Database Develop

Standard usb port adapter

Where is this at for the tab. Has anyone found it yet. I dont know if maybe froyo does not support the usb host mode needed or what. I saw that it was comming and yet cannot seem to find it. It was supposed to plug into the data port on the tab and give you the ability to attatch regular usb peripherals.
Any info is greatly appreciated
Sent from my SCH-I800 using Tapatalk

FWIW I saw a USB dock at Home Plus (Tesco for you guys in the UK) the other day for 29,000 KRW. Although I can't be sure, it appeared to be just a USB only dock but it looked like the HDMI dock recently reviewed on here.
Sent from my SHW-M180S using XDA App

I havnt seen it yet!
Sent from my GT-P1000 using XDA App

you should try out the Elan Mobidapter, it's a micro SD to USB adapter with integrated USB Host. i'm using the Mobidapter often and im happy with it, but you can only use USB Storages with it. No keyboard support.
BTW: Android itself doesn't have or support an USB Host.

3ph15t said:
BTW: Android itself doesn't have or support an USB Host.
Click to expand...
Click to collapse
That's not entirely true. Most android builds don't have the necessary usb host support as part of the kernel, but there's nothing to prevent someone from compiling it or adding it in as a module. The Tab is/was supposed to do this OOTB, and based on the pinout information posted elsewhere, there is at least kernel support for determining if host mode should be enabled. With a modified iPod connector from Sparkfun I was able to get the Tab's AccessoryManager process (I think that's what it was called) to see a non-supported device plugged in (externally-powered USB hard drive enclosure), even if it couldn't enumerate it. It could be because I didn't connect the requisite +5V for downstream devices, or because there is no usb_storage module available. More testing needs to be done on this before we write it off completely. Hopefully Samsung will just release their solution(s) sooner than later.

That is what I wish they would do. But im afraid with the tab10.1 it may be put on the back burner
Sent from my SCH-I800 using Tapatalk

How did you modify the ipod connector? I have a few ipod/iphone cables lying around but they seem backwards compared to the sgt connector and difficult to modify.
I'm thinking about buying some sgt connectors or cables from china to play with.
Sent from my GT-P1000 using XDA App

Unfortunately I could not find a supplier of the "mirrored" iPod connectors that the SGT uses. I contacted many China-based component mfgs and none could point me in the right direction for that stupid dock connector. So I got the iPod one from SparkFun, used an xacto knife and small file to grind off the material on either side of the connector that keys it into the mating iPod connector. This allows you to invert it and plug it into the SGT, which then gives you access to all 30 pins. The cheap charging/sync cables that you can get from ebay and the likes only come with 5-7 pins connected, and the rest missing.

3ph15t said:
you should try out the Elan Mobidapter, it's a micro SD to USB adapter with integrated USB Host. i'm using the Mobidapter often and im happy with it, but you can only use USB Storages with it. No keyboard support.
BTW: Android itself doesn't have or support an USB Host.
Click to expand...
Click to collapse
you know what sucks? I had a $100 haipad that had a microusb jack and came with a 6" adapter cable. guess what? you could plug in usb sticks, a usb mouse, or a usb keyboard. worked perfectly. mouse had a pointer, keyboard worked without a popup, it was all quite magical.
that was on a 2.1 resistive touchscreen chinese tablet.
why the hell can't the tab to this?

Looking for a cable that can usb otg/power at same time(Future Car install)

I have everything planed out for my tab install for my Dodge Magnum. But since the Nexus 7 doesnt have a sd slot I need to find a cable that can charge the tablet and use my flash drive at same time.
My flash drive(Usb on dash, so its easily removable)
http://www.amazon.com/gp/product/B00812F7O8/ref=ox_sc_act_title_4?ie=UTF8&smid=ATVPDKIKX0DER
Plugging this into the usb otg cable
http://www.amazon.com/Black-4-Port-...qid=1348442221&sr=8-3&keywords=4+port+usb+hub
I would love host cable with 2 usb inputs but cant seem to find it and dont know if its even possible.
Any help would be appreciated.

I found this on the bay : item # 140839631580 (Can't post link I'm too new... I was a lurker for a while -_-)

i didn't think the N7 could support power and OTG

You want it for video or audio? You could try a wifi solution for audio. Or be the guy that gets the pins to work.

there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...

I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?

Unfortunately OTG sends ground up the sense pin to trigger host mode. Once activated it sends 5V DOWN the USB cable to power your USB devices. Trying to send voltage up the cable at the same time to the Nexus would not be a good idea. The only way around it I can think of would be to hack the firmware to only activate the data pins in host mode and keep the power circuit seperate, then you could power the USB device from a modified dock/hub which sends power up the USB cable to the device.
A lot of work, and without the powered hub, OTG would be useless!

In the long run wouldn't it be easier to just plug in the power lead when needed and have the otg in the rest of the time? (or vice versa). It would mean you having to have easy access to the usb port but I can't see an easy non technical solution to connecting both at once.

Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.

earlyberd said:
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
Click to expand...
Click to collapse
Trying to sell tablet now. Going for galaxy tab 2
Sent from my SAMSUNG-SGH-I747 using xda premium

Wouldn't this work?
http://tobuygoods.com/product_info.php?language=en&currency=USD&products_id=131

I have galaxy tab 2 for sale. Pm me for details...

erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2

Rolandh said:
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same principle. In normal OTG host mode the tablet powers the peripherals. A USB keyboard/mouse will be no exception to that.

intruda119 said:
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Click to expand...
Click to collapse
Sorry to resurrect an old thread but was wondering if you ever ended up getting that Juiced systems adapter and if it worked well with the N7. Been looking at it but haven't found any success stories on XDA with the N7, just the few Amazon reviews...

That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app

sadde said:
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Why PM you, why not just put it up here, Anyway here you guys go
http://forum.xda-developers.com/showthread.php?t=1835720

I am interested in this kernel patch quite a bit. I have a galaxy note 2 (sprint version). What are the odds someone has figured out how to get power and otg working on the note 2?

erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Ofcourse there is charge and otg at the same time by just simply shorting pins 4 and 5 with a resistor,in my case for xperia p , a 100k resistor does it.

Timurs USB ROM from another site is what you want. Has links and everything you need.
I was going to do a car install as well but after sourceing parts and work estimates ( I want clean install, like stock) just more hassle than its worth for me. Please post pics if you get an install going.
Sent from my Nexus 7 using XDA Premium HD app

HD/HD+ usb host cable

Due to proprietary port used in Nook HD/HD+, standart usb host cable does not fit.
Did anybody seen anywhere Nook HD/HD+ port <-> Usb Female cable?
I need such cable to attach keyboard/flash/... to my Nook.

I'm looking for the same thing, no luck so far. Anyone find anything?
Sent from my HTC One X+ using xda app-developers app

its not looking hopeful but i'd also like an otg usb cable for the hd+. i want to hook it up to a DSLR,

There is a chance to have mode switching via software and use female to female adapter with stock usb cable

fanoush said:
There is a chance to have mode switching via software and use female to female adapter with stock usb cable
Click to expand...
Click to collapse
Is mode switching developed on a per hardware basis, or is there a general app that will work on the hd+? I think its per device . Guessing no one else has made any headway with OTG yet?

I'm sorry, I was wrong with previous post (deleted)
here's full info:
http://forum.xda-developers.com/showthread.php?t=2307585

Unable to get usb Nook Hd + to recognize any usb input
I downloaded the zip mentioned in the first post. Previously I was on a hybrid version from Android for Nook of 4.1.2
I have tried mounting with chainfire and nexus media importer but not seeing any drives. I have tried two different flash drives a mouse and a ps3 controller with powered usb hub. None of the devices have been detected.
I have gotten usb otg to work for a nexus 7 so I'm not a total noob. But far from expert as I can't get usb otg for my htc evo 4g lte.
Under settings it showing the custom rom that you linked here.
However I may have installed incorrectly as I can no longer get into Nook mode. Only Android mode seems to work now. Any help would be greatly appreciated.

Psionic22 said:
I downloaded the zip mentioned in the first post. Previously I was on a hybrid version from Android for Nook of 4.1.2
I have tried mounting with chainfire and nexus media importer but not seeing any drives. I have tried two different flash drives a mouse and a ps3 controller with powered usb hub. None of the devices have been detected.
I have gotten usb otg to work for a nexus 7 so I'm not a total noob. But far from expert as I can't get usb otg for my htc evo 4g lte.
Under settings it showing the custom rom that you linked here.
However I may have installed incorrectly as I can no longer get into Nook mode. Only Android mode seems to work now. Any help would be greatly appreciated.
Click to expand...
Click to collapse
If you installed the version linked in the referenced post above and it said ...emmc.zip in the name, you installed it to internal memory replacing the stock Nook HD+ OS.
Sent from my Galaxy Tab 2 using XDA Premium

USB 2.0 A Female to A Female Coupler Adapter
I use the adapter from Monoprice dot com > USB 2.0 A Female to A Female Coupler Adapter Product ID 362
tested it with a microsoft laser mouse usb

Layout
I have a few extra Nook HD/(+) cables and am thinking about doing some wiring. Anyone have a pin layout of the Nook HD plug, so I don't have to tear it apart? Or are they using standard USB wiring once it leaves their proprietary connector?

mashjet said:
I have a few extra Nook HD/(+) cables and am thinking about doing some wiring. Anyone have a pin layout of the Nook HD plug, so I don't have to tear it apart? Or are they using standard USB wiring once it leaves their proprietary connector?
Click to expand...
Click to collapse
i am not the most skilled in this area but i am also looking for documentation on the pinning. i am thinking if the whole connector is actually connecting (can use all pins) we can do a lot more than just otg this could allow powering of the tab and data at the same time, possibly with a custom rom and hardware permitting display out with power and data all at once. but thats being super hopeful haha

mromutt said:
i am not the most skilled in this area but i am also looking for documentation on the pinning. i am thinking if the whole connector is actually connecting (can use all pins) we can do a lot more than just otg this could allow powering of the tab and data at the same time, possibly with a custom rom and hardware permitting display out with power and data all at once. but thats being super hopeful haha
Click to expand...
Click to collapse
If you search, someone previously listed the pin-out.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
If you search, someone previously listed the pin-out.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
ah thank you for the heads up, i also read that someone found the hdmi pinning (probably took apart that hdmi adapter) as well but no pinout was shown :/ but hey that means were getting closer!

[Q] USB2 HDD and/or keyboard on KFHD7?

I know the KFHD7 can't power things plugged into the micro USB but assuming a USB hub or power from another source just having the data cable plug into it should work, right? I've tried a USB2 HDD and USB wireless mouse/keyboard and they don't work though, although they do on my Samsung Galaxy S3 using same apps to mount in case of the USB2 HDD.
If this is possible what am I missing to make it work?

zekepliskin said:
I know the KFHD7 can't power things plugged into the micro USB but assuming a USB hub or power from another source just having the data cable plug into it should work, right? I've tried a USB2 HDD and USB wireless mouse/keyboard and they don't work though, although they do on my Samsung Galaxy S3 using same apps to mount in case of the USB2 HDD.
If this is possible what am I missing to make it work?
Click to expand...
Click to collapse
i m going to explain you why you cant use them (i bought a keyboard) amazon disabled usb otg in the kernel. i said amazon to turn it on. i contacted them 2 times, and nothing. i think, we have to contact them to enable it (all forum users) or pay me 35 dollars for a bluetooth keyboard!
Sent from my KFTT using XDA Premium 4 mobile app

persano said:
i m going to explain you why you cant use them (i bought a keyboard) amazon disabled usb otg in the kernel. i said amazon to turn it on. i contacted them 2 times, and nothing. i think, we have to contact them to enable it (all forum users) or pay me 35 dollars for a bluetooth keyboard!
Sent from my KFTT using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Damn, lack of USB OTG support is a real shame, I was hoping to use the KFHD7 as a portable media centre/laptop replacement but it might be impossible by the sound of it.
One thing i forgot to mention is that my KFHD7 is modified with TWRP and CM 10.1, runs really smooth compared to the stock software. But is USB OTG stillnot possible like it was on the original Kindle Fire? Seeing as this newer one uses a second bootloader and all.

zekepliskin said:
Damn, lack of USB OTG support is a real shame, I was hoping to use the KFHD7 as a portable media centre/laptop replacement but it might be impossible by the sound of it.
One thing i forgot to mention is that my KFHD7 is modified with TWRP and CM 10.1, runs really smooth compared to the stock software. But is USB OTG stillnot possible like it was on the original Kindle Fire? Seeing as this newer one uses a second bootloader and all.
Click to expand...
Click to collapse
possible, but hashcode prefer to fix all bugs and then add it

Possible to hook multiple devices up via micro usb port?

Hello all. Planning to get a MHL 2.0 cable for my note 3 but I also want to hook up a keyboard and mouse. I have a logitech k/b that uses wireless signal via a USB dongle. I figured the OTG cable would suffice but naturally once the MHL cable is in, there is no way to also use the OTG cable. Curious if there is some sort of hub that allows at least 1x micro usb and 1x full size usb, or some sort of splitter? I realize a bluetooth keyboard and mouse is probably another solution but would prefer to avoid if I could.
Thanks!

In other words, you want to make your phone a desktop computer?

yeh basically. Easier to work while on my lunch break. Thanks

Yes.
I made a pretty ghetto setup but it works.
What you will need is an OTG cable
A stand
And a powered USB hub
Mine is home made, but I believe they have this options made into a dock for this phone.
Sent from my SM-N9005 using XDA Premium 4 mobile app

I was hoping to do the same thing. But through bluetooth. I have a bluetooth keyboard that connects but I just got a lenovo n700 bluetooth mouse but my phone wouldn't recognize it. :/
The mouse connected to my ipad though...
Sent from my SAMSUNG-SM-N900A using xda app-developers app

After my post I came across the Samsung Smart Dock, which looks to do what Im trying to accomplish. May invest in that, a little pricey though
As for the idea above, I still need to have a Micro USB for the MHL right? Or can I get an adapter to do USB to Micro USB to make it work?

You need an 11 pin adapter for MHL. Samsung and rocket fish sell the correct equipment.
Sent from my SM-N9005 using XDA Premium 4 mobile app