Database Develop

[Q] Hey guys, touch key's not working. [firmware]

I have been using some custom rom's around here, Doc's and some Darky's and they were perfectly fine.
Some days ago, I started the SGS Tools application, and got to the "Secret codes".
I was just curious about it, and I got into the "Touch key firmware version"
So there was 2 options, to upgrade the Touch key, or the touch screen.
I pressed the touch key, and then the screen said "PASS" and boom !
The touch keys stopped working.
I tried everything, wipe all, flashing back to 2.1, then back to Darky's, and Darky's Odin. Nothing is working.
It's a driver problem as it seems, can anyone, anyone please help me?
Thanks, I will be so greatful!

I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source: http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html

xlittle_lambx said:
I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source:
Click to expand...
Click to collapse
Hey mate.
Thanks alot! but it doesnt work.
I flashed about 3 rom's. 2.1 rom, original from my country 2.2 rom,
and allways did fw update, but none working.
What can I do?!?

Did you do a complete clean install of your stock rom? What I mean by that is you wipe data/factory reset before and after you flashed your phone's stock rom. As the guide I linked utilized a carrier stock 2.2 rom, try flashing the carrier stock 2.2 for your phone. Wipe data/factory reset in recovery mode, and try the firmware update again via dialer *#*#2663#*#* and select "Touch key FW update" . Reboot your phone.
I have the Bell Mobility I9000M model, as the guide is intended for, but it should work on the international version as well (I'm assuming you are from Asia or Europe?)
Hopefully your touch key issue will get resolved, if not by me, then someone else with more expertise in this forum.

Yes, I have tried all those, but nothng helps.
Someone can help please? thx

help please?

help? please

I have exactly the same problem.##Help

help guys.. please

I have also this problem : (

Has no one any other solution for this problem ?!

Lot's here got this problem, please if someone know's how to fix the problem, please help us all. I tried all, I tried any 2.1,2.2,2.3 rom out there, the JM9 [that shouldve fixed my problem] but non helps.

I finally managed to solve the issue by reflashing to a stock 2.2.1 and using the ##code thingy.

duckbill22 said:
I finally managed to solve the issue by reflashing to a stock 2.2.1 and using the ##code thingy.
Click to expand...
Click to collapse
can you please give me the exact rom you downloaded? thanks.

I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source: http://androidforums.com/galaxy-s-al...imal-risk.html
__________________
Download Software

returnix said:
can you please give me the exact rom you downloaded? thanks.
Click to expand...
Click to collapse
The ROM in question was: I9000UGJH2
Sorry, I had to get home to look this up as I only used this ROM to solve the issue and went straight back to Darky 9.3.
I hope this helps

duckbill22 said:
The ROM in question was: I9000UGJH2
Sorry, I had to get home to look this up as I only used this ROM to solve the issue and went straight back to Darky 9.3.
I hope this helps
Click to expand...
Click to collapse
man
thanks you
so much, I really dont know how to thank you.
I will open a thread that will explain to all that this problem happend to them too.
THANKS!

Ditto, I had the same problem, bought the phone from a guy and it already had a custom firmware on it. I screwed up the menu and back keys by upgrading the touch key firmware.
I eventually found this thread, upgraded (or rather rolled back) to the original firmware (in my case I9000UGJL2) and re-applied the touch keys firmware upgrade and voila now my keys work again after a month or two of pulling hair.

nice work and lots of thanks
After a painstakingly long search (upwards of 5 hours, gee thanks SOPA) I finally got ahold of original firmware, flashed and followed the post, worked great Thx! BTW this was for a Canadian Bell GT-I9000M, which I flashed to KC1 to get to work if anybody has similar original firmware finding issues, (took a few trial and errors)

I have the same problem on my galaxy mini, anybody know a galaxy Rom that fix my problem?

Screen wont wake after call on any Gingerbread

Hello.
Im having the weirdest problem and i am going insane.
In Gingerbread roms,stock or custom (darky rc3,rc4,CriskeloRom) when i try to make a call or when i receive a call,the screen turns immediately black and never ever wakes up.
No button works,nore do they lit,nothing...
I have to pull out the battery and restart.
Some times when i plug the cable in kies mode,its ok,it comes back the screen but thats seldom.
I tried to keep the screen on,nothing...
This happens only in gingerbread,if i return to froyo,everything is ok.
PLEASE HELP ME

Wait for official Gingerbread .
jje

You could try installing the official (NEE) Gingerbread.
Or flash back to 2.2 and forward from there.

thanx guys but did that too...
i installed official ginger xee and the same thing...in froyo everything works ok.
insane!!!!

Sucks to hear Hope it will be ok when the official Gingerbread gets released for your country. Allthough that probably wont work either.
ps. how do you update from Froyo to Gingerbread? Odin? Maybe try updating from Froyo with KIES using the registry spoofing tool and then installing NEE.
http://forum.xda-developers.com/showthread.php?t=835628

No such issues for me, had stock JVK now on stock JVB. Remove any lag fixes and do a factory reset + Format SD card and try.

i have done everything!!! everything.im no noob in flashing bussiness.
i have tried almost all roms in xda in froyo,i like flashing but that is one of its kind...
i dont know...i will wait for a fix(?).
maybe an update version on ginger?
i repeat,in froyo or even eclair,everything works perftectly.
i even restored my efs file,my csc code...nothing...

karapoutsoglou said:
Hello.
Im having the weirdest problem and i am going insane.
In Gingerbread roms,stock or custom (darky rc3,rc4,CriskeloRom) when i try to make a call or when i receive a call,the screen turns immediately black and never ever wakes up.
No button works,nore do they lit,nothing...
I have to pull out the battery and restart.
Some times when i plug the cable in kies mode,its ok,it comes back the screen but thats seldom.
I tried to keep the screen on,nothing...
This happens only in gingerbread,if i return to froyo,everything is ok.
PLEASE HELP ME
Click to expand...
Click to collapse
I have the same problem, I give it up ! now I flash back to froyo.

Try reflashing and not installing any apps at all see if that problem exist?

tanjiajun_34 said:
Try reflashing and not installing any apps at all see if that problem exist?
Click to expand...
Click to collapse
yes,still exists...
i am now again in foroyo,darky v9.5 extreme.everything smooth and perfect...
dunno...maybe is greece network? nahhh...
i dont know...
i will wait till ginger gets mature and try in a month or something a newer custom rom.

[Q] JVP 2.3.4 Force Close

Stock JVP 2.3.4 on Galaxy S
Getting FC on com.android.phone after a phone call 2-3 times a day (~ every 10 calls)
Getting FC on messaging and receiving SMS (rare)
Still happens after a full wipe
Anybody else experiences the problem?
Any more FC on JVP?
Thanks!

No fc here have you installed any thing

ochakov said:
Stock JVP 2.3.4 on Galaxy S
Getting FC on com.android.phone after a phone call 2-3 times a day (~ every 10 calls)
Getting FC on messaging and receiving SMS (rare)
Still happens after a full wipe
Anybody else experiences the problem?
Any more FC on JVP?
Thanks!
Click to expand...
Click to collapse
I'm having the same issue too for com.android.phone. EXACTLY the same as u. I lose signal for a few secs then it's ok again.

Look in the "Stock 2.3.4" thread, there is a cmw.zip with a fixed Phone.apk, just flash it via CWM...

ukdtweak said:
Look in the "Stock 2.3.4" thread, there is a cmw.zip with a fixed Phone.apk, just flash it via CWM...
Click to expand...
Click to collapse
Sorry can't find it can somebody post it here.i am also having this problem with jvp, thanks
Sent from my GT-I9000 using XDA App

same problem here!!

deadwarrior said:
I'm having the same issue too for com.android.phone. EXACTLY the same as u. I lose signal for a few secs then it's ok again.
Click to expand...
Click to collapse
the same issue for me too

Should be this Page 54 in the thread
Next time you may should effort more time and search for it by yourself instead of letting others do that

with witch kernel are you??

I have the same problem!!!!!!!

barvna said:
I have the same problem!!!!!!!
Click to expand...
Click to collapse
your kernel??

I also get this on JVH (and JVB before that) - always phone dialler searching for contacts by entering digits. Also using Go SMS or stock SMS client it sometimes happens.
CF Root.
I have even flashed 2.2.1 and upgraded to 2.3.3. though Kies. Still the same. It's driving me nuts.

Same fc issue. I had to revert back to 2.3.3 again. Very annoying. Another thing everybody i am talking told me to speak more loudly because they can not hear me and that my voice is not clear.
Sent from my GT-I9000 using Tapatalk

I had the exact same problem with JVH (but not with any other firmware, including JVP). I tried to re-flash JVH (with re-partition), but it persisted.
I then went for an even older FW (an Eclair ROM), then re-flashed JHV (with bootloaders) and it worked just fine.
I still don't know what caused the problem, but that's how I solved it... Hope this helps!

vladoots said:
...I then went for an even older FW (an Eclair ROM), then re-flashed JHV (with bootloaders) and it worked just fine.
I still don't know what caused the problem, but that's how I solved it... Hope this helps!
Click to expand...
Click to collapse
i did the same thing yesterday night and now testing the jvp..

lokk here:
http://forum.xda-developers.com/showthread.php?p=14688449&highlight=Phone.apk#post14688449

Why you guys even did not read the first page instead of posting rubbish?
Shame on you!

I was on a call and it FC'd and network signal was lost as well.
I dont know if FC was due to lost signal or lost signal because it FC'd, either way its a major bug in JVP.

Sorry man but are you stupid?

I had that too but only 1 time, after i hang up phone suddenly lost network and after cuple of seconds it was back. No FC no errors. Maybe it is becouse of dirty sim card, i had samsung i5700 before and had to clean sim card, after cleaning it never happend again.

Screen randomly getting stuck and black.

Forgive the title, I just don't know how to describe what is happening all too well.
When I lock my phone and the screen goes black, usually it's fine and I can unlock it but at random times, it just stays like that. My phone still works because when someone sends me a message on Skype, the phone vibrates but the screen just stays black. Neither the home button or the lock button help and the only solution I have found is to reboot my phone at those times.
What should I do to unlock it when this happens or to prevent it from happening again?
Galaxy S GT-i9000 running CyanogenMod 9 with no other tweaks.

theKrev said:
Galaxy S GT-i9000 running CyanogenMod 9 with no other tweaks.
Click to expand...
Click to collapse
Oh CM9 i see Does this happen with other custom roms or stock-rom too?
If reboot solves the problem, it is high likely not hardware related i think. Maybe you should choose another custom rom and give it a try. Back to the times i flashed cm9 nightlies nearly everyday, i experienced a lot of those random bugs. Since i use cm10 nightlies all annoying bugs are gone and my phone runs like butter
If the problem persists, you should do a bugreport on the CM9 original thread:
http://forum.xda-developers.com/showthread.php?t=1592131&highlight=cyanogenmod+9
Cheers

Did you solve your problem? I have stock 2.3.6 GB and same problem

shadowbgd said:
Did you solve your problem? I have stock 2.3.6 GB and same problem
Click to expand...
Click to collapse
Hehe, old thread. I actually thought it would get lost in the ages
Anyway, I didn't exactly solve the problem but it sort of fixed its self when I started using the Nightly, my phone has never been this stable. (currently on Android 4.1.1 using CyanogenMod 10-20121003-NIGHTLY-galaxysmtd)

[Q] korean galaxy note capacitive button stopped working suddenly.

hi friends need help .
Last night i rooted my galaxy note with cwm.tar recovery and superuser.
everything was working fine until i downloaded rom manager and did something, i dont remember (perhaps flashed rom ) and my device restarted after that my capacitve back button and menu button stopped working and lights are showing on always even i tried to disable it from setting. I flashed to stock rom ics and jelly bean but still problem not solved please help me friends. i sure its not hardware issue any suggestion ?
galaxy note shve160s.

OK here's you're first problem, this is not the thread for your device. Second you may need to use Odin to flash your original stock ROM. Your stock firmware can be found at www.sammobile.com or samfirmware.com. If that doesn't work it maybe a hardware problem. Next time search XDA for your phone's model number. This thread is for SGH-T879. Good luck. P.S. don't use ROM manager to flash CWM If your exact phone isn't listed. You're lucky you didn't brick your phone.
Sent from my SAMSUNG-SGH-T879 using xda app-developers app

thank you it didnt solved my problem perhaps its hardware related problem.. unlucky me