first i had valentine . Then i installed scoot cyanogen 7.1 . it worked fine .
then i installed 6.1 but then i could not install there was always a freeze.
then i installed valentine again . it worked fine.
Now i cant install CM again :/
HELP
scoot CM 5.5 is working but 7.1 and 6.1 is not working :/
TheMadxtremist said:
scoot CM 5.5 is working but 7.1 and 6.1 is not working :/
Click to expand...
Click to collapse
Which kernel do you have right now?
the same kernel .
and CM 7.1 worked yesterday but not now
TheMadxtremist said:
the same kernel .
and CM 7.1 worked yesterday but not now
Click to expand...
Click to collapse
OMG! Tell me exactly what kernel you have! It's very ****ing important for CM! Give me the link to the right thread with your kernel!!!!!!!!!!!
my kernel version is 2.6.32.9 [email protected] #285
and i dont exactly know the thread cuz i dloaded from sourceforge collection i think.
and please figure out something and tell me !!! :O
As a rule of thumb, I ALWAYS build a new kernel for EVERY install, not just download one and hope it works.
Kernels are build-dependent, meaning you shouldn't use one for both Froyo and Eclair or Donut.
ATools is your friend, especially now with the cache fix and better RIL implementation.
TheMadxtremist said:
my kernel version is 2.6.32.9 [email protected] #285
and i dont exactly know the thread cuz i dloaded from sourceforge collection i think.
and please figure out something and tell me !!! :O
Click to expand...
Click to collapse
Well, with this kernel you can forget installing CM builds . You need latest kernel with cache partition.
Damn !! :O
TheMadxtremist said:
Damn !! :O
Click to expand...
Click to collapse
Why? Just flash a new kernel.
Max, Here is the kernel I use, built for the Tilt.
500MHz, panel 2, Tilt, OC GPU and batt stat to 1500mah, EXT4 FS and either a 15 or 20mb cache partition, I don't remember.
I've never had an issue with this kernel... ever.
Just unzip (it's just a "store", non-compressed) and install via SD card or RUU.
Install it EVERY TIME you load another install, preferrably before installing.
Any issues should be posted here.
the phone cant be flashed by power+camera or same with reset button , so i was thinking that can i go to bootloader through MTTY or something else ?
If yes then do tell me :/
Are you saying the camera button doesn't work, or that the phone is stuck in OEMBL mode? (black screen)
If the second is the case, then this is a very touchy problem as I will NOT instruct anyone on how to use MTTY to recover a broken SPL.
If the camera button does work you can hold it and reset the phone with the attached kernel copied to the root of an SD card. Any of Oli's HardSPL's will work this way.
I almost forgot that you need to install an update to any older roms that allows for the /cache partition, download attached file and copy to andboot folder.
Do yourself a favor and KNOW WHAT YOU'RE DOING before EVER doing anything to the phone in MTTY! The MicroKernel on these phones is a tough egg to crack and even harder to fix once it is cracked.
okay , so i installed this update . now what exactly do i have to do?
and there's no black screen , but i ant go to bootloader so there must b a problem with the camera button :/
Related
my phone is stuck in a reload state i put jac xreroskiv rom or what ever its called and its stuck it starts up but keep saying hero over and over any ideas. help please thanks in advance i had already installed hero and such was just trying this new rom. i tried other roms too but no dice. even the original hero rom i originally put on here.
You should probably make a post for help in the rom's forum that you're having problems with.
Also, it would help if you told them which G1 device you had, what radio/spl and stuff like that.
But with really no info from your post the only things I can think of is that you need to do wipe or reformat your sd card.
Most likely you just have to repart your ext partition. But more info would help.
i have radio-2.22.19.261 hboot-1.33.2005 dream32b i was able to restore it but now i cant install the rom . i tried again and got the same problem so i probably got the wrong radio for the rom i want which is this one http://forum.xda-developers.com/showthread.php?t=534479\
You have the right radio. Really there is only one radio. There's the 26I that we use and the old radio that is not used anymore. Do not flash the hero radio or you will brick your phone. Did you repartion your sd card so it's fresh?
yeah i used the home and end button and did the partition using the boot loader thingy. i ended the loop but now its like i bough the phone new with root make sense?
mad82109 said:
yeah i used the home and end button and did the partition using the boot loader thingy. i ended the loop but now its like i bough the phone new with root make sense?
Click to expand...
Click to collapse
Not the least amount of sense to me, but if your phone is working ,then good. You had a bootloop which is usually solved by wiping your ext3 and phone.
maybe i have the wrong build? i had some ra build cant remember what it was called i reflashed to cyanogen 1.4 gonna try it when i get home
mad82109 said:
maybe i have the wrong build? i had some ra build cant remember what it was called i reflashed to cyanogen 1.4 gonna try it when i get home
Click to expand...
Click to collapse
all you had to do was wipe ext3, you should do this when changing any hero build unless otherwise noted. be sure you are wiping the intern. memory as well ALT+W in ReCon. also, repair ext filesystems and flash again, hero roms take a while to boot so make sure you are patient.
okay ill try when i get off work. i have 1.33.2005
2.22.19.26I my build is cyanogen + jf 1.4 can i install the rom i discussed earlier using the method u talked about? it was slow when i installed it earlier anyway of making it faster kept loading.
i fixed it dont know how lol but i did. i think i just had the wrong build. close thread plz. thanks for all the help people.
mad82109 said:
i fixed it dont know how lol but i did. i think i just had the wrong build. close thread plz. thanks for all the help people.
Click to expand...
Click to collapse
I kept seeing you say you were trying to flash the cyanogen build 1.4. That is not a rom but the recovery. But glad its working now. Put [SOLVED] on your thread title.
Hey, I flashed my Tattoo yesterday to OE v1.2.2 because v1.3 did not boot at all, just got stuck at "TATTOO"
Anyone know where and how I can get v1.3 to work? (I have already looked through the dev's forum)
1.2.2 runs smooth but there is some small lags that I want to get rid off.
If you know how, then please help me
chipper9117 said:
Hey, I flashed my Tattoo yesterday to OE v1.2.2 because v1.3 did not boot at all, just got stuck at "TATTOO"
Anyone know where and how I can get v1.3 to work? (I have already looked through the dev's forum)
1.2.2 runs smooth but there is some small lags that I want to get rid off.
If you know how, then please help me
Click to expand...
Click to collapse
maybe it needs the port for 1.3 flashed also ...
Hi,
I also flashed my tattoo to 1.3
First I thoght that it stucks on the tattoo screen. But it takes about 6 minutes at the first start. Then the screen become black. After further 3 minutes you will see the Loginfield of openEclair.
Any change since the v5 in the other eclair topic ?
Can someone test Foursquare and/or Tellmewhere to see if it still forceclose ?
-------------------------------------
Sent from my OpenEclair on Tattoo
nhutier said:
Hi,
I also flashed my tattoo to 1.3
First I thoght that it stucks on the tattoo screen. But it takes about 6 minutes at the first start. Then the screen become black. After further 3 minutes you will see the Loginfield of openEclair.
Click to expand...
Click to collapse
I tried that, did not boot even after 30 mins. Please write exactly how you installed and booted it?
I faced exactly the same problem with v5 of OpenEclair. I tried the previous versions and I haven't problems. I flashed this rom about 15 times with wipe every option(data, cache, ext partition) repair ext partition too but nothing helps.
v5 work for me....
the problem is app2sd i think...
is not working perfectly...
try to install v5 rom without ext3 partition
ikxdf said:
the problem is app2sd i think...
is not working perfectly...
try to install v5 rom without ext3 partition
Click to expand...
Click to collapse
app2sd doesn't work for me...I've an ext3 partition and it boots perfectly but app2sd doesn't work...there are some apps installed there from a previous rom...do you think if I format that partition I could use app2sd with the tattoo?
alberto88a said:
app2sd doesn't work for me...I've an ext3 partition and it boots perfectly but app2sd doesn't work...there are some apps installed there from a previous rom...do you think if I format that partition I could use app2sd with the tattoo?
Click to expand...
Click to collapse
no...i've tryed wit ext3 and ex2 and not work.
In the second release of my rom i'll remake all link manually and fix it
ikxdf said:
no...i've tryed wit ext3 and ex2 and not work.
In the second release of my rom i'll remake all link manually and fix it
Click to expand...
Click to collapse
what kind of rom are you cooking?
2.1, froyo or what else?
what about the camera?
2.1 with some programs and original splash screen included on framework.
Second step is fix app2sd.
I'm working hard for fix the camera problem!
P.S. i need the froyo rom but the link is not working...anyone have a copy plz?
ikxdf said:
2.1 with some programs and original splash screen included on framework.
Second step is fix app2sd.
I'm working hard for fix the camera problem!
P.S. i need the froyo rom but the link is not working...anyone have a copy plz?
Click to expand...
Click to collapse
yes I read your post but unfortunately I've not downloaded it yet
ikxdf said:
P.S. i need the froyo rom but the link is not working...anyone have a copy plz?
Click to expand...
Click to collapse
Here: http://rapidshare.com/files/393587306/update-nexusone-FRF50-noradio-signed.zip
Ok so im trying to install froyo 2.2 and this is the page im doing it from http://forum.xda-developers.com/showthread.php?t=686627
So i have a nexus one with the Htc Desire Software on it and i didnt know which one should i download so i picked the tweaked version and this is what i did i wipe it then flashed the zip and it just froze on the unlock symbol in the beginning so i had to reflash the Desire rom i had before which works so can someone please help me out thanks in advanced i think i did something wrong.
The files Cyan posted are NOT Froyo. What he posted are the files to get ROOT on an existing install of Froyo. Look for the FRF50 thread posted by paulobrien, flash that first,then flash the files by Cyan.
FaJu said:
The files Cyan posted are NOT Froyo. What he posted are the files to get ROOT on an existing install of Froyo. Look for the FRF50 thread posted by paulobrien, flash that first,then flash the files by Cyan.
Click to expand...
Click to collapse
Paul has an already rooted version of the rom without the radio update i believe. he shouldn't need to flash cyan's mod. unless he wants the kernel tweaks.
I was having random reboots with it so i went to paul, no reboots so far. =)
(i think it had something to do with setcpu, my cpu settings were 1113 and i dont think the cpu was supposed to go to that frequency so that may be why it was acting up.)
so what am i soppose to do?
Go to this page:
http://android.modaco.com/content/g...ed-update-zip-no-radio-option-online-kitchen/
It's pretty self explanatory but you can flash either FroYo with or without the radio update.
Here's a basic tutorial I wrote up with all files needed to update to froyo... Enjoy! Working 100% if you follow instructions as listed (haven't heard of an issue from others yet that tried it this way)
thanks man that worked i have one little problem how can u check if u have flash bcuz i try and see a video and sometimes it says u need an update so...
Cramazin said:
thanks man that worked i have one little problem how can u check if u have flash bcuz i try and see a video and sometimes it says u need an update so...
Click to expand...
Click to collapse
look up adobe in the market and download flash beta... it shows up for anyone using 2.2 (froyo)
If i install http://forum.xda-developers.com/showthread.php?t=1313650 my i9001 will be better at battery and more faster or it is only for desing .. ?
why dont u give it a try? u have nothing to lose, and flashing takes less than 10 minutes
if i install this ... i dont know how to back to old sys ... i dont know somethinks like a backup or somethinks and i want to know if is better to install or no ?
prologikus said:
if i install this ... i dont know how to back to old sys ... i dont know somethinks like a backup or somethinks and i want to know if is better to install or no ?
Click to expand...
Click to collapse
I think you can just reflash a stock ROM with Odin.
i'm new in android .. explain me what is reflash .. delete all application , games ?
Just take a look at my/sakindia's site.
http://sakindia123.prophecy.li/how-tos/install-cranium-rom-rc8
There is all written what you need to know.
I mean its not that hard. So i think you can do it also
For me -> http://forum.xda-developers.com/showthread.php?t=1457437
better as CR8 alway make my phone lag.
prologikus said:
i'm new in android .. explain me what is reflash .. delete all application , games ?
Click to expand...
Click to collapse
Reflash means flashing a ROM over your existing one. Deleting all user data is called wiping. If you're new, you should read the Wiki before doing anything with your phone.
rc4 installed working phone but email menu forced to closed :;((
rc8 odin end cwm mode installed i9001 not working
boot screen opening to restrart boot screen wipe all data not working
You just need another Kernel and flash it over RC8. Try v6 Kernel or Feamod 1.2/1.3/1.4.
Fr0zen1977 said:
You just need another Kernel and flash it over RC8. Try v6 Kernel or Feamod 1.2/1.3/1.4.
Click to expand...
Click to collapse
thanks man
rc8 cwm installed and v6 1900mhz kernel installed no proplem i9001 perfect working but
Sim Tool Kit stk.apk not installed stk applications not working
rc8cwm.zip/system/app/stk.apk I have integrated and install phone but not working
Hey guys, so i got my phone serviced yday and ever since im unable to use any of the Custom ROMS available.
I tried every possibilities, but some how even though im able to install it via recovery, im unable to enter the ROM due to the continuous Boot loop without any animations too.
But im able to FLASH the Normal Stock Roms as many times as i want.
Never experienced this trouble before at all.
Please help/guide me to resolve this issue.
Unable to use my phone without Custom ROMS.
Thanks in advance!
at least can someone give me all their files that comes when u plug in the phone into Polling mode??
thanks!
I don't think you need that.
Check the kernel version of the stock Rom you have and the custom Rom you want to install. They have to be the same version or you will continuously be getting boot loops.
Sent from my FIH-FB0 using xda premium
wesleyel said:
I don't think you need that.
Check the kernel version of the stock Rom you have and the custom Rom you want to install. They have to be the same version or you will continuously be getting boot loops.
Sent from my FIH-FB0 using xda premium
Click to expand...
Click to collapse
hmm... wokay.. i downloaded 0.3b kernel of CK and flashing it from recovery!
is that fine for elol's ICS??
EDIT: i tried ur suggestion tooo.. the phone still is stuck with the boot screen.. doesnt proceed at all after that! T_T
the pranam said:
hmm... wokay.. i downloaded 0.3b kernel of CK and flashing it from recovery!
is that fine for elol's ICS??
EDIT: i tried ur suggestion tooo.. the phone still is stuck with the boot screen.. doesnt proceed at all after that! T_T
Click to expand...
Click to collapse
Kernel != ROM
Apparently you got your phone back from service with a GB load, that has kernel 2.6.32. You can not flash a newer release (Sharp, RC3 or ICS) that uses a newer kernel 2.6.35 with recovery. To do so you need to flash with SUT.
http://forum.xda-developers.com/showthread.php?t=1288293
mmaacc said:
Kernel != ROM
Apparently you got your phone back from service with a GB load, that has kernel 2.6.32. You can not flash a newer release (Sharp, RC3 or ICS) that uses a newer kernel 2.6.35 with recovery. To do so you need to flash with SUT.
http://forum.xda-developers.com/showthread.php?t=1288293
Click to expand...
Click to collapse
Hm.. thanks a lot mmaacc.. Finally my issue has been resolved.
Been breaking my head for the past 48 hours to somehow get back to Custom ROM..
Thanks a lot really! \m/
btw the reason i had given it for servicing was because the camera wasnt working..
and now the camera problem got solved. but now i notice again after changing the kernel, i have the same camera issue still..
has the kernel got anything to do with the camera?? may be thats why the service center changed the kernel?? wierd!
the pranam said:
btw the reason i had given it for servicing was because the camera wasnt working..
and now the camera problem got solved. but now i notice again after changing the kernel, i have the same camera issue still..
has the kernel got anything to do with the camera?? may be thats why the service center changed the kernel?? wierd!
Click to expand...
Click to collapse
Many ported ROMs have issues with certain features. The camera, radio or HDMI are all-time favourites here . Read the release descriptions before flashing to see what works and what not.