Related
Hi guys, i have a Brand new Nook Color that im trying to root. I will try to explain what i've done so far:
1)updated firmware to 1.1
2) downloaded super-nooter 12.25
3) downloaded win32diskimager and winimage
---i have an 8gb fully formatted sd card-----
note* i could not for some reason "restore virtual hard disk image on virtual drive", so instead i used win32diskimager and transfered the files over to E: drive (micro sd) noticing the files on the step-by-step instructions; my files are similiar except the "u-boot.bin" file that it reads instead is a VLC file saying "u-boot" and it shows the orange cone.
i've since then installed the micro sd card into the nook, plugged in the usb, to start the boot up, i hear the nook connecting/disconnecting with the laptop, screen is black, then i eventually get to the "n" screen...... it just stays there....
What am i missing/doing wrong/not getting?
i REALLY appreciate anyones advice and help. thank you so much
Does supernooter root version 1.1?
1.1 just came out today.
Sent from my Android Nook Color Tablet via Tapatalk
i thought about that too. is there a way to get the nook back to usable condition? and if so, what should i do differently?
thanks kindly
ok so i've done the 8 interrupted boots and have successfully got the nook to default settings by following instructions "flash back to clean stock image". i am now on 1.0.1, and will retry the whole process again..... i'll keep you posted!
Yes. The current Auto-Nooter 2.12.25 only works on 1.01 and not 1.1.
It will hang your Nook if you try..
To restore it back to factory.. the the data wipe then trigger the factory restore by interrupting the boot process 8 times.
Power up the nook, then as soon as you see the text come out, press and hold the power button until it shuts down.. Do that 8 times..
You can find more instructions here :
http://nookdevs.com/Flash_back_to_clean_stock_ROM
Good luck! And wait for a new auto-nooter..
MaccaMRP said:
i thought about that too. is there a way to get the nook back to usable condition? and if so, what should i do differently?
thanks kindly
Click to expand...
Click to collapse
To go back to 1.01 1.02. ...currently its the post right under yours
not sure if it will work if you are already upgraded to todays update. But you can do the eight salute. too.
Just an FYI it takes a while for the devs to work up roots for new versions. When a new version comes out it can break existing roots and a new exploit or variant of and old exploit needs to be discovered. Basicaly the old root methods may not work for the new versions. Always give it a few days for the dev comunity to catch up and react. Never a good idea to upgrade your firmware the day it comes out and then try to root.
Its a learning processes most of have gone through. read read read. Its all here.
Good luck.
Thanks for everybody that helped! I now have successfully rooted my NC, and am enjoying it thoroughly!
Cheers
Sent from my LogicPD Zoom2 using Tapatalk
i rooted my NC with 1.1.0 and everything was perfect. installed and backup with CWR v 3.0.0.5. I have been stuck in the two screens of cwr. I CANNOT TURN off the nc so 8 aborted on/off s do not work. I cannot restore from sd card since it boots back into cwr, so i have not been able to use any removal code. the Monster pack is not for 1.1. I think I may be bricked. How do I get out of this clockwork recovery program (i have tried all of the options in it too, including fixing permissions, recoveries and endless useless reboots. HELP!
Hold the power button and it will turn off.
i have done that but it turns itself right back on again. it will not stay off. when it does go back on, it goes right back into clockworkmod recover (orange menu screen, landscape only)
Try going here and see if that gets you out of trouble .. Hope it helps
I can't say for a fact that this will make a difference for you, but it certainly can't hurt. Make sure you plug in your Nook Color to the charger, then do the manual power off (as in hold the power button). That should force it to reboot.
Those were the instructions I was given when CWR froze up on me during a kernel flash and it worked. Good luck.
got any mortar-bricked!
got it tuned off. now totally dead.. does not respond to power switch at all now. beware of CWR!!!
Boot CWR off monsterpack SDcard and restore stock system.img/boot.img. This saved me. This is definitely auto-nooter 3.0.0 related because pre-rooted BN 1.1.0 flashable does not have this problem.
ddd22 said:
got it tuned off. now totally dead.. does not respond to power switch at all now. beware of CWR!!!
Click to expand...
Click to collapse
no can do...cannot be turned on. stone dead
It is not. Trust me, I've has this thing twice today. boot partition on emmc is messed up I guess. You CAN boot from CWR on SD card.
ddd22 said:
no can do...cannot be turned on. stone dead
Click to expand...
Click to collapse
With all due respect, I dont understand how that can be. When I press, or press and hold the power key, nothing at all happens. no screen or light activity of any kind... like someone removed a battery.
After your reply, thinking perhaps my removed micro sd card might make a difference, i put it back in and tried again to power on the NC.. nothing happens still. Are you telling me that somehow if i change the content of my SD card to the Monster Pack that somehow that firmware code is going to turn on the Nook even though i cannot power cycle it at all without that magic? I dont understand how this could be and creating that card is a fairly steep search and discovery mission for me which i am willing to do if it has a chance of working.
btw, the battery is fully charged according to the green N on the usb cable.
Thank you so much for your response.
zdrifter said:
Try going here and see if that gets you out of trouble .. Hope it helps
Click to expand...
Click to collapse
What he/she said.. Happened to me once today. Remove the CWR and you should be good to go
how do i do that when no matter what i do the NC will not power on at all...zero. I can no longer even establish a usb connection to the computer.. it detects something and then tries and fails to install required drivers (which were previously installed and previously working). As much as I wish you all are right and I am missing something, I think I may be the first fool to brick the unbrickable!
You will need to make a bootable SD card and boot off that.
i made a bootable cwr sd from the monster rootpack. same nothing happens. will not power on in any way shape or form. will now remake the card with the full rootpack and pray that i can eat my words.
chomp chomp chomp
(the glorious sounds of words being eaten). you both were 100% correct and trust you i should have even more. I followed your advice despite my doubts and I wrote the rootpack image to the sd card and held the power button for about 15 seconds and alive she came! now i am at least back to my cwr that i cant get out of. i now could use a little more of your wisdom as to the best next steps. should i remove cwr then reflash with say 1.1.0R2 or should i figure out how to use cwr to do that flash, and remove it after the flash is completed. obviously a newbee to flashing this device (less than a week old), but have been following Energy on HTC flashes for long times. There is so much information here, it is almost too much when you first step in and your collective willingness to help this doubting thomas is extremely appreciated. my apologies and my deepest thanks. more reading coming up..
resolved!
i added the zip for 1.1.0 -r2 to the monster sd boot card and installed the rom from there. setting it up now. thanks to all for not listening to my doubt and telling me to continue as instructed. forever grateful
ddd-22 - did you install from CWR after rooting 1.1 using the modified Autonooter, or did you sideload the rooted 1.1?
I installed CWR from a 1.1 that was rooted using Autonooter (modified for 1.1) and ended up in a CWR reboot loop similar to what you had.
Yeah- I attempted to run the OC rom after autonootered to 1.1 and got into the loop. Has anyone had succes in loading the OC rom after autonootering to 1.1? Thanks
Thank you for this thread. The exact same thing happened to me after trying to flash a kernel using CWR and autonooter3.0. Thought I was bricked for sure!
I am back to business and glad not to have an expensive paper weight!
though i am on the way to recovery, not fully there yet. the r2 prerooted version was great except i could not log onto gmail... it kept seeing the NC as a phone and was looking for a cellular network, and gave me the message "a reliable connection with google servers could not be made" or some such verbage.. In the pre rooted 1.1. r2, i followed the directions going through youtube etc, but that did not work. so i decided to try to restore the backup i made when i first got caught in the doloop. which i did again, so it is back to monster to start over again and clear out the NC. I have been scouring other sites and many people have been having this problem. I wish i could remember how i installed cwr (method) but cant. however, what i found fairly consistently, and i believe i made the same mistake, was not restarting the NC before i made the backup. seems that is what got a lot of folks into this doloop crisis. if anyone has a plan of how i should get back to my previous state of bliss, let me know. I am remaking monster pack again and clearing out my machine.
Ok so I have totally messed my brand new device, this is second day I have had it. I got it yesterday and first thing I did was install DeeperBlues HC v4 on my eMMC. It was easy. I had to use Autonooter first. I was on 1.0.1. Well after playing with it all night. I started to not like the functioning of apps on the platform. They were great but was in my opinion, no greater than when it was just rooted. So I decided to bring it back to stock. I accidently placed wrong sd card in it, the one with Autonooter on it. Now when it boots up it says Loading.... then I get the word ANDROID in lower left had side of screen in landscape. I am a noob when it comes to this. Now I flash and mess with my phones rom and themes and kernels all the time kind of a junkie, but this is no walk in the park.
Please can someone help me.
MentalDragon said:
Ok so I have totally messed my brand new device, this is second day I have had it. I got it yesterday and first thing I did was install DeeperBlues HC v4 on my eMMC. It was easy. I had to use Autonooter first. I was on 1.0.1. Well after playing with it all night. I started to not like the functioning of apps on the platform. They were great but was in my opinion, no greater than when it was just rooted. So I decided to bring it back to stock. I accidently placed wrong sd card in it, the one with Autonooter on it. Now when it boots up it says Loading.... then I get the word ANDROID in lower left had side of screen in landscape. I am a noob when it comes to this. Now I flash and mess with my phones rom and themes and kernels all the time kind of a junkie, but this is no walk in the park.
Please can someone help me.
Click to expand...
Click to collapse
I think you rooted your Nook which could be a fine thing. If that's not what you want, getting it back to stock is very easy.
Here's a link: http://nookdevs.com/Flash_back_to_clean_stock_ROM
The tricky part is to get the timing right so that you get the 8 failed boots (that took me a while). If it looks like it's about to boot up up, hold down the power button till it goes off (at least I think that's what I did). If you have adb installed (or install it) you can get around that.
BarryR1 said:
I think you rooted your Nook which could be a fine thing. If that's not what you want, getting it back to stock is very easy.
Here's a link: http://nookdevs.com/Flash_back_to_clean_stock_ROM
The tricky part is to get the timing right so that you get the 8 failed boots (that took me a while). If it looks like it's about to boot up up, hold down the power button till it goes off (at least I think that's what I did). If you have adb installed (or install it) you can get around that.
Click to expand...
Click to collapse
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
khaytsus said:
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
Click to expand...
Click to collapse
Is this going to help me. My original firmware was 1.0.1.
Just grab the CWR 1.1 Recovery image from the development forum. Burn that onto an SD Card and reboot. Wipe data boot system cache and flash. done.
Find rootpack in dev section, write that to sd card, add the flashable restore to stock zip from samuelhalffs restore to stock thread in the dev section to your sdcard, boot to sdcard with the rootpack on it, flash the restore to stock zip after formatting system and data. Wala, fixed! All info can be found in my dummies guide to my nook won't boot a few threads down.
Thank you Thank you Thank you. This worked. I now have my Nook back. Thanks.
MentalDragon said:
Thank you Thank you Thank you. This worked. I now have my Nook back. Thanks.
Click to expand...
Click to collapse
Ok still need help. I seem to have installed CWR but now i am watching the Nook Color boot animation looping over and over. I tried to reboot but it is still looping. What do I do again? Do I reinstall sd card? And reflash the rom?
khaytsus said:
Yeah, but that's not going to work, he installed HC on the internal eMMC the first day he owned it.........
Probably the fix is here: http://forum.xda-developers.com/showthread.php?t=945838
Click to expand...
Click to collapse
Oops. My bad. Sorry for the misinformation.
MentalDragon said:
Ok still need help. I seem to have installed CWR but now i am watching the Nook Color boot animation looping over and over. I tried to reboot but it is still looping. What do I do again? Do I reinstall sd card? And reflash the rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=949699
Try this Thread, "Dummies Guide to Fixing 'My Nook Won't Boot'""
This should work and get you back to stock so you can start all over.
NookColor Version 1.2
About 2ish months ago I bought a nook color for my significant other, but I was having problems getting sideloaded books to work right on it so I decided to try and root it. I'm not extremely tech savvy, but can usually do something like this if I have directions.I rooted with manualnooter-4-6-16 The root went well and it was working fine for a couple days until dummy me started messing with it, don't know what it was that "bricked" it but I had updated the flash player then was in the rom manager and hit the backup button. The keyboard was acting funny so I rebooted it, it got to the screen that says Nook Color with the little android dude in the bottom right (nook color devs) and that screen just kept replaying itself except it would stop at the first O in Color and start over. I tried doing some research and followed a couple tutorials on how to return the nook to stock, none has been successful. The first one I followed was video tutorial on youtube to return it to stock 1.0.1, when it asked me to format the data I got and error format data failed..I just skipped that step and moved on. It booted and still showed me the nook color devs screen and once it completely booted showed a "How do you want to finish this action?" With only Home and Softkeys as a choice, I hit home and all it was was a black screen with a bunch of errors. so I tried a different tutorial, the next one I tried was to return it to 1.2 I followed the instructions, it again gave me a error cannot format data, I ignored it..it booted to the nook devs screen and just kept playing over again. I'm lost on what to do, I've searched and searched.
If it matters I've been using a 16gb micro sd because thats all I have, and was using the 2gb clockwork recovery image. I just want it returned to stock, and can't for the life of me figure out how.
Please someone explain to me in the most dumbed down way how to fix this darned thing.
Don't know how serious "brick" it was on your definition but let say on scale of 10, yr NC is bricked level 9 . Still, no need to panic
1. Get the uSD card (2GB is enough)
2. make it flashable with CwM Recovery (ClockworkMod Recovery) either v3.0.2.8 or v3.2.0.1
3. hunt for "re-partition/re-format" thread, read through. I'll update the link if I find it, can't remember where on top of my head now.
4. perform the repartition/reformat back to original v1.2 NOOK
5. hunt for "restore to NOOK for v1.2". Again, I'll update the link later
6. flash it
7. keep all your fingers crossed
Will try that, thank you..Hope it works..seriously cant afford to spend another 250 dollars to replace it
Edit: Fixed The 8 interrupted boots seemed to have fixed it, thanks for your help!
Scintie said:
Will try that, thank you..Hope it works..seriously cant afford to spend another 250 dollars to replace it
Edit: Fixed The 8 interrupted boots seemed to have fixed it, thanks for your help!
Click to expand...
Click to collapse
Glad to hear that!!!!
Hi everyone!
I am very new to rooting and this website. I have rooted my NC using a You Tube Video to go by. I have rooted doing the CM7 and also rooted using just the autonooter.
I like the autonooter version best because I have access to the market, plus the orginial B and N sites. Now, comes the 1.3 update. I love People magazine, and as of now, everyone is saying that is the only way I can get it. Has anyone come up with how to use the autonooter with the 1.3 update??
Thanks!!
No one has any answers?
Rhonda19 said:
No one has any answers?
Click to expand...
Click to collapse
Um...not to be rude, but have you bothered to look much? There's a whole (active) thread right here on the general board about this, not to mention the updated manual nooter thread in the development board.
For your information I have "bothered to look" .. I had some other questions, but I will look for my answers elsewhere!......Not to be rude
I was able to root my wife's Nook Color 1.3 using Manualnooter 4.6.16. Look for the Manualnooter instructions in the Nook Color Android Development section. Since the Nook Color had never been rooted, I just burned a CWM image to an SD card and installed Manualnooter 4.6.16 per the instructions. I ran the Fix Permissions from ROM Manager as suggested. I did have some issues with the New Market not showing all the apps that will run on the Nook Color but there are suggested fixes shown in other posts.
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Rhonda19 said:
I had some other questions, but I will look for my answers elsewhere!
Click to expand...
Click to collapse
If you had other questions, then ask them. The one you asked was answered without even needing to search.
hikersc said:
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Click to expand...
Click to collapse
The manual nooter instructions are pretty much as good as it gets. The market not fully working is more a function of the market than it is rooting the nook.
hikersc said:
I was able to root my wife's Nook Color 1.3 using Manualnooter 4.6.16. Look for the Manualnooter instructions in the Nook Color Android Development section. Since the Nook Color had never been rooted, I just burned a CWM image to an SD card and installed Manualnooter 4.6.16 per the instructions. I ran the Fix Permissions from ROM Manager as suggested. I did have some issues with the New Market not showing all the apps that will run on the Nook Color but there are suggested fixes shown in other posts.
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Click to expand...
Click to collapse
Thank you for your response! I appreciate it. Can your wife still download the People magazine??
Rhonda19 said:
Thank you for your response! I appreciate it. Can your wife still download the People magazine??
Click to expand...
Click to collapse
The "Shopping" feature is working on her rooted 1.3 so I People Magazine should download just fine.
By the way, the repair to the Android Market for me involved the process where you force close the Market and clear cache, then force close Google Framework Services and clear data, then reboot. There are other tablets besides the Nook for which this process works. As a side note, the LCD density change and Market rollback did not work for me as it has for some of the CM7 users.
Let me know how things work out as I have a rooted 1.1 (B&N Updates are blocked) that I would like to get back to a stock 1.3 and then root. On my rooted 1.1 the "Shopping" feature is broken.
I did it!!!!!!!!!!!!!!!!! I followed the instructions on here for the manual nooter for the 1.3 update. I followed them " TO THE LETTER" ! and after a few min...and some nail biting (LOL) everything rebooted just fine! Now, it did say that my install had failed before it rebooted and I was still connected to my laptop.
At that point, I decided to just cut my losses, wipe and return to stock. but then it rebooted again, and this time I had the market and I could open my People magazine!!
So far I haven't had to do any "fixing" on it!
Hikersc.... I do recommend it!!
Rhonda19 said:
I did it!!!!!!!!!!!!!!!!! I followed the instructions on here for the manual nooter for the 1.3 update. I followed them " TO THE LETTER" ! and after a few min...and some nail biting (LOL) everything rebooted just fine! Now, it did say that my install had failed before it rebooted and I was still connected to my laptop.
At that point, I decided to just cut my losses, wipe and return to stock. but then it rebooted again, and this time I had the market and I could open my People magazine!!
So far I haven't had to do any "fixing" on it!
Hikersc.... I do recommend it!!
Click to expand...
Click to collapse
I am still have Market issues with the new Market not showing apps such as Facebook for Androind and Angry Birds (the original). I have tried several fixes but nothing is working. Does your market show these apps?
hikersc said:
I am still have Market issues with the new Market not showing apps such as Facebook for Androind and Angry Birds (the original). I have tried several fixes but nothing is working. Does your market show these apps?
Click to expand...
Click to collapse
No, it doesn't show FB yet and I don't like Angry Birds so I've not installed that one. It is showing the other apps I have downloaded. If you would like I can try downloading Angry Birds just to see if it will show.
There is one problem I am having that I don't like. I don't have a back button, so I have to hit the U button at the bottom, the touch Zeam Launcher to go back to home screen and then start over. I may play around with it today, since it's raining!!
Rhonda19 said:
No, it doesn't show FB yet and I don't like Angry Birds so I've not installed that one. It is showing the other apps I have downloaded. If you would like I can try downloading Angry Birds just to see if it will show.
There is one problem I am having that I don't like. I don't have a back button, so I have to hit the U button at the bottom, the touch Zeam Launcher to go back to home screen and then start over. I may play around with it today, since it's raining!!
Click to expand...
Click to collapse
If FB is not showing in the Market then it is the same as mine (or my wife's). It is not a big deal as you can always sideload these type apps. Crazy Snowboard is one of my favorites and did not show on my 1.1 rooted so I had to sideload.
You need to use Soft Keys for your back button if no back button is showing (mostly B&N apps) at the bottom. Once you run soft keys, the little soft key icon will bring up a "soft key menu" that will home, menu, back, etc. Give it a shot and see if that works for you.
hikersc said:
If FB is not showing in the Market then it is the same as mine (or my wife's). It is not a big deal as you can always sideload these type apps. Crazy Snowboard is one of my favorites and did not show on my 1.1 rooted so I had to sideload.
You need to use Soft Keys for your back button if no back button is showing (mostly B&N apps) at the bottom. Once you run soft keys, the little soft key icon will bring up a "soft key menu" that will home, menu, back, etc. Give it a shot and see if that works for you.
Click to expand...
Click to collapse
You won't believe what happened! I had been reading this morning, and turned it off afterwards. When I turned it back on, it stuck at the "Nook Color" set up menu. That's the first time I have ever had a root to go bad. I've had them to "not take before" but for something to happen like that?? So I had to unroot, set it back up from the beginning, and now have side loaded the 1.3 update. If I try the root again, I will do it just as the directions are typed!! (LOL)
Everything was working fine, I just don't know what happened??
Wish I knew what to tell you folks...I just went back and shut down my nook and restarted it. It always sorta seems like it takes an uncomfortably long time at the color flashing animation, but it went through just fine. What I did initially was exactly what I documented in my other thread...
Rhonda19 said:
You won't believe what happened! I had been reading this morning, and turned it off afterwards. When I turned it back on, it stuck at the "Nook Color" set up menu. That's the first time I have ever had a root to go bad. I've had them to "not take before" but for something to happen like that?? So I had to unroot, set it back up from the beginning, and now have side loaded the 1.3 update. If I try the root again, I will do it just as the directions are typed!! (LOL)
Everything was working fine, I just don't know what happened??
Click to expand...
Click to collapse
Is CWM on emmc or the SD card? I avoid CWM on emmc and also don't use ROM manager.
fpga_guy said:
Is CWM on emmc or the SD card? I avoid CWM on emmc and also don't use ROM manager.
Click to expand...
Click to collapse
I'm not sure. (LOL) I made a bootable CWM on an SD card. Then loaded the manual nooter on it.
I rooted it over again.. Putting it back to stock version, then side loading the 1.3 update, and then running the 4-5-18. and I ran the Fix Permissions.
What may be going on is I didn't load the 4-6-16a either time, and that may be the entire problem. If something happens to it this time, I'll just leave it at the 1.3 and wait until something else comes up.
---------- Post added at 03:11 AM ---------- Previous post was at 02:57 AM ----------
It happened again! I cut it off, and then cut it back on later, and it stuck at the boot. Guess, I'll just have to unroot.....
Rhonda19 said:
I'm not sure. (LOL) I made a bootable CWM on an SD card. Then loaded the manual nooter on it.
I rooted it over again.. Putting it back to stock version, then side loading the 1.3 update, and then running the 4-5-18. and I ran the Fix Permissions.
What may be going on is I didn't load the 4-6-16a either time, and that may be the entire problem. If something happens to it this time, I'll just leave it at the 1.3 and wait until something else comes up.
---------- Post added at 03:11 AM ---------- Previous post was at 02:57 AM ----------
It happened again! I cut it off, and then cut it back on later, and it stuck at the boot. Guess, I'll just have to unroot.....
Click to expand...
Click to collapse
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
doncaruana said:
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
Click to expand...
Click to collapse
This is what I did except I used 4.6.16a (I also loaded a 1.3 kernal and ran the "Fix Permissions" from ROM Manager). All is well for me except the Market does not show FB and others. I was hoping a fix for the Market was forthcoming as the various fixes used with CM7 Market did nothing for me.
doncaruana said:
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
Click to expand...
Click to collapse
"Doncaruana" ... I finally got it rooted, I think!! (LOL) thanks for all your help!! I appreciate it!
Rhonda19 said:
"Doncaruana" ... I finally got it rooted, I think!! (LOL) thanks for all your help!! I appreciate it!
Click to expand...
Click to collapse
I know how frustrating this stuff can get, so I'm glad you got that behind you! I'll keep my fingers crossed it sticks!