Related
Hey everybody i have a question i was originally using Froyo Yoshi 1.7 OMG and everything worked great but then i switched to 1.7 micro and the wifi didnt work it turned on, scanned, turned off, turned on, scanned, and so on... so the i went to recovery and used super wipe and the installed 1.7 OMG again and the wifi still dosent work..
Please some body help me!!!!!!!!!!!!
You do know that yoshi fix that problem already right?
Download the new 1.7.1micro and wipe then flash
Sent from my HTC Magic using XDA App
crazysohc said:
You do know that yoshi fix that problem already right?
Download the new 1.7.1micro and wipe then flash
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
yeah well i got i fixed this morning there was some thing wrong with the super wipr so i manually wiped it all and then in reinstalled it
but now its working
Thnaks thougth!
Can't figure out with its doing this, ran about 4 different rims, all seaming to have the skipping problem. Other than the skipping, everything is working fine ..?
HELP PLEASEEE.
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Can't figure out with its doing this, ran about 4 different rims, all seaming to have the skipping problem. Other than the skipping, everything is working fine ..?
HELP PLEASEEE.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
FdxRider said:
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
Click to expand...
Click to collapse
I tried running cm6.1, cm6.2, aospGBmod.2 and aosp9.9.2, all with the decafuct 691mhz capped kernal. Fail.
So I tried running aosp9.9.2 with the decafuct 768mhz kernal. Works amazingly. Thanks for the help man!
I <3 XDA and all the great folks here :]
Sent from my HERO200 using XDA App
alexdemonumber3 said:
I tried running cm6.1, cm6.2, aospGBmod.2 and aosp9.9.2, all with the decafuct 691mhz capped kernal. Fail.
So I tried running aosp9.9.2 with the decafuct 768mhz kernal. Works amazingly. Thanks for the help man!
I <3 XDA and all the great folks here :]
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
No prob glad I could point you in the right direction ,which kerenel comes with that rom I'd just like to know.Thanks
FDX
NVM I found out THX
FdxRider said:
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
Click to expand...
Click to collapse
FdxRider said:
No prob glad I could point you in the right direction ,which kerenel comes with that rom I'd just like to know.Thanks
FDX
NVM I found out THX
Click to expand...
Click to collapse
Yup, bumping up the min frequency will fix it
About that kernal, I don't know which one is default on aosp froyo 9.9.2 cause I flashed 768mhz decafuct right after I installed the rom :[
Sent from my HERO200 using XDA App
It's ok ,I found out but I appreciate the response back.
alexdemonumber3 said:
About that kernal, I don't know which one is default on aosp froyo 9.9.2 cause I flashed 768mhz decafuct right after I installed the rom :[
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Sent From My Pedal-to-the-Metal Hero!
Can you give me info for your full Hero setup(rom, kernal, radio, etc.)? Im not a pro so I wanna see if I can push this sucker faster lol
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Can you give me info for your full Hero setup(rom, kernal, radio, etc.)? Im not a pro so I wanna see if I can push this sucker faster lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Nfinite's .2 stk rom,Decad3nce's Decafuct #589kernal 691mhz(you can use his 768 kernel) to get it to 768 you have to use his battery tweak,oc widget,or set cpu, latest radio .29 I believe.I strip all sprint bloat out,a2sd is enabled and set to zip-align apps on boot. I think thats it if I come up with more will edit this post.
Huge breakthrough. I'm running cm6.1 right now and using overclock widget and I figured out the fix for this is the cpu frequency update interval setting. If set for a long period of time, it doesn't seen to skip as much!
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Huge breakthrough. I'm running cm6.1 right now and using overclock widget and I figured out the fix for this is the cpu frequency update interval setting. If set for a long period of time, it doesn't seen to skip as much!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Great,glad to hear your Hero is rockin now!
i had this same problem when i switched to CM6.1 BlackMod it was really embarrassing when i had it hooked up to the Speakers at work and it kept skipping and a coworker had to plug up his VZW Droid.
quick fix was changing setCPU to Performance and not onDemand. i see you have your problem fixed just thought this would help anyone in the future.
Android Ver - 2.2.1
Baseband Ver - 2.42.02.10.29
Kernel ver - [email protected] #4
Mod Ver - CyanogenMod-6-05DEC2010-BLACKMOD
I also have Collin_ph_battery_Tweak_v3_rc2 installed
Good one Thanks for jumpin in there with extra info
How do I remove the adrenaline because I heard it helps battery
biumpp1111
iamjerry123 said:
How do I remove the adrenaline because I heard it helps battery
Click to expand...
Click to collapse
Should be able to reflash Gingervolt 1.3. I think it has adrenaline in it, but 1.3 is so stable and smooth. I tried a couple of the additional tweaks beyond 1.3, and honestly came up with sluggish results. If you want to save battery, you can go into your programs, and turn off the auto start options. There are a lot of programs that suck up your ram, and you can turn them off. Turn off most of your automatic options. Auto bright. If you constantly have wifi on, you can go into your scripter, and space out how often it pings with a wifi source. You can go in and change your LCD density (if you do that, you will need to adjust it to download from the market)
So, if you are running Gingervolt 1.3 and have done no other tweaks, right now, you are using a pretty battery friendly ROM. If you tweaked beyond that and you are experiencing issues, just reflash 1.3. You will need to reflash Blitz too.
markapowell said:
Should be able to reflash Gingervolt 1.3. I think it has adrenaline in it, but 1.3 is so stable and smooth. I tried a couple of the additional tweaks beyond 1.3, and honestly came up with sluggish results. If you want to save battery, you can go into your programs, and turn off the auto start options. There are a lot of programs that suck up your ram, and you can turn them off. Turn off most of your automatic options. Auto bright. If you constantly have wifi on, you can go into your scripter, and space out how often it pings with a wifi source. You can go in and change your LCD density (if you do that, you will need to adjust it to download from the market)
So, if you are running Gingervolt 1.3 and have done no other tweaks, right now, you are using a pretty battery friendly ROM. If you tweaked beyond that and you are experiencing issues, just reflash 1.3. You will need to reflash Blitz too.
Click to expand...
Click to collapse
So I could just flash it over with what i already have right? and that would just overwrite whatever i have? and would i need to back uip my apps etc?
iamjerry123 said:
So I could just flash it over with what i already have right? and that would just overwrite whatever i have? and would i need to back uip my apps etc?
Click to expand...
Click to collapse
Always do a backup. You never know what can happen. Yes, reflash gingervolt 1.3 and then the blitzkrieg. Don't forget when you reboot the phone it will be set at the 1.0 speed, so you will have to go to setcpu, or whatever you use and adjust it accordingly.
Sent from my VS910 4G using xda premium
Reflashing gv 1.3 did not reset the supercharge it just removed the rc5 for me
Sent from my VS910 4G using xda premium
revo1185 said:
Reflashing gv 1.3 did not reset the supercharge it just removed the rc5 for me
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
I think that's what I talked him into doing. Rc5 didn't work for me either.
Sent from my VS910 4G using xda premium
i dont have super charge.
plus would this remove all my apps? flashing it over
iamjerry123 said:
i dont have super charge.
plus would this remove all my apps? flashing it over
Click to expand...
Click to collapse
If you're on gingervolt 1.3 it already has super charger built into it. It won't remove your apps unless you do factory data reset.
Grizzy3 said:
If you're on gingervolt 1.3 it already has super charger built into it. It won't remove your apps unless you do factory data reset.
Click to expand...
Click to collapse
so flashing over gingervolt 1.3 won't do anything except take off adrenaline shot?
iamjerry123 said:
so flashing over gingervolt 1.3 won't do anything except take off adrenaline shot?
Click to expand...
Click to collapse
Correct. I read the OP for gingervolt and it doesn't have adrenaline shot, so you will be good.
Sent from my VS910 4G using xda premium
markapowell said:
Correct. I read the OP for gingervolt and it doesn't have adrenaline shot, so you will be good.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
so i wouldnt need to backup my apps? haha
iamjerry123 said:
so i wouldnt need to backup my apps? haha
Click to expand...
Click to collapse
If you clear cache/ dalvik and flash gingervolt I believe you will lose any theme and any other tweak you may have flashed (like supercharger and adrenaline shot). Other than that, it won't get rid of your apps unless you do a factory reset.
To be more clear, go to cwm, wipe cache, then dalvik, then flash gingervolt. Reboot. Then you can go back to cwm and flash any theme or tweak you want to add on.
Shouldn't you wipe data/factory reset in cwm before flashing to get a pure and more while flash am I wrong
rocknrolla818 said:
Shouldn't you wipe data/factory reset in cwm before flashing to get a pure and more while flash am I wrong
Click to expand...
Click to collapse
If you don't mind losing all your data then ya that would be the best way to go. But it's not needed. I've never done that and everything has flashed fine for me.
Every night my phone reboots and goes into clockwork mod recovery on its own. I don't know if I set it up accidentally or if it did it on its own. I want it to stop because even plugged in to charge the battery gets drained. Help please. I'm running gingervolt 1.3
Sent from my VS910 4G using XDA
chefmp said:
Every night my phone reboots and goes into clockwork mod recovery on its own. I don't know if I set it up accidentally or if it did it on its own. I want it to stop because even plugged in to charge the battery gets drained. Help please. I'm running gingervolt 1.3
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
Sounds like your phone is trying to auto update to zv8 but it cant because you have cwm. You need to freeze the update or update it using mts new easy method found in development section
Sent from my VS910 4G using xda premium
It's doing that because of the latest LG Update to ZV8
Sent from my VS910 4G using xda premium
Once again, here we go. ********{this for the V9 software update. you can check software versions from the settings, about phone menu from your revo}***********
################################ FLASH AT YOUR OWN RISK ##############################
Got the stock kernel from the latest LG/Verizon update V9.
Enjoy!!!!!
Download
Instructions: Download, boot cwm, flash, roboot, cook dinner, shower, do some laundry, save the world..... :victory: Have fun!!!!!!
## REMEMBER: give things time to settle. Things will get better, with the exception of horse power
NOTE: installation will wipe dalvik-cache. First boot will be looooooooooong, and mostly blank. Don't get scared. The stock 4G boot ani plays then screen goes blank for looooooooooooooong boot. Working on the boot ani thing.
****Any issues, Holla****
Edit: for some unknown reason, at least to me, your boot ani will be erased. Reinstalling does not work. Working on fix.
Edit: super user might have issues after installation. CWM 6.0.1.1 detected the error and corrected it for me. If you don't get an error on 'su' from cwm, then just reboot like normal and you 'may' have to reroot. easy work-around for now Does not affect cwm..
I haven't tried it but I aim to. Getting rid of the stock boot sound (annoying and obtrusive) would be great! Thanks for sharing your work.
Sent from my Transformer Prime TF201 using Tapatalk 2
Appreciate it mane. no sound on the boot. Just the ani, the 4g, purple, swirly thing.
Sent from my VS910 4G using xda app-developers app
I don't know a ton about how kernels and roms work with each other so sorry for the noob question...
Does this work with both the stock ROM and Broken Out? And would it interfere with a future ota update?
Thanks for your work!
The Kraken! said:
I don't know a ton about how kernels and roms work with each other so sorry for the noob question...
Does this work with both the stock ROM and Broken Out? And would it interfere with a future ota update?
Thanks for your work!
Click to expand...
Click to collapse
You should be fine either way. This is a direct rip from a Nan droid. I just packaged it together
Sent from my VS910 4G using xda app-developers app
Ah, great, and thanks again!
I.M.famous XMAN said:
no sound on the boot. Just the ani, the 4g, purple, swirly thing
Click to expand...
Click to collapse
Thanks for the clarification.
Sent from my VS910 4G using Tapatalk 2
Will this work if still on v8?
I'd make a back up first, but I don't see why not. There wasn't that much of a difference from v8 to v9. Let me know if you run into problems, if you try it. I'm just curious.
Sent from my VS910 4G using xda app-developers app
Hey, I just got a VOD on this kernal. Could it be because the minimum clock setting was too high or something? Thanks!
EDIT: Just got another
Sent from my VS910 4G using xda premium
I.M.famous XMAN said:
I'd make a back up first, but I don't see why not. There wasn't that much of a difference from v8 to v9. Let me know if you run into problems, if you try it. I'm just curious.
Sent from my VS910 4G using xda app-developers app
Click to expand...
Click to collapse
Both Titanium Back up and ROM Manager Pro get hung up, even after re-installing them, and I already got a screen freeze lol, guess its back to blitz. I'll try this again if I ever update to v9
Idk. I don't think it has anything to do with clock speed. I'm beginning to think vod is just a revo issue.
Sent from my VS910 4G using xda app-developers app
I haven't had a problem, works just fine. Thanks!
Sent from my VS910 4G using xda app-developers app
Also want to add that I have seen a better battery life compared to the BO 2.0.1.
Sent from my VS910 4G using xda app-developers app
I too have better battery life. Down only 9% over 5 hours of normal use. Would be down around 20% before.
But I still get screen freeze, but no VOD.
Sent from my VS910 4G using xda premium
Good to hear. Still trying to figure out what's causing the screen freeze. And still working on being able to change the boot animation.
Sent from my VS910 4G using xda app-developers app
Not sure if this is an isolated incident but after using this stock kernel, I got Superuser (Elite installed) lockup and FC'ing. I couldn't get any root app to work. SU binary is latest v3.1.1 (17). I reverted to my latest BO v2.0 nandroid and all is fine again.
Only recent change I could think of prior was an updated Root Explorer which was coincidentally the first root program I attempted after. It err'd saying it was waiting for SU access and needed to be restarted, but that changed nothing. Neither did clearing SU and SU Elite data.
Sent from my VS910 4G using Tapatalk 2
Not sure if this is an isolated incident but after using this stock kernel, I got Superuser (Elite installed) lockup and FC'ing. I couldn't get any root app to work. SU binary is latest v3.1.1 (17). I reverted to my latest BO v2.0 nandroid and all is fine again.
Only recent change I could think of prior was an updated Root Explorer which was coincidentally the first root program I attempted after. It err'd saying it was waiting for SU access and needed to be restarted, but that changed nothing. Neither did clearing SU and SU Elite data.
Sent from my VS910 4G using Tapatalk 2
Click to expand...
Click to collapse
I actually noticed the same thing. so I just ran that all in one easy root for V8/V9 tool and ran the root option. no problems since.
http://forum.xda-developers.com/showthread.php?t=1630821
Sent from my VS910 4G using xda app-developers app
Honestly, now that you mention it I did notice that. Now that I look through the cwm logs, I see I had a su error while flashing. Apparently, the new cwm fixed it. Hmmm. Same for the wifey.
Good to know that root is still attainable.
Sent from my VS910 4G using xda app-developers app
Quick question. I followed the directions, going to cwm and installing this zip. When it comes back on, I go to about phone and it still shows it's on zv7. Is it ok to install the latest broken out revo, or is it safe to assume it didn't actually install zv9? I was previously on gingervolt zv7, any suggestions?
PS thanks for providing this btw!
Sent from my VS910 4G using xda app-developers app