Hi everybody, i've a question about installation of kernell and roms.
I must flash my phone with Ufficial Samsung Firmware before install new kernel and new rom?
And i have another question (i just used search but i didn't find anything) about differences on XWJW1 JVZ and go on.. which are differences?
Thank u
u dont have to instal an official firmware before instaling a custom kernel or rom. its obvious that if u didnt flashed the phone yet, it has an official rom on it jvs jvz jvt - depends on the location where you bought the phone (i think) i am kinda a new too
Ok thank u, then about jvz jvs jvt i should know the corrispective locations..
I think jvt is the most stable, works really well with latest semaphore kernel, waiting for next stable release, then hopefully ics will be worth a try
Sent using TCP/IP
Related
Just got the 16GB Tab a few days ago...
Well after scouring the forums for all sorts of info, the amount of research done on the Tab by you people is amazing ........ and still searching for more info day by day....
I wish to know which version of gingerbread is the "most stable one" ??
The asian ones which have been recently released ? Or the latest european firmware ?
Because I wish to run a stock samsung's own GB version before straightaway going in for a custom ROM like Overcome...
Also if I want the closest stock ROM based experience should I go for -
[ROM/Kernel][GSM][Android 2.3.3] ROM based DXJPE (build 23 June) by DiP7 ???
ANother newbish question will be -
If I flash a ROM and install the provided kernel with it ? Do I need to also flash a new modem file via ODIN ? or the original file stays there ?
And do I need OCLF after installing a stock/custom GB based ROM just for some speed improvements and/or does the EXT2 file system conversion give boost ? (because OCLF in my Galaxy S SL i9003 really did make overall performance better) Also the lagfix to be applied is V1+ right ? or do I also go for applying V2 lagfix in OCLF?
Thanks for reading all this and I would love to hear your ideas over these questions ....
No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .
A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.
rangercaptain said:
A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.
Click to expand...
Click to collapse
Thanks a lot for the info..... and with that after CF-root can I do the lag fix ? or there's no need ?
adi6262 said:
No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .
Click to expand...
Click to collapse
Thanks a lot... I'll go with JQ1 for now... then overcome GB version and then probably some asian firmware...
hello,
wish all here a happy xmas. sorry for my bad english but i hope that i can explain my problem.
I cant find the right firmware in your list.
what i need is a brandingfree firmware. sorry but iam a noob
firmware is 2.3.5
Baseband I9001XXKPF (this what i cant find)
wed-sep-28/KST2011
csc- 9001/XEGKP2
you need more ?
and question is : which custom firmware are pos. ?
hope u can help me
lg marc
You should be able to flash any custom firmware, like Performance Edition RC2 or Cranium Rom. If you want just the stock unbranded firmware, you can flash last one on the list - 2.3.6 XXKPS. I don't know what language are you using on your phone, if it is not English, pay attention to that as well - you'll find all info in relevant threads.
@tomi555,
I flashed the regular 2.3.6 yesterday.with odin very simple and easy. like 10 minutes.
I need a custom firmware a mixed between speed and akku protection.
anybody an idea ??
lg gyver
Well I can recommend you try Performance Edition RC2, it is currenty in beta, you can wait a day or two for the final release. If you are going to install beta, be sure to change CPU governor to smartass v2. Final version will have that enabled by default. It is really fast with good battery life and no bugs (but you can have small issues with installation). You will really see a difference compared to stock rom
Or you can try Cranium rom, but I haven't tested it, seems it currently has a problem if you want to set mp3 as a ringtone. Other than that it seems to be great if you want to overclock your CPU. I don't have such needs so I'm not using it.
thx tomi
ok I have the rc4 now. but how I can update to rc6 or rc5 ?? Is it pos. to run rc6 on my i9001 ??
pls help
thx gyver
You mean Cranium RC6, of course it is possible, you can download the Odin one package from their website.
http://sakindia123.prophecy.li/
For other questions, info and installation tips check out its thread.
http://forum.xda-developers.com/showthread.php?t=1313650
thx soooo much.
I used this thread to flash to rc4.
Installation:
Installation for RC6(comin' up)
*Recovery Package (Now,easy to install!)
1)Install FeaMod Recovery
2)boot into recovery mode
3)Flash Cranium Rom
4)dont wipe cache.............and fix permssions!
thats all for update up to rc6 ???
lg gyver
Yes, I believe that's the method if you downloaded
Cranium Rom RC6 (CWM Version)
You can flash it via Odin MultiDownloader from your computer just like the stock rom if you download
Cranium Rom RC6 (Odin Version by nikagl)
But... like I said I don't have that ROM so perhaps better double-check / ask in that thread
I dont know how I can install Feamod Recovery.
If I have it to flash with odin ?? where is the ariesve file ?
or can I use the same as to flash the rom ?
lg gyver
got it.
damn this is very cool. thx to the hole xda team.
@tom special thx to u
lg gyver
What rom is best and most stable?
JVT stock rom with the semaphore kernel.
or wait for the F1 Innovation ROM Version 15 which is gonna be released tomorrow:
http://forum.xda-developers.com/showthread.php?t=1058814
thanks for the reply ill wait for the f1 and see
ICS 4.0.3 rc2.1 onecosmic
ICS 4.0.3 rc2.1 onecosmic
love these rom
ICS from onecosmic ist really cool, but think about the problems.
Some Apps dont run with this rom. For me, there ist no connection with MyPhoneExplorer. Also problems with unsing external SD, because it is rooted to mnt/emmc.
After flashing GOA 6.0 and some other custom roms, i am at the moment on doctorz rom 13.1 with no FCs or any other problems. It ist smooth, all apps are running..for me the best rom at the moment.
First thing you should decide if you want a 2.3.x ROM or a 4.0.x release. Then you can decide which ROM is right for you.
Check the screenshots and see what you like the most. I can advice MintBerry which is very fast and good looking, but since it's not based on a Samsung ROM you're gonna miss the Samsung Apps (as far as you can miss them).
Stable - any stock ROM or Stock Rom based; you can speed it up by using a different kernel (try semaphore) and/or tweaks (Thunderbolt's). I don's advise any ICS based ROM: they are still a little away from what I call ''stable''.
As for best... well, it depends on what you think. My advice is to try several ones. Each user has it's thoughts on what they think it's ''best''.
i want 2.3.x because i know ics isnt that stable and alot of things dont work still..
currently im on jvq 2.3.4 flashed with odin ( i don't have cwm because i dont know if it will void my guarantee :/ )
and a user above suggested jvt but i also saw jvz and im wondering which is better ( both 2.3.6 )
I have tried lots of roms, I found galaxydroid 3.3 gave best battery life, but 5.0 lost it. I am currently using mitrerom, and this seems very stable, nice tweaks, boots very fast and thus far have no issues. I am avoiding any 4.0 rom, as they are still all in beta stages and can still have issues. Best thing to do, is see what you like and flash, flash and flash. You cant do any wrong if you read the tutorials and take your time, oh and dont touch the bootloader!!
Buttwad. Why not to post a link to that "mitrerom"? I can't find it anywhere.
Sent from my GT-I9000 using Tapatalk
can someone post a download link for odin please ?
i cant find it anywhere
GingerReal2 R2.0.0 + Semaphore 2.4.0 i the best
ty all i used stock jvz and maybe ill change it in the future
DarthJe5us said:
can someone post a download link for odin please ?
i cant find it anywhere
Click to expand...
Click to collapse
Myhm... someone can.... first post here...
if i want to flash semaphore with odin i put it in the pda ?
it wont break stock jvz?
ANY kernel in Odin -passes as PDA.
JW1 with CWM-Kernel or SauRom ....
so stock jvz will work fine with semaphore 2.4?
bump :/ this is my last question
Pleas post firmware link to best rom available
XXJVU Best for the time...
Not sure if it's an officially released ROM but JW1 seems to be currently the most stable ROM for SGS.
dadyal said:
Pleas post firmware link to best rom available
Click to expand...
Click to collapse
...Define 'best'?
i'd say JVT or JVU for general usage.
For something more exciting various ICS builds can be very good (although they are still RC's)
Flake x
Just a quick question. I want to give stock Rom + Custom Kernel a try. Is it possible to install any kernel via Odin or only specific one like CF-Root? (e.g. i wanna install Semaphore Kernel).
Thanks.
Oh and does the loading bug after 100% battery and on cable still exist? (Hope u know what i mean)
Upload the stock rom,root and then flash via sgs flash kernel (app from market) semaphore kernel.
hi
here is my version:
-Galaxy S GT-i9000
-2.3.6 XXJW4
-some 2.6.35.7 kernel
my question is can i flash this kerner to one of those below?
mngb0.5.6
Devil 0.08
Glitch 13.1
SpeedMod Gingerbread
Semaphore 2.7.4
and which one do u prefer for speed and performance?
sorry for my english
Semaphore is standard in a lot of GB Roms
Speedmod would be my preference.. but why?
Are you having issues with it?
You are on JW4 2.3.6 - JW9 is out
EwOkie said:
Semaphore is standard in a lot of GB Roms
Speedmod would be my preference.. but why?
Are you having issues with it?
You are on JW4 2.3.6 - JW9 is out
Click to expand...
Click to collapse
i'm new to this there, just want to try some new kernels, see which fits me ye and this one is a bit slow.
is it so simple?just flashe over the existing kernel "stock"?
yes im on jw4 2.3.6.i thought jw4 is for europe so i downloaded it.can i flash jw9 over this one or do a fresh one?
are there any improvements in jw9.
thnx for reply
got my sgs on december 2012 and this was my first flash ever :/ so like i told i have no experience with this for now, but its not so hard.
I am a fan of GB roms, easier to mod :silly:
Phone slow as in how?
It all depends on what you use the phone for as there are roms out there for multitasking, games, overall use etc...
Im on GB Saurom JW9.. Its stable and well balanced (my preference, I am in the UK)
Or the MesoRom, there are many.....depending on your needs
Flashing a kernel can cause issues, a lot of people have crashed there phones cause they flashed the wrong ones
Read up or PM the developer of the Rom to see whats suited to your phone and other peoples posts.
Flashing another Rom :
If its a GB rom that you want to flash then its JVU First, then Root JVU then Flash your Rom that your wanting to use.
SEE HERE
Let me know if you need more help
EwOkie said:
I am a fan of GB roms, easier to mod :silly:
Phone slow as in how?
It all depends on what you use the phone for as there are roms out there for multitasking, games, overall use etc...
Im on GB Saurom JW9.. Its stable and well balanced (my preference, I am in the UK)
Or the MesoRom, there are many.....depending on your needs
Flashing a kernel can cause issues, a lot of people have crashed there phones cause they flashed the wrong ones
Read up or PM the developer of the Rom to see whats suited to your phone and other peoples posts.
Flashing another Rom :
If its a GB rom that you want to flash then its JVU First, then Root JVU then Flash your Rom that your wanting to use.
SEE HERE
Let me know if you need more help
Click to expand...
Click to collapse
thnx for reply i will try that link u gave me tonight.
the gt uses too much RAM and its a bit laggy.i dont use it so much but i like it smooth.on AnTuTu Benchmark i had 3777 score and on Quadrant can remember but i think it was 17xx.
i have like one or two games on it and some apps that i use every day.got rid of some system apps, was experimenting little and i was suprized.had like 190-200 free RAM always.but when i instaled google play it droped like hell 100-140.
after flashing with JVU i can flash any rom i like?4.2.1 JB???
in this curret 2.3.6 i dont have recovey mode.couldnt fix it .tryed 100 times, all possibilities.
i want this ROM to install on my sgs
http://forum.xda-developers.com/showthread.php?t=2041928
so can i flash it after JVU???
Yes just follow my Walkthrough and you can install any Rom you wish : HERE
Also If you like my themed rom of JW9 Saurom Thats HERE if you wish that i am using with no lags etc...
Do not flash GB from JB. You need to install ICS first, even for 5 minutes..
Flashing from GB directly to JB will likely lose your IMEI number and that will, depending on your country, leave your phone unable to call, text etc lol
If you know how to restore efs then you can miss out ICS without problem.
Sent from my GT-I9000 using Tapatalk 2