Database Develop

No 3G with Cyan 4.2.3.1

Hi, looking for some help.
Original problem was noticed with Cyanogen 4.2.3 and still persists in 4.2.3.1. Everything else on the phone works fine (as far as I can tell). Orginal android ROM had working 3G and after going to cyanogen's I havent been able to get it.
Here are the APN settings I currently have:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: none
Password: ****
Server: *
MMSC: HTTP://mms.msg.eng.t-mobile.com/mms/wapenc
MMS port: <not set>
MCC: 310
MNC: 260
APN type: <not set>
any help that could be giving would be greatly appreciated. If further information is needed let me know.
Thanks

robxfinch said:
Hi, looking for some help.
Original problem was noticed with Cyanogen 4.2.3 and still persists in 4.2.3.1. Everything else on the phone works fine (as far as I can tell). Orginal android ROM had working 3G and after going to cyanogen's I havent been able to get it.
Here are the APN settings I currently have:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: none
Password: ****
Server: *
MMSC: HTTP://mms.msg.eng.t-mobile.com/mms/wapenc
MMS port: <not set>
MCC: 310
MNC: 260
APN type: <not set>
any help that could be giving would be greatly appreciated. If further information is needed let me know.
Thanks
Click to expand...
Click to collapse
try reflashing the newest radio

i have a similar problem i get 3g but when i loose connection the phone doesn't switch to 2g and stays unconnected and i have reflashed the radio

rchatburn said:
i have a similar problem i get 3g but when i loose connection the phone doesn't switch to 2g and stays unconnected and i have reflashed the radio
Click to expand...
Click to collapse
i remember this used to happen to me with my blackberry curve .. did you ever get it wet?

Question: No DATA on US ATT Unlocked Eurospec

Just got my Note straight from the UK, unlocked. Been on the phone with ATT about 6 times. I can send and recieve calls, texts - but no DATA. They can't seem to figure out why it will not pick up the ATT Data Network. Sim, EIN all linked, but no joy.
I am a noob, sorry - any ideas. I hate to send the phone back.
Any ideas ?
Update - Funk2641's response below (no APN was entered) - fixed it the issue.
Still, ATT would not give me a 4G smartphone plan - even though the H+ shows up next to the clock ? Initial Speedtests look like the same as my Infuse, Atrix and 4S.
Thanks everybody (Funk2641) for your help ! I hope this thread saves some agony for many as this phone is hitting the states. Don't know if I will tread in Eurospec for the Nexus, as I will want to hold that one in my hand first.
Also, this is a great phone - speed, battery life and the screen is fantastic !

Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)

No, I will give it a try.
Thx.

please keep posted.....I'll be on Att Friday

I will follow this thread since I will also switch from T-mobile to AT&T.

I too have the same issues. I actually used a few different apns and got edge to work poorly, I sighed and told myself ICS would fix it all up better and to just enjoy the extra battery life of 2g now, God I hope a get this cleared up
Sent from my GT-N7000 using xda premium

Technically, the Note is just a big SGS2. There's no reason on the phone side you should be having a problem using the Cingular APN. I'm using a ISGS2 and a UK 3G Tab 10.1 on AT&T with no problem. It's either something with the provisioning of your account or your Note may not have the right bands (Asian?). The latter is unlikely if you ordered it from the UK. Try reseting the APN to default under network settings. Also, if you're on a legit 4G plan there's a specific APN that you can find on the ASGS2 forum.

Here is another APN that works, I had the same issue
For APN settings use the name ATT and then for APN the word phone. Leave everything else blank-what is needed will get filled in automatically. Click the APN when you finish adding it and the radio button turns green to indicate it is working. The advantage to this APN setting is it gives you clear access and data speeds are not limited by ATT.

Those apns didn't work and I too a would doubt my phone bring the Asian version,.this version of gingerbread has the option to suspend my data network from holding down the power button maybe the software isn't...... I don't know I have no clue but my apns are normal but when's search they don't come up
In the list automatically so something a wrong
and I came from a hspa+ phone so my plan is already to go, I called to double check

to op, glad you got it straightened out...who did you order from and how much?

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Doc, I need it by the weekend like a drug, can you suggest a place to get it from. I'm Stateside and on AT&T if it helps!

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.

the.mister.d said:
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
Click to expand...
Click to collapse
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
with the note you need to set manually the APN?did not set automatically?After insert the SIM Card and restart is not set?

Funk2641 said:
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Click to expand...
Click to collapse
That's nice! Thank you!
I will be ordering mine this weekend. Not sure though which place yet !
Waiting to see if I can get it any cheaper from India. Have folks coming from India to NY in two weeks. Lets see!!
Thank you again!

I cannot connect to at&t. under APN i get "no items" and cannot get to a place to enter apn settings.
"use packet data" is selected
network mode is gsm/wcdma (auto mode) is selected
"search networks shows select automatically, at&t, and at&t. I have tried all three
i get regestered on network, but still will not connect help!
I am on the iphone plan with unlimited data, worked just fine in galaxy tab original 7"

i tried using funks apn settings and i still have nothing, i came from an atrix where i always got H+ and now here are me speeds, my speed test was done in detroit, i live in NJ my ping was 317, U 144 kbps D 155 kbps, i have no idea what is wrong with this phone but att can get going on it, i called and they have nothing for me!!! i dont know what to do

What plans are you guys, please?
(Anyone on month to month $50 unlimited?

There are two different APNs to use depending on what data plan you're on. If you're using a MediaNet or Data for non-Smartphones plan (3G) you need to use the Cingular APN. If you're on a legit 4G plan you need to use the special APN for 4G phones. If you reverse it, you'll get no data. For those of you on the 4G plan, go in to the APN settings. When you press menu, there's a reset to default option. It should pull the 4G settings down automatically. If you're on a 3G plan don't do this and instead manually enter the below settings. If you do this correctly you should get data. If you have a quad-band phone and still can't get data it's something with your account settings and not the h/w.
Cingular APN from the SGS2:
Name: Cingular 410
APN: wap.cingular
Proxy: null
Port: null
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: null
MCC: 310
MNC: 410
Authentication type: null
APN Type: internet + mms
4G APN from ASGS2 (There are two)
Name: ATT PHONE
Everything null except
MCC 310
MNC 410
APN type: Internet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: mms,supl

[Q] AT&T Internet slowing down for International Note

For the last few days, I noticed my AT&T internet connection slowed down drastically (from like 3M down to 300k on SpeedTest) and the protocol is jumping back and forth from H to H+ to 3G.
My phone has Fast Dormancy disabled. It would normally stay at "3G" and then jumps to H+ when I started using the Internet. Starting from a few days ago, I noticed it would stay at "H" and then trying to acquire a H+ signal, but sometimes in vain and fell back down to 3G and going in a loop. I toggled Fast Dormancy back on, and it didn't make a difference.
This happens on both the "wap.cingular" and "phone" APN settings. No matter which one I use, now the data speed is only around 300K. It used to be around 3M.
I am on a tiered 4GB data plan. I am not a heavy data user (averaging about 1G to 2G a month) and I never received any text message from AT&T telling me that I am being throttled.
I live in South Florida, and I am wondering if anyone experienced the same slow down. Please share. Thanks. (By the way, on subsequent investigation, I found that rebooting the phone corrected the problem, both yesterday and today.)

I'm having the *exact* same problems up here in Seattle. I hope someone can help us out!

Also in Florida here, had a tiered plan and was experiencing the same regardless of APN used too.
I was told, "With THAT phone, you'll never get 4g speeds" twice by a representaive as I voiced my displeasure at the speeds I was getting. "Now, if you want to buy one of our phones, you'll get 4g speeds." I laughed and said, "No, I just want to disconnect my service, I don't want a 2 year contract and I don't want an inferior phone."

similar problems here in NYC
phone way slower
data speeds test confirm up & down speeds are way down cut way more than in half
something is up im gonna give it a few more days before I dump at&t all together
just doesnt make sense 4 me to pay at&t 2 play games w my connection and im sick of the run around nickel and diming they do to us...they want u locked 2 them and they hate.ublocked phones amd freedom
anyhow the service isnt anywhere near as good as they claim at least not here in NYC
end of rant
Sent from my GT-N7000 using XDA App

Skiddledank said:
I was told, "With THAT phone, you'll never get 4g speeds" twice by a representaive as I voiced my displeasure at the speeds I was getting. "Now, if you want to buy one of our phones, you'll get 4g speeds." I laughed and said, "No, I just want to disconnect my service, I don't want a 2 year contract and I don't want an inferior phone."
Click to expand...
Click to collapse
lololololol
its like their employees get zero training have zero respect for ur intelligence u cant talk to them its like a wall or an artificial inteligence bc theres no thinking involved
Sent from my GT-N7000 using XDA App

Same problem here and I've also experienced no data at times in areas that I have been quite good in the past. My download speeds have gone from a high of 1800kbps last week to about 1200 now. I have a 4G sim card installed and the following are my APN settings:
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC http://mmsc.cingular.com
MMS proxy: wireles.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN typr: internet + mms
It seems to have coincided with the release of the at&t note on 2/19

Im in SWFL as well and have noticed significantly slower connections lately on my International Note.
I actually ordred an ATT note and ganked the SIM card to put in my N7000 and am sporting that phone's (the i717) IMEI...I came from a Nitro HD prior to this phone and was getting 9-13 mbps down (no LTE here just H+) and with the same settings am getting half of that now...crazy! Not sure what the deal is but it would certainly be nice to get back to the H+ I had a few weeks ago...
Just for giggles here is the APN info I'm using (courtesy repherb)
AT&T:
Name: Nitro Default APN
APN: pta
Proxy: <none set>
Port: <none set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,mms,supl,hipri
Name: AT&T US
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Also I did notice a bit of an increase from the build.prop info that was posted around here earlier...thought it might be worth a shot and ended up being a bit of a boost!
Also forgot to mention that I put my network preference as WCDMA only...that seemed to help speed it up a bit...although seemed counterintuitive (with AT&T being GSM)
Hope we can find some help!!

Considering At&t, they may be throttling all international phones now! Lol

fishscale28 said:
Im in SWFL as well and have noticed significantly slower connections lately on my International Note.
I actually ordred an ATT note and ganked the SIM card to put in my N7000 and am sporting that phone's (the i717) IMEI...I came from a Nitro HD prior to this phone and was getting 9-13 mbps down (no LTE here just H+) and with the same settings am getting half of that now...crazy! Not sure what the deal is but it would certainly be nice to get back to the H+ I had a few weeks ago...
Just for giggles here is the APN info I'm using (courtesy repherb)
AT&T:
Name: Nitro Default APN
APN: pta
Proxy: <none set>
Port: <none set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,mms,supl,hipri
Name: AT&T US
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Also I did notice a bit of an increase from the build.prop info that was posted around here earlier...thought it might be worth a shot and ended up being a bit of a boost!
Also forgot to mention that I put my network preference as WCDMA only...that seemed to help speed it up a bit...although seemed counterintuitive (with AT&T being GSM)
Hope we can find some help!!
Click to expand...
Click to collapse
WCDMA = GSM 3G technology.

I'm still getting my average 2 down 1 up.
Sent from my GT-N7000 using xda premium

I am currently chatting online with a representative and have pointed her to this forum post. I am hoping she will forward it to the ATT engineers. I will let you know when we are finished! She is currently consulting with a Tier 2.
---------- Post added at 01:48 PM ---------- Previous post was at 01:33 PM ----------
All done with the rep. They couldn't figure it out, of course, but she said she was going to try and get this post and my information to the engineers to see if they can figure it out. It's better then nothing I guess...

As I mentioned in my first post, a temporary fix (for me at least) seemed to be a reboot. After a few days of experiencing this bizarre phenomenon, I decided to reboot my phone yesterday morning, and that seemed to correct it for a while.
This morning when I witnessed the H,H+,3G loop again and tested the speed, it was like 300K. I immediately rebooted the phone and re-tested. The speed went back to the usually 2M-3M range. It has remained so for the last few hours. (knock on wood)
I am wondering if AT&T is tweaking their towers to optimize them for the new AT&T-branded Note. The fact that the International Note now idles at "H" instead of "3G" is definitely different than before. (To be exact, when you access the Internet actively, it goes up to H+, which is expected. But when you are done, it dips to 3G for a split second before reverting to an idle state of "H".)

erase the proxy and proxy port lines

If there is one major problem for me it is data speeds. I'm in Boston and AT&T's speeds & connectivity here are atrocious. Any tips on increasing speeds e.g. settings/apn's etc are appreciated. btw I have always disabled fast dormancy, which doesn't really seem to do much difference on or off.

mintu123 said:
erase the proxy and proxy port lines
Click to expand...
Click to collapse
I did this and it seemed like it helped a little...I also took the mmsc info out but it worked better with. Thanks!

fishscale28 said:
I did this and it seemed like it helped a little...I also took the mmsc info out but it worked better with. Thanks!
Click to expand...
Click to collapse
I've never actually had the proxy and port proxy, but oddly enough I just tried it with and it was even worse. btw I think mmsc is required for proper mms, and shouldn't have any effect on data transfer (I think)

Did you guy see this portion?
http://forum.xda-developers.com/showthread.php?t=1437805
You still have to disable a feature on your Note called Fast Dormancy. Fortunately, this is really quick and easy to do. But first, what the hell is that, and why do I have to disable it? Well without getting all technical, simply put, it's a feature which allows a device to very quickly switch from an idle data state to UMTS/HSPA/HSPA+ and back to idle again, and generally work more efficiently, thus improving performance, and saving battery life. Problem is, in order for this feature to work, BOTH the device and the network that device is on need to support it. Unfortunately, AT&T does not currently support Fast Dormancy. As a result, by having fast dormancy enabled on your device, it'll have the complete opposite effect than what it was intended to have. Basically, your battery life will suck more, data connections will be erratic, slow, and unreliable, and you're effectively wasting data overhead on a feature that, for AT&T, just doesn't exist. Disable it, and your Note will fly like it was intended.
To disable Fast Dormancy, from your dialer, enter in *#*#9900#*#*
This should pull up your SysDump menu. There, close to the bottom it should indicate your current Fast Dormancy state, enabled by default. Select that option, and it should indicate that Fast Dormancy is disabled. Exit and enjoy! Reboot the phone for good measure though. You generally don't have to, but sometimes it irons out any issues that may arise.
Click to expand...
Click to collapse

Yep sure did...some really good info there. I did and tried just about all the settings and they worked quite well but after some tweaking I figured the settings I'm currently using seem to work out pretty well. Good looking out tho!

Noticed the same issue on my international Note - slow/non-existent internet connection, phone/text does not seem to be affected.
It also seems like my battery is running down faster, like it's searching for a signal all of the time. I disabled Fast Dormancy awhile back.
This all started around Friday for me. Hope it gets fixed by AT&T or someone finds a workaround.

cred0021 said:
Noticed the same issue on my international Note - slow/non-existent internet connection, phone/text does not seem to be affected.
It also seems like my battery is running down faster, like it's searching for a signal all of the time. I disabled Fast Dormancy awhile back.
This all started around Friday for me. Hope it gets fixed by AT&T or someone finds a workaround.
Click to expand...
Click to collapse
Have you tried playing around with installing some different modem files from this post?:
http://forum.xda-developers.com/showthread.php?t=1423396
I've had some luck using the latest modem...that might help you out a bit and also check the settings we've referenced...I found that my APN works best as:
APN: pta
APN type: default, supl, hipri
All the other stuff stays as is and name is whatever you like. Also try to set it for WCDMA only. Hope that helps!

Help: tbaytel/rogers can't dl/ul mms attachments

I can't seem to send or receive mms attachments like video or picture, and I am on 3G. I have rogers apn settings and can brows the net, send texts, make calls no problem.
Problem
I am signed up on tbaytel/rogers network on a 3 year plan, and live in Ottawa now for school. I lost my original rogers captivate and bought a at&t version from ebay as I didn't want to buy another tbaytel captivate.
I am using the latest cm9 captivate nightly build, yet this problem has been plaguing me since I got the at&t version. I have tried using different modems but no go.
I can't seem to get a competent answer out of tech at tbaytel or rogers. I even asked sales and can’t find anything on the net.
If someone could help me out, maybe, send me tbaytel apn settings??
I’ll try and post the logcat. I still believe that I need the right apn but I could be wrong.
Logcat
https://docs.google.com/open?id=0B1ql7ydolU52dVQwcGZSN0JqRUk
Edit fixed: had to many Apn settings deleted all but internet/moms/tether
these are my settings:
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>

SkyboneNoya said:
I can't seem to send or receive mms attachments like video or picture, and I am on 3G. I have rogers apn settings and can brows the net, send texts, make calls no problem.
Problem
I am signed up on tbaytel/rogers network on a 3 year plan, and live in Ottawa now for school. I lost my original rogers captivate and bought a at&t version from ebay as I didn't want to buy another tbaytel captivate.
I am using the latest cm9 captivate nightly build, yet this problem has been plaguing me since I got the at&t version. I have tried using different modems but no go.
I can't seem to get a competent answer out of tech at tbaytel or rogers. I even asked sales and can’t find anything on the net.
If someone could help me out, maybe, send me tbaytel apn settings??
I’ll try and post the logcat. I still believe that I need the right apn but I could be wrong.
Logcat
https://docs.google.com/open?id=0B1ql7ydolU52dVQwcGZSN0JqRUk
Click to expand...
Click to collapse
I have the same problem on Rogers too. It has started since using ICS Rom builds like CM9 and AOKP builds. Mine is the i896 Rogers version of the Captivate so this is a software issue not hardware.
Sent from my SGH-I897 using xda premium

Hmm. I should have tried on a stock rom.. Only just upgraded bootloaders after a year, no problems but I was wondering about glitch kernel. Meh.
Anyway I'll post back if I get a hit. I'm still trying to convince my lazy brother to back up his apn for me. See how it goes. Cheers

Same situation (tbaytel here) and this post fixed things 100% without even rebooting - forum.cyanogenmod.com/topic/46974-rogers-access-point-names-for-cm79/

Edit fixed: had to many Apn settings deleted all but internet/moms/tether
these are my settings:
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
Click to expand...
Click to collapse
Little confused by that. Do you mean that I need to delete "Rogers #1" and "Rogers #2", and then set the APN settings for "Rogers", "Rogers MMS", and "Rogers Tethering" to the above settings?

SkyboneNoya said:
I can't seem to send or receive mms attachments like video or picture, and I am on 3G. I have rogers apn settings and can brows the net, send texts, make calls no problem.
Problem
I am signed up on tbaytel/rogers network on a 3 year plan, and live in Ottawa now for school. I lost my original rogers captivate and bought a at&t version from ebay as I didn't want to buy another tbaytel captivate.
I am using the latest cm9 captivate nightly build, yet this problem has been plaguing me since I got the at&t version. I have tried using different modems but no go.
I can't seem to get a competent answer out of tech at tbaytel or rogers. I even asked sales and can’t find anything on the net.
If someone could help me out, maybe, send me tbaytel apn settings??
I’ll try and post the logcat. I still believe that I need the right apn but I could be wrong.
Logcat
https://docs.google.com/open?id=0B1ql7ydolU52dVQwcGZSN0JqRUk
Edit fixed: had to many Apn settings deleted all but internet/moms/tether
these are my settings:
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
Click to expand...
Click to collapse
Check the new thread I JUST made:
http://forum.xda-developers.com/showthread.php?t=1821137
hope it works for you
---------- Post added at 04:13 AM ---------- Previous post was at 03:59 AM ----------
Ballsfalsky said:
Little confused by that. Do you mean that I need to delete "Rogers #1" and "Rogers #2", and then set the APN settings for "Rogers", "Rogers MMS", and "Rogers Tethering" to the above settings?
Click to expand...
Click to collapse
delete all the other APNs except the 3 he mentioned. I actually deleted all and now only have "Rogers MMS" and phone works perfect!

[Q] HTC ONE 801s (International) Update to 4.4.2 lost data connection

I am using an international version of the HTC ONE 801s and after I updated to 4.4.2 last night I realized that I don't have data connection.
I can still make calls, data is turned on from the looks of it but I don't get data. Wifi works fine.
Anyone else have this issue?
Oh yea I'm with Rogers.
Please help T.T

3py0n said:
I am using an international version of the HTC ONE 801s and after I updated to 4.4.2 last night I realized that I don't have data connection.
I can still make calls, data is turned on from the looks of it but I don't get data. Wifi works fine.
Anyone else have this issue?
Oh yea I'm with Rogers.
Please help T.T
Click to expand...
Click to collapse
first dial *#*#4636#*#* to open the phone test menu. Select ''phone info'' and then make sure preferred network type is set to ''GSM/WCDMA/LTE auto''.

yea it is set to that currently. But no go

3py0n said:
yea it is set to that currently. But no go
Click to expand...
Click to collapse
Is your APN settings is correctly set for Rogers? If yes try deleting your rogers APN and create a new one.
btw don't forget to quote or mention me if you want me to receive a notification of you reply.

alray said:
Is your APN settings is correctly set for Rogers? If yes try deleting your rogers APN and create a new one.
btw don't forget to quote or mention me if you want me to receive a notification of you reply.
Click to expand...
Click to collapse
Currently my APN list is empty lol...I clicked the options and "reset to default" and it completed but there is still nothing here.

3py0n said:
Currently my APN list is empty lol...I clicked the options and "reset to default" and it completed but there is still nothing here.
Click to expand...
Click to collapse
ok so create a new APN and name it ''Rogers LTE''
set those values manually:
APN: ltemobile.apn
MMSC: http://mms.gprs.rogers.com
proxy mms: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
it should work with this

alray said:
ok so create a new APN and name it ''Rogers LTE''
set those values manually:
APN: ltemobile.apn
MMSC: http://mms.gprs.rogers.com
proxy mms: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
it should work with this
Click to expand...
Click to collapse
YES!!! I think it worked. I see the "H+" or "3G" or "E" beside the bars.
Will probably get data later when I have better reception.
Thank you
Any idea why the APN was removed?

3py0n said:
YES!!! I think it worked. I see the "H+" or "3G" or "E" beside the bars.
Will probably get data later when I have better reception.
Thank you
Any idea why the APN was removed?
Click to expand...
Click to collapse
it happens randomly sometimes after an update. Idk why. I guess Rogers screwed somthing in their ota update. I saw the same thing on my friend's SGS4. Hes with Rogers too and he lost is apn after the OTA.

alray said:
it happens randomly sometimes after an update. Idk why. I guess Rogers screwed somthing in their ota update. I saw the same thing on my friend's SGS4. Hes with Rogers too and he lost is apn after the OTA.
Click to expand...
Click to collapse
Well regardless, thank you very much for your help Saved my phone.

3py0n said:
Well regardless, thank you very much for your help Saved my phone.
Click to expand...
Click to collapse
np

alray said:
np
Click to expand...
Click to collapse
It does not work actually. Just a constant updating or reloading icon in the header bar. I tried restarting but that did not solve the problem. But I do see the h+ sign for data but I get no connection.
Please help and thank you TnT!

3py0n said:
It does not work actually. Just a constant updating or reloading icon in the header bar. I tried restarting but that did not solve the problem. But I do see the h+ sign for data but I get no connection.
Please help and thank you TnT!
Click to expand...
Click to collapse
try both apn settings listed here (from Rogers website) Make sure you don't make any typo. If it still doesn't work, I think you'll have to call Rogers Tech support since your phone is stock and you didn't messed anything.
you might also want to try this one:
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
Server: 172.25.0.107
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MMS protocol: WAP 2.0
MCC: 302
MNC: 720

alray said:
try both apn settings listed here (from Rogers website) Make sure you don't make any typo. If it still doesn't work, I think you'll have to call Rogers Tech support since your phone is stock and you didn't messed anything.
you might also want to try this one:
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
Server: 172.25.0.107
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MMS protocol: WAP 2.0
MCC: 302
MNC: 720
Click to expand...
Click to collapse
Hey thanks, I'll look into it once I have reception again.
Btw I MAY have found out the problem....I typed "ITEMOBILE" instead of "LTEMOBILE" LOL!!!! but unsure as I can't test it right now.
But thanks. I'll report back tomorrow

works!!!!! lol I typed "ITE" instead of "LTE" roflmao...geeeez