Hello
I have Jabra wired (not Bluetooth) headset with mic. It is very comfortable for my ears. But unfortunately it is 2.5mm, not 3.5mm. I bought 2.5->3.5 adapter off eBay and while it is fine with music, there is a problem - it does not send sound from Jabra's microphone back to HD2.
So people do not hear me at all, or hear me very bad, because basically they hear me from phone's mic, not Jabra's mic
I know that HD2 works fine, because mic works as expected with included HD2 headset.
Any suggestions ? Besides buying different 3.5mm headset or moving to BT ?
Does your headset and adapter have 4 pins?
I think you should use a 4-pin converter, cause the headset uses a additional pin to transfer the mic signal.
how would I know how many pins are there? It is rounded, do not see any pins :-(
Yes its rounded, but in 3 or 4 contacts separated.
Related
Hello
the Jabra bluetooth headset (http://www.jabra.com/) seems to be fine!
But I want to use something like that fitting inside a motorbikers helmet!
Does anybody has an idea where to find a stereo headset (with a bluetooth dongle like that from jabra) fitting in a helmet?
Also I am looking for a good small extern stereo microphone for the XDA!
thanks for your informations
heiner said:
Also I am looking for a good small extern stereo microphone for the XDA!
Click to expand...
Click to collapse
Audio input on the XDA is mono.
thanks for this hint concerning the audio input!
and where can I get a mono microphone with a fitting plug?
There's an accessory (not off the top of my head right now...) that converts between a 2.5 mm headset jack and the XDA's headset connector, and another one that does mic 2.5mm and stereo headset 3.5 mm.
Or solder something yourself... All the info is on
http://xda-developers.com/connectors
I know this isnt as high tech as a Bluetooth headset such as the Jabra... but as a low tech solution, Why not just use the headset that comes with the xda? You can certainly improve the ear fitting with some replacement ear sponges. or even better, slice into the cabling, and replace the earpieces with the SONY headphones that are like mini "in-ear defenders"
Quick tip: to solder headphone cables, use a soldering iron with a little cored solder to melt away and tin the very thin coating on the exposed cables, as headphone cables don't have sleeving in the traditional way. Dont hold it on for too long though!
Sorry, I can't quote any model numbers for the sony headphones, but the nice design feature is that
1) They are inside the ear, so it wont interfere with getting your helmet on/off
2) The Bass response with these headphones are even better than the standard xda headset. Because they are a snug fit like an industrial ear plug, so the ear canal resonates the sound better without losses. In a noisy environment you should find this better, e.g. with the roaring of a bike engine.
Advantage of modding with the standard headsetYou can modify the push to talk button by opening the pod and wiring a switch in parrallel to your handlebars, something thats easy to use with big bike gloves on, e.g. an automotive switch from Halfords. And of course the most important part, you get the xda four pole 2.5mm connector, which is very difficult to get hold of!
The other part of the push to talk switch "pod" on the xda headset is the microphone, so you could mount it somewhere in the part of the helmet near your mouth.
Obviously these ideas will need some "interconnect cables", from your xda to your handlebars, and from either to your helmet, I did see a posting with a motorbike cradle mount somewhere on this site.
Connectors
You should be able to get an inline solderable coupling connector (male & female) respectively from your local electronics shop or http://www.maplin.co.uk a small 3.5mm connector will suffice.
Obviously for the mic you need two or three connectors depending on how you rig it up.
You can get away with a mono one and one with three (in other words a normal stereo one) for the headphones, which has three poles
Headphones (stereo 3.5mm solderable plug & coupler)
1) Left
2) Right
3) Ground
Microphone (mono 3.5mm solderable plug & coupler)
1) Signal
2) Ground
Switch (mono 3.5mm solderable plug & coupler)
1) from pod button contacts
2) from pod button contacts
Obviously if you're not keen on using the phone while riding, then dont bother with the mic, switch etc, and just make up the headphones for music etc.
If this is the case, just buy the sony headphones and use a 2.5mm stereo to 3.5mm adapter (available at most maplin stores)
I've already done this mod using a replacement xda headset bought from expansys.com for a cassette adapter for in-car use. And have had many hours of music listening in between and during GPS instructions on long journeys!
Software called "Withmp3" is very good for in-car music playback (Its just like Winamp) because you can assign hardware buttons to skip tracks or stop the music. Even while using Tom-Tom navigator for example.
heiner said:
Hello
the Jabra bluetooth headset (http://www.jabra.com/) seems to be fine!
But I want to use something like that fitting inside a motorbikers helmet!
Does anybody has an idea where to find a stereo headset (with a bluetooth dongle like that from jabra) fitting in a helmet?
Also I am looking for a good small extern stereo microphone for the XDA!
thanks for your informations
Click to expand...
Click to collapse
by far the safest way to do this is look at the communication/intercom systems currently on offer from motorcycle suppliers. i know no biker is ever going to have an accident, but things sticking in ears is probably not a good idea if head does hit the road.
i am 'lucky' enough to have a bike already fitted out with passenger intercom, radio and 'phone connection but i'm damned if i can find the right sort of 'phone connector and the bike manufacturer is about 2 years behind. so i suppose i'll have to find someone who can make one. any ideas?
ian
Motorola HS-830!
Bought two recently and they work just great!
Except for the fact that XDA/QTEK/etc... can't send audio, so I can't listen to MP3 using this helmet headset.
Anyhow, you can either use the helmet headset for phone calls or music (using iPAQ) or connect both helmet headsets to have a two way conversation with your passenger!
Work just great, and it comes with a neck lace, when not on the bike!
Audio bluetooth routing...
I found on this forum very little information about an audio driver (audio profile actually) product for PPC from AveLink: http://www.avelink.com/Bluetooth/Products/AudioDriver/index.htm
But they seem to integrate the MS Stack with two new profiles and the A2DP everybody is looking for!
I've been looking for a solution for... an eternity...
Anyhow can't find the product for purchase anywhere so I wrote them to see the features/price/etc... I'll let you know guys
Gee, hope is a strong feeling that leads us to keep trying... I can't even think on how much time I spent looking for this
PPC Techs XDA/SX56 2.5mm/3.5mm Audio Headset Adaptor
This adaptor converts the proprietary 4 conductor Pocket PC phone jack found on the XDA to a STD 2.5mm headset jack and 3.5mm stereo headphone Jack, and includes a PPCPE compatible answer/mute button. The adaptor cable is approximately 5" long.
Click to expand...
Click to collapse
http://www.expansys.com/product.asp?code=PPCPADPT01
What are your thoughts. Seems like a good product. Be able to use some decent headphones for listening to those mp3z . . .
Anybody used one of these?
is the answer/mute button only for those 2 functions or is that module also acting as a microphone (don't think so)? looks good to me but i use the headset adaptor i bought from this internet site based in hong kong. check out:
http://pc-mobile.net/pxdaa.jpg (the website is http://pc-mobile.net)
it comes with a standard 2.5 mm jack for the xda. the wire is on a retractable mechanism to avoid tangling. at the other end is the stereo phone jack which serves as an answer/end button and as a microphone as well. there's a single headphone jack connected which uses a 3.5mm plug. when you want to listen to the toons using your 2-headphone set; you simply unplug the jack and insert any 3.5mm plug-based headset. in effect you can use any 3.5 headset as handsfree.
costs 26usd but services are 5-stars for me.
cheers
Anyone tried this adaptor from pc-moblie.net? The sound quality is good or bad?
i doubt that it could damage the quality so you can hear it unless you connect it to a stereo's lineIn and play it out using real speakers
those headsets are too limited imho to take much damage from a few connectors
However, all these things are not suitable for xdaII.
I bought one from pc-mobile and the quality is good. However, since the new xdaII got 2 buttons in its handsfree design, this product from pc-mobile is not fully compatible. You can hear from it but you can't pick up or end call from it as compared to xda1 you can.
I hope they can produce another product which is fully compatible with xda2. Otherwise, I may have to go for bluetooth but really worry about the battery.
Also, can I or is there anyone using the bluetooth handsfree for mp3 playing????? I doubt that very much.
I do really like the pc-mobile handsfree which is retractable and handy.
Any alternative in the market?? You got the adaptor but I think its only good for audio MP3 listening. If you attach another headsfree to the adaptor for business use (don't know whether we can...), you will have 2 buttons (one for the adaptor and one for the handsfree) which is quite funny !
Does somebody else have this problem and find a solution?
Do most people use bluetooth?
*Damn* !
Been creating a cable myself, tried it yesterdaynight late....
The damn thing didn't answer the phone when i pressed te button.
I cut the audio-out cord and trew the cable away, because i tought the mic didn't work....
Now i read this.... Guess the mic did work, but the answerbutton didn't.
Now i hope i can rewire the audio-out cabels again, so i haven't been soldering for nothing last night
Headphone adapter for HTC magic
Hello.
On the HTC magic, there isnt a 2.5 or a 3.5 headphone jack! there is only a mini USB jack. Does anyone know where i could get a mini USB jack adapter to turn it into a regular headphone jack?
Even if anybody knows what kind of mini USB jack comes on the HTC then that would be lots of help! because ive already purchased one that fit, but didnt work so it must have been a different type.
Thanks in advance!
http://www.google.dk/search?hl=da&q=extusb+to+minijack&btnG=Søg&meta=&aq=f&oq=
What headphones do you guys use with your Treo 750?
At first, I just bought a 2.5mm to 3.5mm adapter and used any set of headphones but then became to cumbersome having to always unplug it to answer phone calls (especially in the cold).
So then I bought the Body Glove headphones with the 2.5mm jack but found out that only the right headphone works because the other signal is used for the mic! BUMMER!!!
So now, I'm to looking for another set of headphones that will work on the Treo 750. I want both right and left headphones to work and also have a working mic on it!
I might just get a bluetooth stereo headset and never have to worry about anything! But I just wanted to know what everyone else was using...
Thanks!
i bought a headset that had a 2.5 - 3.5 mm adapter and on the adapter itself was a button for switching b/w phone calls.
the other end was basically a jack for using any standard headphnes. so im some some sick in-ear ones taht have amazing bass (most of the regular phone headsets have sh!tty bass)
i would go w/ bluetooth but i dont know how much of a drain on battery they'd be. plus $$$.
mbk.2k3 said:
i bought a headset that had a 2.5 - 3.5 mm adapter and on the adapter itself was a button for switching b/w phone calls.
the other end was basically a jack for using any standard headphnes. so im some some sick in-ear ones taht have amazing bass (most of the regular phone headsets have sh!tty bass)
i would go w/ bluetooth but i dont know how much of a drain on battery they'd be. plus $$$.
Click to expand...
Click to collapse
Which headset/adapter is it?
im use old 2.5mm nokia's headset with handmade box>3.6 adapter with nokia's n73 headphones, quality normal, i listen music on max volume - bass on normal level and music are real stereo, im happy)
but i have one problem with headset - when phone rings, sound outs from headset and from phone, how turn off sound from phone when headset plugged in?
p.s. sorry for my english, im from uzbekistan
dubLeE said:
What headphones do you guys use with your Treo 750?
At first, I just bought a 2.5mm to 3.5mm adapter and used any set of headphones but then became to cumbersome having to always unplug it to answer phone calls (especially in the cold).
So then I bought the Body Glove headphones with the 2.5mm jack but found out that only the right headphone works because the other signal is used for the mic! BUMMER!!!
So now, I'm to looking for another set of headphones that will work on the Treo 750. I want both right and left headphones to work and also have a working mic on it!
I might just get a bluetooth stereo headset and never have to worry about anything! But I just wanted to know what everyone else was using...
Thanks!
Click to expand...
Click to collapse
I use an adapter from 2.5 to 3.5 and use a Creative headphones in order to listen music, sound is very good, but have no microphone, I'm thinking to buy a 2.5 headphone w/ mic, in my opinion a good brand should be the correct option, maybe somebody could tell us their experience.
Hi there. I hope someone will help me...Basically I need dictaphone for interviews so I bought "Olympus ME-52W Noise Canceling Microphone" and I tryied to use it with my htc hd 2. Phone is showing connected headphones but mic is not working. So my question is can I use external mic with my phone or is it related with software? If someone know the answere pls help me!!!!!!! btw I use Resco audio recorder
The problem is because the connector on the mic is probably the same as a mono headphone plug. The phone thinks that you have headphones plugged in. The phone has a socket that accepts 4 pole jack plugs. That is it requires a special plug that has contacts for both left and right audio as well as for the mic.
If you really want to use the mic I would go to somewhere like radio shack or mapplins and buy a 3.5 mm 4 pole jack plug and a couple of sockets. You could then wire up your own adapter to let you use the mic and also a pair of headphones or speakers at the same time. The pin out for the plug should be easy to find on the net and so long as you can solder I wouldn't see any problems.
Other than that plugging the mic directly into the phone will defiantly not work.
shut up stupid douche
I'm searching a cable/adapter with a mic and a 3.5mm jack where I can connect a classic stereo headphones.
The reason is to use my in-ear monitor (without mic) to answer to the calls when I'm listening music.
I've found this one:
www.ebay.com/itm/360528518602
Anyone I've tried it?
Do you know a similar connector working on the Samsung Ace (or Galaxy)?
Today I've received this adapter: it works fine and finally I can use my expensive in-ear monitors for both music and calls.