Related
hi
for those like me who have tried the official Stock rom and have the screen lag and want a good fully functioning 2.3.4 GB official ROM u can take it from the below link
i got mine udated via the spice service center in india bangalore and i was having the screen lag problem and the battery too was draining fast
then i tried this one and every thing is working fine as i like it and the battery also seems to be much better
if u want it take it from the below link and enjoy
link for the same : http://www.mediafire.com/?28bhxqedlru2ii1 - it is - FB0-318D-0-512-A03
take both 318D & india off GB 318E here link : Sorry this link gone as my sugarsync is permanently deactivated
can ay one give me one more link ill add it here
Latest version is 1.8.2 download at http://www.mediafire.com/?cugomknzg3svfhf - Thanks c_anuraag
it has been renamed as firmware.nb0,if not extract to ur pc rename it place it on the root of ur SD flash it via official recovery Only
You cant use CWM for this
HOW TO FLASH THE ROM
* Extract the ZIP file.
* Copy the file FB0-318D-0-5019-A03.nb0 to ur PC and rename it to firmware.nb0
* Copy the firmware.nb0 to the root of ur SD
* To enter bootloader mode, press and hold volume up + down + power buttons until you see the image of the Android
logo.
* Press 'Home' key to show the update utility. Use the volume buttons to select the option "Download nb0 from SD card".
* Press 'back arrow' to confirm.
Upgrade will start. You can see the progress of the update while you wait. Your Phone is now updated to its latest software.
Pay close attention
haree said:
i dont think u can use CWM for this
Click to expand...
Click to collapse
yeah this should only be used if you have this specific device with this being said MOD: mikey I need you to get me a "bible" setup so people dont flash their phones to cdma from gsm and vice versa
.nb0 only use them if you have that exact model and service provider
.zip im working on getting these set up so we can run 2.2 or 2.3.4 whenever we want
just need a little help and someone else has cm7 building for the moto triumph which is the same hardware except the radio
snakebitezz said:
yeah this should only be used if you have this specific device with this being said MOD: mikey I need you to get me a "bible" setup so people dont flash their phones to cdma from gsm and vice versa
.nb0 only use them if you have that exact model and service provider
.zip im working on getting these set up so we can run 2.2 or 2.3.4 whenever we want
just need a little help and someone else has cm7 building for the moto triumph which is the same hardware except the radio
Click to expand...
Click to collapse
prof tj_style working on that (cm7 for this phone) soon it will be released the main problem faced is the fm issue,....
haree said:
hi
for those like me who have tried the official Stock rom and have the screen lag and want a good fully functioning 2.3.4 GB official ROM u can take it from the below link
i got mine udated via the spice service center in india bangalore and i was having the screen lag problem and the battery too was draining fast
then i tried this one and every thing is working fine as i like it and the battery also seems to be much better
if u want it take it from the below link and enjoy
Link : http://dl.dropbox.com/u/10031257/Mi410/Mi410GB13D.rar it is - FB0-318D-0-512-A03
Link 2 this one is India update which u can get done from the service center : http://dl.dropbox.com/u/10031257/Mi410
/OffupdateGB.rar
recent welcome ROM : https://www.sugarsync.com/share/ddhcyiw66cyqt
it has been renamed as firmware.nb0 so u can just flash it via ur official recovery
i dont think u can use CWM for this
Click to expand...
Click to collapse
In the very first link you provided, the camera JUST doesn't work. Any tips?
frankmehta said:
In the very first link you provided, the camera JUST doesn't work. Any tips?
Click to expand...
Click to collapse
just factury reast your phone then it should work. working for me
Sent from my CSL-MI410 using xda premium
yashwantsingh said:
just factury reast your phone then it should work. working for me
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
hi
yes ur right thats exactly what needs to be done it also worked for me
Didn't work for me. Now on Cherry Magnum HD Update 3. Smooth and very responsive. Everything works!
Stay off from CSL Spice 2.3.4 FB0-318D-0-5012-A03
I own a spice Mi-410. The A03 update seems to have greatly improved battery life (just over 3 days with limited calls, occasional fruit ninja, and data always on in 2G mode)
I started suffering from wake up lag issues on the official spice Gingerbread update FB0-318D-0-5012-A03 all of a sudden. An additional problem is that bluetooth support is very limited to receiving files on the stock Spice GB rom.
Since I had a good experience with the stock Cherry Magnum GB ROM A01 version (except for the lower battery life), I tried the more recent version (update 3) which is also an A03 release. I feel this is the best stock GB ROM currently for the Spice Mi-410. Of course removing some unnecessary bloatware also helps. For example I really do not see the need for nero sync. Also restored back the splash image and bootup animation/sounds from the Spice ROM. Having no issues for the last few weeks.
anandjm said:
I own a spice Mi-410. The A03 update seems to have greatly improved battery life (just over 3 days with limited calls, occasional fruit ninja, and data always on in 2G mode)
I started suffering from wake up lag issues on the official spice Gingerbread update FB0-318D-0-5012-A03 all of a sudden. An additional problem is that bluetooth support is very limited to receiving files on the stock Spice GB rom.
Since I had a good experience with the stock Cherry Magnum GB ROM A01 version (except for the lower battery life), I tried the more recent version (update 3) which is also an A03 release. I feel this is the best stock GB ROM currently for the Spice Mi-410. Of course removing some unnecessary bloatware also helps. For example I really do not see the need for nero sync. Also restored back the splash image and bootup animation/sounds from the Spice ROM. Having no issues for the last few weeks.
Click to expand...
Click to collapse
hi
ur statements are quite confusing 318B is the official India update and this has the screen lag
now are u saying that 318D as given in this thread is good or bad
i feel it is ok and better after rooting and removing the bloatware im getting a decent battery life
It can upgrade spice mi 270 to android 2.3.4
Sent from my Spice Mi-270 using xda premium
[email protected] said:
It can upgrade spice mi 270 to android 2.3.4
Sent from my Spice Mi-270 using xda premium
Click to expand...
Click to collapse
hi
assuming u are asking if u can use this for Mi270 no this is only for the Mi 410
u can ask at the service center or may be Google the same for ur phone
dont use this it will brick ur phone
Hello
u know how to install clockworkmod on spice mi 270.
Sent from my Spice Mi-270 using xda premium
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse
hi
but when i tried to install this via stock recovery it did not work any reason why
and yes i did rename the file to firmware.nb0
haree said:
hi
but when i tried to install this via stock recovery it did not work any reason why
and yes i did rename the file to firmware.nb0
Click to expand...
Click to collapse
IIRC I used SUT to flash that ROM
Sorry for the confusing statements. The A03 update is pretty good, but I had three issues with it.
1. Limited bluetooth support (try sending files from your phone with bluetooth). Have to use a third party app to deal with this problem.
2. GPS is quite poor. Takes a long time to get a lock.
3. Camera color balance does not work well.
4. Missing Android Gingerbread keyboard. In my opinion touchpal keyboard though better than the Froyo keyboard is not as good as the GB keyboard.
The A01 update which I tried caused issues with the wakeup lag but atleast had a working GPS and proper color balance.
For the reasons listed above I prefer the Cherry MagnumHD FB0-318D-0-5019-A03 ROM to the Spice FB0-318D-0-5012-A03 ROM.
haree said:
hi
ur statements are quite confusing 318B is the official India update and this has the screen lag
now are u saying that 318D as given in this thread is good or bad
i feel it is ok and better after rooting and removing the bloatware im getting a decent battery life
Click to expand...
Click to collapse
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
Not sure what you mean by weak GPS signal and touch screen axis inversion. I get a GPS lock (outdoors) within 30s most of the time and within 60s all the time, with AGPS.
ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse
yeah, with A-GPS it sure is very fast... it is supposed to
I was talking about the vanilla offline GPS, slow & painful as hell 99% of the time
The vanilla offline GPS can take as much as 10-15minutes before it gets a GPS lock and this I mean outdoors. This is especially true if the GPS is offline for sometime as it has to download the ephemeris data again. For more information you can read http://en.wikipedia.org/wiki/GPS_signals.
Since Ideos X6 variants all use the Quacomm Snapdragon 8255 SoC there should be no difference in the performance of the system compared to say the HTC Desire HD or Desire-S. Any issues (and I have not found any GPS issues with the Desire-S which I tested for two weeks and neither found any with the Spice Mi-410) is likely to be firmware related. I did have GPS issues with the Spice Mi-410 GB A03 firmware which was very stable otherwise.
So likely a firmware issue.
You can also try the GPS Test app from the android market https://market.android.com/details?id=com.chartcross.gpstest&hl=en
ashy said:
yeah, with A-GPS it sure is very fast... it is supposed to
I was talking about the vanilla offline GPS, slow & painful as hell 99% of the time
Click to expand...
Click to collapse
sucessfully flashed welcome A99 today
ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse
hi
today i flashed this Rom but did not use the SUTL
i changed the extension to firmware.nb0 and flashed it via stock recovery
and it was sucessfull this one seems to be good it does not seem to have any bloteware i also rooted and will try a few days and keep u posted on the same
@ ashy
thanks for this info
all i want is a good 2.3.4 with good battery and no screen crazy problem lets hope this one is it
MI410 Cancer with CHerry A03
Hi,
I have upgraded to Cherry Magnum HD A01, and it was all fine.
Upgraded to A03 (update 3), Battery Life has increased, and Touch felt as good, all was great till last week. Thats when issues started.
Problems:
1) Very slow response on trying to unlock screen
2) Very slow performance
3) Lag in ringtone (As if there are scratches while running a CD)
4) Call answers after 5 seconds
5) ....... Overall runs as if its struggling to survive with Cancer.
I Tried:
1) Cleared Cache (Helped for an hour)
2) Factory Rest (Helped for a day)
3) Reinstalled Firmware Removed Google Account running with new Google Account (Helping so far, aint sure when it start stuggling with Cancer again)
4)Tried to flash with Spice CSL A03 (dint work)
Any help in this regards will help many ambitious impatient users of MI410 like me who rushed to flash by re branding.
Hi all
I am just getting a head of myself here but I am wondering if I can learn before I start flashing my LG O2X.
I am in Australia and I am wondering which firmware (full stock) is most preferred at the moment?
I read in the firmware sections and it seems as if the not all stock firmware are very stable (Some people are complaining that it sucks out of the juice badly).
so any suggestions (links will help heaps) is much appreciated.
any link to good tutorial to flash the firmware is also greatly appreciated.
Thanks
sorry for the newbie questions
http://forum.xda-developers.com/showthread.php?t=1037751
Sent from my Optimus 2X using xda premium
Firmware stock
ardabelati said:
Hi all
I am just getting a head of myself here but I am wondering if I can learn before I start flashing my LG O2X.
I am in Australia and I am wondering which firmware (full stock) is most preferred at the moment?
I read in the firmware sections and it seems as if the not all stock firmware are very stable (Some people are complaining that it sucks out of the juice badly).
so any suggestions (links will help heaps) is much appreciated.
any link to good tutorial to flash the firmware is also greatly appreciated.
Thanks
sorry for the newbie questions
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1035041
Cheers guys!
I am still confused with all this term of base band and firmware used for LG o2x.
On my Samsung if i want to update my stock firmware i just need to go to samfirware download the latest one . Open ODIN as the flashing application, put the downloaded firmware package and press start.
Is this the same process in LG?
Do i need to root first? Where can I download the latest firmware package for LG?
Thanks again guys
Sent from my GT-I9100 using xda premium
Hello!
This depends...
If you only want the latest firmware provided by LG - just use the LG Update tool, follow its instructions and click start - wait a few minutes and voila.
Only working with an unbranded phone of course - in case of a branded phone you might have to wait for the OTA from your provider.
But you might have to wait at least another 6 Month for the next update from LG - last Update by LG(in Nov.) was to Android 2.3.4 and still has some bugs - ICS(Android 4.0) is in the making but...
If you want root, a custom rom(I would say CM7 is a lot better than stock rom - my opinion) with all the latest updates(i.e. Android 2.3.7 may be an ICS-build for X-mas ) and/or an OC/UV kernel it is a little more complicated.
Thanks for the prompt reply.
So... it sounds like the CM7 has won lots of hearts.
If I want to update mine (stock unbranded), which tutorial should I use?
since I am completely new to LG, any step by step (from the beginning) tutorial will help greatly.
I am after total stability and good battery - I am only using camera/video recording, playing videos, musics, skype/fring/viber and also some small games like angry birds etc.. good GPS lock is a bonus.
So any recommendation is greatly appreciated
Thank you
Medizinmann said:
Hello!
This depends...
If you only want the latest firmware provided by LG - just use the LG Update tool, follow its instructions and click start - wait a few minutes and voila.
Only working with an unbranded phone of course - in case of a branded phone you might have to wait for the OTA from your provider.
But you might have to wait at least another 6 Month for the next update from LG - last Update by LG(in Nov.) was to Android 2.3.4 and still has some bugs - ICS(Android 4.0) is in the making but...
If you want root, a custom rom(I would say CM7 is a lot better than stock rom - my opinion) with all the latest updates(i.e. Android 2.3.7 may be an ICS-build for X-mas ) and/or an OC/UV kernel it is a little more complicated.
Click to expand...
Click to collapse
ardabelati said:
Thanks for the prompt reply.
So... it sounds like the CM7 has won lots of hearts.
If I want to update mine (stock unbranded), which tutorial should I use?
since I am completely new to LG, any step by step (from the beginning) tutorial will help greatly.
Click to expand...
Click to collapse
Frist things First - backup all you date before you start because the phone RAM/ROM will be wiped!
If your phone comes with Froyo (Android 2.2.2) you could go right ahead and start after the ***-line
...if your phone comes already with GB (Android 2.3.4 – look under setting on the about page!) you need to smartflash a CM7-compatible baseband (i.e. 0725 for Froyo or 0823 as I use it).
Guide to flash baseband – only needed if your phone some with GB(Android 2.3.4)
http://forum.xda-developers.com/showthread.php?t=1008070
A German guide with downloadlinks…
http://www.handy-faq.de/forum/lg_op...-lg_optimus_speed_p990_aktuelle_baseband.html
If you try the newest baseband on this page (0823 – 23.08.11) you must flash all 4 files in descending order of filesize – the others are single files which are easier to use.
***************************************************************************
The easiest way would be to root the phone with SuperOneClick.
http://www.xda-developers.com/android/superoneclick-updated-to-2-2-now-features-zergrush-exploit/
…and then use Clockworkmod (http://forum.xda-developers.com/showthread.php?t=1098745) or Rom Manager to flash the latest KANG, since there aren’t any up to date Nightly’s because the CM7-build bot server is broken.
A Guide is in the Wiki pages for the LG P990…
http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Full_Update_Guide#Method_via_ROM_Manager
You could use either one of these KANGs…
Rusty:
http://fitsnugly.euroskank.com/gigglebread/p990/
temasek:
http://www.mediafire.com/temasek
koboltzz:
http://www.4shared.com/folder/9Y9RYzQA/_online.html
Don’t forget to flash the latest gapps for GB 2.3.7 (right now AFAIK version from14th Dez.)– you can find them on temaseks-mediafire account.
Just place KANG-Files and Gapps on your SD card before you enter boot recovery.
At the end you need GetRIL or LG RIL versions from the market to update you RIL because the preinstalled baseband of you new phone is almost probably 0725 and CM7 comes always with 0218 – just download GET RIL and hit the install button…
Now you should be good to go.
If you are even more adventurers you could look into the ironkrnL for more performance/powersaving – see my sig. and/or look in the ironkrnL-Thread at xda and flash an ironkrnL after the gapps.
ardabelati said:
I am after total stability and good battery - I am only using camera/video recording, playing videos, musics, skype/fring/viber and also some small games like angry birds etc.. good GPS lock is a bonus.
Click to expand...
Click to collapse
So “only” about everything one could do with a Smartphone…
Latest ironkrnL-builds with 00 or 32 ramhack should do it(stability and good battery) - but you might need to set the ring delay between 3000-4000 in the build.prop found in /system (you need a root-capable filemanager/editor i.e. ES Datei Explorer (https://market.android.com/details?id=com.estrongs.android.pop or Rom Tool from the market). I had a problem with the preset delay of 225.
Hope that helped...
Hi,
I am from India and a newbie to Android world.
I have a LG stock ROM(optimus 2x p990 Gingerbread). The factory version of the ROM is LGP990AT-00-V20e-ESA-XXX-OCT-28-2011.
The baseband is 1035.21_20110725
After taking a backup of image of Stock ROM with CWM,I have installed Gueste 2x v3.6 Hybrid Revolution, with symbiosis kernel.I have found it to be stable with good GUI
I have observed a heavy battery drain, with RIL v10d(Europe)
I am planning to flash 218 baseband as suggested by stefan.
But before doing so, I want to clear my doubts and have few requests
1) what are the best settings for a good battery life? I am switching to 2g networks when not surfing/downloading.
I am also using lots of apps, for my kid, who uses my mobile for a hour or so.
2)In case I need to go to Stock LG ROM, where can I get the original baseband, as I do not find it it anywhere, so as to to restore the CWM backup.
3) Stefan- Your ROM is wonderful. I have got few requests.Can you please port the stock LG Messaging app, Contacts app & "Backup & Restore" app .
Thanks
I am also from India.
I am using 0725 Baseband with v20d(Asia) RIL.
I dont have any battery problems whatsoever on this baseband and RIL combo. I get a straight 1 and half day on moderate usage (Few call and texting, 2g browsing for an hour or so, some music listening)
Battery drain wont be always due to baseband. It may also depend on some of the Apps you use which run in background.
Check the battery usage from the settings and see which program is using most of your battery.
Press "THANKS" if this helped.
Use the search function instead of starting a new thread. Please close this one.
Thanks Shane582.
I am sure that the battery drain was due to wrong bb (725) and RIL(v10d Europe).
As I am unable to get the LGP990AT-00-V20e-ESA-XXX-OCT-28 version of KDZ, I had posted the mail here, hoping that some one may help me.
Anyway this is not required now.
Also since this was my first post, I couldn't thank Stefan for his superb ROM( Gueste 2x v3.6 Hybrid Revolution )
found at the link
http://forum.xda-developers.com/showthread.php?t=1464986
Also I do a search properly, hoping to find a solution. Hence till date for the past one month, I was able to flash CWM, 5 different ROMs and come to a satisfactory solution for the issues faced.
Excepting for some rookies, I found the forum quite helpful, for sorting out all kinds of problems
Thanks everyone.
how to unroot and restore
Hi,
I am from India and a newbie to Android world.
I have a LG stock ROM(optimus 2x p990 ) rooted and running on cm9 NOVA HD ICS i want to unroot and restore stock gingerbread, how to i do it ???
MY BACK IS NOT WORKING DONT KNOW HOW.
WAITING FOR SOLUTION ...
THANKS
FULL STOCK LG ICS roms V30A & V30B
This is for people that want stock experience with the possibility of root, busybox and init.d support, but don't want the blingbling or tweaks from a custom rom.
These are full stock roms, meaning it is still odexed.
Modifications are help tools and have no effect on the stability and performance compared to a OTA updated.
INSTALLATION
ICS unlocked bootloader required with ICS partition layout.
Custom recovery for ICS.
Full wipe if coming from a different rom.
Install with custom recovery.
It is best to use the V30.. baseband for this.
V30B and V30A are different, first thing I did this morning was check them again.
V30A got more code then V30B , this is probably because V30A needs to support a wider region with more providers.
The strange thing to me is that LG gave it the same Baseband number 1035.21_20121130.
So it is possible that depending on the region you live in V30B or V30A is better.
To be very clear the ril of V30A and V30B are 100% the same so it can't be that if you get better connection
Note:
These are full stock LG ICS roms with the following modifications.
-Root
(SU 3.1.3)
-BusyBox 1.20.2
(Busybox is installed as primary and not default toolbox)
-Init.d support (Ramdisk modded for this)
For people that want to use scripts, like V6Supercharger or any other that needs init.d.
Folder is already present in "system/etc"
-Data mounted in EXT4 like the rest of the system.
(Ramdisk modded for this)
Click to expand...
Click to collapse
V30A
(CWM installation)
-Build date: Nov-30-2012
-EU region (open)
-Build for the following countries:
Albania, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech, Denmark, Finland, Former Yugoslav Republic of Macedonia, France, France Caraibes, France Reunion, Germany, Greece, Greenland, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Montenegro, Netherland, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Swiss, UK
V30B
(CWM installation)
-Build date: Dec-18-2012
-ESA region (open)
-Build for the following countries:
Algeria,Angola,Bahrain,Iran,Ghana,D.R. Congo,Iraq,Israel,Ivory coast,Jordan,Kenya,Kuwait,Lebanon,Nigeria,Oman,Palestine,Qatar,Saudi,Senegal,SouthAfrica,Syria,Tunisia,Turkey,UAE,India.
-Side info , these roms are fully based on the stock KDZ files that I extracted and pulled the full system from it and turned it into a cwm flashable package.
I used spyrosk Toolkit for it and kitchen with .img extraction tool. This way I got a clean boot.img and system dump .img that I then turned into a system build folder.
The same way I build my custom roms
-Every one that wants can use these roms as a base for a custom rom that they want to build.
Click to expand...
Click to collapse
I will add any new LG stock release in the future , so if you got a stock LG KDZ file just link it for me.
---------------------------------------------------------------------------------------------------------------------
V30-TOOLBOX
Install with CWM
V30STOCK-LG-APP-WIPER
(see attachments for download)
Aroma wiper with the following options:
"Delete OTA update app,
(This app is only installed in V30A)
"Delete OnScreenPhone"
"Delete LG pc sync tool"
"Delete LG Cellbroadcast"
"Delete LG Remote Call service"
V30STOCK-SU660-EXTRA_WIDGETS
(see attachments for download)
Aroma installer with the following options:
"ApplicationManagerWidget"
"CalendarWidget"
"MusicWidget"
"PowerWidget"
:good:Thanks buddy ... Very Good Job:good:!
Thanks
Enviado desde mi O2X
thanks for v30b, grateful for this...
Civato or some Dev here make one for the old bootloader? Tks
ToolBox
Added in OP=
V30-TOOLBOX
Install with CWM
V30STOCK-LG-APP-WIPER
Aroma wiper with the following options:
"Delete OTA update app, Only available on V30A"
"Delete OnScreenPhone"
"Delete LG pc sync tool"
"Delete LG Cellbroadcast"
"Delete LG Remote Call service"
V30STOCK-SU660-EXTRA_WIDGETS
Aroma installer with the following options:
"ApplicationManagerWidget"
"CalendarWidget"
"MusicWidget"
"PowerWidget"
And what do we click when a post was useful?
Hi, reporting here.
I had a bsod connecting the phone to USB when the screen was off.
World clock crashes.
I put a timer 1hour and after 30~ min the phone restarted itself.
Sent from my LG-P990 using xda premium
Thanks for you hard work and about the list of language with V30b it as shown like the attachment picture so I can use Thai too
Hi everybody, I have a question for u.
I really confuse to install it. Im stock rooted 2.3.4-V20s
Baseband is 1035.21_20120521
I wanna upgrade my phone to V30b, However how can I do it? What should I do first?
k101d said:
Thanks for you hard work and about the list of language with V30b it as shown like the attachment picture so I can use Thai too
Click to expand...
Click to collapse
Both 30A and 30B are distributed multilanguage even each of them has a different region distribution.
Thai language is already included in 30B, the same of Italian used by me.
Civato, maybe you should explain in your first post that region does not mean multilanguage options.
Sent from my LG-P990 using xda app-developers app
mesutziya said:
Hi everybody, I have a question for u.
I really confuse to install it. Im stock rooted 2.3.4-V20s
Baseband is 1035.21_20120521
I wanna upgrade my phone to V30b, However how can I do it? What should I do first?
Click to expand...
Click to collapse
First,
you should read a lot my friend.....and get the AIOT....allinonetoolkit, download the baseband (if required)download the ROM....
but i would suggest you to read as it will help you understand this process well....which will help more than anyone else....
Please dont take it as an offense mate
SREEPRAJAY said:
First,
you should read a lot my friend.....and get the AIOT....allinonetoolkit, download the baseband (if required)download the ROM....
but i would suggest you to read as it will help you understand this process well....which will help more than anyone else....
Please dont take it as an offense mate
Click to expand...
Click to collapse
Thanks SREEPRAJAY.
I already have problem with allinonetoolkit, I know how to do it but I should upgrade baseband and also i should change partitions from old to new layout and after all I will use cwm to install this rom.
However I confused that which one should be first? Upgrade baseband or change partition.
the second one first mate
Then flash BB then ROM,
Hope it is ok
O2X with Magical ICS ROM and supersonic kernels from my buddies
Thanks Civato.
SREEPRAJAY said:
the second one first mate
Then flash BB then ROM,
Hope it is ok
O2X with Magical ICS ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
Really thanks buddy
How stable is this, my missus has the 2x and is constantly having problems she's been telling me today that she's already had to do a battery pull 4 times today because the instability.
All I need is a rom that's solid and stable and just works I don't care about fancy tweaks and speed just save me some ear ache Is this the rom to try?
Drefsab said:
How stable is this, my missus has the 2x and is constantly having problems she's been telling me today that she's already had to do a battery pull 4 times today because the instability.
All I need is a rom that's solid and stable and just works I don't care about fancy tweaks and speed just save me some ear ache Is this the rom to try?
Click to expand...
Click to collapse
This is full stock with no tweaks , only help tools like full root , init.d and busybox. These things have no effect on stability.
If you got problems with this you got a problem with your phone.
I've not flashed this rom I've used others and others have not been stable hence why I was asking how stable this one actually is, is the stock good enough to be used as a daily driver? After all LG have not been known for their bug free stock roms in the past I mean no offence to the quality of your work just wondering how good LG's latest version is.
Drefsab said:
I've not flashed this rom I've used others and others have not been stable hence why I was asking how stable this one actually is, is the stock good enough to be used as a daily driver? After all LG have not been known for their bug free stock roms in the past I mean no offence to the quality of your work just wondering how good LG's latest version is.
Click to expand...
Click to collapse
well i have the same question can any one help
Sent from my LG-P500 using xda app-developers app
I've been using this on my partners phone for a while and I keep getting a very weird issue I've not seen on any other phone. Randomly when I wake the phone up the screen is flipped and the colours seams to be like a negative. If I press power to blank the screen the power again its all fine.
Hi guys!I read this forum for a very long time but I really,really can't find exactly what I need.
So I got my first Android phone and it's Samsung Galaxy S-i9000.Now I really know more about android phones and RAM and CPU for Android phones.However,now I think the better choise is Galaxy S 2 because of 1 GB RAM,it's faster and it has flash for camera(But I don't really need flash ).
The problem is RAM and I really like games like Subway Surfers,Temple Run,Ski Challenge,Real Racing.
I own Samsung Galaxy S GT-i9000 2 months and when i bought phone,firmware was Gingerbread 2.3.3.It was smooth and fast,but I had a battery drain problem.After charging and playing games,Android OS was draining my battery,so I had to reboot my phone after every charging and playing game.I searched a solution and i found that draining battery is bug of firmware 2.3.3.So I updated it via Kies to 2.3.4 XXJVQ and draining was still there but less than with 2.3.3.I didn't know what to do,so I searched forums and found that I should update to original Gingerbread 2.3.6 JVU.I bricked my phone,because Odin stuck at setup connection.There was just image of phone-!-computer when I booted.I was able to go to download mode and I immediately took my phone to repair service.Repairman installed to me 2.3.6 JVU and it is bit slower,slower for some games.I am sad.I don't know what to do.It is only 320 MB available.
-What should I do?
-I think I should take my phone to repairman and say him to install new firmware but I don't know which firmware.Can you tell me please?I want fast firmware without bugs and battery drain and I really want to play games like Subway Surfers and Temple run without lags like I used to play wit Gingerbread 2.3.3 and 2.3.4.
-Is there simple solution to change firmware?
-Why did I bricked phone last time when I tryed to update it.Is it because I maybe don't have USB 2.0 port.
Please reply.
P.S. I don't really like Custom ROMS because I think they are slow and unsafe.
Sorry for bad English
nemanja96 said:
-Why did I bricked phone last time when I tryed to update it.Is it because I maybe don't have USB 2.0 port.
Please reply..... P.S. I don't really like Custom ROMS because I think they are slow and unsafe.
Click to expand...
Click to collapse
You should better use USB 2.0 to update the firmware, Samsung USB driver must be installed and Kies process killed by the Task Manager (it loves to work in the background and can block flashing via Odin)
BTW, if you have used incompatible Odin version for your i9000 that also could be a reason for soft brick.
I fail to understand your point, as custom ROMs are actually faster and less laggy (especially when BigMem enabled: 407MB of RAM)
But for gaming is probably recent GB firmware a better choice. So all after JVT are fine, maybe JW7 would be best for you, it was released for Portugal and you can download it from sammobile.com
If not sure about something, check my i9000 guide
tetakpatak said:
You should better use USB 2.0 to update the firmware, Samsung USB driver must be installed and Kies process killed by the Task Manager (it loves to work in the background and can block flashing via Odin)
BTW, if you have used incompatible Odin version for your i9000 that also could be a reason for soft brick.
I fail to understand your point, as custom ROMs are actually faster and less laggy (especially when BigMem enabled: 407MB of RAM)
But for gaming is probably recent GB firmware a better choice. So all after JVT are fine, maybe JW7 would be best for you, it was released for Portugal and you can download it from sammobile.com
If not sure about something, check my i9000 guide
Click to expand...
Click to collapse
I am sure that I closed all Kies proccesses,and I used Odin 1.85 which is compatible with my phone,so I think the problem is USB port.That computer was old.Do you think it is because of old computer?
Wait,it is based on Android 4.x and my phone has to be rooted.I realy don't want to root my phone,and this Gingerbread JVU 2.3.6 (currently on my phone) is value pack too and it is slow.Very less RAM available.Is it about Kernel maybe.My kernel is [email protected] #2. Can I change and how?My phone is not rooted.Thanks!
nemanja96 said:
Wait,it is based on Android 4.x and my phone has to be rooted.I realy don't want to root my phone,and this Gingerbread JVU 2.3.6 (currently on my phone) is value pack and it is slow.Very less RAM available.Is it about Kernel maybe.My kernel is [email protected] #2. Can I change and how?My phone is not rooted.Thanks!
Click to expand...
Click to collapse
I don't understand why wouldn't you root the phone....
Root would give you so much more options. Stock ROMs are full of bloatware that slowes the phone incredibly down.
With root access to your firmware you could uninstall all useless Samsung apps and it would boost the speed of your i9000.
Flashing a Semaphore_2.5.0bm.tar kernel would grant you full root access, CWM recovery and you could enable 409MB of memory on your phone, what isn't imaginable now (on costs of 720p video playback that wouldn't be possible anymore)
tetakpatak said:
I don't understand why wouldn't you root the phone....
Root would give you so much more options. Stock ROMs are full of bloatware that slowes the phone incredibly down.
With root access to your firmware you could uninstall all useless Samsung apps and it would boost the speed of your i9000.
Flashing a Semaphore_2.5.0bm.tar kernel would grant you full root access, CWM recovery and you could enable 409MB of memory on your phone, what isn't imaginable now (on costs of 720p video playback that wouldn't be possible anymore)
Click to expand...
Click to collapse
Because I want to took phone to service and tell them to install me new rom,beacuse I'm scared after first brick.And I think they won't root my phone and install custom roms.That's the reason I want Official Stock Firmware for GT-i9000 which is fast for games.I just want to tell them which firmware I want.And I am so confused about kernels.I don't even know should my phone be rooted to change kernel...
So,please if you know some fast Official Stock Firmware without bugs and lag,tell me. :highfive:
nemanja96 said:
Because I want to took phone to service and tell them to install me new rom,beacuse I'm scared after first brick.And I think they won't root my phone and install custom roms.That's the reason I want Official Stock Firmware for GT-i9000 which is fast for games.I just want to tell them which firmware I want.And I am so confused about kernels.I don't even know should my phone be rooted to change kernel...
So,please if you know some fast Official Stock Firmware without bugs and lag,tell me. :highfive:
Click to expand...
Click to collapse
OK, I understand.
So, the latest one is JW9, not many people know it as it came very late and only for very few countries. But I remember people were saying it was awsome. Try Portugal one and if CSC works in your country stick with it (screenshot attached)
If no, this one will ceirtanly work (as it has multi-CSC) is this JW4 release:
Code:
United Kingdom / Ireland: 2012 April GB 2.3.6 I9000XXJW4 csc: I9000OXAJW5
I know that one, quite smooth, not very fast (compared to JB or KK roms) but stable and with excellent battery life. Best you can do is to download both, check that the zips aren't corrupted (download error) and give them both into your service and tell the guys to try first if JW9 works in your country. It should, actually.
Good luck and let know later if you like them
tetakpatak said:
OK, I understand.
So, the latest one is JW9, not many people know it as it came very late and only for very few countries. But I remember people were saying it was awsome. Try Portugal one and if CSC works in your country stick with it (screenshot attached)
If no, this one will ceirtanly work (as it has multi-CSC) is this JW4 release:
Code:
United Kingdom / Ireland: 2012 April GB 2.3.6 I9000XXJW4 csc: I9000OXAJW5
I know that one, quite smooth, not very fast (compared to JB or KK roms) but stable and with excellent battery life. Best you can do is to download both, check that the zips aren't corrupted (download error) and give them both into your service and tell the guys to try first if JW9 works in your country. It should, actually.
Good luck and let know later if you like them
Click to expand...
Click to collapse
Allright,I think I'm will download just JW4.I googled,but there are many opinions.
Have you tried it yet?Tell me is it fast for games.That's most importan to me.
Also,people say it has 364 MB avaiable,BUT i'm little suspicious.Some peole say that 200-220 MB RAM is already unavailable when you turn on your phone.Is that true?I'm sorry if I'm boring but I really want to know all these answers before I took my phone to service.
THANK YOU FOR ALL YOUR HELP.
nemanja96 said:
Allright,I think I'm will download just JW4.I googled,but there are many opinions.
Have you tried it yet?Tell me is it fast for games.That's most importan to me.
Click to expand...
Click to collapse
BTW, you know, I got so curious about the JW9 as I really didn't know it and I've just flashed JW9 today and: I must say I am bit shocked how good it is! It is far the best gingerbread I ever tried, incredibly fast and smooth., much better than the CM7.x (2.3.7)!!
Some peole say that 200-220 MB RAM is already unavailable when you turn on your phone.Is that true?
Click to expand...
Click to collapse
Unfortunatelly, yes.
Also,people say it has 364 MB avaiable,BUT i'm little suspicious.I'm sorry if I'm boring but I really want to know all these answers before I took my phone to service.
THANK YOU FOR ALL YOUR HELP.
Click to expand...
Click to collapse
No problem mate
Yes, it is all together 364 available as part of 500MB is fixed (reserved) for some system functions.... actually, with only 500MB capacity, the RAM of the i9000 is already around 60% full / used before you start any app or game.
Go for JW9, it is amazing! It is obviously better, faster and smoother than the JW4.
It will be no problem about signal I think, basebands in Europa are so similar.
I just showed it my wife and she wants that I install it for her instead of the CM11...... she prefers GB's layout and design..... Oh, yes: it just flies with SpeedMod kernel k-17-3.... but it is also very fast with its stock kernel
tetakpatak said:
BTW, you know, I got so curious about the JW9 as I really didn't know it and I've just flashed JW9 today and: I must say I am bit shocked how good it is! It is far the best gingerbread I ever tried, incredibly fast and smooth., much better than the CM7.x (2.3.7)!!
Unfortunatelly, yes.
No problem mate
Yes, it is all together 364 available as part of 500MB is fixed (reserved) for some system functions.... actually, with only 500MB capacity, the RAM of the i9000 is already around 60% full / used before you start any app or game.
Go for JW9, it is amazing! It is obviously better, faster and smoother than the JW4.
It will be no problem about signal I think, basebands in Europa are so similar.
I just showed it my wife and she wants that I install it for her instead of the CM11...... she prefers GB's layout and design..... Oh, yes: it just flies with SpeedMod kernel k-17-3.... but it is also very fast with its stock kernel
Click to expand...
Click to collapse
I changed my mind.Then,I will probably tell them to install JW9.I don't care does it include my language,but I just need english language.Is english avaiable in JW9.After 1-2 days using tell me,please,is that good firmware.I just wanna know some basics:
-Is battery good? (I gotta admit that battery on 2.3.6 JVU (now on my phone) is very good,no Android OS bugs,but performance is bad)
-How much RAM is avaiable and how much is unaviable when you turn on phone?
-Is Temple Run lag?
-Is that Value Pack? (I hate to lose RAM on that kind of firmware,I don't even like new features,I really don't care )
If I finally make my phone stable and fast,you're the best!
nemanja96 said:
I changed my mind.Then,I will probably tell them to install JW9.I don't care does it include my language,but I just need english language.Is english avaiable in JW9.After 1-2 days using tell me,please,is that good firmware.I just wanna know some basics:
-Is battery good? (I gotta admit that battery on 2.3.6 JVU (now on my phone) is very good,no Android OS bugs,but performance is bad)
-How much RAM is avaiable and how much is unaviable when you turn on phone?
-Is Temple Run lag?
-Is that Value Pack? (I hate to lose RAM on that kind of firmware,I don't even like new features,I really don't care )
If I finally make my phone stable and fast,you're the best!
Click to expand...
Click to collapse
LOL, it is not about language pack, but Baseband / Radio- frequences for mobile networks that can vary in different regions of the world
Comparation: I know JVU well from before, IMHO, the JW9 is better in all terms. Faster, smoother, great.
It also looks much nicer, I've attached you few screenshots, I only couldn't make it fast enough to open the drawer before screen was printed (releasing of back+home button makes a shot, but also exits from laucher drawer)... it is my cat as wallpaper
My wife has liked so much the JW9 that she asked me to de-install her CM11 and flash JW9 on her i9000 today!
By no apps running, I had 42% RAM free, what is very good for the i9000
But you will also need some day root access, if nothing else just to uninstall Samsung's bloat apps that you'll never need and they slow your phone down. With root apps, one can hibernate many processes and
tetakpatak said:
LOL, it is not about language pack, but Baseband / Radio- frequences for mobile networks that can vary in different regions of the world
Comparation: I know JVU well from before, IMHO, the JW9 is better in all terms. Faster, smoother, great.
It also looks much nicer, I've attached you few screenshots, I only couldn't make it fast enough to open the drawer before screen was printed (releasing of back+home button makes a shot, but also exits from laucher drawer)... it is my cat as wallpaper
My wife has liked so much the JW9 that she asked me to de-install her CM11 and flash JW9 on her i9000 today!
By no apps running, I had 42% RAM free, what is very good for the i9000
But you will also need some day root access, if nothing else just to uninstall Samsung's bloat apps that you'll never need and they slow your phone down. With root apps, one can hibernate many processes and
Click to expand...
Click to collapse
I still don't get it about Baseband/Radio freq.Can you explain me.
How much MB is avaiable.On jvu is 320,and on JW9?
nemanja96 said:
I still don't get it about Baseband/Radio freq.Can you explain me.
How much MB is avaiable.On jvu is 320,and on JW9?
Click to expand...
Click to collapse
Don't worry about baseband. It will work with your country's network. The guys in service will take care of it.
I will check later about RAM, but it will probably be about the same like with JVU.
I know you need more memory, that is why I suggested you to flash a custom kernel, Semaphore enables up to 384,5 MB on stock GB roms and up to 409 MB with KK roms.
Read here: http://78.46.194.137/changelog/gb-version
Download link JW9
Hi,
I've checked the firmware for Portugal from sammobile.com and it is totally bloated with stuff for some portugese provider.
Here you have a clean- non-branded XWJW9 firmware for your i9000, best Gingerbread I ever tried:
I9000XWJW9_I9000OXAJW4_I9000XWJW1 download link
It has open Europe-CSC so it will ceirtanly work also in your country. If your language keyboard is missing, just install free app MultiLingual Keyboard
So, good luck and lots of fun- happy New Year with your new i9000
tetakpatak said:
Hi,
I've checked the firmware for Portugal from sammobile.com and it is totally bloated with stuff for some portugese provider.
Here you have a clean- non-branded XWJW9 firmware for your i9000, best Gingerbread I ever tried:
I9000XWJW9_I9000OXAJW4_I9000XWJW1 download link
It has open Europe-CSC so it will ceirtanly work also in your country. If your language keyboard is missing, just install free app MultiLingual Keyboard
So, good luck and lots of fun- happy New Year with your new i9000
Click to expand...
Click to collapse
Thanks! Happy New Year!
Can I flash either the Portugese or German XWJW9 firmware on my SGS? The one I'm currently on right now is the XXJW4 UK/IRELAND with multi-csc. Wifi signal is weak but when the phone is right beside the router, the wifi signal fluctuates.
I'm in the Philippines by the way. I'm a bit worried that the baseband and CSC for the XWJW9 won't work in my country.
Thanks.
peachmangupay said:
Can I flash either the Portugese or German XWJW9 firmware on my SGS? The one I'm currently on right now is the XXJW4 UK/IRELAND with multi-csc. Wifi signal is weak but when the phone is right beside the router, the wifi signal fluctuates.
I'm in the Philippines by the way. I'm a bit worried that the baseband and CSC for the XWJW9 won't work in my country.
Thanks.
Click to expand...
Click to collapse
Yes, JW9 will work. If the baseband isn't working, you can replace the modem later with any root file browser. Sometimes changing the region in the Wi-Fi settings can really help. You should try. Maybe no need for JW9.
tetakpatalked from Nexus 7 flo