Database Develop

[Q] Overclocking help :)

Hey guys i am currently using CM7 kittenlinux base (in fact autoradios cm7 light ics modded)
I just want to know which is a safe overclocking frequency for the mini. I plan to use 710hz but u guys tell me =)
Thank you.

Each phone have not same. ...not every phone stable in the same MHz like i am not stable in800MHz...but someone is stable..so try it by urself...and dont overclock too much...waste battery
Sent from my GT-S5570 using XDA

i always use 729-748 as max cpu frequency and the lowest frequency as min cpu frequency... as governor i use ondemand or lilgV2... for me works fine but you should find your own configuration because it depends from the use you mean to do with your device... for example if you use you phon for gaming so you need high freqency for lagless gaming experience but a governor and a shleuder that make long battery life... try by yourself xD

For maximum freq 710, for minimum freq 245 (less chance of hanging when waking device) and governor smartassv2. That's how I roll

AndroidUser99 said:
Each phone have not same. ...not every phone stable in the same MHz like i am not stable in800MHz...but someone is stable..so try it by urself...and dont overclock too much...waste battery
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Thnx everyone but how do i know that a particular frequency is stable on my phone ??

kirakun said:
Thnx everyone but how do i know that a particular frequency is stable on my phone ??
Click to expand...
Click to collapse
By putting phone in horizontal position, display facing south-west, and perfectly balanced lol but really, you'll notice how it performs, any fc's or hangs or random reboots are bad signs

[Q] Min CPU freq setting for low battery consumption?

Hi!
I've found this thread which explains in detail all Governor/Schedulers characteristics and much more.
Even if the thread is SGS2 based, there is one thing that catched my attention.
It is written that setting the min CPU frequency @ 100 Mhz actually takes more power during phone standby then the 200 Mhz setting because of cpu voltages...
Does anybody has similare experiences with the Galaxy S i9000?
Which is the recommendable min CPU freq for the lowest battery consumption during Standby?
Thank you!

it depend on devices n true voltage lacking when cpu standby, but its dualcore vs single core
Sent from my GT-I9000 using xda premium

An this mean what for device i9000 ???
compacity said:
it depend on devices n true voltage lacking when cpu standby, but its dualcore vs single core
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse

Nope, doesnt mean anything mate, juz info, actually u need to test it urself. as for me, locking min cpu doesnt solve battery drain in smartphone.
Sent from my GT-I9000 using xda premium

Okay sorry for my stupid question ...
i have min cpu by 100mhz ...and for me it is okay...
Sure and if you have apps which let the cpu not going to standby , it doesn`t take effect ...
What min cpu do yu have? Only for information ...
compacity said:
Nope, doesnt mean anything mate, juz info, actually u need to test it urself. as for me, locking min cpu doesnt solve battery drain in smartphone.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse

freakymod2120 said:
Okay sorry for my stupid question ...
i have min cpu by 100mhz ...and for me it is okay...
Sure and if you have apps which let the cpu not going to standby , it doesn`t take effect ...
What min cpu do yu have? Only for information ...
Click to expand...
Click to collapse
mine dont lock mincpu, as i let da gov do it, mincpu goes to any value cpu needed.but literally 100 was default. but i use script tweak on init.d to shut all background app/lagfree/sdread ahead/ n auto taskmanager to manage free RAM. So feel free to use any combo u feel battery saving as i m waiting tony stark to create a nuclearbased battery for smartfone
n no kidding mate, discussion on saving battery already been solved as not recommended topic, so try to find any setting that pleases u.
or maybe u can try slimbase ROM
Sent from my GT-I9000 using xda premium

200MHz is the best minimum CPU frequency for both performance and battery consumption for most cases. Leave your minimum at 200MHz.

What govenor do you use???
Kingo64 said:
200MHz is the best minimum CPU frequency for both performance and battery consumption for most cases. Leave your minimum at 200MHz.
Click to expand...
Click to collapse

freakymod2120 said:
What govenor do you use???
Click to expand...
Click to collapse
Ondemand. I also use SIO as a scheduler but cannot really feel any difference between it and other IO schedulers.

whats the difference between ondemand and interactive ...???
it is a little bit off-topic but what are the differences between the differnt I/O-Scheduler ...(actually i`m using row ...)
Thx
Kingo64 said:
Ondemand. I also use SIO as a scheduler but cannot really feel any difference between it and other IO schedulers.
Click to expand...
Click to collapse

freakymod2120 said:
whats the difference between ondemand and interactive ...???
it is a little bit off-topic but what are the differences between the differnt I/O-Scheduler ...(actually i`m using row ...)
Thx
Click to expand...
Click to collapse
Sorry, i didn't want to press thanks ;PP
Let google be your friend. You will get great overviews. (There is as example a overview for governors - i thonk it was for SGS2 - but it is partly right on every phone)
i'm sorry i didnt remember the URL ;DD

[Q] How do I overclock my phone?

Hello people! I just succeded with rooting my LG Optimus 4X HD :victory: And the reason I did that was to increase the performance on my phone, but I couldn't find any good apps for that. I want suggestions about apps that can overclock EVERY CORE and not just a single one, please respond as soon as possible

AbdulTheInsane said:
Hello people! I just succeded with rooting my LG Optimus 4X HD :victory: And the reason I did that was to increase the performance on my phone, but I couldn't find any good apps for that. I want suggestions about apps that can overclock EVERY CORE and not just a single one, please respond as soon as possible
Click to expand...
Click to collapse
have u done any overclocking in your whole life ? ...
you cant overclock from settings only one core. to overclock only one core u have to do a surgery to the cpu chip........
u cant overlock if the kernel does not support it. stock rom limit is 1500

kessaras said:
have u done any overclocking in your whole life ? ...
you cant overclock from settings only one core. to overclock only one core u have to do a surgery to the cpu chip........
u cant overlock if the kernel does not support it. stock rom limit is 1500
Click to expand...
Click to collapse
Dude I just rooted my phone like 2 days ago so don't excpect me to be a pro at these stuff xD (I am a noob) But you didn't really answer my question tho :s

First,You need to install a kernel that supports overclocking, and after that you can use app like trickstermod or tegra overclock. But i would strongly suggest you to read more about rom,kernel,recovery etc. before asking such questions.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

AbdulTheInsane said:
Dude I just rooted my phone like 2 days ago so don't excpect me to be a pro at these stuff xD (I am a noob) But you didn't really answer my question tho :s
Click to expand...
Click to collapse
the phone doesnt have to do anything with the procedure u can overclock anything. from just a coffee machine to a kitchen , from a pc to a phone !! if a cpu has more than one core, u cant just overclock only one of them. I answered i told u the limit of the stock rom and kernel is 1500. u cant overclock. u must have a custom kernel that can support overclocking.
that means u need to unlock bootloader and flash at least a custom kernel if not a whole rom.
<<EDIT>> and just for the knowledge ! take for example samsung s3. it has a lower cpu frequency but the phone is little faster than our optimus. overclocking isnt only about rising the frequency. u can also overclock by slightly giving more voltage and faster correspondence. u have to read a lot to understand how it works. for example a mistake can make u have a slow 1700 cpu but a fast 1200 cpu. read read read read

kessaras said:
the phone doesnt have to do anything with the procedure u can overclock anything. from just a coffee machine to a kitchen , from a pc to a phone !! if a cpu has more than one core, u cant just overclock only one of them. I answered i told u the limit of the stock rom and kernel is 1500. u cant overclock. u must have a custom kernel that can support overclocking.
that means u need to unlock bootloader and flash at least a custom kernel if not a whole rom.
<<EDIT>> and just for the knowledge ! take for example samsung s3. it has a lower cpu frequency but the phone is little faster than our optimus. overclocking isnt only about rising the frequency. u can also overclock by slightly giving more voltage and faster correspondence. u have to read a lot to understand how it works. for example a mistake can make u have a slow 1700 cpu but a fast 1200 cpu. read read read read
Click to expand...
Click to collapse
I get it now, but I think I asked the question in a wrong way so let me tell you again how I was ACTUALLY thinking. What I want is to enable EVERY single core and make them have 1.5 GHz speed. How can I do that?

AbdulTheInsane said:
I get it now, but I think I asked the question in a wrong way so let me tell you again how I was ACTUALLY thinking. What I want is to enable EVERY single core and make them have 1.5 GHz speed. How can I do that?
Click to expand...
Click to collapse
Buy tegra overclock from playstore.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

AbdulTheInsane said:
I get it now, but I think I asked the question in a wrong way so let me tell you again how I was ACTUALLY thinking. What I want is to enable EVERY single core and make them have 1.5 GHz speed. How can I do that?
Click to expand...
Click to collapse
set governor to performance, set cpuquiet to userspace. you need trickstermod app & custom kernel in order to tune this.

AbdulTheInsane said:
I get it now, but I think I asked the question in a wrong way so let me tell you again how I was ACTUALLY thinking. What I want is to enable EVERY single core and make them have 1.5 GHz speed. How can I do that?
Click to expand...
Click to collapse
And watch your battery drain in under an hour.

What have you been doing to actually have a point that you have thought a quad core 1.5ghz phone needs overclocking?
Sent from my Nexus 5 using Tapatalk

AbdulTheInsane said:
I get it now, but I think I asked the question in a wrong way so let me tell you again how I was ACTUALLY thinking. What I want is to enable EVERY single core and make them have 1.5 GHz speed. How can I do that?
Click to expand...
Click to collapse
your cores are already at 1500. to set a perfomance governor to make them run permanently at 1500 will cause u a huge battery drain and cpu overheat. when u will go play a game the heat will enable automatically the cpu to rest so u will have actually around 1000 mhz speed. the cpu HAS to rest. the phones dont have many big fans inside to cool the board and the cpu. thats why people prefer ondemand governor usually. the cpu rests until the 1st core go to 90% usage or more and then the other cores are enabled too. when the cpu usage go below 90% one core is working again and when there isnt any need for cpu usage , the core goes down to 102 mhz.

overclocking
before you get your phone overclocked you should but in consideration that you may break your phone..over heating .... battery consumption.. don't look for performance alone >> you cant get performance with out battery drain or over heating >> just thing before you do that

You should look at how often cores 3&4 are even active. It's very rarely on my Nexus
Sent from my Nexus 5 using Tapatalk

ah c'mon he cant destroy the phone even if he wanted to. its not like he has the knowledge to decompile the kernel , change the proccessor limit to over 1700 and recompile it. so his limit is 1700 of iodak and werewolf and mokee. the thing is to understand how overclock works. he will figure it out eventually.

kessaras said:
ah c'mon he cant destroy the phone even if he wanted to. its not like he has the knowledge to decompile the kernel , change the proccessor limit to over 1700 and recompile it. so his limit is 1700 of iodak and werewolf and mokee. the thing is to understand how overclock works. he will figure it out eventually.
Click to expand...
Click to collapse
LOL... How can we decomplie the kernel and recompile that?
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

Yeah, I think the max over clock for p880 only reach 1700. Or am I wrong?
Sent from my LG-P880 using Tapatalk 2

momo95 said:
Yeah, I think the max over clock for p880 only reach 1700. Or am I wrong?
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
for the developers that know what to do , max for our phone is 1700. originally the safe overclocking at any cpu since many many years , is around 20%. after that it needs cooler. the better the cooler the more u can overclock.

Hi, trickster show me that my phone don't use the 1700 MHz. Y?
Sent from my LG-P880 using xda app-developers app

Probably it is not overclocked.
The stock higher operating frequency of p880 is 1500 MHz, and that is what your trickster diagram is showing.
So. Either your phone is notoverclocked, or in whatever kernel you are using maximum frequency is set to 1500 MHz.
Inviato dal mio GT-P3110 usando XDA Premium HD app

Ehm, i have iodak v08 cm10.1.3 and cwm6.0.4.4
I'll check how to overclock the CPU.
May some one also look for a how-to if i don't find anything for overclocking my CPU
Thanks and kind regards
Edit;;;
I've found it. Can some one explain to me how to fit this things?
Sent from my LG-P880 using xda app-developers app

Decrease min CPU frequency???? SGS3 LTE

Guys,
I'am wondering if its possible to set min CPU to lower than 200Mhz????
I used to have a HTC Incredible S and lowering the min CPU to 133Mhz it helped with battery saving.
Using S3 LTE AMCHA v5.00

raulpcamara said:
Guys,
I'am wondering if its possible to set min CPU to lower than 200Mhz????
I used to have a HTC Incredible S and lowering the min CPU to 133Mhz it helped with battery saving.
Using S3 LTE AMCHA v5.00
Click to expand...
Click to collapse
Sorry no...

Smedslund said:
Sorry no...
Click to expand...
Click to collapse
I was afraid it was a hardware limitation.
Thanks anyway !!!
:good:

that 200 MHz or whatever value, is the sleep frequency right?

raulpcamara said:
Guys,
I'am wondering if its possible to set min CPU to lower than 200Mhz????
I used to have a HTC Incredible S and lowering the min CPU to 133Mhz it helped with battery saving.
Using S3 LTE AMCHA v5.00
Click to expand...
Click to collapse
Hi mate,
Have you tried playing with the CPU frequency settings located in:
/sys/devices/system/cpu/cpufreq/pegasusq/
You will need Root Access and to mount the System as read/write in order to save the changes.
They are also referenced in /init.rc, so you can probably change the settings in the Kernel too
Have a great day!
-Shaz

if this trick works you can set it to 1MHz....But the big question: will the phone work normally? i mean if i get a call phone will act as normal?

spiderman07 said:
that 200 MHz or whatever value, is the sleep frequency right?
Click to expand...
Click to collapse
No, in deep sleep the frequency is different. That's why a idling device wastes more battery than a deep sleep one.

How to do intense overclock??

Hi guys the trinity kernel has been famous for its ability for overclocking, but now i stuck a bit in getting the max freq provided by the kernel
The v3.1b is supposed to enable up to 2.7Ghz, but the max i can get is 2.265Ghz.
But I heard people could really do 2.7Ghz at some point.
p.s. in older version of this kernel i used to get 2.4 for max, while the max was 2.8Ghz back then.
I'm always confused in the way to get high freq actually running, could someone teach me??
(dont mind me posting here, i dont wanna annoy trinity so much becoz of my stupid problem)

KWOKSFUNG said:
Hi guys the trinity kernel has been famous for its ability for overclocking, but now i stuck a bit in getting the max freq provided by the kernel
The v3.1b is supposed to enable up to 2.7Ghz, but the max i can get is 2.265Ghz.
But I heard people could really do 2.7Ghz at some point.
p.s. in older version of this kernel i used to get 2.4 for max, while the max was 2.8Ghz back then.
I'm always confused in the way to get high freq actually running, could someone teach me??
(dont mind me posting here, i dont wanna annoy trinity so much becoz of my stupid problem)
Click to expand...
Click to collapse
just use Fuaxclock!!!

samadipoor2 said:
just use Fuaxclock!!!
Click to expand...
Click to collapse
Thanks it works ^^
I'm so happy bro seriously thanks ^^