[Q] Any custom ROMs which disable fully charged vibration? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

After reading several other threads created to ask this specific question and trying most if not all of the offered solutions, I am resigned to the fact that a custom ROM may be the only way to disable the 100% battery charged notification.
Has anyone currently got a Note which does NOT vibrate/screen on when it reaches 100% charge? What was the solution? Custom ROM/app/decompiling systemui.apk?
Thanks.
PS. FYI 'Battery Charged Silencer' app does not currently work for Note, Tasker can only set 'silent' etc which does not affect it, and I do not want to buy a seperate alarm clock..

Mine Note never vibrate or sounds or give any notification when its fully charged.
I have to check it for myself, too see if it fully charged on the lockscreen.
Maybe theres a setting to enable/disable it then? Since mine never do that when its fully charged.

It does it. If you wait 30~ minutes after it reaches 100%, it will do it. There is no default setting to switch it off. I thought I had solved it last night by actually leaving the screen on absolute minimum, but it just takes longer to reach 'fully charged' state.
Any ideas or solutions would be great as it is driving me crazy.

It does. This vobrating crap wakes me every noght! Even if I dont charge it, it vibrates when battery is low. Very stupid that you cant turn it off.
Ive been looking for this functiok also. Badly!

Amazed there isn't any solution for this yet. For the time being I have reluctantly brought my W610i out of retirement to serve as an alarm clock.
Now I take two devices into the shower instead of just one.

I finally stumbled across the solution to this last night. You need to move the 'haptic feedback' slider all the way to the left in sound->vibration intensity. Having the other sliders down on their own isn't enough, but disabling haptic feedback stops the vibrate notification.
You can then use Tasker or other similar tool to suppress the 'screen on' notification.

Related

lost half my battery over night

I fully charged my hd7 just before going to bed last night, i then did not touch anything on my phone just put it down and 8 hours later my alarm rings and i go to turn it off and noticed my battery was only half full. Does anyone know a way to check what is using the battery as i have not idea what it could be. Is it possible MS push updates at night? or is it more likely something wrong? I have been getting a day out of a charge with playing games and internet etc but this was doing nothing screen turned off no calls.
Have you changed any update settings? I've left my update frequencies as standard and seem to be doing fine.
How many power cycles has the battery had, as they seem to take a few charges to settle down.
this would of been number 4 so it could be that, the only thing new i added from the last charge that seemed fine was the htc hub so i have uninstalled that and hopefully i may have found the culprit.
Disable feedback as it can use the mobile data.
Disable update checking over mobile data.
Set email to download periodically rather than "as items arrive"
I have no idea if these will help and seriously doubt they will. I have just set these options myself after completely draining my battery in 14 hours of reasonably heavy usage. Fingers crossed.
I had a similar problem. I then realised that the speaker was hissing as though an application was still running. Don't know how to stop apps running so took battery out. Replaced it and seems to be ok now.
When you turn the phone off the speaker seems to be on for a little while afterwards. I keep checking to make sure it goes off now.

[Q] Remove Battery Full Visual Alert

Hello. Has anyone figured out a way to remove the battery full visual alert? I use Timeriffic to remove the audio notification. I have a Samsung Dock and insert my phone into it every night when I go to bed. This puts the phone into DeskHome mode which I like. Then, in the middle of the night, when the battery gets to a full charge it shines like a beacon and stays on until I click the button to shut it off. My wife usually gets mad and flips the dock over. So my question is.... Can I turn off the visual notification of a full battery? Or make it so it doesn't kick my screen on and keep it on? I am not concerned about leaving my phone on the charger all the time and I am not worried about the audio notification.
It's possible, but...
Yes, it's possible to eliminate the popup notice & sound effect. However, it's very complicated to say the least. It involves editing the services.odex and android.policy.odex files.
What I haven't been able to do is track down what exactly causes the LCD to come on when the battery is fully charged. If I could figure that out, I could totally eliminate the whole thing.
FYI: It's the DeskHome app that keeps the screen on once the "battery is fully charged" notice is sent through the OS. If you don't have that app running, the screen would come on, then go off just as though you hit the power button but didn't unlock the screen.
Thanks! I tried that last night (not running DeskHome) and it worked! I would love to be able to have more control over deskhome to eliminate the full battery alert, but oh well.

[APP][MUST ADD2ROMS] NoMoarPowah!

repost kinda sure but in case you didnt see
NoMoarPowah!
http://www.xda-developers.com/android/replace-your-samsung-devices-charging-screen-with-nomoarpowah/
i just tested and confirmed it works. now heres my question, WHY THE HELL AINT THIS BUILT INTO AND THEMED FOR OUR FRIGGIN ROMS"?
this is awesome, in case you didnt know the phone charges faster while OFF. this changes the OFF charging screen and also has a settings app with the options to:shut down charge to 100 and reboot, or charge to 15% and reboot
shut down and charge, reboot at a certain time or 5 minutes before the system alarm time~!
note yes the free version is ad supported (in settings not charging screen!) and yes adblocking DOES work.. so.. FREE.
or make our own "based on the idea" and custom theme it for each rom. the charging screen could use visual improvement for sure but the options are great.
I came across this a cpl a days ago but didn't knew if it would work on the cappy, so thx for confirming
I started using this and noticed that when I set a time for my phone to wake up, it would stop charging. I woke up to it at 70%. Just wondering if anyone had experienced something similar.
Used it last night and it woke up just before the alarm. Only thing is that is notifies me about the emails overnight just before the alarm. Which stands to reason...emails collect overnight, phone is off...phone turns on and goes nuts with the notifications. Phone was charged to 100%, but I was woken up just before the alarm with a blast of email notifications.

Gear S2 battery issue, drain in OS but when docked shows 60%

My Gear S2 operates as normal as it should, however even at idle, the battery drains rapidly. Once the unit is completely dead, I then dock it and it will say 60% charge, which I know is wrong given that the unit will not power on undocked, meaning the battery had been completely depleted. Unit charges normally but I think a bug is preventing it from reaching actual 100% since it believes 0% to be 60%. Is there a way I can fix this without tearing apart the unit or replacing the battery?
same issue
I'm having the exact same issue, did a factory reset today updated all apps still same. I use a basic watch face, turn brightness to 2, everything off except Bluetooth and can get about a day of use . Is anyone else having this issue and has a solution?
Battery dead
So update on this issue, (on the Gear App on the phones most updated version) I went to the basic watch face in gray scale, then turned off all notifications, under gear connection, I unchecked sync wi-fi profiles, and under about gear I unchecked marketing information. I'm not sure which of those if any made the difference but at the end of day one 16 hours of use I was at 70%. So on the second day I tried a colorful watch face with animations, and 16 hours in I was at 63%. So one of those changes I made may have fixed my issue.
I did uninstall and reinstall the app on the phone, as well as reset the watch itself, neither seemed to work until I did the above changes. Hopefully that will help someone, or at least help to find out what is causing the massive battery drain.
dbrothers1 said:
So update on this issue, (on the Gear App on the phones most updated version) I went to the basic watch face in gray scale, then turned off all notifications, under gear connection, I unchecked sync wi-fi profiles, and under about gear I unchecked marketing information. I'm not sure which of those if any made the difference but at the end of day one 16 hours of use I was at 70%. So on the second day I tried a colorful watch face with animations, and 16 hours in I was at 63%. So one of those changes I made may have fixed my issue.
I did uninstall and reinstall the app on the phone, as well as reset the watch itself, neither seemed to work until I did the above changes. Hopefully that will help someone, or at least help to find out what is causing the massive battery drain.
Click to expand...
Click to collapse
With all that I have done with my gear, most I was able to get was about 10 hours. Though today it did to something odd. It died completely like it normally does, (it dies anywhere between 3-10% ish, and when it does die, its completely dead) so I placed it on the dock. Two minutes later I check and it reports 34%, "thats odd" I think to myself so I undock it and power it up thinking I would get no more than 5 minutes battery life on it since it couldnt possibly have that much charge in two minutes. I also expected it to report a low percentage but it didnt. I placed it back on my wrist and it continues to run about 10 minutes later down to 25% and still going! I find it odd. My current leakage issue I think remains and might be why the watch doesnt last as long. I might end up getting a new battery and see. My top battery user: watch faces at ~45%, even if the face hardly came on, and I am using one with a custom background that is mostly pure black.
Drain
That does sound pretty weird. I had a custom watch face installed "Mr Time" and started with a brand new install and I'm slowly adding things back in.
I would suggest a fresh install of the phone app, and the watch, using the classic face black and white. If you can get similar results to what I have then one by one start customizing it. I tried a lot of things to get it to work, over several days and that's what worked for me. I even uninstalled all of the watch faces I want using from the app"i felt that Mr time was still running in the background, even though it probably wasn't.
Good Luck

Limit Battey Charge % Android 11

Anyone found a consistent way to limit battery charge % on Android 11? The custom settings I used with Battery Charge Limit app on 10 work intermittently on 11. Often times I'd wake up to 100% charge.
Currently I'm using Advanced Charging Controller magisk module with it's accompanying AccA app but often AccA gets killed in the background even after not optimizing it in battery optimization. The only workaround I've found is to create a macro that opens AccA every time I plug in the charger. With that step it's consistent but I'd like to find something not so hacky.
I've been running A11 for about a week and did not encounter any issues with Battery Charge Limit. Maybe make sure that it's not battery optimized? I have it "not optimized" because I'm paranoid about it, rather than having direct problems.
jljtgr said:
I've been running A11 for about a week and did not encounter any issues with Battery Charge Limit. Maybe make sure that it's not battery optimized? I have it "not optimized" because I'm paranoid about it, rather than having direct problems.
Click to expand...
Click to collapse
I made sure battery charge limit wasn't optimized. You're using the same custom setting from android 10? Maybe I'll try it again
This the settings you have?
Path Data: /sys/class/power_supply/charger/charge_disable
Enable Value: 0
Disabled Value: 1
hawkswind1 said:
I made sure battery charge limit wasn't optimized. You're using the same custom setting from android 10? Maybe I'll try it again
Click to expand...
Click to collapse
I didn't change anything at all... and honestly with all of the other A11 problems I've been having... I didn't even think to check that it was working. It just has been. I also double-checked with AccuBattery and the history never shows above my limit.
This is my control file settings as seen on the main screen:
Code:
/sys/class/power_supply/charger/charge_disable, 0, 1
jljtgr said:
I didn't change anything at all... and honestly with all of the other A11 problems I've been having... I didn't even think to check that it was working. It just has been. I also double-checked with AccuBattery and the history never shows above my limit.
This is my control file settings as seen on the main screen:
Code:
/sys/class/power_supply/charger/charge_disable, 0, 1
Click to expand...
Click to collapse
I think that's the custom setting probably restored from your Google backup. Same one I was using. I'm gonna try it again though, thanks
hawkswind1 said:
Anyone found a consistent way to limit battery charge % on Android 11? The custom settings I used with Battery Charge Limit app on 10 work intermittently on 11. Often times I'd wake up to 100% charge. Currently I'm using Advanced Charging Controller magisk module with it's accompanying AccA app but often AccA gets killed in the background even after not optimizing it in battery optimization. The only workaround I've found is to create a macro that opens AccA every time I plug in the charger. With that step it's consistent but I'd like to find something not so hacky.
Click to expand...
Click to collapse
Have you tried Accubattery? Along with charge limiting it has other useful features, including reporting battery capacity vs. new (under health).
v12xke said:
Have you tried Accubattery? Along with charge limiting it has other useful features, including reporting battery capacity vs. new (under health).
Click to expand...
Click to collapse
Accubattery is fine and all for reporting and giving an idea of where you want to stop charging... but it has no ability to limit charging. The only thing it can do is nag you to take the phone off the charger. This thread is about root applications actually blocking the phone from charging past a certain level without making the user do anything or even notifying the user about what's being done.
I realize this is a couple of months old. but I just got a new OnePlus 8T, now rooted, and I'm trying to use Battery Charge Limit on it. I can't quite figure out the settings to have it work consistently. Let's say the phone is already at 100% when I plug it in. Battery Charge Limit starts, but then it flip-flops between Charging and Not Charging, starting and restarting. The phone woke me up last night because it was making a ding every time Battery Charge Limit flipped between charging and not charging. One would think that if the phone was at 100% Battery Charge Limit would turn off charging and let it drop down to my 85% limit and then back up to 91%, but never got above 91%. Thoughts? Thanks.
rcbjr2 said:
I realize this is a couple of months old. but I just got a new OnePlus 8T, now rooted, and I'm trying to use Battery Charge Limit on it. I can't quite figure out the settings to have it work consistently. Let's say the phone is already at 100% when I plug it in. Battery Charge Limit starts, but then it flip-flops between Charging and Not Charging, starting and restarting. The phone woke me up last night because it was making a ding every time Battery Charge Limit flipped between charging and not charging. One would think that if the phone was at 100% Battery Charge Limit would turn off charging and let it drop down to my 85% limit and then back up to 91%, but never got above 91%. Thoughts? Thanks.
Click to expand...
Click to collapse
It's possible it's not configured correctly for your phone. You can also just disable that notification channel, since mostly it's just annoying. It constantly fliping might mean that there's more than one control file for your phone type and it's using an ineffectual one that the OS is overriding immediately. For example, the default one it detects for Pixel 4's is not the one it should use.
jljtgr said:
It's possible it's not configured correctly for your phone. You can also just disable that notification channel, since mostly it's just annoying. It constantly fliping might mean that there's more than one control file for your phone type and it's using an ineffectual one that the OS is overriding immediately. For example, the default one it detects for Pixel 4's is not the one it should use.
Click to expand...
Click to collapse
Thanks for the reply. The problem is that I use the notification to trigger Tasker profiles, so I was hoping to figure out a way to get it to stop flipping back and forth while also retaining the notification. I think it's just the standard control file since it's a OnePlus phone, but I'm not sure I can figure out otherwise. When I first start using BCL, I found the control file and was able to manipulate it with a SQL editor and Shell commands in Tasker, but I haven't poked around the OnePlus 8T that much yet.
Just as a PSA, I think Adaptive Charging from the January update can conflict with this. On days where I set a morning alarm, I found that my battery was more full than it should be. I suspect that Adaptive Charging does something that Battery Charge Limit cannot block. I won't know for a few days if turning this off in settings fixes things 100% or the January update just really screws with this.
Battery Charge Limit settings for pixel 3
Hi all, I like the app, Battery Charge Limit (root required), but was wondering how to set the control file. I works fine with Xperia (with/without Lineage), but doesn't work with Pixel 3 stock firmware (Android 10). And finally found how to...
forum.xda-developers.com
Well, as a root method it does seem to work. Depending on your taste, it might be cleaner than an app toggling a different variable. Of course you need an app to set the file back to 100 when you want it. Some Tasker widgets work for my purposes... could probably make it a QuickSettings toggle in the shade, actually.
Bottom of that thread, I was wondering specifically if there might be way to force an unrooted device to think it met one of these conditions, so it only charges to 80%.
Specific post link:
Battery Charge Limit settings for pixel 3
Hi all, I like the app, Battery Charge Limit (root required), but was wondering how to set the control file. I works fine with Xperia (with/without Lineage), but doesn't work with Pixel 3 stock firmware (Android 10). And finally found how to...
forum.xda-developers.com
i.e.
... your phone automatically limits charging to about 80% under certain conditions:
Continuous charging under high battery drain conditions, like game play.
Continuous charging for four days or more.
I've done very little research on this, but I expect the ways to fool the phone into thinking those things are happening is even more complicated than using that root file control. Meaning also requiring root but manipulating other control files.
I suppose you could have a case and a ribbon USBC connector that fools the charging logic into thinking it is constantly connected to a hardware charger even though it's still at a net negative power. After 4 days of having the case on, it might work. I don't know why anyone would have already built something like that, however.
I would root my phone but, as my daily driver, I need things like banking apps to work. They (at least some) detect rooted phones and refuse to load as a security measure (which is probably a good thing) :-(
Banking apps are usually just a frontend to their website used API. They have no problem with you using a browser on a rooted phone or Linux PC, etc. Any app that stores sensitive data on your phone and relies 100% on the filesystem being locked down was created wrong and lazily. The only thing about banking apps that might be legitimate is when things like unique CC info is stored for NFC and using a TPM can't be assured. Most banking apps, however, do not store anything sensitive on your phone aside from a login token which all websites also do. (it's called a cookie)
My personal preference is that no app is better for me than being able to root my phone. I don't play mobile games that want to keep you from cheating and I don't even care about Google Pay, which I'm not sure has legitimate need to block root either... they just do it to keep banks happy, which as I suggested, I think they're full of BS.
The only thing more BS than this no-root nonsense from app companies is when carriers do it by locking bootloaders. I try to re-use my phones for as long as possible and without the ability to limit battery charge, the batteries swell and die quickly, every time. It's good news that Google added code where phones plugged in constantly will limit charge automatically... but I doubt there is a way to trick it from the outside. (without root)
Hmmm. Maybe lazy programming, but I'm not ready to change my Bank so I can root my phone
Back to the topic... I don't think I'm ready to trust the /sys/devices/platform/soc/soc:google,charger/charge_stop_level method. Several times I found my phone at low battery and not pulling any current from the USB port, but not losing charge either. It had put itself into a stalemate where it was stuck below 10% for hours. Resetting the value from 60 to 100 allowed charging again. The battery charge limit app never really caused this. So I guess I'm going back to the full app method.
jljtgr said:
Back to the topic... I don't think I'm ready to trust the /sys/devices/platform/soc/soc:google,charger/charge_stop_level method. Several times I found my phone at low battery and not pulling any current from the USB port, but not losing charge either. It had put itself into a stalemate where it was stuck below 10% for hours. Resetting the value from 60 to 100 allowed charging again. The battery charge limit app never really caused this. So I guess I'm going back to the full app method.
Click to expand...
Click to collapse
I would like to definitely solve this problem I have been struggling with for years. What did you do, can you please help me? It seems extremely similar to what you wrote here.
I have been using battery charge limit on my Xiaomi Mi Mix (1st model) since android 7.1 (lineageos) (and I might have messed with a couple files, not sure, can't remember). When updating to android 9 (lineageos) couple years ago I started having the problem you described. Also I notice sometimes I plug the phone at safe levels such as 35% or 60% and it doesn't charge same thing. Also it only charges with certain chargers and not others.
Earlier today it was 11% battery, could not boot android, didn't charge. I got the idea for the first time to try booting in TWRP (on+volume up buttons) and it immediately started charging at full speed. So there's obviously nothing wrong in the hardware, it's software or just config.
I would like to definitely solve this problem, but I don't understand exactly what you did on your side to fix it. Please reply or message me if you have any suggestion Thank you!

Categories

Resources