Hi! I unlocked bootloader and installed naaKernel v08. im happy with it but im having one issue. Sometimes (like 1 time per day) my screen "overlapps" like in the image bellow, after i reboot phone its ok though. Is anyone having this problem too?
Thank you
Have you tried fullwipe? Perhaps it's not about Karnel!
Sent from my E15i using XDA App
which rom have you? i think this is rom problem
what is the ROM you are using?may be it's a problem with the launcher too as I think.do you use SE thing as in the photo
It happened with both MiniCM7 and GingerXperiaRay both latest version and with full wipes beetween instaling roms. I think its a kernel bug also because when i installed this kernel i had stock rom and CWMRecovery had this "cuts" in the screen too.
Im thinking of changing to GDX with Alfs kernel though i like GingerRay =s
Same thing happened to me in the Recovery with Naa v08.
It's a kernel bug, you'll have to endure it...
Or try an other kernel like Alfs or linuxDX with an other ROM
Sent from my E15i using XDA App
dragxr said:
Hi! I unlocked bootloader and installed naaKernel v08. im happy with it but im having one issue. Sometimes (like 1 time per day) my screen "overlapps" like in the image bellow, after i reboot phone its ok though. Is anyone having this problem too?
Thank you
Click to expand...
Click to collapse
Enable boot animation in options.
In another thread nAa say this as a cure
I have the same proble after flashing nAa7 to nAa8
Sent from my E15i using XDA App
No more screen cuts since i activated boot animation =D
Related
the requirements stated :
Requirements
- Rooted
- ClockworkMod Recovery (v014+)
- Latest kernel and latest baseband xxx015
which means now i have to update my x8 to latest 2.1 eclair, and the root and install CWM recovery, and no need to unlock bootloader? no need to flash custom kernel? stock kernel can do just fine?
Yea...if u havent root, use stock rom,2.1 eclair (not like u have other rom),root,install xrec or CWM, then flash Gingerdx ( follow the instruction at gdx thread)
Sent from my XPERIA X8 using XDA App
so i dont need to unlock bootloader and install custom kernel? awesome! coz i don like to do so
nop just have that on your cel and you can flash it, and remember making a full wipe for better results on the rom
Just root, install CWM, and flash the rom, modded kernel is not required
Do not install GingerDX with xRecovery, it will have bugs if you do, use CWM and before you install the rom, do a full wipe.
Sent from my X8 using XDA App
Facing a Problem on gingerdx on Linuxdx,
Used this combination for last 2 wks had no problem, today I activated the 3g on it,
Now the Market App is not working, Internet is quite slow, Apps are not downloading and restarts.
It is not so that i have not updated apps, I used to do the same by Wi-Fi Hotspots,
Can somebody help me on this,
rom and kernel
To flash KERNEL you need unlock bootloader.
To install ROM you need root + recovery.
JBolho said:
Just root, install CWM, and flash the rom, modded kernel is not required
Do not install GingerDX with xRecovery, it will have bugs if you do, use CWM and before you install the rom, do a full wipe.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Excuse, but I installed it with xRecovery and I have no bugs. I only feel that battery draining is higher than stock ROM, but that's all. I've used it for a week without problems.
El Brillantinas said:
Excuse, but I installed it with xRecovery and I have no bugs. I only feel that battery draining is higher than stock ROM, but that's all. I've used it for a week without problems.
Click to expand...
Click to collapse
i also installed it with the xRecovery but i had alot of bug until i installer it with CWM buy strangely i have only 1 bug whit all the roms (without counting battery drain in some of them) it's the camera after having the room like 14 hrs when i put tehe cmaera it appears a black grid :S in the gingerDX there were only 8 lines all in the middle anyone knows why?
Wing00w0 said:
i also installed it with the xRecovery but i had alot of bug until i installer it with CWM buy strangely i have only 1 bug whit all the roms (without counting battery drain in some of them) it's the camera after having the room like 14 hrs when i put tehe cmaera it appears a black grid :S in the gingerDX there were only 8 lines all in the middle anyone knows why?
Click to expand...
Click to collapse
Maybe its priblem with your camera, because its a strange problem
Sent from my XPERIA X8 using XDA App
dsaklein said:
Maybe its priblem with your camera, because its a strange problem
Sent from my XPERIA X8 using XDA App
Click to expand...
Click to collapse
how do i check if the camera it's the problem?
really i don's have any idea obviously with the stock no problms but only appears with the roms sometimes they don't appear(lite 2 of 20 :S) i can take photos they dont appear with the grid lines...
kumarv said:
Facing a Problem on gingerdx on Linuxdx,
Used this combination for last 2 wks had no problem, today I activated the 3g on it,
Now the Market App is not working, Internet is quite slow, Apps are not downloading and restarts.
It is not so that i have not updated apps, I used to do the same by Wi-Fi Hotspots,
Can somebody help me on this,
Click to expand...
Click to collapse
Did.somebody faced this problem?
Sent from my Shakira using XDA Premium App
google account won't sync
Can someone help me? my google account isn't synchronizing. Can't get my contacts neither gmail.
What should i do? i got GingerDX + stock kernel and not yet installed Timescape
Any suggestions?
imrano1210 said:
the requirements stated :
Requirements
- Rooted
- ClockworkMod Recovery (v014+)
- Latest kernel and latest baseband xxx015
which means now i have to update my x8 to latest 2.1 eclair, and the root and install CWM recovery, and no need to unlock bootloader? no need to flash custom kernel? stock kernel can do just fine?
Click to expand...
Click to collapse
u can use with stock kernel too, if u wanna use custom kernel then u need to unlock bootloader, and all gingerdx roms v14 and above needs to be installed with cwm
go to settings/ Accounts & Sync and hit auto-sync or down on list hit on gmail account
I have cwm 3.2.0.0 is the same thing with cwm v014+???
Hi,
I am using W8 and using the custome ROM GingerXperia V22 which is beautiful and i really like it. Only thing i am having issue is the call screen lag, When i receive the call or call a contact,all i see is a black screen for couple of seconds. Any idea how to overcome this?
its because you use stock kernel+gingerxperia. same happens with stock+gingerdx
flash alfs06 kernel which i believe is compatible with both ROMS: gingerxperia and gingerdx
i have that problem to with v22 and stock kernel. is there an solution without a custom kernel cause i am afraid of unlocking the bootloader cause chance of simlock and brick
whats your phone date? if it is less than 11W29 and you know to read a few steps in english, you will be fine
pesky_89 said:
whats your phone date? if it is less than 11W29 and you know to read a few steps in english, you will be fine
Click to expand...
Click to collapse
You are right it just seems to be very hard, but after all it takes only 5 minutes to unlock and install custom kernel....i know it coz iv just do it...
you could try apps from the market like Go Contacts ...works well for me!
V23 update
Mi new version is update
flash alfs kernel..
it solves the problem
Can you pls put the link where i can know how to flash the kernels?? tks for the reply.
ghost9685 said:
Can you pls put the link where i can know how to flash the kernels?? tks for the reply.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1340861 - ALFS
http://forum.xda-developers.com/showthread.php?t=1350484 - NAA
please make use of the SEARCH BUTTON next time...
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
i restore my x8 with seus before every rom change
przemek4113 said:
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
Click to expand...
Click to collapse
yes i like alfs kernel and gingerdx & gingerxperia, but gingerxperiaray is the best for me but i have this problems
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
proN1low said:
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
Click to expand...
Click to collapse
Ya, it was the problem with the kernel version 08b
but now version 09 has been released...and the issue has been fixed i myself using it...
wilbso said:
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
Click to expand...
Click to collapse
yes i tried
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
hi i followed your post but i does'nt work for me and
it bootloops, sometimes it stuck at nAa kernel logo.
this couple week,, i hv this problem..
its never happen b4..
idk why its happen..
my kernel is nAa 11
proN1low said:
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Click to expand...
Click to collapse
I believe MiniCM7 2.1.9 is out, alongside nAa 11 kernel. The ROM has been thoroughly used by the community and most issues thrashed out. That's asides being a vast improvement over MiniCM7 2.1.6
I suggest you upgrade.
Hello there, i have a problem with gingerDx v29, im using v28 atm with alfs v09a, so far so good, but when i instal v29 i get a com.android.phone error as soon as i put the ping and then the error keeps looping. i tryed re-instal, wipe data, (wipe everything that i could with CMW actualy) but it still doesnt work, i read the forum in order to find an answer but didnt find it with this SO, (also tryed a solution that seams to work in others so like fix permisions). How do i solve this?
I really hate to bother but its been 5 days and i can make it work.
Thanks in advance!
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
update Ginger DX v29
Hello i am a new user asking about the update of DX v29. i recently purchased X8 having
Configuration .
Model no E15i ,
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
it worked!
playjun said:
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
Click to expand...
Click to collapse
thanks man, that was the problem, i cant belive i didnt saw that, thanks a lot
And for the guy asking a guide this is what i did:
download the alfs v09a kernel right in the rom page
download the rom
download the libsensor patch
download the addon
put the rom, the libsensor patch and the addon in ur sd card
flash the kernel
start in cwm
go to instal zip option, instal the rom, the libsensor and the addon
restart
enjoy
i just did it and its working fine but im finding a strange bug though, my screen seams to be moving a little bit to the left everytime :X
when i fix it i let you know how xD
Thanks again to playjun _o_
(Q) overclock in GingerDX V29 dont work?
Hi, I was trying to place GingerDX v29 overclock and does not work, any suggestions?
sorry my english,
problem
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Answer
terrordroid said:
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Click to expand...
Click to collapse
open it by touching the screen on the Sony Ericsson logo.
GingerDX v029 version selection help
First of all thanx to all
by reading a lot of stuff in this forum .successfully root the phone and install xrecovery and its working .
but i have some confusion about the
[
1 .GingerDX-v029-shakira-stock.zip GingerDX v029 nAa/alfs
2. GingerDX-v029-robyn.zip GingerDX v029 for robyn
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
The confusion is which one is for my xperia X8 .
Please help me for this My xperia configuration is
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
Hey man... ur x8 also knwn as shakira... use that rom
Sent from my X8 using xda app-developers app
stone009 said:
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
Click to expand...
Click to collapse
get the number 3 (i think your still in lock bootloader) and dont forget the addons.and read the standard procedure.goodluck
sent from my x8™ using gingerDX®
The diferent versions are for diferent kernels, for example im using Alfs kernel so i instal the number 1, i think u still using stock kernel so instal the stock one, the number 3
if you have any problems you can allways find the default rom and flash it back or try another one
Good luck
need help
(3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2 is for my x8 .
do i need the update Kernel version ?
or its work on my original configuration as below
My xperia X8 configuration is
Rooted by Superoneclick.
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
get that number 3
and addon( standard settings for stock and superuser ) and read some fix in the thread...
opps your on 11w22?
read a bit about unlocking bootloader.
sent from my x8™ using gingerDX®
alfs v9a
im having a little screen moving problem, i think its the kernel alfs v9a, i'll try v8 and let you know
Edit; Alfs v8a solves the problem
Hey guys i'm having the same problem with the screen moving bug, it moves to the right a little bit. I tried alfs v8 and it solved the problem but I still don't think it's the best answer since the combo gdx v29 and alfs v8 has A LOT of battery drain on 3g and sync on (in 8 hours it drains 90 percent of the battery just in standby).
Is there any other thing I can do to fix this screen problem? If not i'll just go back to stock kernel
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
cascabel said:
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
Click to expand...
Click to collapse
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Sorry. I meant 691.
Sent from my rooted tomato using xda app
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Try other frequencies
Sent from my X8 using xda premium
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
SOLVED - Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
g3ar said:
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
Click to expand...
Click to collapse
You should consider trying Pengus' CM10 ROM. I don't think you can find more stability in custom ROMs than his
You'll love the ROM, just give it a chance
But remember to do a full wipe (wipe system, data, cache and dalvik) before flashing the ROM.
Edit: You'll also find out bluetooth works perfectly fine on his ROM where the more recent ROMs don't have this fully functional.
So theres no fix type what shoud i do ?
Baseband 1035,21_20121130 . Kernel 2.6.39.4
Strange, BSODs should be a thing of the past. In most cases it was the kernel. Are you sure you flash the latest ROM versions with latest Kowalski kernel? Try to flash KK after ROM. If it doesn't help, phrase describe the problem more thoroughly. When is BSOD happening? During call?
Sent from my LG-P990 using xda app-developers app
So on stock v30a i dont have problems at all. I use aio toolkit option 4 .then install THE ROM tonyp. Bsod happens when i apply charger
Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
Sent from my LG-P990 using xda app-developers app
Man it looks like you solved my nightmare ! THANKS
Hi there,having similar problems using cm10.2 and all roms ,When phone times out its battery removal time,hot plug enabled but still turning off!Any help would be much appreciated thanks Glenn