Database Develop

[Q] Bricked device caused by broken TWLauncher

G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?

LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....

Flash stock rom via Odin.
Sent from Miui powered SGS

or custom ROM more better and satisfying

azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing

did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?

Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck

It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.

@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?

Thanks for your help my sgs is working again the thread can be closed

You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!

bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy

Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.

bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.

[Q] I think I'm half bricked.. Help

Hello,
I own a I-897 Captivate model, and I had a custom 2.3.4 gignerbread rom recently..
Latley I tried to move to cognition becuase the other rom did problems for me..
So I followed the guide, and when I first flashed the kernel I wasn't using any pit file..
So it's just stuck on odin with nothing happening, so I closed odin and rebooted my phone.
Then the phone showed me a logo with phone and computer with X between them.
So I flashed again using the pit then I got to the recovery, where I tried to install the cognition 5.2 without succes, it finished the install, but when I rebooted it just kept switching between the boot screen of AT&T and Galaxy S GT I9000..
So I tried to use my Nandroid backup, but it just won't work, I tried to install it manually and still it isn't working..
So I tried to instal my previous rom and succeeded, but now when I reboot it it just loading the Talon logo, finishes it and stuck on the end of the loading without any action...
So, I can use the download mode and odin.
What should I do?
Thank you very much.

What build number is your phone
Sent from my I897 using XDA Premium App

Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.

Gibieyal said:
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Click to expand...
Click to collapse
Please I beg you to stop what you're doing and just Read, Read like your life depends on it and keep reading till you can flash with utter confidence least you permanently brick your Cappy.
Sent From My SGS Captivate 2.3.5 Biffmod

I have read tons of time,
I tried to install Cyanogenmod, but it seems when I get to the recovery it doesn't work..
I flashed the recovery through CWM, but its very limited and blue not bright green or yellow as always.
I only got 4 options:
Reboot
Re-Install packges
Wipe user data
Wipe cahce
How do I get my recovery work properly?

That's not CMW that's the regular 3e recovery. You'll need to flash a kernel with CMW built in or one with an alternate recovery (I usually use an Onix kernel)
Sent From My SGS Captivate 2.3.5

I've flashed a full gingerbread stock rom, with boot loaders and it works fine,
but now I can't get to the download mode, so I cant flash the rooted kernel..
I'm stucked unrooted, How can I root it?
It's Gingerbread 2.3.3 UCKF1 Build stock rom.

Pull out your battery, Sim, and SD card. Plug your usb cable into a usb port on the back of your computer then plug it into your phone. Hold volume up and down then reinsert your battery, should boot into download mode.
Sent From My SGS Captivate 2.3.5

[Q] Major issues with the i9000 right now. Please Help.

Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.

Well I just tested the SD card in another phone and it works fine. So it's definitely the software/rom I'm using now I think.
Is there anything I can do to make this work. Maybe like a completely stock 2.2.1, that is guaranteed to work haha? I just need this card to be read. Because even when I plug the phone and run Kies, Kies doesn't recognize the version of the firmware. And If I try to use superoneclick root, it also doesn't recognize the version of the firmware.
So right now I'm using 2.2.1 XWJSD, which stock rom should I install with odin or Heimdall to make this work?
Thanks a lot again.

Head over to this thread and download JVZ (Gingerbread 2.3.6), flash with Odin with re-partition checked, then head over to Chainfire's thread for CF-Root kernel for JVZ and flash that through Odin as well.
Forget about Kies since you'll no longer be using that to update firmware and whatnot.
CF-Root will come with CWM installed, so after you get that done, download MIUI and flash through CWM

Thanks a lot will try it out.
This CF-Root right? CF-Root-XX_OXA_JVZ-v4.3-CWM3RFS.zip

Unfortunately the phone is stuck in a bootloop now after installing 2.3.6 JVZ.

Did you make sure re-partition is checked? If it still bootloops after re-partition then try JVT or some other stock ROM and see if that boots up before applying the CF-Root kernel

Yeah I made sure re-partition is checked, and I installed it with the 512 pit file, unless I shouldn't be using the .pit?

your gona have to reflash the rom or install arom thats already rooted you could try darky 10.2 re or check out puggerduk on tube
Root Galaxy S i9000 and install a custom rom

Hey guys refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1451345
He's having the same issue, so just help us out there Thanks alot!

eclipse245 said:
Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Click to expand...
Click to collapse
MIUI is running based on Android 2.3, I found the Android forum that helps me well enough to do my first flashing and rooting. Here is what you need to try to do:
1. Flash your i9000 with XXJVU 2.3.6 ( Value Pack ):
http://www.theandroidsoul.com/xxjvu/
2. Root your I9000 with CF-Root-XX OXA JVU 2.3.6-v4.3-CWM3RFS:
http://www.theandroidsoul.com/root-xxjvu-firmware/
Do everything on the post and you can install MIUI ROM from recovery straight away after that.
Hope this helps. If it does, please consider press 'THANKS' button

[Q] i9000 tried to flash CM9...kinda fsck'ed

[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!

Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium

hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin

Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.

Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]

Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9

[Q] Bricked Gnote, no experience on the field

so i have been running Paranoid android for a while, and wanted to try this out:
http://forum.xda-developers.com/showthread.php?t=2051904
flashed the latest cm10.1 kernel, and then formated cache, dalvic, battery stats, etc.
then i managed to reboot before i had flashed the new rom and got stuck in bootloop. could not access CWM any more
after this i downloaded odin after a few forum reads, and flashed different versions of CWM to see if i could get back in to flash the rom.
the latest one i have in it is this:
http://fs1.d-h.st/download/00033/pQK/GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
as it was recommended in some un-brick thread. still no access to CWM
after this i flashed a stock rom, as i could not find any .md5 or .tar roms to use with odin, and i got at least a samsung logo on hte screen, before i got back to boot screen and was stuck there again.
CWM still not working, or showing up in any way.
out of obvious options i now tried flashing the pit file trough odin from this thread
http://forum.xda-developers.com/showthread.php?t=1424997
and after this the samsung boot logo did not show up anymore. only boot loop
i am now going to try and download the older ginger bread rom and flash it trough odin, but i got no idea if it will make any difference.
otherwise phone goes to download mode just fine, and i got working drivers in windows trough kies.
im quite new to this, and dont really know what would work from here. ill end up hard bricking the phone if i don't get some help, and the trash can will be my n7000 next home.
any advice is welcome
--------------------------------------------------------------------
EDIT:
flashing official rom again after the pit file acrually gave me a working phone again. also i now got 50 gb of drop box storrage for free, so thats nice