenceFil Latest Rom
1.- Download to ZenceFil Latest Rom
2.- Full Wipe,Cache and Format
3.- Flash a:ZenceFil Latest Rom
5.- Reboot and Enjoy!
im using it now
Click to expand...
Click to collapse
can you post some screenshots of v8
jay-z-s said:
Try this method
mount system from recovery (mount & storage )
Then install ROM
May help, don't forget to report
I'm not responsible for bricks
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
nothing happened
w8 walkman said:
nothing happened
Click to expand...
Click to collapse
Did u redownloaded your rom?
Sent from my X8 using xda app-developers app
stamatis said:
Redownload the rom
And just to clear this up,you need cwm and not xrecovery.
You said you tried to install gingerdx v30 and you got stuck at Sony logo, are you on stock now?
Click to expand...
Click to collapse
redownload didn't help
w8 walkman said:
redownload didn't help
Click to expand...
Click to collapse
Why don't you ask in the rom thread??
Devs might help u
Sent from my X8 using xda app-developers app
ok
Gogeta said:
Why don't you ask in the rom thread??
Devs might help u
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
no one is replying in that thread.....:crying:
Hi guys. Today I tried upgrading GingerDX from v030 to v031b but I mistakenly downloaded (and flashed) Alfs/nAa instead of Stock kernel.
Now the phone screen won't pass the Sony Ericsson boot scree... I can't find the key combinations to enter into CWM recovery menu. Is there any other way I can flash the proper ROM using Flashtool? I found this guide but I don't want to go back to the stock kernel (if possible).
Thank you!
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Gogeta said:
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Click to expand...
Click to collapse
Right, I already have the stock kernel, but I flashed Alfs/nAa ROM instead of the Stock one (from the download options) and now the phone won't pass the bootloader... Will try that guide since I can't enter CWM recovery using the key combinations I found
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
stamatis said:
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
He already stated that link in OP
see boot animation without rebooting
Gogeta said:
He already stated that link in OP
see boot animation without rebooting
Click to expand...
Click to collapse
Oops,my mistake, I didn't notice there were a link.
Ok, looks like there's no other way than going back to stock :crying:
Thanks anyway guys!
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Mistev said:
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Yes,its not harder isn't it? really easy and fast way. you do this couple of times and you automatically capture the method easily
i unbricked my soft brick X8,root and install Xrec without guide for 4 times.that nice
sorry for my baddest english.
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
vazquezjm said:
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Gogeta said:
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Where can I downloadCWM? I couldn't find it and that's why I used xrecovery
Sent from my Galaxy Nexus using xda app-developers app
Will xtoolbox do the job?
It I'll be great if everything comes from one place instead of having to root using guide A, install CWM from guide B to end up using XDA's guide to install GDX. Just un idea, specially for noobs
Sent from my Galaxy Nexus using xda app-developers app
X8 toolbox gives almost everything
Sent from my E15i using xda app-developers app
Well, when I softbricked my X8, I never used my PC to unbrick it. I will just go into the recovery and flash a working rom. Problem solved..
But I can't figure out why he is sayig he can't go into the recovery. The button patterns remains the same no matter what rom you are on or what kernel you use. But I can be wrong.
Anyway did you do all these steps:
# Wipe Full System
# Wipe Cache, Dalvik-Cache
These steps are very important. But we often forget them.
Dude.....
Sometimes can't get into recovery while on stock kernel
Happened 3 times to me
Sent from my X8 using xda app-developers app
Maybe the op is downloading gdx for custom kernel...
dagger said:
Maybe the op is downloading gdx for custom kernel...
Click to expand...
Click to collapse
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
We dont see the sony ericsson logo on custom kernels..
it is seen only on stock kernel.
so there is a high possibility that op downloaded the wrong rom..
Gogeta said:
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
if you use rom for stock kernel you can see the GDX logo...that is part of boot animation. alfs shows WLAN version not GDX. the Sony Ericsson logo is of stock kernel. so if you flash a rom for custom kernel you will still see that logo
it is possible (as dagger said) that OP downloaded rom for custom kernel.