Related
Hello everybody
After two days of research and attempts, I finally gave up and decided to ask for direct help.
So, a week ago I rooted an Orange-branded Ace and flashed a few ROMs over the next 3-4 days to try to find the one that could suit better.
However, I screwed up something cause at some point in the process the internal sdcard was not seen anymore.
I mean, I can still go in Recovery or Download mode, flash stuff through Odin, boot without problems and use my phone.
Although, any direct access to internal storage is forbidden.
So, no rooting.
Both 2e and 3e CWM can't mount sdcard.
The type of messages I get :
When I pick "apply update from sdcard" -> E:Failed to mount /sdcard (No such file or directory)
When I rebbot after flashing -> -- Appling Multi-CSC... Installing Multi-CSC. Can't access to '/system/csc/whatever/system/'.
No way to get a USB connection either (different computer were tried), all with drivers correcting installed.
Also tried to get to the storage mass with MiniTool partition Wizard or through Disk management, but nothing.
Factory reset is useless, as well as any recovery's wiping process.
No sdcard formatting is possible.
I flashed several stock firmwares, went all the way back to Froyo, but nothing.
I wanted to try and flash a rooted stock rom, but couldn't find any /:
Hopefully one of you will come up with the fix.
Anyway, thanks in advance to everybody.
Cheers
inthered said:
Hello everybody
After two days of research and attempts, I finally gave up and decided to ask for direct help.
So, a week ago I rooted an Orange-branded Ace and flashed a few ROMs over the next 3-4 days to try to find the one that could suit better.
However, I screwed up something cause at some point in the process the internal sdcard was not seen anymore.
I mean, I can still go in Recovery or Download mode, flash stuff through Odin, boot without problems and use my phone.
Although, any direct access to internal storage is forbidden.
So, no rooting.
Both 2e and 3e CWM can't mount sdcard.
The type of messages I get :
When I pick "apply update from sdcard" -> E:Failed to mount /sdcard (No such file or directory)
When I rebbot after flashing -> -- Appling Multi-CSC... Installing Multi-CSC. Can't access to '/system/csc/whatever/system/'.
No way to get a USB connection either (different computer were tried), all with drivers correcting installed.
Also tried to get to the storage mass with MiniTool partition Wizard or through Disk management, but nothing.
Factory reset is useless, as well as any recovery's wiping process.
No sdcard formatting is possible.
I flashed several stock firmwares, went all the way back to Froyo, but nothing.
I wanted to try and flash a rooted stock rom, but couldn't find any /:
Hopefully one of you will come up with the fix.
Anyway, thanks in advance to everybody.
Cheers
Click to expand...
Click to collapse
Sdcard is an external memory, and yes you can't manage it without root permissions so when you connect your phone via USB to your pc you can't see your internal memory partition, only the external (micro sd-card).
Maybe your sdcard is corrupted, try to format it with an USB adapter and then try again
Viper The Ripper said:
Sdcard is an external memory, and yes you can manage it without root permissions so when you connect your phone via USB to your pc you can't see your internal memory partition, only the external (micro sd-card).
Maybe your sdcard is corrupted, try to format it with an USB adapter and then try again
Click to expand...
Click to collapse
Hey, thanks for the reply
Although, I'm afraid I might not have been clear.
I haven't mounted any microSD so far and I've always been able to access to /mnt/sdcard (before screwing up).
Now, after flashing anything on the device, trying to access to My Files - or whatever file manager - will result in a dead end, since no sdcard is seen by the device itself (so, for example, I have no access to DCIM, or Music, Movies, anything).
I can't format the device cause:
- the computer doesn't see it (although drivers installed), not even from Disk Manager
- general disk-formatting/wiping softwares don't see it
- formatting from Recovery is impossible
inthered said:
Hey, thanks for the reply
Although, I'm afraid I might not have been clear.
I haven't mounted any microSD so far and I've always been able to access to /mnt/sdcard (before screwing up).
Now, after flashing anything on the device, trying to access to My Files - or whatever file manager - will result in a dead end, since no sdcard is seen by the device itself (so, for example, I have no access to DCIM, or Music, Movies, anything).
I can't format the device cause:
- the computer doesn't see it (although drivers installed), not even from Disk Manager
- general disk-formatting/wiping softwares don't see it
- formatting from Recovery is impossible
Click to expand...
Click to collapse
Well, I'm gonna explain my post...In my opinion your SD-CARD is corrupted!!! so format YOUR SD-CARD, NOT YOUR PHONE!
Use an USB sd-card adapter!
Right?
Viper The Ripper said:
Well, I'm gonna explain my post...In my opinion your SD-CARD is corrupted!!! so format YOUR SD-CARD, NOT YOUR PHONE!
Use an USB sd-card adapter!
Right?
Click to expand...
Click to collapse
But you're talking about the microSD, right?
What I mean is that, at the moment, I don't have one mounted in the phone.
I've had one before having problems, but I messed up partitions, so had to format everything anyways.
But, right now, it's out of the phone.
Also, as I was saying, I cannot access common folders like Music or Downloads, nor can I drop the update.zip on the internal memory to root, and I don't think any of this has anything to do with external storage /:
inthered said:
But you're talking about the microSD, right?
What I mean is that, at the moment, I don't have one mounted in the phone.
I've had one before having problems, but I messed up partitions, so had to format everything anyways.
But, right now, it's out of the phone.
Also, as I was saying, I cannot access common folders like Music or Downloads, nor can I drop the update.zip on the internal memory to root, and I don't think any of this has anything to do with external storage /:
Click to expand...
Click to collapse
".../sdcard/music
/sdcard/downloads
/sdcard/DCIM..."
All the folders you are saying, they are in sd-card folder so.... and ROOT.zip must be in SD-CARD to flash it....
Did you try to do wipe data/factory reset and wipe cache via stock rom then when you finished to flash the stock¿?
Viper The Ripper said:
".../sdcard/music
/sdcard/downloads
/sdcard/DCIM..."
All the folders you are saying, they are in sd-card folder so.... and ROOT.zip must be in SD-CARD to flash it....
Click to expand...
Click to collapse
I'm sorry, but I might be misunderstanding.
All these folders are in the sdcard folder.
But the sdcard folder is internal, not a microSD, am I right?
When you suggest that the "SD-CARD" might be corrupted and that I should format it, are you referring to the sdcard folder?
Viper The Ripper said:
Did you try to do wipe data/factory reset and wipe cache via stock rom then when you finished to flash the stock¿?
Click to expand...
Click to collapse
Yep. I've flashed (several times) 2.2.1, 2.3.5 and 2.3.6 stocks, wiping everything before flashing and right after having flashed, but I'm always stuck with no access to /sdcard or failure to mount /sdcard..
inthered said:
I'm sorry, but I might be misunderstanding.
All these folders are in the sdcard folder.
But the sdcard folder is internal, not a microSD, am I right?
When you suggest that the "SD-CARD" might be corrupted and that I should format it, are you referring to the sdcard folder?
Yep. I've flashed (several times) 2.2.1, 2.3.5 and 2.3.6 stocks, wiping everything before flashing and right after having flashed, but I'm always stuck with no access to /sdcard or failure to mount /sdcard..
Click to expand...
Click to collapse
/sdcard = external memory = YOUR MICRO SDCARD!!!!! = THE THING YOU INTRODUCE INTO THE SIDE SLOT!! NOT INTERNAL MEMORY!!!
I'am refering to your SDCARD (above you can see what sdcard means)
And yes all these folder are saved in it
The Galaxy Ace does NOT have an internal sdcard. /sdcard is the external sdcard.
Sent from my air conditioner
CallMeVentus said:
The Galaxy Ace does NOT have an internal sdcard. /sdcard is the external sdcard.
Sent from my air conditioner
Click to expand...
Click to collapse
I hope he'll unterstand xDDD as clear as water
inthered said:
I'm sorry, but I might be misunderstanding.
All these folders are in the sdcard folder.
But the sdcard folder is internal, not a microSD, am I right?
When you suggest that the "SD-CARD" might be corrupted and that I should format it, are you referring to the sdcard folder?
Yep. I've flashed (several times) 2.2.1, 2.3.5 and 2.3.6 stocks, wiping everything before flashing and right after having flashed, but I'm always stuck with no access to /sdcard or failure to mount /sdcard..
Click to expand...
Click to collapse
Hi inthered, I think this is getting confusing.
Sd card is the external storage, where you usually have the data, music, photos, etc. Is this sd card that your Myfiles see, if it isnt there Myfiles cant see anything, cause it cant access internal storage.
To access internal storage you must be rooted and have an app that could do that. I believe you said that your phone inst rooted, so you can only see external storage and seems that it isnt there. So you cant access all that folders ( music, etc,) cause they arent there
Have to mount SD first. You can format SD with Mini tool partition Wizard, in FAT32, and use it only as external storage.
Or you can create in this external storage one partition to help manage the internal storage, but that partition wont be seen by normal apps, like Myfiles, ou PC explorer, and you need to be rooted and everything else that didnt worked first time [but it works, I guarantee that]
To finish, internal storage can only be seen in rooted devices and with some apps ( never Myfiles)
Sorry if I wrote too much, but everyone was right, it had to be better explained
Hope I helped
thanks a lot everyone.
sorry for having been insistent, but i really missed the point about the no-internal-sdcard issue (as you might have noticed).
found only today a little time to re-partition sdcard and flash, and it finally works.
thanks again
I had some huge problem with my Nexus One and I wanted to start over completely, so I stupidly went to CWM recovery and hit format boot, cache, data, sdcard, system, and sd-ext. For some reason I didn't realize this would make my phone unusable and make it have no OS. So now when I turn on the phone it goes straight to the fastboot menu, so I can only access the fastboot, bootloader, and CWM recovery.
I've tried formatting my microSD card and putting a stock PASSIMG.zip file (located at http://forum.xda-developers.com/showthread.php?t=1312540) on my microSD card but the bootloader doesn't detect the PASSIMG.zip file.
Can anyone give any guidance on what I can do now?
Thanks
FIXED. This seems to happen to me so often-- things suddenly working after I already make a thread about my problems. But I discovered that the microSD card was corrupt so that's why it never actually had the PASSIMG.zip file on it. Everything is back to normal, and I restored factory settings :good:
Hi guys!
Here's my situation:
- P990, tonyp's PA 2.6 v.13, old bootloader, Kowalski kernel exp. version 12x
- Phone started boot looping (no obvious cause)
- Tried deleting cache. Didn't help.
- Tried flashing the same ROM from external SD. Didn't help.
- Tried restoring working backup (boot and system only, not complete restore) from CWM. Didn't help.
So then I guess I have to do a complete factory reset, but that means I'll lose everything on my internal SD card, right? I want to make a copy first so that I can keep my files. My nandroid backups are only 2.x GB, so I guess they don't include everything on the internal SD card.
I tried to connect the phone to my laptop, but nothing happened, so I deleted/reinstalled drivers from the LG website. That didn't work, but then I found this post which got me a little further. It said the installation was successful, but when I was in CWM, the disks (int. and ext. SD) wasn't being recognized. When I rebooted recovery (from CWM) or just rebooted the device, the computer recognized the discs and started installing four drivers, but as the phone either gets into CWM or just boot loops, it seems like Windows isn't able to finalize the installation of the drivers. This results in the SD cards not being functional in Windows. I can't even see disk labels or storage used/available.
Does someone have an idea of how I might be able to access the internal SD from Windows? Either by fixing the driver issue, or some other method?
I guess I have to fix this USB issue to be able to try to use adb pull to get all the stuff off the internal memory as well, right? Or is the connection between phone and computer not required to be "complete" to be able to do that? I do not remember for sure, but I believe I had turned on USB debugging before all this mess started. However, I have never used adb before.
I'm massively thankful for any help!
Sammy321 said:
Hi guys!
Here's my situation:
- P990, tonyp's PA 2.6 v.13, old bootloader, Kowalski kernel exp. version 12x
- Phone started boot looping (no obvious cause)
- Tried deleting cache. Didn't help.
- Tried flashing the same ROM from external SD. Didn't help.
- Tried restoring working backup (boot and system only, not complete restore) from CWM. Didn't help.
So then I guess I have to do a complete factory reset, but that means I'll lose everything on my internal SD card, right? I want to make a copy first so that I can keep my files. My nandroid backups are only 2.x GB, so I guess they don't include everything on the internal SD card.
I tried to connect the phone to my laptop, but nothing happened, so I deleted/reinstalled drivers from the LG website. That didn't work, but then I found this post which got me a little further. It said the installation was successful, but when I was in CWM, the disks (int. and ext. SD) wasn't being recognized. When I rebooted recovery (from CWM) or just rebooted the device, the computer recognized the discs and started installing four drivers, but as the phone either gets into CWM or just boot loops, it seems like Windows isn't able to finalize the installation of the drivers. This results in the SD cards not being functional in Windows. I can't even see disk labels or storage used/available.
Does someone have an idea of how I might be able to access the internal SD from Windows? Either by fixing the driver issue, or some other method?
I guess I have to fix this USB issue to be able to try to use adb pull to get all the stuff off the internal memory as well, right? Or is the connection between phone and computer not required to be "complete" to be able to do that? I do not remember for sure, but I believe I had turned on USB debugging before all this mess started. However, I have never used adb before.
I'm massively thankful for any help!
Click to expand...
Click to collapse
Can you tell me version of the recovery you use?
Did you tried wipe dalvik-cache? (Advance-->Wipe dalvik-cache)
bitdomo said:
Can you tell me version of the recovery you use?
Did you tried wipe dalvik-cache? (Advance-->Wipe dalvik-cache)
Click to expand...
Click to collapse
I'm using ClockworkMod Recovery v6.0.3.1.
Yes, I tried wiping dalvik cache as well, but that didn't fix it either.
Are there some other ways of getting out of the bootloop? I don't mind flashing stock rom or whatever else, as long as I can recover my internal SD.
Sammy321 said:
I'm using ClockworkMod Recovery v6.0.3.1.
Yes, I tried wiping dalvik cache as well, but that didn't fix it either.
Are there some other ways of getting out of the bootloop? I don't mind flashing stock rom or whatever else, as long as I can recover my internal SD.
Click to expand...
Click to collapse
Download AIO-toolkit from the developement forum. Install itt, and install nvflash drivers with it.
At the main screen select option 2, and then select option 2 again. Follow teh instructions on the screen, and select TWRP 2.5.0.0 to be installed, or cwm 5.0.2.8, both have working mass storage.
(6.0.3.1 has broken massstorage and adb interface. I think you installed cwm 6.0.3.1 through rom manager, if it that true you are on old bootloader.)
bitdomo said:
(6.0.3.1 has broken massstorage and adb interface.
Click to expand...
Click to collapse
Aha, that explains it!
I installed CWM 5.0.2.8 and I got a little further than before. When I mount USB storage in CWM, my external SD card shows up on my computer, but not my internal SD card. What can be the reason for this? Could the card be corrupted, or are there other ways of getting the internal SD to appear?
I tried mounting everything I could mount from the Mounts and storage menu in CWM, but the external SD was still the only thing that showed up on my laptop.
Thank you so much for helping with this!
Sammy321 said:
Aha, that explains it!
I installed CWM 5.0.2.8 and I got a little further than before. When I mount USB storage in CWM, my external SD card shows up on my computer, but not my internal SD card. What can be the reason for this? Could the card be corrupted, or are there other ways of getting the internal SD to appear?
I tried mounting everything I could mount from the Mounts and storage menu in CWM, but the external SD was still the only thing that showed up on my laptop.
Thank you so much for helping with this!
Click to expand...
Click to collapse
Can you try twrp 2.5.0.0?
bitdomo said:
Can you try twrp 2.5.0.0?
Click to expand...
Click to collapse
I've been trying, but I'm not even able to boot into recovery with TWRP installed.
Any other ideas? :fingers-crossed:
Sammy321 said:
I've been trying, but I'm not even able to boot into recovery with TWRP installed.
Any other ideas? :fingers-crossed:
Click to expand...
Click to collapse
Do a factory reset with a working cwm. You will lose all your installed apps and their data, but it will keep data on internal sdcard. After the factory reset you can boot up into andorid
bitdomo said:
Do a factory reset with a working cwm. You will lose all your installed apps and their data, but it will keep data on internal sdcard. After the factory reset you can boot up into andorid
Click to expand...
Click to collapse
YES! I thought factory reset would delete the internal SD, so I didn't even consider that, but it worked like a charm! Thank you so much for caring and helping! You just made my week! :highfive:
I wanted to update my sister's Nook HD+ to CM11. I don't have an SD card big enough to do a nandroid backup, so I tried to back up to the internal SD card. It was working fine, then it said "backup of /data failed". I thought this was because the internal SD card ran out of space. When I tried to reboot, it found that it's stuck in a bootloop. It goes to the nook screen, then the Cyanoboot screen, then starts loading Cyanogenmod like normal. The boot animation plays then freezes, and the device reboots. I've tried clearing the cache and dalvik cache and it gets a little farther, but it's still in a bootloop. Please help! I would like to avoid doing a factory reset if at all possible.
If internal space was maxed out, would a factory reset even work any better?
If only booting is corrupted, you should just be able to simply dirty flash the same rom build or newer to fix without losing anything.
I don't know where nandroid backups are made internally but if they are accessible via usb on a pc, then you could just delete those files. If it is indeed full storage. And then dirty flash the build again if needed.
There's probably some other ways to go as well.
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Venrun said:
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Click to expand...
Click to collapse
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Ok. At least I got my biggest problem now.
I think my roblem is wipe data/factory reset does not do job it is supposed to do.
I still see folders and files in internal memory after factory reset. I think that is why install aborts and crashes even after successful install.
I think my problem is that wipe data/factory reset does not do its job
It gives me message it is formatting data cache and stuff. And last day they gave me data wipe complete. But the problem is, in internal memory, I can still see old folders and old files.
I think he should be gone if it is formatted. Where do I get the meaning of factory reset wrong?
Its not what is wrong with me. And how can I make factory reset work
And second question is that I tried to install B&N original operating system from cwm-based recovery. I tried a few different versions of
nookHDplus-factory-2.1.1-plain-stock.zip
However it always fail to install. Install aborted for some reason.
Thanks. It seem helpful.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Venrun said:
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Click to expand...
Click to collapse
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
thanks
leapinlar said:
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
trying it. hope it works.
did not work
for about deleting internal data, I went to 'mounts and storage'. used 'format /sdcard' and 'format/ data and/ data/media (/sdcard), but still has stuff in internal memory.
and to my surprise , I have been using CWM-6028. so far. I thought its name was 'NookHDplus-bootable'.
hell. stupid me.
Anyhow, CWM-6028 has been giving me troule
so, I would try other versions.
So far, I have done
1. made boot sd by burning image.
2. copy 'NookHDplus-factory-2.1.0-plain-stock' files and other versions.
3. Insert SD in device and boot CWM.
4. choose zip from sdcard.
5. install factory plain stock.
then I get message 'Failed to retouch 'system/lib/libemoji.so' (WTF is libemoji? and it is always this same file.)
E: error in sdard/nookHDplus-factort-2.2.1-plain-stock.zip(status7)
Installation aborted.
hell. And I tried every factory zip.
Am I doing something wrong?
Failed tp retouch '/system/lib/libemoji' is error message I get
Everytime I tried to install factory stock.
I tried every version of stock files. And I tried all CWM. And even tried TWRP, but it is always the same message what the hell is that emoji?
And what can I do with it?
What frustrates me the most is the fact that it installed 99% in a minute without trouble and stays there 410 minutes until it fails to install. It's driving me crazy
Does CM makes Factory reset by power button and home button does not work either.
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
It is possible you have a bricked emmc. When bricked it looks like it is writing but is really read only and nothing takes. If you still have media files after a successful format data and datamedia then it is bricked. Probably best to get rid of it. You can buy a refurbished unit very cheaply these days.
Sent from my SM-T707V using XDA Premium HD app
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
Assuming that your EMMC is shot, you can try running off SD card this no-emmc version of CM11 ROM: https://iamafanof.wordpress.com/201...-4-4-4-for-bricked-no-emmc-nook-hd-04nov2014/. It's best to use a card with fast randomized block read/write (which is what Class 4 cards are typically best at).
Thanks guys. By the way, what is emmc?
Is it part of CM software?
Does not sounds like hardware.
If I had factory resetted a day earlier, I would not have had problems.
Well. That is the way it is.
I finally kind of got nook working. I am running it on SD card now.
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
digixmax said:
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
Click to expand...
Click to collapse
Thanks a lot. That sounds I can do it.
how you did it
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Please tell how you made SD card work.
thanks.
rkgarg2000 said:
Please tell how you made SD card work.
thanks.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Please confirm if my problem has any other solution
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting. Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
thanks.
digixmax said:
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Click to expand...
Click to collapse
rkgarg2000 said:
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting.
Click to expand...
Click to collapse
Does it boot-loop to recovery?
If so, see http://forum.xda-developers.com/showpost.php?p=55582281&postcount=1459 for potential causes and solutions.
Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
...
Click to expand...
Click to collapse
CWM v6.0.4.6 is not compatible with CM10.x, you need to flash back to the CWM version you previously used.