Hello,
I have rooted my SGN using method 1 in the below thread,
http://forum.xda-developers.com/showthread.php?t=1329360
I wonder if I can use the Root Kernel for KK1,2,3,4 to have CWM, or there is another root kernel for KK5.
Thanks
Theoritically it shud work as per statment from CF root developer
It was basically made for KK1, and user of KK2-3-4 have tried it and worked successfully.
Now one have to test on KK5, if it won't work, then you can request it to CF to develop it. If it dont works then you can just go back to original kernel. So try it out yourself n report.
dr.ketan said:
Theoritically it shud work as per statment from CF root developer
It was basically made for KK1, and user of KK2-3-4 have tried it and worked successfully.
Now one have to test on KK5, if it won't work, then you can request it to CF to develop it. If it dont works then you can just go back to original kernel. So try it out yourself n report.
Click to expand...
Click to collapse
The Problem is that I dont know how to go back to original Kernel, how to back up original Kernel, or where to download it. NOOB here.
anasmaleh said:
The Problem is that I dont know how to go back to original Kernel, how to back up original Kernel, or where to download it. NOOB here.
Click to expand...
Click to collapse
Easiest way to go back is :
Write down exact firmware you have at present (setting-about phone - baseband version + kernel version)
Now go here
http://www.sammobile.com/firmware/?page=-1
Type N7000 in search field
It will show all available firmware, find your stock, Download it.
Use this guide to get Odin + Installation guide
http://forum.xda-developers.com/showthread.php?t=1389693
(above link is for odin + installation guide, you have to use tar file(PDA), which you have downloaded, as earlier i shown you.
. You will get your stock ROM back.
But i dont think you may need this hopefully
dr.ketan said:
Easiest way to go back is :
Write down exact firmware you have at present (setting-about phone - baseband version + kernel version)
Now go here
http://www.sammobile.com/firmware/?page=-1
Type N7000 in search field
It will show all available firmware, find your stock, Download it.
Use this guide to get Odin + Installation guide
http://forum.xda-developers.com/showthread.php?t=1389693
(above link is for odin + installation guide, you have to use tar file(PDA), which you have downloaded, as earlier i shown you.
. You will get your stock ROM back.
But i dont think you may need this hopefully
Click to expand...
Click to collapse
Thank You very much, I had the courage to try KK1 root Kernel & it worked, I'm backing up my device with CWM now
Then Yes, KK1 will work also for KK5
is CF Roof via odin is available? or still need samsung kies?
Related
Newbie here
i got a galaxy S GT-19000, and updated it to 2.3.5 via KIES.
now i want to ROOT and install CWrecovery, but i dont seem to find guide on installing CWrecovery.
pls help
Just flash any kernel... Most of them give u root + cwrecovery...
I personally recommend semaphore kernel... U ll gets its thread in the development section...
First of all, wich 2.3.5 firmware is it?
you can check it on settings -> about phone, look at the baseband version.
Check it out and when you find out you can go to:
http://forum.xda-developers.com/showthread.php?t=788108
when you get there, hit ctrl+f and type in the three last letters in your baseband version.
and follow the guide on that thread!
Hope this helps!
Edit: or do as sbnaul, would recommend semaphore over plain cf-root.
pls can u tell which version of ODIN flasher to use?
Use Odin 1.82
I apologize in advance if this has already been asked and answered, but I did search and couldn't find a definitive answer.
I have a "German" Note which came with 2.3.5 initially, I did one OTA update (to KK9) and it appears that luckily for me, I was still able to use the ZergRush exploit and root it and get the custom CWM, etc.
Now as I sit on KK9, I see that there is another OTA update available to me (KL7?) that clocks in at about 71MB.
With root, custom CWM, and CF-Root 5.0 at the moment, I don't want to lose that in an update.
So, is it safe to OTA or should I download something else and flash it via CWM? If so, what should I download and how should I flash it?
Thanks! Just don't want to brick or loose root.
-Rob
(From memory only
You can "safely" update: that is, some users have reported no problems but I've already read issues with backup managers not being able to unfreeze apps, boot loops, and keyboard/random apps crashing when you try to open them.
KL7 is a stunning update (my battery now lasts forever). I'm going to root later in the summer once everything becomes stable.
robroy90 said:
I apologize in advance if this has already been asked and answered, but I did search and couldn't find a definitive answer.
I have a "German" Note which came with 2.3.5 initially, I did one OTA update (to KK9) and it appears that luckily for me, I was still able to use the ZergRush exploit and root it and get the custom CWM, etc.
Now as I sit on KK9, I see that there is another OTA update available to me (KL7?) that clocks in at about 71MB.
With root, custom CWM, and CF-Root 5.0 at the moment, I don't want to lose that in an update.
So, is it safe to OTA or should I download something else and flash it via CWM? If so, what should I download and how should I flash it?
Thanks! Just don't want to brick or loose root.
-Rob
Click to expand...
Click to collapse
After update, you cant root it with zergrush exploit as previous. Better you download full rom, install mobile odin pro, n flash it with 'ever root' option. So will get root during flashing
Thank you!
How can I confirm that the update being offered via OTA from KK9 is indeed KL7? Is that the most appropriate and current update path to follow? I know there are many different builds for potentially different devices, and I just want to make sure I am on the right path, and am merely assuming at this point that KL7 is the next step for my Note.
Thanks again, your advice makes much sense, and with already being Root and having Mobile Odin Pro, this seems like a much more intelligent approach. I want my device to be rooted, but rock stock and absolutely stable otherwise.
Regards,
-Rob
I can only say 71MB is almost exactly what I remember the KL7 update being. Other than that, I don't know how you can check (alternatively, you could download the update from XDA, apply it, then check for OTAs to see whether or not it was KL7).
dr.ketan said:
After update, you cant root it with zergrush exploit as previous. Better you download full rom, install mobile odin pro, n flash it with 'ever root' option. So will get root during flashing
Click to expand...
Click to collapse
So, what if you have CWM installed? Can I use Mobile Odin still? Or will this get rid of my CMW recovery and/or screw something else up?
if you use cwm still u can flash it to kl7, but again same, u cant root it. So using mobile odin pro, u can root kl7 during flashing by selecting 'eve root' n again u can cf root n get cwm for kl7 as you did it b4
Edit : yes with installed cwm still can use mobile odin, n remember u need pro version of mobile odin
dr.ketan said:
if you use cwm still u can flash it to kl7, but again same, u cant root it. So using mobile odin pro, u can root kl7 during flashing by selecting 'eve root' n again u can cf root n get cwm for kl7 as you did it b4
Edit : yes with installed cwm still can use mobile odin, n remember u need pro version of mobile odin
Click to expand...
Click to collapse
Got the pro version. Thanks!
So just to make sure, coming from Stock KK9, rooted + with CWM:
Flash KL7 w/ ever root option Odin Pro
Re-install KL7 version of CWM.
Should all be set?
This is non-wipe too right? So everything should remain in tact?
Exactly, and when v dont select re partition box, it shud remain intact.(here also v dont selecting) But always keep backup b4 these kind of stuff.
Edit: I was able to get my phone flashed and updated to KL8. The process I used I descibed here: http://forum.xda-developers.com/showthread.php?p=21153439#post21153439
Ok, I'm using Mobile Odin Pro to try to flash to KL7 from KK5. I have root + CWM in KK5, use Mobile Odin according to the instructions to flash KL7...but I always get stuck at the "Samsung Galaxy Note" boot screen. No matter how long I leave it, it will stay that way. To recover, I have to use Odin on PC to reflash KK5 and then reroot. Any suggestions on what else to try?
I couldn't get flashing with Mobile Odin to work correctly. I ended up getting the update to work by using CWM to flash the KL8 firmware, while pre-rooting. I then had to fix the keyboard issue by flashing the CSC, as mentioned here:
http://forum.xda-developers.com/showthread.php?t=1424997.
Once I did that, I installed CMW Manager again using the method found here:
http://forum.xda-developers.com/showthread.php?t=1329360. With the firmware updated and the radio working (phone wouldn't work in KL7) I just restored everything from a Titanium Backup file and it's all working.
thepartybeaver said:
Edit: I was able to get my phone flashed and updated to KL8. The process I used I descibed here: http://forum.xda-developers.com/showthread.php?p=21153439#post21153439
Ok, I'm using Mobile Odin Pro to try to flash to KL7 from KK5. I have root + CWM in KK5, use Mobile Odin according to the instructions to flash KL7...but I always get stuck at the "Samsung Galaxy Note" boot screen. No matter how long I leave it, it will stay that way. To recover, I have to use Odin on PC to reflash KK5 and then reroot. Any suggestions on what else to try?
Click to expand...
Click to collapse
I have the same problem, but with KK9. I too stuck at the "Samsung Galaxy Note" boot screen.
I also use Mobile Odin Pro...
Any suggestions or what else to try?
I did it like schaggo described in this thread
And it worked for me!!!
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
IdleKing said:
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
Click to expand...
Click to collapse
Please read the instructions in his post
You are on 2.3.6
1. Install Mobile Odin
2. Flash REPACK_LP1 CF
3. Let Rom Boot
4. Go to CWM and flash LiquidSmooth
5. Wipe Data, Wipe Dalvik/Cache
NoRmAlY_CrAzY said:
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
Click to expand...
Click to collapse
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
IdleKing said:
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
Click to expand...
Click to collapse
not really answering the question xD Are you ok GB or ICS right now?
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
IdleKing said:
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
Click to expand...
Click to collapse
As the install guide says you are meant to flash the repack and then go into recovery and flash the rom. You will likely need to flash a gb kernel via obin and then do as hia install guide says
Sent from my GT-N7000 using xda premium
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
IdleKing said:
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
Click to expand...
Click to collapse
Well i am not 100% sure, tbh your safest route would be to re flash a stock gb rom then root it and then try again just to make sure theres no issues, in which case you can download a gb rom from the sticky in the dev section (make sure its a older rootable image!) and flash using odin while your phone is in download mode
please start at http://forum.xda-developers.com/showthread.php?t=1424997 then/or http://forum.xda-developers.com/showthread.php?t=1329360
i am hoping of course, that you can still somehow manage to get into download mode.
I has almost the same issue! I am running speedmod kernel and i want to put back the cf-root 5.3 kernel so I flashed the tar which was included the zimage via mobile oding and after reboot the phone gave me a blank screen and no recovery! only downlaod mmod where I can manage to flash speedmod again via pc odin...
why is that happend?
Come on mate have you even read the opening page for the liquid smoother rom on all opening pages it tells you to the letter how to install and yet you don't follow it and wonder y you have a black screen. Have you installed clock work recovery after rooting your note if not search how to install cwm on you tube cursed4eva is a brilliant guy who spells it all out for you- . Please don't use the fact you a noob as an excuse as I'm probably newer than you but can read and follow instructions to the letter as the developer knows best.
W00t! The phone came back to life! Thanks alot.
Now, what i dont understand is that repack_lp1 thing. I downloaded I9220LP1-N7000-ICS-REPACK.tar ... now do i flash this one using mobile odin? Will this install the CFM?
Look for cursed4eva on YouTube watch the video were he shows you how to install clockwork then read the op of liquid smooth rom simple !
Please do some more research before randomly flashing files without having any knowledge as to what they do.
Before you start fiddling with repacks and leaked ICS based roms, read this: http://forum.xda-developers.com/showthread.php?t=1633938
If you still think it's a good idea to flash anything based on the leaked ICS builds, go to the thread of the rom you want to flash and read the instructions. Again, read the instructions and then to be sure read the instructions once more.
Then follow the instructions step by step and you're good to go.
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem. However you should follow the instruction from their website.
tknguyencsu said:
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem.
Click to expand...
Click to collapse
This snippet of information can only further confuse a man who's mustering the courage to step into the unknown. Don't post stuff like that in threads like this. You can tell that to me or any other vet, and we'll know what you're talking about. OP won't.
tknguyencsu said:
However you should follow the instruction from their website.
Click to expand...
Click to collapse
Now THIS is what he needs to hear.
Model:GT-N7000
Version:N7000XXLPY
Android 4.0.3
Date:2012 May
Open Germany
Download:
http://www.hotfile.com/dl/155490069/c7932d4/N7000XXLPY_N7000OXALPY_DBT.zip.html
from Dr.Ketan:
Who are on i9220 ROM n bootloader, don't use PC Odin to flash this stock I've ROM.
Mobile Odin is still safe for that too.
Originally Posted by lee yun khong
Big thanks to Dr.ketan and Chainfire.
First ICS for Note
N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany posted to OP
This is Non Wipe version
Installation note : How to update from GB ROM to ICS
Install using Mobile Odin safely
- Download N extract ROM
- Copy Extracted file to a folder e.g ICS ROM On Ext/Int SD card
- Download CF Root for LPY
- Extract CF root till get zImage file
- Copy zImage file to same above said folder in SD car
- Open Mobile Odin
- Select 'Open file' N point to ROM file
- select Kernel tab N point to zImage file
- select Ever Root option
- Flash
- You will get ICS ROM + Root + CWM
Note After flsing finish, it will optimize installed application for ICS, then will auto restart
I have experienced Applicatioin installer crash first time, Then i have restarted device
Then again application Installation happened N worked Normally
Titanium Backup, checked. I have restore one old app N worked without issue.
Good Luck!
For those who want to flash the latest ics rom from GB rooted rom., Please follow the instruction provided by DR.ketan, I did follow his instruction completely and ICS loaded with rooted.
I would not say the given instruction will 100% work to all user since we might not know what really mess up with your personal storage after flashing rom and mod so many times.
Just to remind all, please do backup in cwm before proceed to any step as noted above.
video tut on how to upgrade to stock ics (thanks goes to ashwin123)
http://www.youtube.com/watch?v=EjB8IsarMN8
International? Russian? What is it for a Version?
xaoc747 said:
Model:GT-N7000
Version:N7000XXLPY
Android 4.0.3
Date:2012 May
Download:
http://www.hotfile.com/dl/155490069/c7932d4/N7000XXLPY_N7000OXALPY_DBT.zip.html
Click to expand...
Click to collapse
Any one have root instruction pls?
Any others hosts?
chrcad said:
International? Russian? What is it for a Version?
Click to expand...
Click to collapse
German, for Russia only GB.
chrcad said:
International? Russian? What is it for a Version?
Click to expand...
Click to collapse
Open Germany
Is somebody on it already?
Downloading right now.
Please post all whenever you're ready - how you flashed it, features, impressions, speed, etc...multilanguage support?
well....
its says DBT which means German
So it is for N7000 German GNotes.
Thanks fot the information
Chainfire we need ROOT
Shouldn't matter that it's German for most of us. Downloading and will try mobile odin...
dsan45 said:
its says DBT which means German
So it is for N7000 German GNotes.
Click to expand...
Click to collapse
I think it use for all Europe GNotes.
Ok, did someone tried to inject root through Mobile Odin, or just need to try...?
First one, who installs it, posts the video
nex7er said:
Shouldn't matter that it's German for most of us. Downloading and will try mobile odin...
Click to expand...
Click to collapse
keep us posted if mobile odin works...
if i
if i update this over my rooted stock gingerbread rom
what will happen? ill use mobile odin lite
I think it will wipe everything so i prob need to backup using TB.
But how will I install back all the apps without root?
will mobile odin pro keep root alive even it is gingerbread to ICS?
nex7er said:
Shouldn't matter that it's German for most of us. Downloading and will try mobile odin...
Click to expand...
Click to collapse
I'll be interested to know if upgrade works with mobile odin. And also if root can be kept this way.
BTW, downloading too.
Is it multi-CSC?
Thread in General, poster said mobile odin from CM9 -> root achieved! http://forum.xda-developers.com/showpost.php?p=25911144&postcount=89
Careful, people. You might not be able to revert to any other Rom if you flash it straight away.
Read this: http://forum.xda-developers.com/showpost.php?p=25910965&postcount=77
ahalford said:
Ok, did someone tried to inject root through Mobile Odin, or just need to try...?
First one, who installs it, posts the video
Click to expand...
Click to collapse
Just need to try but still downloading.
Anyone have others hosts pls!
I'ma try flashing with Mobile ODIN and EverRoot. Should probably work.
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
JB_ said:
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
Click to expand...
Click to collapse
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
glevitan said:
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
JB_ said:
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
Click to expand...
Click to collapse
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
glevitan said:
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
Click to expand...
Click to collapse
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
JB_ said:
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
Click to expand...
Click to collapse
If your plan is to update to JB you can do that straight foward and then root by flashing philz kernel. That is way easy.
Thanks guys for everything!
Sent from my GT-N7000 using xda app-developers app