Database Develop

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

[Q] Optimal overclock for Samsung Galaxy S i9000

I'm currently running stock kernel and stock rom on a rooted Samsung Galaxy S i9000 (GT-i9000). The Android version is 2.3.3. and i wish to overclock it as much as possible, to define this I would like to say "as much as possible where i gain a measurable result without any waste".
So i recently overclocked the phone with Tegraks app Overclocking Ultimate, thanks for the app!
My current settings are set to 1.3 Ghz with an output of 1.305 V with an internal voltage of 1100mV. The Io sheduler is cfg and governor performance with scaling-min: 800mhz and max: 1.3 Ghz.
The test results are:
AnTuTu Benchmark 1000 Mhz
RAM: 326
CPU-Int: 596
CPU-float: 153
2D: 275
3D: 1058
Database IO: 250
SD write: 2.8MB/s
SD Read: 9.3MB/s
CPU: 1000 Mhz
Total score: 2779
AnTuTu Benchmark 1300 Mhz
RAM: 442
CPU-Int: 781
CPU-float: 200
2D: 278
3D: 1141
Database IO: 380
SD write: 4.2MB/s
SD Read: 11.9MB/s
CPU: 1300 Mhz
Total score: 3383
Is this really the maximum performance to receive of the device without modifying the kernel or rom?

My SGS
Hi,
in my SGS, it looks like this:
ROM: Slim-3.1.0-OFFICIAL (Android 4.1.2)
Kernel: Devil3_1.9.5_Jelly_Helly_i9000_CFS_BLN_VC .
In this Kernel, I was able tweak processor to 1484 MHz. Using Devil Kernel Config, I set the frequency to 1400 MHz. Then, I set LiveOC value to 106, still got max frequency of 1484 MHz. RAM Settings is "Big Mem 403 MB" (movies in HD work), ZRAM Size is 150 MB and Swappiness is disable. Deep Idle and Deep Idle Stats is enabled. I set I/O Scheduler to "sio" and CPU Governor to "smartassV2". AnTuTu Benchmark v3.0.3 results look like this:
RAM: 813
CPU-Int: 989
CPU-float: 238
2D: 387
3D: 1582
Database IO: 545
SD Write: 6.2MB/s (internal SD)
SD Read: 9.1MB/s (internal SD)
CPU: 1484 MHz
Total score: 4707
So the answer to your question ... I do not think you get a better result without modifying the kernel and ROM change. I got, but not on the stock ROM and Kernel.

If you're happy with your stock rom I'd leave it, unless there's something you really need to OC for.
My phone gets pretty hot playing games with just 111% Live OC, are you doing this for the scores? Or is there some game that lags?
Sent from my GT-I9000 using xda premium

I have installed CM10.1 and overclocked it to 1.2Ghz.
Antutu is always close to 4200.

lifehijack said:
I have installed CM10.1 and overclocked it to 1.2Ghz.
Antutu is always close to 4200.
Click to expand...
Click to collapse
Hello, with which kernel?

kaarburo said:
Hello, with which kernel?
Click to expand...
Click to collapse
Stock. running cm10.1 12th jan nightly. Ran the benchmark, the score was around 4200. Cant post screenshot at the moment. Will post it later.

update
You should update to cm10. It relly felt like a new phone when i updated from stock to cm9.1. I had the same version as you 2.3.3 and it sux.

1200 for me, best Antutu benchmark(5000+ no games, ~4400 with games) while not risking to brick my phone.

calindu221 said:
1200 for me, best Antutu benchmark(5000+ no games, ~4400 with games) while not risking to brick my phone.
Click to expand...
Click to collapse
If you're still on gb try glitch kernel. I once reached 4200 in the old version of antutu with 1.6ghz overclock while the stock kernel gave around 2900. 1.5ghz was stable for me.

AW: [Q] Optimal overclock for Samsung Galaxy S i9000
I got 4700 points on antutu with just 114% live OC.
Rom: SlimBean 3.1
Kernel: Semaphore
Sent from my GT-I9000 using xda app-developers app

HI everyone i just overclocked my i9000 to 1.2 ghz
and results was just amazing
before oc i got overall score with antutu =4815
after oc = 5470
i had serious lag with subway surf and its gone after oc
i am on CM10.0.0
kernel: [email protected]

[Q] overclock gpu to 400 mhz

hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french

up

pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.

pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
The only one I know of that allows GPU over clocking and voltage control is Thor kernel. Not found on xda as the creator is persona non grata. Google it.
I use the app Voltage Control to specify frequency and voltage settings, very useful. Give it a try.
Sent from my GT-N7000 using xda premium

eug3n91 said:
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
Click to expand...
Click to collapse
He is saying GPU not CPU thus the 400Mhz.
I use Tegrak to oc the GPU with Franco kernel.
Sent from my GT-N7000 using XDA

Yeah use tegrak overclock but m using Abyss kernel nd my phone is buttery smooth

thanks shaolin95 but i don't find franco kernel for gingerbread, the only i found is for ics, can you give me a link please
edit: i've installed abyss kernel + bought tegrak kernel ultimate and it works ! thanks for your answer

i wanted to ask does overclocking the gpu help alot in games like more 10 fps ? and does it shorter the gpu's life ?
thanks alot

[Q] Min. CPU speed won't go down to 100MHz

Current ROM: [ROM][4.0.4] RemICS v1.2 (Team Remics) [17.06.2012]
The min. CPU speed won't go down to less than 200MHz, this problem have occoured to me in other ROMS also.
Using other apps than the internal ROM CPU controll does not work.
Have anyone else solved this problem?
I see now that both 100MHz and 200MHz is 950 mV, maybe this something to do with my problem?

Are you using stock kernel or any other?

Using the kernel provided in the Remics' rom, used the kernel cleaning script before install.
The kernel is NMICS. That's what I found out in the Remics thread

Well, I can only recommend u to try some other kernels eg. devil, semaphore, glitch...

This is not a problem.. in mnics and semaphore the min cpu is 200 mhz when gpu active... but it goes to 100 mhz when gpu inactive.... use application cpu spy for more details
Sent from my GT-I9000 using XDA

Gpu active - screen on
Gpu inactive - screen off
Sent from my GT-I9000 using XDA

ok, thanks, good to know

overclock cpu higher of 710 MHz

when i used the prime hd 8 in stock i can overclock that in hgher of 710MHz.
but now i use the gingerdx 28b and install the overclock module and setcpu app few days ago and i can't higher of 710 MHz overclocked.
why i can't ?

pooyatavan said:
when i used the prime hd 8 in stock i can overclock that in hgher of 710MHz.
but now i use the gingerdx 28b and install the overclock module and setcpu app few days ago and i can't higher of 710 MHz overclocked.
why i can't ?
Click to expand...
Click to collapse
Why make a new thread when you can post in PrimeHD thread???!

nazz.rule said:
Why make a new thread when you can post in PrimeHD thread???!
Click to expand...
Click to collapse
i asking about overclock cpu in gingerdx.
read the thread again

Search before posting. All other threads are now closed. Creating a thread for every small issue is not a solution.

It depends of your CPU. My cpu in MokeeOS 1.3 and nAa14 kernel is overclocking to 729 max. On 749 I've got a reboot.

wozzo34516 said:
It depends of your CPU. My cpu in MokeeOS 1.3 and nAa14 kernel is overclocking to 729 max. On 749 I've got a reboot.
Click to expand...
Click to collapse
I wear lewaOS overclock to 768MHZ and not having any problems and are going to make its performance be improved