Database Develop

[Q] Can't download files on this site

I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!

Firecracker_RC said:
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Click to expand...
Click to collapse
I see a KJ4 link. Have you tried the KJ5 thread? It's the newest one for our 7310.

Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again

Firecracker_RC said:
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Click to expand...
Click to collapse
I assume you're on a stock firmware. If I were you, I'd flash this specific version which is already rooted and has busybox as you can read in the OP. Also, flash the v2d version of the motley kernel and go here for the USB charging script and instructions on enabling. I know that last link is for the 10.1, but it is the one motley linked to in the v2b version changelog in his kernel thread.

After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?

Firecracker_RC said:
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Click to expand...
Click to collapse
If you mean flashing a CWM package as the motley kernel, a file goes in the SDcard, you access the CWM Recovery and flash. That's a generic way BUT depending on what you will flash you may have to wipe. That's why I avoided altogether putting generic instructions regarding CWM packages in my guide (instructions may vary between ROM and kernels). Read your flashable package's thread carefully.

kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?

Firecracker_RC said:
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Click to expand...
Click to collapse
No, lol. If you want to flash the motley kernel just follow that thread's instructions. I gave you the motley kernel thread link in a previous post. For kernels, no wipe is necessary, for ROMs, yes.

Ok, thank you. lol

Firecracker_RC said:
Ok, thank you. lol
Click to expand...
Click to collapse
You're welcome. Some people have the tendency NOT to wipe while flashing ROMs...yet complain later on the road. Always wipe when it comes to ROMs if you want to avoid issues. The only bugs you will experience are the ones that come with the ROM already. Better safe than sorry.

Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.

Firecracker_RC said:
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Click to expand...
Click to collapse
No. ODIN clears everything (including kernels, ROMs and CWM Recoveries). Everything back to stock. I was just referring to flashing other custom ROMs (non-ODIN, i.e. CWM flashable) procedures. Stick to the thread instructions in your chosen ROM and you'll be fine. It's just that some don't follow instructions and due to that, they may experience weird bugs.

That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".

P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo

Firecracker_RC said:
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
Click to expand...
Click to collapse
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Firecracker_RC said:
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Click to expand...
Click to collapse
I'm glad you made it!

Thanks for your support. If I ever have some extra change and feel like making a donation, I'll keep you in mind! Hey, where's your donation link anyway? Better get one!

nirogu325 said:
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Click to expand...
Click to collapse
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.

Firecracker_RC said:
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Click to expand...
Click to collapse
As for donations, nah it's ok, I am no developer. As for the suggestion, it was just that, a suggestion for next time. Keep that in mind. It will become a habit down the road.
Sent from my GT-P7310

nirogu325,
I'm back to do my clean wipe. I performed the wipe/data reset in nandroid and now it's saying there is an update from KJ5 to LA3. Do you still think the custom kj5 is better than the stock LA3? I'm wondering if I should just install the update, root, install the motley kernel and go from there...?
Hope you're well! I still think you should add a donate link...you don't have to be a developer, your assistance/guidance is equally helpful to the community.

While I'm waiting, I flashed http://forum.xda-developers.com/showthread.php?t=1375112 and then I noticed I have the old CMR so I downloaded your updated package: GTab89Files and I cannot paste a single file from that folder onto my tab. I can paste files from other folders, but this one I copy and when I go to paste the paste option is not enabled; if I drag I get a little red circle with a line through it. Any ideas as to why it's rejecting?

[Q] LG Thrill GB w/ClockworkMod Recovery

(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick

Rick Tillery said:
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Click to expand...
Click to collapse
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD

The Dark Lestat said:
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
Click to expand...
Click to collapse
Thank you for your help!
Rick

Trojan?
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick

There is no virus, Lestat would never do that
Sent from my LG-P925 using XDA

Just my .02 .....Get rid of Symantec !! They are known for scaring people into a virus frenzy.. Yes, it is possible that it is seeing it as a potential virus because shttp is a workaround from the usual porting of windows ip services. ...
Correct me if i'm wrong somebody please !!
Get yourself Comodo and save your money...
Regards,
Dwayne
PS: somebody on here has written a script that just uses shttp temporarily while
your doing the flash procedure, and then reverts your host files back automatically after your done. You should try it.

dwaynedman said:
Just my .02 .....Get rid of Symantec !!
Click to expand...
Click to collapse
Symantec isn't really a choice on work PC.
Get yourself Comodo and save your money...
Click to expand...
Click to collapse
I'm sorry I can't give the link yet, but if you'll Google you'll see Comodo classifies shttp3.exe as "ApplicUnwnt.Win32.ServerWeb.SmallHTTP.~A" or "UnclassifiedMalware" (I guess depending on the version). A number of scanners find issues with shttp3.exe. I'm not saying it is infected, only that it is doing something suspicious.
Rick

Rick Tillery said:
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
Click to expand...
Click to collapse
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.

Back to square one
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick

The Dark Lestat said:
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Click to expand...
Click to collapse
Thank you, sir. I hope it didn't seem accusing.
Rick

Rick Tillery said:
Thank you, sir. I hope it didn't seem accusing.
Rick
Click to expand...
Click to collapse
It's cool, my friend.
Sent from my Samsung Galaxy S II w/ CM9

Rick Tillery said:
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
Click to expand...
Click to collapse
Is it safe to ignore the su version update?
Short of this, can I override the MD5 checksum? I realize that image could be corrupt, but if I'm just going to replace it with the GB release, does that matter?
Rick

You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne

dwaynedman said:
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
Click to expand...
Click to collapse
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick

Rick Tillery said:
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Click to expand...
Click to collapse
Remove your battery and keep the phone unplugged
Launch the mobile updater tool
Hold the volume+ button plug the phone in and keep holding the volume+ till the computer downloads the drivers your phone is now in download mode
Once the phone is picked up go to customer support on the LG updater tool and click on recovery phone put your imie number in click check (make sure its the right model) an let the updater tool do its job. Once its done flashing launch into recovery volume- plus power plus 3D button do a complete wipe and factory reset and reboot your phone ... you'll lose cwm and root and be back to full stock
Sent from my LG-P925 using XDA

Bricked?
No joy. Following the steps, the upgrade stopped at 6%. Trying a number of times, it eventually forced me to exit the program (no more restarts). Rerunning the updater (and downloading the 420 MB image yet again on a VERY slow connection) I tried again and again, with different combinations of battery and plug order with power and volume buttons, but nothing worked. Checking elsewhere I found some issues had been reported with Windows Vista/7, so I tried on an XP machine. Now the "Start Updating" bar is red (it was always gray with W7). But now when I try to restore (or even update for that matter), it asks for my S/N (it never did that before) and then says it is "no longer able to upgrade." Reading around, it seems this is an indication of the device being bricked.
Rick

It sounds like you are very close to getting it working Rick.
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Should Rick be trying to run LG Updater as administrator ? I didn't, but it might not hurt.
Regards & Luck,
Dwayne

http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Sent from my ****ty supported LG Thrill

dwaynedman said:
It sounds like you are very close to getting it working Rick.
Click to expand...
Click to collapse
I wouldn't have believed you early this morning, but now maybe...
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Click to expand...
Click to collapse
I tried a bunch of different combinations...none seemed to make the app happy. I finally punted Windows 7 and moved to an XP machine, only to get the "no longer able to update" message. At that point I assumed I was screwed (effectively bricked).
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Click to expand...
Click to collapse
It never really vibrated, but I was able to get back into CMR. Unfortunately NONE of my backups work at all. They all have MD5 checksum failures. I tried a trick I found online and got past that step, only to have it say a failure restoring /system. So much for CMR.
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Click to expand...
Click to collapse
Which step? As I mentioned above, I can't even get the first step of the first section (updating the su binary). And if I start at the 3rd section, Symantec prohibits me from using shttp3.exe (I tried to unquarantine it, but it gives a permission error, even as Administrator, when I try to run it), so I'll have to use a different machine.
I was able to reinstall the CM7 3/15 release, so that's something. I was going to restore the stock recovery backup I made, but even that doesn't seem to work. I'm having issue with backups :-(
Rick

i have never been able to restore a backup. i dont know why... but i have tried several times in several different instances.
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
rick tillery, if you want to get your phone back to alive and well i'd suggest doing this:
http://forum.xda-developers.com/showthread.php?t=1558723&page=3
4th post i think

[Captivate] I need massive amounts of help.

Ok so I am a complete noob when it comes to this stuff I am very sorry but I will need a big walkthrough on this. OK I'll tell you where I'm at. I have a Captivate (ver. 2.1 Eclair) and I want to update to the latest version. I tried getting Keis and Keis Mini but neither of them recognize my device. I have a Mac computer and I installed the drivers for the phone but that did no good Also, I would like to root my phone to get non-market apps you know, but all the flashing and which program to use is very confusing to me. Just reading the forums trying to help myself just makes my head spin. Which do I use? Heimdall or Odin? What is the safest way to backup my phone incase anything goes wrong? I've been trying so hard for months now but I still can't get anything accomplished. I just need someone very experienced to teach me, a person who is almost completely new to all this tinkering and etc. Thank you guys so much! :laugh:

Can't help with Kies and updating. I've never had a Samsung phone. Sorry.
No need to root to get non-market apps. Go to: Settings > Security > Unknown sources and check 'Allow installation of non-market apps'. However, installing non-market apps can be risky and is NOT recommended.
Registered Linux user #266531. Android user since v1.0.

Crashdamage said:
Can't help with Kies and updating. I've never had a Samsung phone. Sorry.
No need to root to get non-market apps. Go to: Settings > Security > Unknown sources and check 'Allow installation of non-market apps'. However, installing non-market apps can be risky and is NOT recommended.
Registered Linux user #266531. Android user since v1.0.
Click to expand...
Click to collapse
I can't select that option because it isn't available to be chosen. I must root it.

sabbytown1 said:
I can't select that option because it isn't available to be chosen. I must root it.
Click to expand...
Click to collapse
Are you sure? I've never seen a phone without that option. It might be in a different place in the settings than the one I gave.
Registered Linux user #266531. Android user since v1.0.

Crashdamage said:
Are you sure? I've never seen a phone without that option. It might be in a different place in the settings than the one I gave.
Registered Linux user #266531. Android user since v1.0.
Click to expand...
Click to collapse
AT&T does remove that option. It was removed on my X10 too and there is a captivate section with all info.
Captivate: http://forum.xda-developers.com/forumdisplay.php?f=703

Crashdamage said:
Are you sure? I've never seen a phone without that option. It might be in a different place in the settings than the one I gave.
Registered Linux user #266531. Android user since v1.0.
Click to expand...
Click to collapse
Yes he is sure. On the early android devices att removed the option. It was later added back on in an update. As stated above. Head over to the captivate section and you will find all your answers. Let me know if you don't and ill help the best I can.
sent from my cell in Arkham

This is the best collection of Do it yourself videos
Captivate Videos

zelendel said:
Yes he is sure. On the early android devices att removed the option. It was later added back on in an update. As stated above. Head over to the captivate section and you will find all your answers. Let me know if you don't and ill help the best I can.
sent from my cell in Arkham
Click to expand...
Click to collapse
Ok so I just rooted my phone. Not sure how I can tell I did, but I did. Since I have a Mac, many forums are no use to me. Especially when flashing (p.s. I don't even know what that means) I downloaded the latest Heimdall on my Mac, but I have no idea how it works, or how to get ROMS. What do kernals do because I see those are needed? Also, when I rooted my phone, aren't I able to install non-market apps onto my phone? Because I have a .apk file for the Amazon Market app on my internal SD card but it still doesn't allow me to install it.

sabbytown1 said:
Ok so I just rooted my phone. Not sure how I can tell I did, but I did. Since I have a Mac, many forums are no use to me. Especially when flashing (p.s. I don't even know what that means) I downloaded the latest Heimdall on my Mac, but I have no idea how it works, or how to get ROMS. What do kernals do because I see those are needed? Also, when I rooted my phone, aren't I able to install non-market apps onto my phone? Because I have a .apk file for the Amazon Market app on my internal SD card but it still doesn't allow me to install it.
Click to expand...
Click to collapse
Purchase these 2 app's from the market. You will first need to set up a Google account and a Google Pay account.
Mobile Odin
and
SuperUser
You need to root the system before installing SU

My only concern is being able to instal non-market apps. How will I complete this using these two apps? Is there a specific ROM I need to download?

sabbytown1 said:
My only concern is being able to instal non-market apps. How will I complete this using these two apps? Is there a specific ROM I need to download?
Click to expand...
Click to collapse
No, installing these 2 items will unlock the phone. It will also make it possible to install a rom whenever you want. Superuser access is what allows you to use the app's you are looking for. You need Odin installed to install superuser.

Also, I bought both of the apps. I couldn't get the update for Superuser Elite, and Mobile ODIN doesn't work because it says it can not find the Mobile ODIN package...

sabbytown1 said:
Also, I bought both of the apps. I couldn't get the update for Superuser Elite, and Mobile ODIN doesn't work because it says it can not find the Mobile ODIN package...
Click to expand...
Click to collapse
did you read the directions on Google Play on how to install? Did you Google/YT using Mobile Odin on Captivate?
While we are all here to help, you need to do some legwork.
What have you learned in searching the I897 forum?

tomween1 said:
did you read the directions on Google Play on how to install? Did you Google/YT using Mobile Odin on Captivate?
While we are all here to help, you need to do some legwork.
What have you learned in searching the I897 forum?
Click to expand...
Click to collapse
Ok so, I know the best way to be able to install non-market apps is by flashing the rom Cognition, but the download is no where to be found. but before I get the ROM I need Rom Manager right? I got it, but can't use it because I bought it without getting the free version first to get the actual files. Why? because I figured my device isn't rooted. If I were to root the Captivate, I would be able to download the free version. I tried rooting with the One-Click root that I downloaded, which is the only one that I saw on the wiki that actually seemed plausible. It doesn't work. It is supposed to push an update.zip to my SD card and it is there. but when I go into Recovery Mode, the option to choose the Update.zip isn't there. So know I know what I need to do.
1. Find a working rooting program for my mac
2. Get the free version for Rom Manager
3. Find a link and download the Cognition ROM
4. Flash the ROM onto my phone and then I should be able to install APK files from my SD card right?
ugh....

sabbytown1 said:
Ok so, I know the best way to be able to install non-market apps is by flashing the rom Cognition, but the download is no where to be found. but before I get the ROM I need Rom Manager right? I got it, but can't use it because I bought it without getting the free version first to get the actual files. Why? because I figured my device isn't rooted. If I were to root the Captivate, I would be able to download the free version. I tried rooting with the One-Click root that I downloaded, which is the only one that I saw on the wiki that actually seemed plausible. It doesn't work. It is supposed to push an update.zip to my SD card and it is there. but when I go into Recovery Mode, the option to choose the Update.zip isn't there. So know I know what I need to do.
1. Find a working rooting program for my mac
2. Get the free version for Rom Manager
3. Find a link and download the Cognition ROM
4. Flash the ROM onto my phone and then I should be able to install APK files from my SD card right?
ugh....
Click to expand...
Click to collapse
Lets do 1 thing at a time.
uninstall the apps How to Once un-installed. reboot the phone.
Start again but install the free version first

What you need to do is go to the Captivate section of this forum and install Apex 12.5. It has a one click Heimdall package. Put your phone into download mode by holding down both volume buttons and plugging it into the computer. Follow the instructions and you are now running a custom ROM.

NightHawk877 said:
What you need to do is go to the Captivate section of this forum and install Apex 12.5. It has a one click Heimdall package. Put your phone into download mode by holding down both volume buttons and plugging it into the computer. Follow the instructions and you are now running a custom ROM.
Click to expand...
Click to collapse
You're having him try something he is not looking for. He is simply trying to root the phone. The package from watsa/psych0phobia is #1- not I897 based and 2- a full rom. He does not want this
Please be careful in your recombination. Also once he has 10 posts he can ask further questions within that section.

@ the OP:
1st of all, why is it SO important to be able to install non-market apps?
2nd, no offense but you don't seem to have the knowledge or skill level you should really have before attempting to root your phone. So...
3rd, do some research & reading. Make sure you fully understand the terminology and procedure for rooting your specifc phone.
4th, have a recovery & rescue plan ready in.case things go wrong. And be willing to accept the consequences.
Registered Linux user #266531. Android user since v1.0.

I uninstalled everything I had related from trying to root. I couldn't get the free version. All I really need is something to root my phone via Mac.
Sent from my SAMSUNG-SGH-I897 using XDA

sabbytown1 said:
I uninstalled everything I had related from trying to root. I couldn't get the free version. All I really need is something to root my phone via Mac.
Sent from my SAMSUNG-SGH-I897 using XDA
Click to expand...
Click to collapse
Why do you need to root via mac, when it can be done directly from the phone?
Just say anything here now, and you will have 10 posts. You will then be able to post in the Development section of the I897
Make sure to check your PM's

[Q] Challenge: Find me a link, please.

Can I get a link to a thread on a WORKING method to root the KF2 running firmware version 10.1.3? There are thousands of people out there with old versions of rooting that do not WORK. Extremely frustrated. I've wasted a lot of time, and I cannot find what I am looking for in any threads.
I have installed drivers onto my machine and now need to get TWRP to show Online. It says offline all the time and I'm wondering if I simply haven't gained access to the correct version?
PLEASE! Help.
Zinja

zinja said:
Can I get a link to a thread on a WORKING method to root the KF2 running firmware version 10.1.3? There are thousands of people out there with old versions of rooting that do not WORK. Extremely frustrated. I've wasted a lot of time, and I cannot find what I am looking for in any threads.
I have installed drivers onto my machine and now need to get TWRP to show Online. It says offline all the time and I'm wondering if I simply haven't gained access to the correct version?
PLEASE! Help.
Zinja
Click to expand...
Click to collapse
I think you're getting a little confused here. First of all, TWRP never shows online or offline...It's custom recovery that sits on your recovery partition. You're probably thinking of KFU. Second, neither TWRP nor KFU work for the 2nd gen Kindle Fires. You cannot install any ROMs on the 2nd gen KFs, only root them. There are instructions for rooting them, but they aren't anything like the original.
http://forum.xda-developers.com/showthread.php?t=1893838

Thank you!
soupmagnet said:
I think you're getting a little confused here. First of all, TWRP never shows online or offline...It's custom recovery that sits on your recovery partition. You're probably thinking of KFU. Second, neither TWRP nor KFU work for the 2nd gen Kindle Fires. You cannot install any ROMs on the 2nd gen KFs, only root them. There are instructions for rooting them, but they aren't anything like the original.
http://forum.xda-developers.com/showthread.php?t=1893838
Click to expand...
Click to collapse
1. Thank you for clearing up my confusion on TWRP and KFU. You were correct.
2. I will follow insturctions on the new root method.
3. I want to make sure: NO ROMs are working yet on the KF2? Thanks, Amazon? Will someone crack that? Are you optimistic?
4. I also want to make sure: this is now bogus? Or never WAS for the KF2? Only KF1? ---> http://www.ibtimes.co.uk/articles/3...kindle-fire-miui-android-jellybean-update.htm

zinja said:
1. Thank you for clearing up my confusion on TWRP and KFU. You were correct.
2. I will follow insturctions on the new root method.
3. I want to make sure: NO ROMs are working yet on the KF2? Thanks, Amazon? Will someone crack that? Are you optimistic?
4. I also want to make sure: this is now bogus? Or never WAS for the KF2? Only KF1? ---> http://www.ibtimes.co.uk/articles/3...kindle-fire-miui-android-jellybean-update.htm
Click to expand...
Click to collapse
No, there are no ROMs - check out the thread here:
http://forum.xda-developers.com/forumdisplay.php?f=1786

no99sqrd said:
No, there are no ROMs - check out the thread here:
http://forum.xda-developers.com/forumdisplay.php?f=1786
Click to expand...
Click to collapse
Thank you for the link to the thread, in which I will eventually find what I am looking for.
I now see info in there that is for the KF2HD and that the new ones are locked?
Is there specific direction for KF2's and how to frickin' root them?

zinja said:
Thank you for the link to the thread, in which I will eventually find what I am looking for.
I now see info in there that is for the KF2HD and that the new ones are locked?
Is there specific direction for KF2's and how to frickin' root them?
Click to expand...
Click to collapse
The KF2s are the same way. They're already running ICS, so rooting and installing a new launcher is usually sufficient to get a decent tablet experience, but you still won't get the typical ICS interface you might be used to. You won't have any kind of decent recovery to fall back on in case something goes awry, so you should be very careful when messing with files you wouldn't normally have access to. If you do decide to go with a launcher, stay away from the ICS launcher. As tempting as it may be, it has caused a good number of the original KFs to be bricked, requiring the intervention of a custom recovery to fix.
As far as installing any kind of ROMs, you might as well forget about it for now. The motivation for getting past the new KFs security seems to have dwindled quite a bit in the last couple of weeks, and I personally think it's not going to happen, but you never know...

ComputerStill Can't Get My ComputerToo Recognize the Kindle. Looks A-ok In Device Manager.
Ive Read A Lot About The Usb .Ini Drive File And Doing Something With It. What Am I Doing Wrong? ADB tools And SDK are Installed, When I Run The Rootqemu File It Is Stuck At Mailer Demon Startered Successfully (Or Whatever It Says Officially).
A LittlE Korehelp Here Should Get Me There...

Can't root GT-S5570

I'm a newb, so don't jump at me if the solution is simple.
I tried rooting my Mini(GT-S5570)using different threads around here, and none worked. I have tried booting into recovery mode and installed 5 different root packages, none worked. Superoneclick is unavailable(none of the download links worked, also tried googling for it, nothing). I'd like a tutorial that can work, since i'll add some infos below why it might not work.
I am running an android version made for vodafone germany, with 4 system apps that are vodafone only and can't be deleted
maybe the version number can help :
PDA: S5570BUKT2
Phone: S5570XWKT8
CSC: S5570VCRKT2
Edit: I want to go with the "flash cwm with odin" then flash rom, but Odin doesn't pick up the phone in download mode, only in upload mode(when I boot with volume up+home+power button). I installed Kies for drivers, so I don't see how I could've gone wrong

Same issue with my friend anyone can resolved this kind of problem?

What recovery do you have? What error you get when you're trying to install the packages?

tomi456 said:
What recovery do you have? What error you get when you're trying to install the packages?
Click to expand...
Click to collapse
I can't use any custom recovery since I don't have it rooted(it's the default one I think), and I am not getting any error whilist installing packages, the superuser icon is there, just it still says my phone doesn't have root permissions

If you have a 2.3.6 Android, then the attached files will root (pop) and unroot your phone to your will.
"Copy the pop_2.3.6.zip file to the root of your SD Card. Make sure you do not extract the contents of the zip file. Just copy the zip file to your SD Card.
Boot your phone into recovery. To do this, turn off your phone and press the OK button and Power button. You can release the buttons when you see the Samsung Logo to enter the recovery mode.
From the recovery menu, select “Apply update from SD Card” and choose the zip file you downloaded in step 1.
Flash the zip and then choose “Reboot system now” option.
After your phone reboots, check if you have the superuser Application installed"
Standard disclaimer applies I'm not responsible for anything anybody does using my advice (given to the best of my knowledge).

smolny2 said:
If you have a 2.3.6 Android, then the attached files will root (pop) and unroot your phone to your will.
"Copy the pop_2.3.6.zip file to the root of your SD Card. Make sure you do not extract the contents of the zip file. Just copy the zip file to your SD Card.
Boot your phone into recovery. To do this, turn off your phone and press the OK button and Power button. You can release the buttons when you see the Samsung Logo to enter the recovery mode.
From the recovery menu, select “Apply update from SD Card” and choose the zip file you downloaded in step 1.
Flash the zip and then choose “Reboot system now” option.
After your phone reboots, check if you have the superuser Application installed"
Standard disclaimer applies I'm not responsible for anything anybody does using my advice (given to the best of my knowledge).
Click to expand...
Click to collapse
Oh well. Tried it, the superuser icon is there, but multiple root checker apps say it's still not rooted. Any other ideas?
Extra(edit): I have wiped any data, restoring my phone before doing the steps you listed above

S1ckMike said:
Oh well. Tried it, the superuser icon is there, but multiple root checker apps say it's still not rooted. Any other ideas?
Extra(edit): I have wiped any data, restoring my phone before doing the steps you listed above
Click to expand...
Click to collapse
Open superuser app and let it update binaries. This needs internet access, but it SHOULD be fine after that.
Tapatalk-kal küldve az én GT-S5570-el

ast00 said:
Open superuser app and let it update binaries. This needs internet access, but it SHOULD be fine after that.
Tapatalk-kal küldve az én GT-S5570-el
Click to expand...
Click to collapse
I updated it from market, it still doesn't work... But you said to update binaries, is there anything different than what I did?
Oh btw when I enter the superuser app it says below the "elite not installed-get elite" Su binary not found" I think that could be one of the reasons :s

S1ckMike said:
I updated it from market, it still doesn't work... But you said to update binaries, is there anything different than what I did?
Oh btw when I enter the superuser app it says below the "elite not installed-get elite" Su binary not found" I think that could be one of the reasons :s
Click to expand...
Click to collapse
"After flashing the zip, make sure you connect to internet and then it'll ask you to update superuser app. Do so and then from within superuser app, update su binaries. Then, it should work without any issues"
Some more info:
http://androidsu.com/superuser/
https://play.google.com/store/apps/details?id=com.noshufou.android.su
I remember it was a bit tricky, still it seems your phone IS rooted (if you installed pop_2.3.6.zip from recovery). Updating supersu from market means the binary portion is not up-to-date, that's why IMO you have to update binaries. So click on the supersu icon, and find the "update binaries" option (needs internet connection).
If it fails, have a look at
https://play.google.com/store/apps/details?id=com.noshufou.android.su.fixer
Don't remember if I needed it or not with the pop_2.3.6.zip.
BTW, if your Mini is out of warranty period, why don't you put something bloatware-free on it? (with Odin)
I can highly recommend TassNewExperience v.10.1 final2,
or newer CM 7.2 clean of 18.05.2014.
Both shall (most probably) fix your problem with rooting, both are fast, stable, battery-friendly.

smolny2 said:
BTW, if your Mini is out of warranty period, why don't you put something bloatware-free on it? (with Odin)
I can highly recommend TassNewExperience v.10.1 final2,
or newer CM 7.2 clean of 18.05.2014.
Both shall (most probably) fix your problem with rooting, both are fast, stable, battery-friendly.
Click to expand...
Click to collapse
I want to go with odin, since I can't update the binary from updated app, and with original app verison an error(check for new version failed) prevents me from updating. Anyone can redirect me to a thread on how to flash with odin on my phone?

S1ckMike said:
I want to go with odin, since I can't update the binary from updated app, and with original app verison an error(check for new version failed) prevents me from updating. Anyone can redirect me to a thread on how to flash with odin on my phone?
Click to expand...
Click to collapse
Is your phone sim-locked for Vodafone network? If yes, go to Vodafone to remove sim-lock prior to anything.
Here is a decent ROM to start with (I've been using it for half a year):
http://forum.xda-developers.com/showthread.php?t=1648213
and there are working links in the second post, that I followed myself, explaining howto.
Here is a more detailed guide for flashing CWM recovery:
http://forum.xda-developers.com/showthread.php?t=1342190
IMHO you should put unbranded, stock Gingerbread ROM in your Mini before trying to flash CWM recovery.
Remember to make a backup of your data, my recommendation:
https://play.google.com/store/apps/details?id=com.idea.backup.smscontacts
and perhaps a "dump" backup of the partition holding IMEI of your MIni (you have to look for details - keywords efs and/or stl5).

smolny2 said:
Is your phone sim-locked for Vodafone network? If yes, go to Vodafone to remove sim-lock prior to anything.
Here is a decent ROM to start with (I've been using it for half a year):
http://forum.xda-developers.com/showthread.php?t=1648213
and there are working links in the second post, that I followed myself, explaining howto.
Here is a more detailed guide for flashing CWM recovery:
http://forum.xda-developers.com/showthread.php?t=1342190
IMHO you should put unbranded, stock Gingerbread ROM in your Mini before trying to flash CWM recovery.
Remember to make a backup of your data, my recommendation:
https://play.google.com/store/apps/details?id=com.idea.backup.smscontacts
and perhaps a "dump" backup of the partition holding IMEI of your MIni (you have to look for details - keywords efs and/or stl5).
Click to expand...
Click to collapse
I don't think it's simlocked, since I don't have a vodafone sim and it's working perfectly, and I'll try using your stuff
Edit: i've installed kies, and when I follow the guide, it doesn't get picked up by ODIN, and the pc says it malfunctioned(the usb device) Is this related to me having windows 8?
Edit 2: I would really like some real-time assistance through skype or whatnot, since i feel like i'm always doing something wrong...and when i'm following a guide, there's always a link that's broken, or a file that's outdated, not working etc

S1ckMike said:
I don't think it's simlocked, since I don't have a vodafone sim and it's working perfectly, and I'll try using your stuff
Edit: i've installed kies, and when I follow the guide, it doesn't get picked up by ODIN, and the pc says it malfunctioned(the usb device) Is this related to me having windows 8?
Click to expand...
Click to collapse
I used Odin in WinXP, have no experience with Win8 - only heard most of the older stuff didn't work in Win8. So you might be pioneering Odin in Win8
But there is another way of rooting Android devices, introduced last year, with a universal chinese soft. As the soft is new, could work in Win8 (it only roots the devices). Don't remember the name of it, there was a lot of info on the Net in the second half of last year. It worked for some no-name tablets of my friends.

smolny2 said:
I used Odin in WinXP, have no experience with Win8 - only heard most of the older stuff didn't work in Win8. So you might be pioneering Odin in Win8
But there is another way of rooting Android devices, introduced last year, with a universal chinese soft. As the soft is new, could work in Win8 (it only roots the devices). Don't remember the name of it, there was a lot of info on the Net in the second half of last year. It worked for some no-name tablets of my friends.
Click to expand...
Click to collapse
That didn't quite help me ... I guess I'll use another pc, but I'll have to wait for the school year to finish...If you find any other method that might work, make sure to post it here

S1ckMike said:
That didn't quite help me ... I guess I'll use another pc, but I'll have to wait for the school year to finish...If you find any other method that might work, make sure to post it here
Click to expand...
Click to collapse
Well, I'm not a pro in mobiles software - but having the info given in my last post, it's just a minute googling to find:
http://www.3ptechies.com/mobile/android/vroot-rooting-method-for-android.html
http://www.mgyun.com/en/GetVRoot
The orig. soft is in chinese, but used it without problems "the monkey way".
That gives you root - and nothing more (but should be enough to play with Android till the end of school
No help with Odin in Win8, sorry.

smolny2 said:
Well, I'm not a pro in mobiles software - but having the info given in my last post, it's just a minute googling to find:
http://www.3ptechies.com/mobile/android/vroot-rooting-method-for-android.html
http://www.mgyun.com/en/GetVRoot
The orig. soft is in chinese, but used it without problems "the monkey way".
That gives you root - and nothing more (but should be enough to play with Android till the end of school
No help with Odin in Win8, sorry.
Click to expand...
Click to collapse
Tried Vroot, says "root failed".
-_-......................................OH COME ON how can my phone be unbreakable like that? srsly it's starting to really piss me off

S1ckMike said:
Tried Vroot, says "root failed".
-_-......................................OH COME ON how can my phone be unbreakable like that? srsly it's starting to really piss me off
Click to expand...
Click to collapse
Weird. Perhaps (as above) it is in fact rooted. Try to unroot with unroot zip, and give a chance vroot again?
Unless there are some more residuals of previous attempts of rooting, and they interfere? Back to factory settings after unroot.
Or check which superuser u have on your Mini, and put binaries as zip from recovery? as in the first comment here:
http://androidsu.com/superuser/
And last but not least, it shouldn't be too difficult to put some old WinXP on an old disk/partition just to use Odin. And taking into account your first post "I tried rooting my Mini(GT-S5570)using different threads around here, and none worked", perhaps your Mini is so messed up that Odin is your only option?
Anyway, it's a mystery, and would really appreciate if you keep us informed of the progress.

smolny2 said:
Weird. Perhaps (as above) it is in fact rooted. Try to unroot with unroot zip, and give a chance vroot again?
Unless there are some more residuals of previous attempts of rooting, and they interfere? Back to factory settings after unroot.
Or check which superuser u have on your Mini, and put binaries as zip from recovery? as in the first comment here:
http://androidsu.com/superuser/
And last but not least, it shouldn't be too difficult to put some old WinXP on an old disk/partition just to use Odin. And taking into account your first post "I tried rooting my Mini(GT-S5570)using different threads around here, and none worked", perhaps your Mini is so messed up that Odin is your only option?
Anyway, it's a mystery, and would really appreciate if you keep us informed of the progress.
Click to expand...
Click to collapse
I installed kies for drivers and the phone still doesn't get picked up by odin... I would've gone with odin a long time ago if it worked...I'll try on another pc... Wish me luck

SRS One Click Root for Android

Galaxy_Rohit said:
SRS One Click Root for Android
Click to expand...
Click to collapse
Thanks bud but it gets stuck at "10:08:57 - Getting OffSets.. : 0x8003 0x8005 (False)"