Database Develop

LG 4X HD p880 in bootlooping, can't do anything [&already searched the foruns]

Hello.
I'm new to Android stuff and i started with Lg P880. I rooted it easily and now i've tried to install some CWM but i guess i did it wrong. After the initial LG logo the phone was doing the boot animation and then it got stuck on it. Then i flashed some .kdz into the phone and it got stuck on the initial LG logo without the animation.
I've already searched 1000 topics and tried 1001 things but nothing with success. What should i do? maybe the best option is to install the original firmware? and how if it is?
Thanks guys, hoping for some feedback.

You did unlock your bootloader didn't you? If so try to flash kdz with LG Flash Tool or something.
Sent from my 4X HD via XDA Premium

theduardo said:
Hello.
I'm new to Android stuff and i started with Lg P880. I rooted it easily and now i've tried to install some CWM but i guess i did it wrong. After the initial LG logo the phone was doing the boot animation and then it got stuck on it. Then i flashed some .kdz into the phone and it got stuck on the initial LG logo without the animation.
I've already searched 1000 topics and tried 1001 things but nothing with success. What should i do? maybe the best option is to install the original firmware? and how if it is?
Thanks guys, hoping for some feedback.
Click to expand...
Click to collapse
u can also use the all in one toolkit to help u install a recovery easy. if u havent unlocked the bootloader, then that tool will help u unlock it. u must have adb drivers installed to boot in adb and unlock bootloader. after unlocking is done u can install a custom rom. if u wanna go back to stock rom then dont bother to unlock the bootloader.

Omario-242 said:
You did unlock your bootloader didn't you? If so try to flash kdz with LG Flash Tool or something.
Sent from my 4X HD via XDA Premium
Click to expand...
Click to collapse
like i said i'm new to this and i don't know. if rooting makes the bootloader unlock automatically yes i did. in case not i guess i didnt. i've already tried flash some kdz but can't find the original LG ones

theduardo said:
like i said i'm new to this and i don't know. if rooting makes the bootloader unlock automatically yes i did. in case not i guess i didnt. i've already tried flash some kdz but can't find the original LG ones
Click to expand...
Click to collapse
ah c'mon u only have to search for optimus 4x kdz ..... the thread is here and the files are here according to that thread. And no u havent unlocked the bootloader then. Search good in forum for adb drivers or a guide to unlock bootloader. if u epic fail with drivers then just install the android sdk. try ur best :highfive:

kessaras said:
u can also use the all in one toolkit to help u install a recovery easy. if u havent unlocked the bootloader, then that tool will help u unlock it. u must have adb drivers installed to boot in adb and unlock bootloader. after unlocking is done u can install a custom rom. if u wanna go back to stock rom then dont bother to unlock the bootloader.
Click to expand...
Click to collapse
Hello, i've downloaded the all in one toolkit already but i dont know how to use it properly. is there any tutorial to do what you said step by step ? i haven't found one yet and i don't really know how to do what you said. i just want the phone to start, that is annoying me
EDIT:
ah c'mon u only have to search for optimus 4x kdz ..... the thread is here and the files are here according to that thread. And no u havent unlocked the bootloader then. Search good in forum for adb drivers or a guide to unlock bootloader. if u epic fail with drivers then just install the android sdk. try ur best
Click to expand...
Click to collapse
i went to that thread already but i can't download any kdz since it says "access denied" when i try to download any of the list

theduardo said:
Hello, i've downloaded the all in one toolkit already but i dont know how to use it properly. is there any tutorial to do what you said step by step ? i haven't found one yet and i don't really know how to do what you said. i just want the phone to start, that is annoying me
Click to expand...
Click to collapse
u cant find anything in 10 seconds when we say search we mean search good. nevermind... its only 5 minutes of my life.
i wont show u the adb drivers cause u have to force them in and people usually have problem with that procedure. just
1. download 32bit version android sdk , install it and update it. reboot ur pc to be sure the drivers are fine.
2. go at the folder u installed the android sdk. in there somewhere u will see a file named adb. in there create a cmd so u dont have to navigate there to use the adb commands.
3. open that cmd and do : adb start-server . check if u see ur device: adb devices. if u see it then u are good to go.
4. reboot in adb mode. use the all in one toolkit or do: adb reboot bootloader . if u get in adb mode then the toolkit will do its magic.
u dont need guide for the toolkit and there is none because above it sais what to do. it gives u options to select : 1 or 2 and then when u are in u just select the unlock bootloader. after its unlocked , select the option to flash cwm recovery or team win recovery whichever u like. thats all. then go download a custom rom , boot in recovery using volume down and power , navigate to find the adb bootloader and do ur magic using the command : adb install [rom path/name] from the pc. it will take only 10 seconds. generally its very easy. the only trouble in that crapy windows is the driver part but the android sdk will make it easy.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
theduardo said:
Hello, i've downloaded the all in one toolkit already but i dont know how to use it properly. is there any tutorial to do what you said step by step ? i haven't found one yet and i don't really know how to do what you said. i just want the phone to start, that is annoying me
EDIT:
i went to that thread already but i can't download any kdz since it says "access denied" when i try to download any of the list
Click to expand...
Click to collapse
and decide what u wanna do !!!!!!!! u wanna go to stock or u wanna flash some custom ?! u make me write useless things like that. just do the thing since u started it , dont quit it half way !!!!! unlock and go install some great rom there. pfff after u do it once then it will be childs play and u will start have fun modifiying the phone

kessaras said:
u cant find anything in 10 seconds when we say search we mean search good. nevermind... its only 5 minutes of my life.
i wont show u the adb drivers cause u have to force them in and people usually have problem with that procedure. just
1. download 32bit version ] , install it and update it. reboot ur pc to be sure the drivers are fine.
2. go at the folder u installed the android sdk. in there somewhere u will see a file named adb. in there create a cmd so u dont have to navigate there to use the adb commands.
3. open that cmd and do : adb start-server . check if u see ur device: adb devices. if u see it then u are good to go.
4. reboot in adb mode. use the all in one toolkit or do: adb reboot . if u get in adb mode then the toolkit will do its magic.
u dont need guide for the toolkit and there is none because above it sais what to do. it gives u options to select : 1 or 2 and then when u are in u just select the unlock bootloader. after its unlocked , select the option to flash cwm recovery or team win recovery whichever u like. thats all. then go download a custom rom , boot in recovery using volume down and power , navigate to find the adb bootloader and do ur magic using the command : adb install [rom path/name] from the pc. it will take only 10 seconds. generally its very easy. the only trouble in that crapy windows is the driver part but the android sdk will make it easy.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
and decide what u wanna do !!!!!!!! u wanna go to stock or u wanna flash some custom ?! u make me write useless things like that. just do the thing since u started it , dont quit it half way !!!!! unlock and go install some great rom there. pfff after u do it once then it will be childs play and u will start have fun modifiying the phone
Click to expand...
Click to collapse
I really appreciate that you are trying to help me! I installed CWM to install the CM 10.2 but after i installed the CWM i rebooted the phone and it didn't start anymore since this is my main problem. My goal now is to bring him back to life again! after this yes i want to install a custom ROM to try out. I'll try to follow the procedure you posted and i'll give some feedback after doing it.

theduardo said:
I really appreciate that you are trying to help me! I installed CWM to install the CM 10.2 but after i installed the CWM i rebooted the phone and it didn't start anymore since this is my main problem. My goal now is to bring him back to life again! after this yes i want to install a custom ROM to try out. I'll try to follow the procedure you posted and i'll give some feedback after doing it.
Click to expand...
Click to collapse
first of all put ur thoughts in order. u said u only rooted so u mustnt have unlocked the bootloader. if the bootloader is locked then cwm is not flashed. try reboot and hold volume down and power and see if u get in recovery. if not , then u must install a recovery. team win or cyanogen doesnt matter. (IF u have installed cwm that means the drivers on the pc are corrent and u can get in adb mode) Do that and tell me what happened so i know what u have done so far , because all those threads are confusing until now.

kessaras said:
first of all put ur thoughts in order. u said u only rooted so u mustnt have unlocked the bootloader. if the bootloader is locked then cwm is not flashed. try reboot and hold volume down and power and see if u get in recovery. if not , then u must install a recovery. team win or cyanogen doesnt matter. (IF u have installed cwm that means the drivers on the pc are corrent and u can get in adb mode) Do that and tell me what happened so i know what u have done so far , because all those threads are confusing until now.
Click to expand...
Click to collapse
the power and volume down leads to nothing. the only thing that i can get into is S/W upgrade without battery and pressing vol+ and power.
the screen goes like this when i power the phone and nothing works.
oi43.tinypic.com/674lko. jpg -> since i cant post images.
so what should i do now?

theduardo said:
the power and volume down leads to nothing. the only thing that i can get into is S/W upgrade without battery and pressing vol+ and power.
the screen goes like this when i power the phone and nothing works.
oi43.tinypic.com/674lko. jpg -> since i cant post images.
so what should i do now?
Click to expand...
Click to collapse
unlock bootloader. get android sdk x32, do what i said above at previous thread. then if u have other trouble, say it.

kessaras said:
unlock bootloader. get android sdk x32, do what i said above at previous thread. then if u have other trouble, say it.
Click to expand...
Click to collapse
how do i unlock bootloader? i tried to follow your steps but uncessefully

theduardo said:
how do i unlock bootloader? i tried to follow your steps but uncessefully
Click to expand...
Click to collapse
there is no video so i cant show u. those steps there is the easier way.
the all in one toolkit does everything u need since u got the adb drivers there.

kessaras said:
there is no video so i cant show u. those steps there is the easier way.
the all in one toolkit does everything u need since u got the adb drivers there.
Click to expand...
Click to collapse
i found some tutorial in the internet and my phone is running again. but i lost all my dcim files, not the other ones because i had the backup.
now to install a new rom what are the SAFE steps? can i install through ROM manager?

theduardo said:
i found some tutorial in the internet and my phone is running again. but i lost all my dcim files, not the other ones because i had the backup.
now to install a new rom what are the SAFE steps? can i install through ROM manager?
Click to expand...
Click to collapse
rom manager is just an app to provide easy steps. i have never used it. i prefer the manual way. to go into recovery , run the adb sideload and open a terminal at the pc and press adb install [ zip rom name , or whatever i wanna install ]

kessaras said:
rom manager is just an app to provide easy steps. i have never used it. i prefer the manual way. to go into recovery , run the adb sideload and open a terminal at the pc and press adb install [ zip rom name , or whatever i wanna install ]
Click to expand...
Click to collapse
ok thanks for all:good:

[Q] Help unbrick device

After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one

The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.

did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).

SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "

kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.

SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!

arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure

SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.

RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s

SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?

Power and vol-, not+

Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?

arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.

Need help! I think I bricked my device..

Hy guys.. I think i messed up.. My phone had unlocked bootloader an non-touch CWM. Then I tryed to install toucn CWM (http://forum.xda-developers.com/showthread.php?t=2298420) I was getting an error "adb is not recognized as an internal or external command operable program or batch file" so I changed path via this http://www.computerhope.com/issues/ch000549.htm. I executed demand and after it finished(or so I thought it finished) i shut the down and whent into recovery. But it didnt want to go into recovery, the half of the screen was in some stripes and it was flashing. I turned it of and on, went into ROM manager and reboot in recovery and the same thing happened again and now I cant turn my phone on! It just shows that weird flashing lines and it turns off.. Help guys!
EDIT! I just managed to turn on my phone! What should I do now? I dont want to go back in recovery through ROM manager because I dont think it will work.. In ROM manager it says that I have a new version available(that I am curently on 5.xxx and there is 6.0.3.1 available..

brunek said:
Hy guys.. I think i messed up.. My phone had unlocked bootloader an non-touch CWM. Then I tryed to install toucn CWM (http://forum.xda-developers.com/showthread.php?t=2298420) I was getting an error "adb is not recognized as an internal or external command operable program or batch file" so I changed path via this http://www.computerhope.com/issues/ch000549.htm. I executed demand and after it finished(or so I thought it finished) i shut the down and whent into recovery. But it didnt want to go into recovery, the half of the screen was in some stripes and it was flashing. I turned it of and on, went into ROM manager and reboot in recovery and the same thing happened again and now I cant turn my phone on! It just shows that weird flashing lines and it turns off.. Help guys!
EDIT! I just managed to turn on my phone! What should I do now? I dont want to go back in recovery through ROM manager because I dont think it will work.. In ROM manager it says that I have a new version available(that I am curently on 5.xxx and there is 6.0.3.1 available..
Click to expand...
Click to collapse
Why in God's name do people insist on trying to use ROM Manager? It is a pile of c**p that causes far more issues than need be. Just read the threads and do it manually so that you understand what you are doing, and why - or worst case use the All-In-One-Toolkit instead.

SimonTS said:
Why in God's name do people insist on trying to use ROM Manager? It is a pile of c**p that causes far more issues than need be. Just read the threads and do it manually so that you understand what you are doing, and why - or worst case use the All-In-One-Toolkit instead.
Click to expand...
Click to collapse
I unlocked my bootloader with All in one tool, and flashed CWM with it.. I installed ROM manager so that I can reboot into recovery easily..
Can you help me fix this problem?

install the recovery manually then try to reboot phone in recovery don't use Rom Manager...
Sent from LG 4X HD using Tapatalk 2

brunek said:
I unlocked my bootloader with All in one tool, and flashed CWM with it.. I installed ROM manager so that I can reboot into recovery easily..
Can you help me fix this problem?
Click to expand...
Click to collapse
I don't think that you have done what you think you have done If you had followed the first thread you listed then you would have installed CWM Touch v6.0.3.1 on your phone as that is the version you would have had to download.
If your phone boots up fine into normal operation then simply follow that guide again TO THE LETTER - and when you reboot into recovery, do NOT use ROM Manager to achieve it - use the proper method.

SimonTS said:
I don't think that you have done what you think you have done If you had followed the first thread you listed then you would have installed CWM Touch v6.0.3.1 on your phone as that is the version you would have had to download.
If your phone boots up fine into normal operation then simply follow that guide again TO THE LETTER - and when you reboot into recovery, do NOT use ROM Manager to achieve it - use the proper method.
Click to expand...
Click to collapse
I started and I got a message c:\adb is not recognized etc..I already changed the path in "envirometn variables" to c:..
When I open cmd it says like this C:\ADB> and then I type there c:\adb>adb shell.. Or should I just type adb shell??

brunek said:
I started and I got a message c:\adb is not recognized etc..I already changed the path in "envirometn variables" to c:..
When I open cmd it says like this C:\ADB> and then I type there c:\adb>adb shell.. Or should I just type adb shell??
Click to expand...
Click to collapse
Common sense is often needed when doing anything with your phone - and a bit of basic computer knowledge.
I've just re-read the thread you linked to as a check. The command "c:\adb>adb shell" is a mistype by the OP. It should be "c:\adb\adb shell" or, if you are already in the C:\ADB folder, simply "adb shell"

SimonTS said:
Common sense is often needed when doing anything with your phone - and a bit of basic computer knowledge.
I've just re-read the thread you linked to as a check. The command "c:\adb>adb shell" is a mistype by the OP. It should be "c:\adb\adb shell" or, if you are already in the C:\ADB folder, simply "adb shell"
Click to expand...
Click to collapse
Ok.. I did that! Now,when I wrote the last comand "sync" it opened a new row [email protected]:/# and the next step in OP is restart in recovery mode.. Should I just turn off the phone and get into recovery? Its the same like the last time..

brunek said:
Ok.. I did that! Now,when I wrote the last comand "sync" it opened a new row [email protected]:/# and the next step in OP is restart in recovery mode.. Should I just turn off the phone and get into recovery? Its the same like the last time..
Click to expand...
Click to collapse
That's the best way to get into recovery, yes.

SimonTS said:
That's the best way to get into recovery, yes.
Click to expand...
Click to collapse
It worked! Thanks man, I dont really know what did I do wrong the first time.. Sorry I bothered you! Thanks again!:good:
But when I open ROM manager(dont be mad I just wanted to see ) it said that I have 5.x.x.x. version and that the new one is available..

brunek said:
It worked! Thanks man, I dont really know what did I do wrong the first time.. Sorry I bothered you! Thanks again!:good:
But when I open ROM manager(dont be mad I just wanted to see ) it said that I have 5.x.x.x. version and that the new one is available..
Click to expand...
Click to collapse
I'm glad it worked. As for ROM Manager, I have no idea as I won't contaminate my device with it. If the Recovery says it's 6.0.3.1 then I'd trust it and uninstall the pointless application.

SimonTS said:
I'm glad it worked. As for ROM Manager, I have no idea as I won't contaminate my device with it. If the Recovery says it's 6.0.3.1 then I'd trust it and uninstall the pointless application.
Click to expand...
Click to collapse
You are right,recovery says its 6.0.3.1. so there must be a bug in application. I deleted ROM manager, it brought me only problems! Thanks again man!:good:

[Q] Verizon LG G2 Stuck in CWM Bootloop

Hey guys,
I accidentally selected the OTA that popped up on my phone while on a Stock ROM and now my Verizon LG G2 is stuck in a bootloop with CWM Recovery 6.0.4.4 I have tried to wipe everything and install a older CM ROM and Gummy ROM to see if that would get my phone to turn back on and it doesn't. I have researched many threads to see if there was a resolution for my issue, but everything that I tried did not work. I have a iMac and a Windows laptop and I have tried many things with Terminal and Command Prompt and nothing seems to work. I don't know if I am doing something wrong with ADB or if I am simply just missing other things, but I am trying to get my phone back un-rooted and back to stock to get my phone replaced under the warranty. PLEASE HELP!

Yokleezy said:
Hey guys,
I accidentally selected the OTA that popped up on my phone while on a Stock ROM and now my Verizon LG G2 is stuck in a bootloop with CWM Recovery 6.0.4.4 I have tried to wipe everything and install a older CM ROM and Gummy ROM to see if that would get my phone to turn back on and it doesn't. I have researched many threads to see if there was a resolution for my issue, but everything that I tried did not work. I have a iMac and a Windows laptop and I have tried many things with Terminal and Command Prompt and nothing seems to work. I don't know if I am doing something wrong with ADB or if I am simply just missing other things, but I am trying to get my phone back un-rooted and back to stock to get my phone replaced under the warranty. PLEASE HELP!
Click to expand...
Click to collapse
Try the LG tools for bricked G2. Its somewhere on these forums. All you have to do is plug up to a computer and flash the stock ROM with the tool.
Sent from my magic box.

GlitchedSoul said:
Try the LG tools for bricked G2. Its somewhere on these forums. All you have to do is plug up to a computer and flash the stock ROM with the tool.
Sent from my magic box.
Click to expand...
Click to collapse
I tried the LG Flash Tool on a PC, but it gives me an error message LG USB/Parallel Lock Key is not detected and when I hit OK, it pops up with a Login with the Country filled in with Republic of Korea, ID and Password are left empty. I don't know what to do from there.

Enter into download mode by turning off your phone, then hold vol + and plug it to your computer.
Download the official firmware for your device.
Download FlashTool.1.0.54
unzip FlashTool.1.0.54, open the folder and launch UpTestEX.exe
Select type:3GQCT
Phone mode: DIAG
Select kdz file: browse for your official firmware
Then click: normal web upgrade test
Then click: Upgrade start
a new window will show, chose english language. Country: korea, then click ok and wait untill the firmware installs.
Good luck.

Partager.info said:
Enter into download mode by turning off your phone, then hold vol + and plug it to your computer.
Download the official firmware for your device.
Download FlashTool.1.0.54
unzip FlashTool.1.0.54, open the folder and launch UpTestEX.exe
Select type:3GQCT
Phone mode: DIAG
Select kdz file: browse for your official firmware
Then click: normal web upgrade test
Then click: Upgrade start
a new window will show, chose english language. Country: korea, then click ok and wait untill the firmware installs.
Good luck.
Click to expand...
Click to collapse
I am unable to boot into download mode, unfortunately. That's where I get stuck every time.

Yokleezy said:
Hey guys,
I accidentally selected the OTA that popped up on my phone while on a Stock ROM and now my Verizon LG G2 is stuck in a bootloop with CWM Recovery 6.0.4.4 I have tried to wipe everything and install a older CM ROM and Gummy ROM to see if that would get my phone to turn back on and it doesn't. I have researched many threads to see if there was a resolution for my issue, but everything that I tried did not work. I have a iMac and a Windows laptop and I have tried many things with Terminal and Command Prompt and nothing seems to work. I don't know if I am doing something wrong with ADB or if I am simply just missing other things, but I am trying to get my phone back un-rooted and back to stock to get my phone replaced under the warranty. PLEASE HELP!
Click to expand...
Click to collapse
flash twrp and try this http://forum.xda-developers.com/showthread.php?t=2451696

datechnerd said:
flash twrp and try this http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
How can I flash TWRP when my phone won't boot? According to a post I read and a YouTube video tutorial I watched, they keep referring to turning on USB Debugging which I can not do.

Yokleezy said:
How can I flash TWRP when my phone won't boot? According to a post I read and a YouTube video tutorial I watched, they keep referring to turning on USB Debugging which I can not do.
Click to expand...
Click to collapse
ADB sideload

HELP!!! Please! BRICKED!!!

Hey so I have the L90 D415 and I flashed the partition tool to get more data but i didn't realize that it was broken for my device and now im having issues.... This is how it went. I used the tool and it got to 70% and rebooted back into twrp so i knew that wasnt right so i flashed the next one that was supposed to be fixed and it did flash completely but for some reason it erased twrp, installed cwm and now i cant get into either. I had flashed stock using cwm before i chose to reboot but im still not able to boot up(stuck on LG logo). So to recap I can't get into recovery at all. I have fastboot. flashtool wont work(wont read phone in usb mode cuz im not booted) and im stuck on the LG boot screen. Please help me.

JamesB3 said:
Hey so I have the L90 D415 and I flashed the partition tool to get more data but i didn't realize that it was broken for my device and now im having issues.... This is how it went. I used the tool and it got to 70% and rebooted back into twrp so i knew that wasnt right so i flashed the next one that was supposed to be fixed and it did flash completely but for some reason it erased twrp, installed cwm and now i cant get into either. I had flashed stock using cwm before i chose to reboot but im still not able to boot up(stuck on LG logo). So to recap I can't get into recovery at all. I have fastboot. flashtool wont work(wont read phone in usb mode cuz im not booted) and im stuck on the LG boot screen. Please help me.
Click to expand...
Click to collapse
Well duh you didnt wipe the data of the rom before you flashed so of couse you are gonna be boot. Flash with the kdz offline flash then when you are done flashing pull out battery and use special button combo to factory reset it so that you can boot in to phone but you will lose all data excluding the ones on your EXTERNAL sd card.

krchi said:
Well duh you didnt wipe the data of the rom before you flashed so of couse you are gonna be boot. Flash with the kdz offline flash then when you are done flashing pull out battery and use special button combo to factory reset it so that you can boot in to phone but you will lose all data excluding the ones on your EXTERNAL sd card.
Click to expand...
Click to collapse
I did though. I wiped system, data, cache, dalvik and internal.
What do you mean by offline flash?(sorry first LG. I had a Huawei before this)

JamesB3 said:
I did though. I wiped system, data, cache, dalvik and internal.
What do you mean by offline flash?(sorry first LG. I had a Huawei before this)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2625044 follow the same steps but use our kdz for lg l90

4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
I ran into a problem. I cannot find the directory mentioned in #4.

JamesB3 said:
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
I ran into a problem. I cannot find the directory mentioned in #4.
Click to expand...
Click to collapse
You need to make sure that you have hidden files on

yeah i figured it out with google.
I have tried both methods on the guide and have came up short both times. I keep receiving this error(In screenshot).

I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.

JamesB3 said:
I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.
Click to expand...
Click to collapse
Go on the lg website and find lg l90 d415 drivers and install them if you got that far its most likely just driver issues.

JamesB3 said:
I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.
Click to expand...
Click to collapse
Also check if you have your computer enabled for all drivers..
Some drivers do not boot because the certificate is not correctly assigned.
If you have a PC running Windows, on boot press F8 and select disable driver certification verify.
Try again after this.

razoract said:
Also check if you have your computer enabled for all drivers..
Some drivers do not boot because the certificate is not correctly assigned.
If you have a PC running Windows, on boot press F8 and select disable driver certification verify.
Try again after this.
Click to expand...
Click to collapse
I got my phone fixed!!! I flashed twrp through fastboot then used the partition tool for our device to get my partitions back and i flashed lollipop! Thanks for all your help you guys!!! I am trying to help my friend fix his LG Volt. Can someone post the laf.img onhere for me please? thats all I need to get his phone working.