Database Develop

Temp root for apps required root access (for s-on IS)

Psneuter exploit is working on IS, but because /system is locked on s-on phones, we can't copy su and superuser.apk into /system, apps required root access can't work.
The following procedure uses psenuter exploit to gain adb shell root, and then copy su (without privilege control ) and busybox into /sbin (which is on rootfs and in the global PATH list) to gain root access for apps.
The procedure:
1. Unzip the attached .zip into a directory (like c:\adb)
2. Open a command prompt and cd to the directory where you extracted the .zip (like cd \adb)
3. run pushroot.bat (simply type pushroot)
4. adb shell /data/local/tmp/getroot
5. adb shell
6. you are now in # prompt. Type /data/local/tmp/pushroot
You have to redo steps 4,5,6 once you reboot your phone.
The procedure will have all apps gaining root access.
!!USE ON YOUR OWN RISK!!
Known working programs: Root explorer, Titanium backup, gscript lite, trasproxy 2.04, ...
Some apps check existence of su in /system/xbin , and reject to proceed if the su binary is not exist (like transproxy 3.08). For this kind of apps, this procedure won't help.

Nice but old news mate...
Sent from my HTC Incredible S using XDA Premium App

Good job...thanks

Thanks for writing this up, might quell the thirst for S-OFF a little longer

/system/ is writeable btw, if you remount it, but after reboot everything u done will be changed to the way it were before.
so a temp root in xbin is possible also, only it will be gone afterwards (atleast i never tried this, but should work also...)

Yes. /system could be remount in rw with root. However, the files you wrote will be gone after you remount ro, and then you won't be able to copy the same filename into the same location again before next reboot ( I don't know why, actually!!). This is why I put su in sbin instead of /system/xbin.

thanks to your files 非常感谢你的工作。

Does anyone know whether steps 4, 5 and 6 can be run from the device itself?
Can I put these commands into some sort of script and run it everytime I need temp root or would I need to do this from a computer every time?

faf said:
Does anyone know whether steps 4, 5 and 6 can be run from the device itself?
Can I put these commands into some sort of script and run it everytime I need temp root or would I need to do this from a computer every time?
Click to expand...
Click to collapse
I believe you can do it from a terminal emulator but haven't got the chance to try it myself though.
Sent from my HTC Incredible S using Tapatalk

pushroot error
c:/adb>adb shell ln /data/local/tem/busybox /data/local/tmp/cp
Link failed File exists
and
c:/adb>adb shell /data/local/tmp/getroot
mmap<> failed. operation not permitted
Why??THX....

itandy said:
I believe you can do it from a terminal emulator but haven't got the chance to try it myself though.
Sent from my HTC Incredible S using Tapatalk
Click to expand...
Click to collapse
Definitely, this is the way to go.
Unfortunately, the root exploit I know could run on device itself, including
rageagainstthecage (ratc) and local root exploit (hotplug) both failed on IS.
The solution will be nearly perfect if we can get temp root on IS without a computer link.
Any input will be welcome.

sky1212 said:
pushroot error
c:/adb>adb shell ln /data/local/tem/busybox /data/local/tmp/cp
Link failed File exists
and
c:/adb>adb shell /data/local/tmp/getroot
mmap<> failed. operation not permitted
Why??THX....
Click to expand...
Click to collapse
Please then type adb shell.
If you see # but not $, do
cd /data/local/tmp
rm ./cp
ln busybox cp
./pushroot
Then you finished the install.
If you see $, please do all over again.

You can also add ShootMe (screen capture app) and SetCPU to the list of working apps. SetCPU will only allow you underclock for now due to the kernel, but it is a nice touch if you are worried about battery life. Adfree doesn't appear to work

l0st.prophet said:
You can also add ShootMe (screen capture app) and SetCPU to the list of working apps. SetCPU will only allow you underclock for now due to the kernel, but it is a nice touch if you are worried about battery life. Adfree doesn't appear to work
Click to expand...
Click to collapse
Adfree is working for me. Are you getting some type of error message?
MetaMorph, screenshot and MyBackup Root are also working.
I had to mount system, then push su to /system/xbin. Then install BusyBox Installer from Market.

No erro, still got the ads. I've tried rebooting & rerooting, still no luck

l0st.prophet said:
No erro, still got the ads. I've tried rebooting & rerooting, still no luck
Click to expand...
Click to collapse
What site/app are you going to so I can see if I get the ads.

the anti-ads actually tries to modify the current host file... which is not allowed in your state as far as i know
what you can do is replace it by pushin it to the right spot
but after reboot gone,but sure u know

Adfee is working for me, you can also add Droidwall.

@eddycyf, did you test adfree with apps? Since it aint working for prophet...
Sent from my HTC Incredible S using XDA Premium App

Mhm AdFree isnt working for me. The App states that everything is okay, and that my hosts file is up to date, but I see ads everywhere.
But I am kinda happy now, because i can use Titanium Backup

Root instructions...

Originally posted by Stetsonaw at androidforums...
Please be aware that I did not write these instructions. I only posted them. Stetsonaw wrote these instructions. While comfortable in ADB and have rooted my phone many times in testing as well as rolled back the versions etc... I have no more insight into how or why it is not working for you. If you followed the directions exactly on a version 4 phone, this should work no problem.
Haxcid
Links to the necessary files are listed at the bottom.
Remember, I am not at fault if you brick your phone, now, proceed.
Connect your phone in charge only mode to install the LG Bootstrapper and drivers, or grab the LG Universal Drivers.
Change your USB Mode to Internet Connection
Go into Settings/Applications/Development and ensure USB Debugging is turned on
If all goes according to plan, you should see the ADB Ladybug icon in your notification bar
I updated the Rootzwiki page with the same info found below.
Busybox actually comes installed by LG on the Revo, how awesome is that??
Download the rageagainstthecage binary
Download the SU binary
Move these files to the same directory your adb.exe is in.
Code:
The > and # characters below illustrate the prompt
you should have, if you have the $ when you go into adb shell,
exit out and type 'adb usb' then go back into adb shell and
you should see the #
Open Command prompt (either use the Windows Key+R and type cmd or start/run, then type cmd)
32-bit users: >cd c:\program files\android\android-sdk\platform-tools
64-bit users: >cd c:\program files (x86)\android\android-sdk\platform-tools
Or >cd (whatever directory adb is in)
>adb devices (verifies you are connected)
>adb push rageagainstthecage-arm5.bin /data/local/temp/rage
(if the above command fails due to read-only, type 'adb usb' then 'adb root' to validate root status, then 'adb devices' again to verify connection)
>adb push su /data/local/temp/su
>adb shell chmod 777 /data/local/temp/rage
>adb shell ./data/local/temp/rage
>adb shell (If this gives you a $ prompt instead of a # prompt, type 'su', if that fails, 'exit', 'adb usb' like above.)
#mount -o remount,rw -t ext3 /dev/mmcblk0p12 /system
#busybox cp /data/local/temp/su /system/bin/su
#chmod 6755 /system/bin/su
Verify the file is in place w/correct permissions
#cd /system/bin
#ls -l *su
After the ls command you should see the following returned by the system:
-rwsr-sr-x root root 26248 2011-05-29 01:09 su
At this point, you may way to remove the files you put in /data/local/temp (optional):
#rm /data/local/temp/su
#rm /data/local/temp/rage
continue with commands
#reboot
Download and install SuperUser from the Market
Thanks Zennmaster, _mrbirdman_ for finding the linux routes and birdman for helping me out, and droidx8971 for helping me find all the information possible!
http://wikifilez.com/Root Files/revolution/rageagainstthecage-arm5.bin
http://wikifilez.com/Root Files/revolution/su
https://market.android.com/details?id=com.noshufou.android.su&feature=search_result
http://www.lg.com/us/support/mc-support/drivers/LGAndroidDriver_Ver_1.0_All.exe

Just a note for some. The rageagainstthecage bin file may be detected as a virus/trojan. It is not. You may want to disable your antivirus before downloading the .bin file.
I run avira on my desktop and it caught the file as a virus everytime I downloaded it and then deleted it. Avast on my laptop however did not.
Root is simple if you follow the instructions. You need to make sure that adb recognizes your device. Takes 5 minutes to complete, took me longer to install adb again and update it.

Any reason to not use the one click method? Seems to be working

bwhxeon said:
Any reason to not use the one click method? Seems to be working
Click to expand...
Click to collapse
No idea. I have not used the one click. Create a thread for it. I posted what I know which is adb.

Successfully Rooted
with RootzWiki instructions for Windows, needed the remount and busybox lines to overcome the permission denied when pushing su.

Hey guys, either using S1C or ADB Commands, have we found out if it's possible to unroot this as long as you Nand Backup the stock rom then unroot from there yet? Just because I got this phone as a filler/4g unl. lock and got buyback on it from best buy so I could buy a dual/quad later on when they come out .

MXFrodo195 said:
Hey guys, either using S1C or ADB Commands, have we found out if it's possible to unroot this as long as you Nand Backup the stock rom then unroot from there yet? Just because I got this phone as a filler/4g unl. lock and got buyback on it from best buy so I could buy a dual/quad later on when they come out .
Click to expand...
Click to collapse
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.

Haxcid said:
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.
Click to expand...
Click to collapse
Oh ya I know, I just always keep a stock one, on the Inc if you factory reset from an AOSP rom, you'd bootloop, so you had to make sure you were on a Sense 1.0 or stock rom(from my experience), so I was just making sure it was no big deal to go back.
Any idea when we will have cw on this?

Haxcid said:
Doing a factory reset I believe will unroot you. There is no nand back up at this time. We are waiting for a recovery mod.
Click to expand...
Click to collapse
I tried the factory reset. I am still rooted.

navycow said:
I tried the factory reset. I am still rooted.
Click to expand...
Click to collapse
That's what i figured. Can anyone verify if you remove SU and Rage through adb will it unroot?
Sent from my VS910 4G using XDA Premium App

MXFrodo195 said:
That's what i figured. Can anyone verify if you remove SU and Rage through adb will it unroot?
Sent from my VS910 4G using XDA Premium App
Click to expand...
Click to collapse
If you have to return your device, simply remove the superuser app, after you unfreeze anything you may have frozen then factory reset. They honestly will never know it was rooted. The only way now that you can really tell is the super user app from market.

Just so everyone knows. SuperOneClick can root and unroot this phone ok.

navycow said:
Just so everyone knows. SuperOneClick can root and unroot this phone ok.
Click to expand...
Click to collapse
Thank you for confirming this. My revolution just came in the mail today!

Thanks for posting this here for me Haxcid!
Sent from 1885

navycow said:
Just so everyone knows. SuperOneClick can root and unroot this phone ok.
Click to expand...
Click to collapse
Cool thanks for checking. Any benefits for ADB over S1C? Can't wait to finally root and freeze half these apps. I think we need a few more twitters to praise koush for a recovery on this beast.
Sent from my VS910 4G using XDA Premium App

Is there recovery for this now? Did I miss something?

stetsonaw said:
Is there recovery for this now? Did I miss something?
Click to expand...
Click to collapse
No No, I was saying we need to praise Koush's good work so he will make one faster .
And Stetsonaw, any idea if I root through ADB, can I unroot with S1C, since it uses the same idea.
S1C for whatever reason will not run(tried three computers, a XP, Vista, and Win7 lol), it keeps freezing at the same spot, everytime.

Should be able to, since S1C does what the ADB method does... or you could just delete the 'su' file out of /system/bin and /system/xbin (if it's there) to unroot.
EDIT: I couldn't get S1C to open on my desktop, and my laptop, which would open the program, would bluescreen when i connected the phone, so i had no choice but to do it the ADB way.

stetsonaw said:
Should be able to, since S1C does what the ADB method does... or you could just delete the 'su' file out of /system/bin and /system/xbin (if it's there) to unroot.
EDIT: I couldn't get S1C to open on my desktop, and my laptop, which would open the program, would bluescreen when i connected the phone, so i had no choice but to do it the ADB way.
Click to expand...
Click to collapse
Hmmm, ya now my computer for whatever reason won't open up ADB through command. This is getting irritating lol. Should be nice and simple, but it just won't go through. If I downloaded the SDK Manager like 4 months ago, it shouldn't matter, correct?

make sure you change directory to wherever your adb.exe is located... as in:
Code:
cd C:\Program Files\Android\android-sdk-windows\platform-tools

[HOWTO] Root HKTW 2.3.4 - The easier way

I don't know if I am the only one who realized there's su binary already in the build. Anyway, this is a shorter route to have root working on your phone. This only works with the HKTW 2.3.4 build! And this instruction have only be tested by me. So, do take precautionary measures.
DOWNLOAD: http://dl.dropbox.com/u/6418171/SuperUser.zip
INSTRUCTIONS:
1. Extract the zip to your internal storage (i.e. /sdcard)
2. Get into the phone shell i.e.
adb shell
Click to expand...
Click to collapse
3. Then, type and press enter:
su
Click to expand...
Click to collapse
4. Lastly, copy and paste these whole chunk to your phone shell and press enter:
mount -o remount,rw /dev/block/mmcblk0p12 /system && cp /sdcard/SuperUser/su /system/bin/su && chmod 6755 /system/bin/su && cp /sdcard/SuperUser/SuperUser.apk /system/app/SuperUser.apk && mv /system/xbin/su /system/xbin/dosu
Click to expand...
Click to collapse
If there's no error with the output, you should have root access on your phone now. Tada! Do report of this works for you!

Will try and report if it works or not
Sent from my MB860 using XDA App

Well I know I shouldn't say it here...
But is the HKTW rom blurred or blurless?

Different kind of blur but its still blur
Sent from my MB860 using XDA App

Do you mean Blur 4.5?

I don't know what its called lol
Sent from my MB860 using XDA App

Trying it out now. Will report back.
And this has Blur on it. It's not a custom ROM.

Anyone else experiencing issues getting their phone recognize by adb
Sent from my Atrix 4g Ubl 2.3.4

su is throwing me a permission denied
http://pastebin.com/brXVEYDb

i guess i didn't phrase the instruction clearly. sorry. just edited first post.. reread everything and try again.

had to run it a few times.. but it worked! thx!

Works! 10char

reserved *10chars

su: not found
For some reason USB debugging does not seem to be working properly, even with stay awake checked.
EDIT:
An even easier way.
I decided to run beforeupdate.bat and afterupdate.bat and was able to successfully gain root access on hktw-2.3.4.

jimmer411 said:
su: not found
For some reason USB debugging does not seem to be working properly, even with stay awake checked.
EDIT:
An even easier way.
I decided to run beforeupdate.bat and afterupdate.bat and was able to successfully gain root access on hktw-2.3.4.
Click to expand...
Click to collapse
having the same issue with SU

Are there any other alternatives to root currently?

jimmer411 said:
su: not found
For some reason USB debugging does not seem to be working properly, even with stay awake checked.
EDIT:
An even easier way.
I decided to run beforeupdate.bat and afterupdate.bat and was able to successfully gain root access on hktw-2.3.4.
Click to expand...
Click to collapse
Can you be more specifically on those files? Where to download and how exactly did you go about running those files?

Do I need the SDK for rooting it?

THIS WORKS ON WINDOWS, OSX, AND LINUX
once you type in adb shell then type dosu instead of su and see if that helps

I get an error at the last part when I put it in cmd
Whenever I type in 'su', I get permission denied - and dosu doesn't work either.

About flash CMW V20A

Hello,
I had posted this in Frequently Asked Questions about the LG Optimus 4x HD but got no help so I post here for a last try.
Just followed all dexter's steps in this thread to flash CMW
http://forum.xda-developers.com/showthread.php?t=2180138
but I got stuck here. Tried to read 34 pages of the thread but still couldnt solve my problem
My LG was rooted and unlocked.
Any help? thanks
Ekio

The error message says it all: no such file or directory. Change /mnt/sdcard/ to /storage/external_SD/

AlderCass said:
The error message says it all: no such file or directory. Change /mnt/sdcard/ to /storage/external_SD/
Click to expand...
Click to collapse
Tried and still not such files and directory thx anyway

ekiong said:
Tried and still not such files and directory thx anyway
Click to expand...
Click to collapse
Are u sure, u have copied the neede files to the root of ur SD-Card? Seems not... U have to unpack the zip-files for CWM and copy both files to the root of ur SD-Card... After that the commands should work...

Bogeyof said:
Are u sure, u have copied the neede files to the root of ur SD-Card? Seems not... U have to unpack the zip-files for CWM and copy both files to the root of ur SD-Card... After that the commands should work...
Click to expand...
Click to collapse
Omg I already did
Look pics

ekiong said:
Omg I already did
Look pics
Click to expand...
Click to collapse
I needed to allow SuperSU access before I be able to do it...
Pay attention to your phone, when you give the command "adb shell", if Superuser/SuperSU don't ask permition.
Its just a idea...

RuedasLocas said:
I needed to allow SuperSU access before I be able to do it...
Pay attention to your phone, when you give the command "adb shell", if Superuser/SuperSU don't ask permition.
Its just a idea...
Click to expand...
Click to collapse
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"

ekiong said:
Omg I already did
Look pics
Click to expand...
Click to collapse
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/ , ie:
Code:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
Code:
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
*edit*
ooops didn't look at all the screenshots. The last one shows your SD card path actually is indeed the same as mine. I'm all out of ideas then.
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
ekiong said:
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"
Click to expand...
Click to collapse
Did you do it in recovery mode from the start? When I did it it was when the phone was just switched on normally into the main OS.

ekiong said:
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"
Click to expand...
Click to collapse
AlderCass said:
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/ , ie:
Code:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
Code:
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
*edit*
ooops didn't look at all the screenshots. The last one shows your SD card path actually is indeed the same as mine. I'm all out of ideas then.
Click to expand...
Click to collapse
Where the hell did you found that path /mnt/sdcard/....... ???

Tutorial CWM
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
1. Unlock Bootloader and get SU Permissions
2. Go to PlayStore download SuperSU and than start give permisions to it to update Binary , than go to Setting in SuperSU and install in System
3. Reboot Phone
4. Copy the 2 IMG data to root from SD and rename recovery-6028.img > recovery.img & unsecure-boot-mmcblk0p2.img > boot.img
this to IMG data must be unpacked from RAR(Zip) from Dexter.
5. make sure you have Unknow Sources and USB Debug Active , and also make sure that Superuser is replaced by SuperSU after reboot
6. Go to PlayStore and Download Android Terminal Emulator
and give in Terminal
Type "su" without quotes and than accept the permissions from SuperSU after that give in
----------------------------------------------------------------------------------------------------------------------------------
cat /mnt/sdcard/recovery.img >/dev/block/mmcblk0p1
sync
IF YOU USE UNSECURE BOOT tha use this
su
cat /mnt/sdcard/boot.img >/dev/block/mmcblk0p2
sync
Hope it helps and youv got it run :laugh:

RuedasLocas said:
Where the hell did you found that path /mnt/sdcard/....... ???
Click to expand...
Click to collapse
It's in the system root for me, it's a symlink. Though it didn't work for me in the cat command, which is why I suggested using /storage/external_SD/ instead which did work for me. It looks like the OP has the files in the right places, and the hash in the command line screenshot implies that SU is working correctly, so I'm all out of ideas now.
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
x0BlackTeresis0x said:
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
Click to expand...
Click to collapse
Little bit arrogant, we're all trying to help here, so I hope for your sake your way works for the OP

AlderCass said:
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
Click to expand...
Click to collapse
Sorry man, just had a bad feeling .
--------------------------------------------------------------------------
x0BlackTeresis0x said:
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
1. Unlock Bootloader and get SU Permissions
2. Go to PlayStore download SuperSU and than start give permisions to it to update Binary , than go to Setting in SuperSU and install in System
3. Reboot Phone
4. Copy the 2 IMG data to root from SD and rename recovery-6028.img > recovery.img & unsecure-boot-mmcblk0p2.img > boot.img
this to IMG data must be unpacked from RAR(Zip) from Dexter.
5. make sure you have Unknow Sources and USB Debug Active , and also make sure that Superuser is replaced by SuperSU after reboot
6. Go to PlayStore and Download Android Terminal Emulator
and give in Terminal
Type "su" without quotes and than accept the permissions from SuperSU after that give in
----------------------------------------------------------------------------------------------------------------------------------
cat /mnt/sdcard/recovery.img >/dev/block/mmcblk0p1
sync
IF YOU USE UNSECURE BOOT tha use this
su
cat /mnt/sdcard/boot.img >/dev/block/mmcblk0p2
sync
Hope it helps and youv got it run :laugh:
Click to expand...
Click to collapse
Tried and looked like I'm typing in word lol, nothing happen, still android system recovery, not CMW.
Need CWM to wipe battery status, battery goes down to 93% in 1 min after full chagring.

ekiong said:
Sorry man, just had a bad feeling .
--------------------------------------------------------------------------
Tried and looked like I'm typing in word lol, nothing happen, still android system recovery, not CMW.
Need CWM to wipe battery status, battery goes down to 93% in 1 min after full chagring.
Click to expand...
Click to collapse
Remove micro sd from the phone.
Stick to the guide, pay atention to the phone screen behavior soo, keep the screen always on, in case of SuperSU ask for permition...
Dexter_nlb said:
......
GUIDE:
1. when you are running unlocked bootloader and is rooted goto step 2.
2. download attached zip files and extract content to internal sdcard location
3. use adb shell or terminal from market and execute the commands below
4. you are now running with native CWM recovery and unsecure boot, which enable adb root at boot instantly.
5. boot into recovery, by rebooting device and hold VOL-DOWN during bootup. (from power-off = keep holding vol-down during power on)
execute these 3 commands for recovery image install
Code:
su
cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
execute these 3 commands for unsecure boot image install
Code:
su
cat /mnt/sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
or see screenshot here
do this at your own risk, and do NOT try this on old 4.0.3, which is not with unlocked bootloader, and you are required to install KDZ again.
THANKS to:
skydev - for his continued effort in finding root and giving our device full freedom with boot/recovery.
Click to expand...
Click to collapse
Copy and past the command lines from the post, like that you'll be sure that you don't miss write the path.
And like I use to say, be creative
Good luck !

RuedasLocas said:
Remove micro sd from the phone.
Stick to the guide, pay atention to the phone screen behavior soo, keep the screen always on, in case of SuperSU ask for permition...
Copy and past the command lines from the post, like that you'll be sure that you don't miss write the path.
And like I use to say, be creative
Good luck !
Click to expand...
Click to collapse
Still no such file, I give up :angel:
Thx every one

ekiong said:
Still no such file, I give up :angel:
Thx every one
Click to expand...
Click to collapse
You tried this? Only the path changes, but... I ran out of ideas.
Like I told you, be creative. Change /sdcard/ to /sdcard0/... don't know man...
"01. You must have Root access (https://mega.co.nz/#!0opzyBjS!DSoW-CaTRi49JcW58yvwCCEug4hz6VmnevdJ1prcdpE)
02. Extract both *.img files somewhere
03. Copy those files to your phone (no matter if internal or external storage, I used /sdcard/Unlocking/ so below commands will contains my directory)
04. Run terminal app on your phone or adb shell from PC while you have connected phone
05. Run those commands:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p1
sync
REMEMBER!
If your folder is different than /sdcard replace it in those commands above!
Methods and necessary files are found also here: http://forum.xda-developers.com/showthread.php?t=2180138
All credits goes to Dexter_nlb from xda community."

RuedasLocas said:
You tried this? Only the path changes, but... I ran out of ideas.
Like I told you, be creative. Change /sdcard/ to /sdcard0/... don't know man...
"01. You must have Root access (https://mega.co.nz/#!0opzyBjS!DSoW-CaTRi49JcW58yvwCCEug4hz6VmnevdJ1prcdpE)
02. Extract both *.img files somewhere
03. Copy those files to your phone (no matter if internal or external storage, I used /sdcard/Unlocking/ so below commands will contains my directory)
04. Run terminal app on your phone or adb shell from PC while you have connected phone
05. Run those commands:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p1
sync
REMEMBER!
If your folder is different than /sdcard replace it in those commands above!
Methods and necessary files are found also here: http://forum.xda-developers.com/showthread.php?t=2180138
All credits goes to Dexter_nlb from xda community."
Click to expand...
Click to collapse
OH MY GOD I'm stupid, I copied files with ZERO byte.
sorry I used airdroid to copy them to my phone. But only their icons moved into my phone, not contents.
It works now THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS :laugh:
Close thread and my stupid problem :silly:

Now What?

Now that we have root, what things are we going to be focusing on next? Probably Safestrap and ROMs. What cool things have you guys found with root?

Vlasp said:
Now that we have root, what things are we going to be focusing on next? Probably Safestrap and ROMs. What cool things have you guys found with root?
Click to expand...
Click to collapse
Well for one thing if you disabled/uninstall Unified Search, it allows google search to work correctly in the launcher, also without root you can replace the amazon keyboard with the google keyboard and get voice search.
Edit: We need to probably install Google play services properly to get Google Play Games to work correctly but I am not sure.

The ability to install apps depending on root is awesome.
If you are asking for wishes, then I wish I could use CyanogenMod on this device.

I have de-amazonified my tablet a bit. Cant wait to get a custom rom installed on it though.

we need a safe list with what apps can we delete... i did the same but i don't know for sure what to delete and what to keep... i mention that i don't use amazon apps nor i logged in..
Sent from my KFFOWI using XDA Forums

balanigga said:
we need a safe list with what apps can we delete... i did the same but i don't know for sure what to delete and what to keep... i mention that i don't use amazon apps nor i logged in..
Sent from my KFFOWI using XDA Forums
Click to expand...
Click to collapse
For the moment......
http://forum.xda-developers.com/showpost.php?p=63605889&postcount=77
If wants to remove more can give chmod 000 to apk & reboot before delete

What about reassigning the home button to a different launcher?

xT29c said:
What about reassigning the home button to a different launcher?
Click to expand...
Click to collapse
Just install another launcher and remove FireLauncher from system.

csolanol said:
Just install another launcher and remove FireLauncher from system.
Click to expand...
Click to collapse
Oh, nice. Okay, thanks!

csolanol said:
Just install another launcher and remove FireLauncher from system.
Click to expand...
Click to collapse
how can i do this? thanks in advance
Edit: nevermind I found it, thanks anyway

joelwylde said:
how can i do this? thanks in advance
Click to expand...
Click to collapse
You can use titanium backup, and remove it like that. I would make a backup firs though just in-case.
Also, I need help trying to unhide the firelauncher process. I have the command here "adb shell pm unhide [package:com.amazon.firelauncher]"
But I need the other command first so ADB can talk to my tablet. Because I ran the command, and it just says "true" when it should say "false".

joelwylde said:
how can i do this? thanks in advance
Click to expand...
Click to collapse
Working Launcher replacement thanks to @diegocr and @Awesomeslayerg ! Here's the steps:
1. See @diegocr post at http://forum.xda-developers.com/showpost.php?p=63599598&postcount=23 and download "boot-firelauncher.img"
2. Enable USB debugging
3. Install your launcher of choice!
4. On your computer, run
adb reboot bootloader
Click to expand...
Click to collapse
5. Once your tablet reboots in to fastboot, run on your computer (if you are not in the same directory as boot-firelauncher.img, put the full path):
fastboot boot boot-firelauncher.img
Click to expand...
Click to collapse
6. Tablet will reboot
7. Once booted open an adb shell:
adb shell
Click to expand...
Click to collapse
8. To back up the existing app, run:
cp /system/priv-app/com.amazon.firelauncher/com.amazon.firelauncher.apk /sdcard/Download/com.amazon.firelauncher.apk
Click to expand...
Click to collapse
9. Then nuke it!
rm /system/priv-app/com.amazon.firelauncher/com.amazon.firelauncher.apk
Click to expand...
Click to collapse
10. Now, run to restart your device:
reboot
Click to expand...
Click to collapse
Confirmed working on my tablet with FireOS 5.0.1.
Enjoy!
Forget all the formatting problems
Sent from my KFFOWI using Tapatalk

If you are already rooted you don't need to do all that stuff.
Just adb shell
su
mount -o remount,rw /system
rm -r /system/priv-app/com.amazon.firelauncher or whatever the package is called.
Reboot and it's done.
Remember to install a launcher before this.

csolanol said:
If you are already rooted you don't need to do all that stuff.
Just adb shell
su
mount -o remount,rw /system
rm -r /system/priv-app/com.amazon.firelauncher or whatever the package is called.
Reboot and it's done.
Remember to install a launcher before this.
Click to expand...
Click to collapse
Will this work if I hid the process with ADB before hand? If not, how do I unhide it? What command would I use before "adb shell pm unhide [package:com.amazon.firelauncher]"

Don't know, try if it works hiding, but I doubt it.

I want to replace the hosts file with the one of my Lenovo S660 (China phone). The S660 hosts file is about a mile long and has entries like "0.0.0.0 bad.ad.server" - a very basic but effective way to avoid a lot ads, even at apps. I have not yet took a closer look but I think I would create a mix of both files for the fire.
So, what are the steps?
I have done similar things to my rooted Sony Experia Tipo concerning modifying files at /system, which is mounted RO as default. So I remounted it RW with ES-Explorer, modified what I had to and mounted RO with ES-Explorer again.
I wonder, if this is ok, because of the security means the fire/android has.

I took a chance and I was successfull.
I attached the unchanged hosts file from my Lenovo S660 /system/etc/ as hosts.lenovo.zip file. The fire hosts has just 1 line: 127.0.0.1 localhost. The lenovo's hosts has 25858 lines.
Code:
- unzip hosts.lenovo.zip -> you get host.lenovo
- rename hosts.lenovo to hosts
- connect fire
- adb push hosts /data
- adb shell
- $ su -
- # cd /data
- # chmod 644 hosts
- # exit
- $ exit
- ES Explorer
- Enable root explorer
- remount /system rw
- go to /data
- mark hosts
- cut hosts (to memory)
- go to /system/etc
- mark hosts
- rename hosts to hosts.old
- insert hosts from memory
- remount /system ro
- exit ES Explorer
done.
should work, use at own risk.
Note: You cannot chmod 644 at /mnt/sdcard1 because it is vfat there, that's why you use /data.
Note: You cannot write to /system/etc while at adb shell, even if it is mounted RW, that's why you have to use ES Explorer which will ask you to choose the path with android overlay window - which makes it work (at least my experience).
If you have apps which showed ads before, then you might keep on seeing the very last forever. Or a broken link sign. Or even a popop with broken link sign. Or your ads hosts is missing at the lenovo hosts file and you keep on seeing ads. There even my be websites you cannot visit anymore - which I have not yet experienced, but the risk exists, or will come.
If interested, take a look at http://winhelp2002.mvps.org/hosts.htm for more information and use for your windows or linux pc.
If you don't like it you can go back, you have a copy of your old hosts file.

I want to replace the hosts file with the one of my Lenovo S660 (China phone). The S660 hosts file is about a mile long and has entries like "0.0.0.0 bad.ad.server" - a very basic but effective way to avoid a lot ads, even at apps.
Click to expand...
Click to collapse
Check out the adaway app (open source). It blocks ads through the host file just like you're doing except it puts the host file in place for you, combines host files from a couple different sources (running de-duplication on them) & auto updates your host file as new ad severs are added or removed. Absolutely beats rolling your own host file manually.

That is new information to me, thanks.