Database Develop

[Q] Sprint P100 can not wipe

Hi All:
My Sprint Tab P100 got some strange problems.
It's a second hand P100, Once i turn on the tab, it will warning with 3 Beebee, and nook & Amaza Mp3 & Market will report error.
Below warning will show up:
Amazon MP3_nook
“The application XXX has stopped unexpectedly, pls try again”
Market
"Attention:
An Error has occured, Please try again later."
After check, i found the original usr information still there.
(Gmail/Facebook account will try to sync with previous owner's ID. and i can not remove the account.)
What i have tried:
1) I have tried to WIPE using system recovery, after WIPE both data & Cache partition, issue still exist.
2) Perform the Samsung factory reset by enter *2767*3855# in the Memo, problem still there.
3)Format the SD card with Phone & Windows, still got problem
4) Flashed with the stock EA24 Rom from XDA(with Modem,using Odin), the problem still remain the same.
5)Flashed with DJ30, the problem still exist(Base/Fireware EA24).
6)Tried to install CWM, failed to boot up(Rooted before install CWM, after flash the Zimage to Kernal or recovery, some strings flush in the screen, then the tab hung at Samsung logo and reboot.)
I guess those problem was caused by some program information still remain in the internal storage, even after factory reset or flash with other ROM.
Can somebody help on this? Also prefer someone can help on how to install CWM
I am interesting that the OVERcome 2.01 Rom got a version to WIPE the internal storage, but the OVERcome rom are designed for GSMer. Can i tried to use it to clear my internal storage?

just installed Astro, the program will crashed when launch it

Can some one help on this topic?
I am suspecting my internal storage was locked to Non-Writable.
This might result CWM can not access the internal memory caused the failure of the installation.
Is it related to the Flash lock option in the Odin?

Check this thread..
http://forum.xda-developers.com/showthread.php?t=1133053
That has the stock files, and instructions to get root and CWM installed with the stock software. Using Odin to put the stock firmware (EA24) should wipe anything and everything off the tab and restore it to as if it were new out of the box. You also might want to wipe your sd card as it can cause issues with the CWM ext4 conversion.

Hi pvtjoker42 & All:
During the process of Kernel with CWM Recovery, i has been stopped @ step7
1) Download the zip file here
2) Unzip the file. You will need the file named zimage only.
3) Open Heimdall Frontend
4) Select Browse under Kernel and navigate to the file you downloaded in step 1 and select it
5) Press Start
6) The Tab will reboot, but will freeze on the Samsung logo. Turn it off and boot into recovery (Vol Up + Power)
~~~~~~~~~~~~~~~~~~~~
my tab failed here, no matter what you pressed, it doesn't go to CWM. Do u have any idea?
~~~~~~~~~~~~~~~~~~~~
7) CWM Recovery will attempt to back your tab up, but will fail. Don't fret.
8) Do a factory reset in CWM Recovery and reboot
9) You'll freeze on the Samsung logo again Turn it off and boot into recovery.
10) CWM Recovery will back your Tab up successfully.
11) You now have a CWM backup. Reboot.
12) Your auto rotate is broken.
13) Download the rotation file
14) Put it in /system/lib/hw and change the permissions to match the other items.

Can someone helps?
Today i tried 1 more things, Use a update.zip to update the tab from EA24 to EB28,before try this, i have tried OTA to EB28, it never success.
i download the update.zip from <forum.sdx-developers.com/index.php?PHPSESSID=99sdnmh5pm4rtuv39hk80f7du6&topic=13104.0;nowap> it seems to be official one, and the recovery is the stock version, but it failed again.
I start to believe that my internal storage has been locked, and data can not write in.
Is it possible to due to Fstab issue?
Pls helps to save my tab....

There is only one thing to do : return to stock. Carefully follow the guide. Don't do anything else to your tab, until you go through the restock steps :
http://forum.xda-developers.com/showthread.php?t=1133053
[SPRINT] Sprint Tablet Owners Thread (Root, ROM, Flash to stock, CWM Recovery)
The process reformats/repartitions your internal sd card, and sets the correct permissions. If this process fails, there is probably something wrong with the tab.

you might also try to select the option to repartition in Odin when going back to EA24. Then try the steps to get EB28 OTA update, and once you've got that up and running, you can try the update.zip to get to EF17 (gingerbread, as long as you don't need root)

I wouldn't. Try a different sd card
Sent from my Nexus S 4G using Tapatalk

Hi All:
Thanks for the advice.
I have tried to back to stock EA24 using odin, but the situation still ramain the same.
And it fail to OTA to EB28, the EB28 upgrade program will reboot the machine, and enter recovery model. but it will complete the program. also i have tried to put EB28 update.zip in the SD card, but also fail to upgrade to EB28.
I have repartition the phone by P100 serveral time using odin, also tried update Pit file. All failed.
I have format the SD card in Windows & then in Android, useless.
Now i have some clues:
In P1000 rom Roto-JME, there is Movinand.bin, this one got same name as the internal storage IC from samsung. i am thinking that file could be a file similar to partition table.
Can someone help to dump a "movinand.bin" for me from P100?
steps:
1)Get back to stock EA 24
2)Wipe Cache & factory data
3) Root it (Using superone click , you can find it here http://forum.xda-developers.com/showthread.php?t=803682)
4)Install terminal (i use better terminal) or using a ADB to connect to shell.
5)Type "su", check whether "$" change to "#" in the shell
6) Type “dd if=/dev/block/mmcblk0p2 of=/sdcard/movinand.bin bs=4096”
7) Find the Movinand.bin in the SD card
You can sent it to me by drop a email to [email protected]
If there is anything wrong, pls help to correct me
Thanks in advance

as some people is asking how did i fix the issue, just publish the information here.
I fixed the issue by replaced the internal storage (the chip), cost about US$ 30(RMB 200)
If anyone have better solution, just post here to share

URGENT Problem

Hy!
I have just soft-bricked my mobile (i9000) with the new JB.Miui rom, i fixed it.
After 1 day of trying i have Ice Cream Sandwich now, but i guess it has wrong partition layout, cause when i want to format Dalvik Cache it says: E: is invald, so i can't even flash ANY of JB roms from ICS or from GB (Before i could...)
How to fix it?
Please help me
Minti

i have the same error when i wipe the dalvik cache but i've never met errors to flash JB rom.
If somebody knows to what corresponds this error it would be cool.

imvenom said:
i have the same error when i wipe the dalvik cache but i've never met errors to flash JB rom.
If somebody knows to what corresponds this error it would be cool.
Click to expand...
Click to collapse
Did you fix it?

I don't know what this error corresponds to but this does not affect the flashing process at all.. This error has started coming from ICS roms onwards. When you click on clear dalvik cache you'll get this error, after that confirm to clear the dalvik cache and it'll clear it.
So don't worry about that.

I can't flash Jelly from GB now
It says: error in archieve (bad) and it can't open it
And when i want to wipe cache or do factory reset (not sure) then i get this: /sd-ext invald directory
Sent from my GT-I9000 using xda premium

MintiIceCream said:
I can't flash Jelly from GB now
It says: error in archieve (bad) and it can't open it
And when i want to wipe cache or do factory reset (not sure) then i get this: /sd-ext invald directory
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Error in archive means that the file you downloaded is not good.. you'll have to redownload the file.. I would suggest flashing CM based rom first i.e. either CM9 or CM10 then moving on to other ICS or JB roms...
About the other error, don't worry about it.. that won't affect any flashing though why it comes I don't know.. I think I got the same error too many times earlier but it doesn't affect the procedure.

I tried tp flash cm10, no sucess (writes the same)
Sent from my GT-I9000 using xda premium

Edit: I'm wrong
Sent from my GT-I9000

amerkiller1995 said:
Edit: I'm wrong
Sent from my GT-I9000
Click to expand...
Click to collapse
Its because it uses a different file system , I had this error the other day you need to download i9000 recovery pack flash stock gingerbread and pit making sure you tick repartition ! http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 is the link download i9000 Upgrade or Downgrade to GingerBread 2.3.6 ROM JVU + Root with a 512 Pit File (repartition Ticked) Ideal base for upgrading to ICS and J.Bean and you will be back to stock and problem fixed, make sure kies is not running when you flash by using ctrl alt and delete and killing kies before you flash or your phone wont be found hope I have helped you like someone did for me the other day.....peace ....good luck... AND DONT RUSH IT TAKE YOU TIME AND READ THE INSTRUCTIONS! I cannot stress that enough :good:

swukjay said:
Its because it uses a different file system , I had this error the other day you need to download i9000 recovery pack flash stock gingerbread and pit making sure you tick repartition ! http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 is the link download i9000 Upgrade or Downgrade to GingerBread 2.3.6 ROM JVU + Root with a 512 Pit File (repartition Ticked) Ideal base for upgrading to ICS and J.Bean and you will be back to stock and problem fixed, make sure kies is not running when you flash by using ctrl alt and delete and killing kies before you flash or your phone wont be found hope I have helped you like someone did for me the other day.....peace ....good luck... AND DONT RUSH IT TAKE YOU TIME AND READ THE INSTRUCTIONS! I cannot stress that enough :good:
Click to expand...
Click to collapse
Thanks, i have a new error, flashed UK Stock rom, my error is : E: format_volume: rfs format failed on /dev/block/stl10 (when trying to data/factory reset (in stock recovery))

MintiIceCream said:
Thanks, i have a new error, flashed UK Stock rom, my error is : E: format_volume: rfs format failed on /dev/block/stl10 (when trying to data/factory reset (in stock recovery))
Click to expand...
Click to collapse
could E be your external memory card? try again without your memory card installed
---------- Post added at 08:05 PM ---------- Previous post was at 08:02 PM ----------
swukjay said:
could E be your external memory card? try again without your memory card installed
Click to expand...
Click to collapse
Im saying as I think E: is the external sdcard, I would try to partition the card using clockwork first In case your ext partition got formatted to a different format, rfs is a file system so it sound like that could be your problem ,try a restore first with the card removed if no errors you know its the card ! by restore i mean factory reset ok, don't panic we will solve this this !
---------- Post added at 08:19 PM ---------- Previous post was at 08:05 PM ----------
swukjay said:
could E be your external memory card? try again without your memory card installed
---------- Post added at 08:05 PM ---------- Previous post was at 08:02 PM ----------
Im saying as I think E: is the external sdcard, I would try to partition the card using clockwork first In case your ext partition got formatted to a different format, rfs is a file system so it sound like that could be your problem ,try a restore first with the card removed if no errors you know its the card ! by restore i mean factory reset ok, don't panic we will solve this this !
Click to expand...
Click to collapse
I dont think you flashed it correctly in odin, you must flash both files,
Instructions. These are divided into two parts:
PART 1 (Flashing the base ROM):
1. Again, a reminder. Backup all your stuff before starting.
2. Wipe/Factory Reset phone. This is required. Turn off phone and then boot into
Recovery (Vol UP+Home Key+the Power Button.). Select the 'wipe data/factory reset'
option (using Power button if on custom ROM/custom kernel, or the Home key if on
stock I9000 firmware). Then select Yes to do it.
3. Now, turn off your phone by removing the battery and enter the Download mode by
pressing the Vol DOWN+Home Key+the Power Button together. (Will bring up a screen saying 'Downloading'.)
4. Now, run ODIN and connect phone to the computer. ODIN will say 'Added'.
5. Tick the 'Repartition' option, and then select the following files in ODIN (from the
folder you extracted the base package in):
● PDA: darky_odin.tar.md5
● PIT: s1_odin_20100512.pit
6.6. Press the Start button and wait for it to finish. Once it finishes,
Disconnect the phone from the computer after phone reboots.
7. After ODIN completes procedure and the phone reboots, a screen will come on the
phone with 'Android system recovery <2e>' written at the top, and the following text will
be written at the bottom:
"E:Invalid command argument
--Install from package--
Finding update package...
Opening update package...
Installing update...
#MANUAL MODE#
-- Appling Muti CSC...
Installing Muti CSC"
Don't panic. Just press the 'reboot system now' using the Home key and the phone will
restart and boot. Congratulations, you have the base Darky's ROM installed now. Now
for the next step.
8. Now, we will install Darky's ROM again, through Recovery, to add the things missing
in the base version.
PART 2 (Flashing the CWM zip package from Recovery to get the stuff missing in
the Base ROM)
1. Open the Market, and search for 'darky' and download the DarkyROM Configurator
app and install it.
2. After it is installed, open Darky ROM from the App Menu. Select all the options that
you want to install, and deselect the ones you don't want. DO NOT select Wipe as we
have already done that before using ODIN.
3. After selecting and deselecting the options according to your needs, press back to
save and exit Darky ROM app.
4. Copy the file resurrection.zip (extracted from the ROM’s ZIP file you
downloaded at the start) to your internal sd card.
5. Now shut down the phone, and boot into Recovery again. [Vol UP+Home+Power
key]
6. Now select "Install zip from SDCARD"
> [use volume keys/rocker to move up and down, and the POWER Button to select].
7. Select "Choose zip from SDCARD" and then select the ROM zip file
(resurrection.zip). Then choose "Yes."
8. After the process completes, press 'Go Back' and then 'Reboot system'.
9. Once the phone boots, you will have everything that you selected in the DarkyROM
Configurator.
10. That’s it. The procedure is complete. Enjoy the ROM.
Credits to addicted2088 for the instructions
---------- Post added at 08:33 PM ---------- Previous post was at 08:19 PM ----------
And if that fails try this,
http://droidangel.blogspot.co.uk/2011/06/guide-how-to-flash-updateupgrade_10.html this has a alternative way of doing it which may help your situation still had all the links saved when I was searching to solve this problem myself, I hope this helps mate, I know how bad it is and how much stress it causes, just keep chilled and don't panic, the good thing is.... IT STILL TURNS ON and that's the most important thing. , if this doesn't work its time to send this issue up to a higher mobile guru im pretty sure its fixable

swukjay said:
Did you fix it?
Click to expand...
Click to collapse
When I had this error for the first time I redid a wipe cache / system and a format / system reflash the Rom and the error changed and do not any more refrain from making the wipe dalvik hope that can help you.
sorry for my bad english.

Help me! XXJVU is not flashable, odin says: invald archieve :S

MintiIceCream said:
Help me! XXJVU is not flashable, odin says: invald archieve :S
Click to expand...
Click to collapse
Oh it was tar.md5, then i renamed it to .tar then its fine

I done everything as in the instruction but the error still remains:
E:Can't open /sdcard/pa_galaxysmtd-2.16-29SEPT.2012-124913.zip
(bad)
Installation Aborted.

I FOUND THE PROBLEM!:
its sd card can be found in
external_sd
but recovery wants to find it in
sd-ext
how to fix it?

Oh i see now...
it can't open a JB update zip file from internal memory

[ROM] STOCK - FULL ICS IMM76D.LP10 for Verizon i815 LTE Tab (only!) *UPDATE 10/16*

UPDATE: My hosting I had for XDA related work expired, so I re-uploaded everything here: http://www.mods4cars.com/pub/xda
Hi everyone. As pretty much everyone of us who got suckered into buying this excellent (hardware) tab from Verizon knows, their update strategy has been very slow and on top of that, glitchy. Finally, 4 months after the other editions of this tab, we're getting ICS... BUT the update is an incremental OTA update that fails on 99% of the tabs, because it expects a version FD01b instead of the FD01 most of us have. The update seems to have gone through for only 2 or 3 lucky users who must somehow have had FD01b on their tab when they got it.
So after one of the best collaboration efforts on the "Tab 7.7 General" forums, I am happy to present to you
The CWM flashable "full stock" ROM for the SCH-i815 - ICS IMM76D.LP10
First up, let me stress again that this is a HACK and that this is RISKY and that if something goes wrong you MAY end up with a BRICK that will require complicated revival ceremonies! Unfortunately I *have* to say here, that whatever you do here, you do AT YOUR OWN risk, I can not be held liable for anything!
Prerequisites:
Verizon SCH-i815 LTE Tablet (ONLY this version!) with Honeycomb (everyone should have FD01 at this point)
Windows PC with Samsung USB drivers installed, meaning when you connect the tab, you should be able to copy files to it.
A micro-SD Card 2GB or bigger, preferable BLANK, FAT32 formatted.
Step 1: Prepare the SD card
Connect the SD card to your PC and copy the ROM files to it.
ROM Choices:
Original Cloned ROM (First version with direct partition image copy, requires >1GB space on SD card which has caused issues for some)
http://electron73.org/XDA/i815/electron_ICS-LP10_i815.zip
Update 10/12:
NEW ROM with full ext4 optimizations. System, Cache and Data (only in wipe version) will be cleared, formatted and "fsck -Dfy" checked!
DO NOT WIPE ANYTHING IN CWM!!! Just choose the ROM file appropriately.
Non-Wipe Version (This one leaves existing data partition alone, only checks it for errors)
http://electron73.org/XDA/i815/electron_ICS-LP10_i815_nowipe.zip
Wipe Version (THIS ONE WILL FORMAT DATA PARTITION, ALL USER DATA WILL BE LOST!)
http://electron73.org/XDA/i815/electron_ICS-LP10_i815_wipe.zip
Step 2: Download the Odin CWM Recovery pack and get ready to flash
Odin Pack: http://electron73.org/XDA/i815/electron_i815_odin_pack.zip
This ZIP contains everything you need now and later during this process. Extract it in any folder you like (Desktop/Odin or C:\Odin).
Run Odin3 v1.85.exe
Step 3: Bring the tab into Odin mode
Hold down the power and volume down buttons on your tab continuously until you see the big warning. Press volume UP to enter flash (odin) mode. Connect USB. In Odin the leftmost ID:COM field should now be yellow. Click the PDA button and select the cwm-6.0.1.1-i815.tar file. Leave everything else as-is. Click start to flash and when it says rebooting immediately grab the tab and hold down power and volume UP until you see the blue CWM screen! If you don't do this and let the tab boot, then it will automatically kill CWM (yes, bastards!), so don't let it boot the regular ROM!
Step 4: Flash the ICS ROM
Insert the card into the tablet, then in CWM go to install zip from sdcard, then choose zip from external sdcard. Select the electron_ICS-LP10_i815_v2.zip.
It will flash the kernel, the radio (LTE modem), the factory fs (/system) and preload partitions. The whole flash will take about 5 min. Especially on the last two steps be patient, it takes a while to extract 800mb and then flash the full filesystem image. Turning off power here (or running out of battery juice!) will make the rom unbootable and will require a full re-do. IMPORTANT: This requires the use of an external SD card! Using internal storage will not work!
WARNING: DO NOT wipe or factory reset in CWM! You can simply install ICS over an existing Honeycomb setup! Choose the correct ROM version: One erases everything and the other one preserves user data. Since this was originally an OTA, it knows how to convert your saved data. So all your emails, save games etc. will still be there! We had too many reports of problems when wiping/factory resetting with CWM. So for now the best advice for anyone looking into installing the ROM is DO NOT WIPE!
UPDATED PROCEDURE as of 10/16 - NO NEED to flash the old 3e recovery any more! Much easier and quicker baseband update below...
Step 5: Download and flash the baseband modem.bin with ODIN
Download the baseband update: http://electron73.org/XDA/i815/electron_ICS-LP10_i815_modem.zip
Bring the tab back into ODIN mode the same as before. Extract the modem.bin file from the modem.zip and drop it in the PHONE section (not PDA!) in ODIN this time. Click start and let it flash and reboot. Done. Under settings/about device you should now have Baseband Version i815.04 V.LP10 / I815LP10
B]Step 6: Optional: Keep CWM or go all stock[/B]
If you would rather like to be full stock than keeping CWM as the recovery program, then bring the tab back into ODIN mode one last time (pwr + vol down) and Connect USB, then flash LP10_recovery.
The ROM is pre-rooted. SuperSU is pre-installed as part of the ROM.
Trouble?
If the tab for some reason gets stuck in a boot loop with the Verizon animation playing over and over, don't fret! Give it AT LEAST 10 full minutes to start with and if it still doesn't show the home screen after that, hold down power and vol up until you're in CWM and wipe data/factory reset (yes, that will completely kill all user data and the tab will be "like new").
Trickier: If you see any warnings in CWM or 3e stock recovery, that there was an error mounting /data, then you lost the data partition and need to do extensive hacking before the tab will ever boot again. We fixed exactly this problem beginning on the very bottom of the page here http://forum.xda-developers.com/showthread.php?t=1927392&page=16 so don't panic! This repair surgery thanks to the excellent guide by Androguide.fr here: http://forum.xda-developers.com/showthread.php?t=1862294
Thanks
Thanks to everyone involved in making this happen! Especially asenduk for dumping the image backups from his tab, rayjr13 for bringing this whole thing to my attention and sending me the first OTA bin file.
Every use of the thanks button is greatly appreciated

Hi, thank you so much for these instructions and all the help. I was wondering does that 6.0.1.1 protect you from the brick bug and I saw that you hosted the V2 file in the original thread but here you have the regular file hosted. Is the V2 better?

johnny13oi said:
Hi, thank you so much for these instructions and all the help. I was wondering does that 6.0.1.1 protect you from the brick bug and I saw that you hosted the V2 file in the original thread but here you have the regular file hosted. Is the V2 better?
Click to expand...
Click to collapse
What is this brick bug people speak of? Bricking during a flash or bricking when you're sleeping at night and doing nothing to the tab?
Thanks again for this Rom electronic73! Hopefully some devs will take this as a base and run with it!
Sent from my SCH-I815 using xda premium

johnny13oi said:
Hi, thank you so much for these instructions and all the help. I was wondering does that 6.0.1.1 protect you from the brick bug and I saw that you hosted the V2 file in the original thread but here you have the regular file hosted. Is the V2 better?
Click to expand...
Click to collapse
Yes the 6.0.1.1 (as far as I know!) is safe. No need to wipe anyway. The v2 included more files that turned out to be not necessary. The files posted here along with the updated, safer method of flashing, should be the best and quickest way to get to full stock ICS.
The v2 was mainly an attempt to bring user ice's tab back to life after his data partition got killed.

Newbie question of the day - where is the IMEI stored on the 7.7? If it's in /system, won't this result in *everyone* flashing this image ending up with the same IMEI (which causes a whole set of problems of its own)?
Rodney

Thank you so much, and I do plan on doing a wipe to clear out my Tab to bring it to a clean slate. Just didn't want it to be a broken state lol.

rhester72 said:
Newbie question of the day - where is the IMEI stored on the 7.7? If it's in /system, won't this result in *everyone* flashing this image ending up with the same IMEI (which causes a whole set of problems of its own)?
Rodney
Click to expand...
Click to collapse
IMEI and such is stored in the mmcblk0p1 partition which (along with 2 and 3 which are the bootloader) we don't touch. So no, we only flash the factory fs, lte modem and kernel. CDMA modem.bin via the new method.

electron73 said:
Hi everyone. As pretty much everyone of us who got suckered into buying this excellent (hardware) tab from Verizon knows, their update strategy has been very slow and on top of that, glitchy. Finally, 4 months after the other editions of this tab, we're getting ICS... BUT the update is an incremental OTA update that fails on 99% of the tabs, because it expects a version FD01b instead of the FD01 most of us have. The update seems to have gone through for only 2 or 3 lucky users who must somehow have had FD01b on their tab when they got it.
So after one of the best collaboration efforts on the "Tab 7.7 General" forums, I am happy to present to you
The CWM flashable "full stock" ROM for the SCH-i815 - ICS IMM76D.LP10
First up, let me stress again that this is a HACK and that this is RISKY and that if something goes wrong you MAY end up with a BRICK that will require complicated revival ceremonies! Unfortunately I *have* to say here, that whatever you do here, you do AT YOUR OWN risk, I can not be held liable for anything!
Prerequisites:
Verizon SCH-i815 LTE Tablet (ONLY this version!) with Honeycomb (everyone should have FD01 at this point)
Windows PC with Samsung USB drivers installed, meaning when you connect the tab, you should be able to copy files to it.
A micro-SD Card 2GB or bigger, preferable BLANK, FAT32 formatted.
Step 1: Prepare the SD card
Connect the SD card to your PC and copy the ROM files to it.
ICS ROM: http://electron73.org/XDA/i815/electron_ICS-LP10_i815.zip
Modem Upgrade: http://electron73.org/XDA/i815/electron_ICS-LP10_i815_modem.zip
Make sure you have MORE than 1GB of free space left on the SD card when done.
Step 2: Download the Odin CWM Recovery pack and get ready to flash
Odin Pack: http://electron73.org/XDA/i815/electron_i815_odin_pack.zip
This ZIP contains everything you need now and later during this process. Extract it in any folder you like (Desktop/Odin or C:\Odin).
Run Odin3 v1.85.exe
Step 3: Bring the tab into Odin mode
Hold down the power and volume down buttons on your tab continuously until you see the big warning. Press volume UP to enter flash (odin) mode. Connect USB. In Odin the leftmost ID:COM field should now be yellow. Click the PDA button and select the cwm-6.0.1.1-i815.tar file. Leave everything else as-is. Click start to flash and when it says rebooting immediately grab the tab and hold down power and volume UP until you see the blue CWM screen! If you don't do this and let the tab boot, then it will automatically kill CWM (yes, bastards!), so don't let it boot the regular ROM!
Step 4: Flash the ICS ROM
Insert the card into the tablet, then in CWM go to install zip from sdcard, then choose zip from external sdcard. Select the electron_ICS-LP10_i815_v2.zip.
It will flash the kernel, the radio (LTE modem), the factory fs (/system) and preload partitions. The whole flash will take about 5 min. Especially on the last two steps be patient, it takes a while to extract 800mb and then flash the full filesystem image. Turning off power here (or running out of battery juice!) will make the rom unbootable and will require a full re-do. IMPORTANT: This requires the use of an external SD card! Using internal storage will not work!
BTW there is NO NEED to wipe! You can simply install ICS over an existing Honeycomb setup! Since this was originally an OTA, it knows how to convert your saved data. So all your emails, save games etc. will still be there!
Step 5: Flash the old Honeycomb recovery in order to do the modem upgrade
Since CWM does not understand the proprietary command used to flash the "firmware" which is the base modem file, we need to use STOCK recovery for this. The downside is that, of course, the new recovery is now locked down and won't accept unsigned files. So we need to flash the OLD Honeycomb FD01 recovery and feed it the modem update!
When the CWM flash above is finished and tells you to reboot, simple press and hold power and vol down again to get back into ODIN mode. Connect the USB again and this time use Odin the same way as above, but to flash the FD10_recovery.tar. This time uncheck the "reboot" tick mark.
Step 6: Flash the modem upgrade with the old stock 3e recovery
When Odin is done above, hold down pwr and vol up until you see the old school recovery pop up saying *manual mode*. Select flash update zip from sdcard and select the electron_ICS-LP10_i815_modem.zip this time. It will go on for a while in total bling flight. No output apart from rotating gears! This one is tricky. Just wait until it either ends saying that it is done or a yellow exclamation point shows up in the middle of the screen. The flash is done.
Step 7: Choose between Stock and CWM
Now bring the tab back into ODIN mode one last time (pwr + vol down) and Connect USB, then flash either CWM or LP10_recovery if you rather like to be full stock. If you chose CWM then be aware that the ROM will try to overwrite that immediately on first boot!! In order to avoid that, flash it with "reboot" box unticked and manually reset into CWM mode (pwr + vol up) and inside CWM select reboot system. It will then give you a big warning that the ROM has a CWM killer and offers you to disable that, so CWM will stay in place (good for Nandroids etd).
Step 8: Boot the ICS ROM and enjoy!
Once you see ICS, go to the play store and install SuperSU. The rom is pre-rooted and just needs the SuperSU app for full root access control.
Trouble?
If the tab for some reason gets stuck in a boot loop with the Verizon animation playing over and over, don't fret! Give it AT LEAST 10 full minutes to start with and if it still doesn't show the home screen after that, hold down power and vol up until you're in CWM and wipe data/factory reset (yes, that will completely kill all user data and the tab will be "like new").
Trickier: If you see any warnings in CWM or 3e stock recovery, that there was an error mounting /data, then you lost the data partition and need to do extensive hacking before the tab will ever boot again. We fixed exactly this problem beginning on the very bottom of the page here http://forum.xda-developers.com/showthread.php?t=1927392&page=16 so don't panic! This repair surgery thanks to the excellent guide by Androguide.fr here: http://forum.xda-developers.com/showthread.php?t=1862294
Thanks
Thanks to everyone involved in making this happen! Especially asenduk for dumping the image backups from his tab, rayjr13 for bringing this whole thing to my attention and sending me the first OTA bin file.
Every use of the thanks button is greatly appreciated
Click to expand...
Click to collapse
Hey Electron, thanks again for your outstanding work as well as all involved to make this happen. Since I installed your V2 this morning, I can skip the ICS ROM installation and go straight to step 5 right? Or is it better to start over from scratch?
Sent from my Nexus 7 using xda premium

bathanr said:
Hey Electron, thanks again for your outstanding work as well as all involved to make this happen. Since I installed your V2 this morning, I can skip the ICS ROM installation and go straight to step 5 right? Or is it better to start over from scratch?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Same here, what steps do I take to flash the updated modem

Awesome!

ice0901 said:
Same here, what steps do I take to flash the updated modem
Click to expand...
Click to collapse
from step 5 on forward. no need to reflash the whole rom if you already have ICS running.
Just odin the old recovery on, flash the modem update zip, then odin the new recovery or CWM back.

boot loop
Not sure whats up. Ive had your rom on all day. No problems. When i went to install the modem update, i entered odin and installed stock recovery, and boom, went into a verizon logo boot loop. i continued any way with the modem install, then put cwm back on, then wiped and data factory reset. waited 10 minutes during bootloop. Gave up, totally reflashed entire V2 Rom, again, stuck on a bootloop...so nwiped and data factory reset again,,,,still a bootloop....
bummer...does it just run until battery dies?

rspong said:
Not sure whats up. Ive had your rom on all day. No problems. When i went to install the modem update, i entered odin and installed stock recovery, and boom, went into a verizon logo boot loop. i continued any way with the modem install, then put cwm back on, then wiped and data factory reset. waited 10 minutes during bootloop. Gave up, totally reflashed entire V2 Rom, again, stuck on a bootloop...so nwiped and data factory reset again,,,,still a bootloop....
bummer...does it just run until battery dies?
Click to expand...
Click to collapse
Weird. OK did the v2 flash go all the way through? Did it finish at some point and say "please reboot" ? Or did it get stuck half way though?
Can you in CWM mount your internal storage? Did you get any errors when you did the full wipe/factory reset? anything saying "error mounting /data" maybe ?

electron73, did you create the .pit file in the cwm zip? It does not seem to match my i815 (which may be my problem, that mine is wrong)

I noticed the latest stock rom is like 550mb opposed to the one you uploaded this morning which was 990mb.. Is there a difference?

almus said:
electron73, did you create the .pit file in the cwm zip? It does not seem to match my i815 (which may be my problem, that mine is wrong)
Click to expand...
Click to collapse
No I didn't create it but it is guaranteed the right one for i815. I know because I messed up my partition table last night and had to use that pit to repartition Lucky I found that. What you would do in order to re-do your pit is open odin, put the CWM in the PDA section as usual and then click PIT and select that pit. That should activate a checkbox "repartition device". Leave that on for this one run and click start.
As a result it should partition, then flash the CWM and you should immediately be able to enter CWM. With CWM running connect USB
and use adb shell to get onto your tab.
IN the root prompt enter parted /dev/block/mmcblk0
and in the parted prompt enter print. If you see the result as in the attached pic (note: no file system in the DATAFS line) then you need to fix that the same way ice got it fixed last night. I think the link to the thread is in the OP

bathanr said:
I noticed the latest stock rom is like 550mb opposed to the one you uploaded this morning which was 990mb.. Is there a difference?
Click to expand...
Click to collapse
Yes the difference is that the preload partition (550mb decompressed) is not included any longer. Not needed. It was never altered in the first place. It only contains a game and useless verizon demonstration videos. I found out later that it had been untouched since Honeycomb FA02c

Yes. V2 went through with no problems.in CWM I can mount efs,cache,system but not data. Then in cwm... OK..wiping data then I get a error mounting data. Skipping format
Sent from my DROID RAZR using xda premium

chefdave12118 said:
What is this brick bug people speak of? Bricking during a flash or bricking when you're sleeping at night and doing nothing to the tab?
Thanks again for this Rom electronic73! Hopefully some devs will take this as a base and run with it!
Sent from my SCH-I815 using xda premium
Click to expand...
Click to collapse
The flash controller in our tablets is buggy. See here http://forum.xda-developers.com/showthread.php?t=1862294

electron73 said:
Yes the difference is that the preload partition (550mb decompressed) is not included any longer. Not needed. It was never altered in the first place. It only contains a game and useless verizon demonstration videos. I found out later that it had been untouched since Honeycomb FA02c
Click to expand...
Click to collapse
Thanks again man.. You have put forth an awesome effort in this work.. Sent you a little something as an appreciation:good:
---------- Post added at 09:43 PM ---------- Previous post was at 08:46 PM ----------
bathanr said:
Thanks again man.. You have put forth an awesome effort in this work.. Sent you a little something as an appreciation:good:
Click to expand...
Click to collapse
I ran into the splash screen just hanging and followed the data retore steps. I keep getting this error when trying to print the print command from the parted prompt.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Flatlinz>f:
F:\>cd 7.7
F:\7.7>cd adb
F:\7.7\adb>adb shell
adb server is out of date. killing...
* daemon started successfully *
~ # ls
ls
boot init sys
cache init.rc system
charger lpm.rc tmp
data preload ueventd.goldfish.rc
default.prop proc ueventd.rc
dev recovery ueventd.smdk4210.rc
efs res vendor
etc sbin
external_sd sdcard
~ # parted /dev/block/mmcblk0
parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
print
print
Error: Can't have the end before the start!
(parted)
Any ideas?

Stuck without a OS

Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
E:failed to open/etc/recovery.fstab (No such file or directory)
E:unknown volume for path[/cache/recovery/command]
E:Can't mount /cache/recovery/command
E:unknown volume for path [/cache/revovery/log]
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:unknown volume for path [/cache/recovery/last_log]
E:Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:unknown volume for path [/cache/recovery/command]
Click to expand...
Click to collapse
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out

deathstoned said:
Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out
Click to expand...
Click to collapse
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 1:
I) Download Android 2.3.6 Gingerbread Value Pack (XXJVU)
II) Download ODIN http://www.mediafire.com/?nhhhkm5c2j43rhw Extract Odin3 v1.7.zip to get .exe file
also download the pit file, http://www.mediafire.com/?v2rub40k1bvccj4
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.

I had this problem with Paranoid Android before... the zip was corrupt.
If you are able to extract the rom with winrar/winzip/totalcmd or other program, install it, if it is corrupt, download it again again and again...
Sent from my GT-I9000 using xda premium

Samtan4326 said:
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.
Click to expand...
Click to collapse
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
-- wiping data...
Formatting /data...
E:format_volume: rfs format failed on /dev/block/macblk0p2
Formatting /dbdata...
formatting /cache
Deleting meta data
Data wipe Failed
-- Applying Multi-CSC..
Installing Multi-CSC
APPLIED THE csc-Code "CPW"
Successfully applied multi-CSC
Click to expand...
Click to collapse
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then

deathstoned said:
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then
Click to expand...
Click to collapse
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman

Samtan4326 said:
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman
Click to expand...
Click to collapse
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
E:unknown volume for path [/system]
E:unable process volume! Skipping...
Checking /data...
E:unknown volume for path [/data]
E:unable process volume! Skipping...
checking /cache...
E:unknown volume for path [/cache]
E:unable process volume! Skipping...
Done!
E:unknown volume for path [/cache/recovery/command]
E;Cant mount /cache/recovery/command
E:unknown volume for path [/cache/recovery/log]
E:Cant mount /cache/recovery/log
and the same for last_log
Click to expand...
Click to collapse

deathstoned said:
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
Click to expand...
Click to collapse
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.

Samtan4326 said:
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.
Click to expand...
Click to collapse
I dont think you got what i said.I installed CFW and went into the recovery,there under Mounts and storage ,there was nothing apart from "mount USB storage"..not even Mount BOOT..nothing apart from that 1 option..when i tried to do a wipe "data/factory reset or cache" it showed me that message which i posted above.still i installed the jvu+root again (Twice actually),it was the same result,the error i posted 2 posts above.
I'm in no mans land now and cant do anything apart from my phone apart from go into download and recovery mode

Please someone help me,i've to go on a 33 hr train journey tmrw and without a phone,it'll be really troublesome

Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000

amerkiller1995 said:
Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000
Click to expand...
Click to collapse
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors

deathstoned said:
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors
Click to expand...
Click to collapse
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000

amerkiller1995 said:
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000
Click to expand...
Click to collapse
Ok dont know whether this is good or bad
I installed CM9 from the external sd as the internal sd was inaccesible in any way..the installation showed info like
"the internal sd card marker could not be found
Going ahead with installation"
the installation continues and restarts once and updates but it does not boot into the main page,it directly goes into the Encryption Unsuccessful page.When i try Reset Phone,it goes into the CWM recovery screen with some errors,
when i try to install CM10 from this recvery screen,it initially stops the installation saying the data partition layout is different and all my data will be wiped.run the .zip to go ahead with the progress.I run this it goes directly into the CWM 6.0._._ and it doesnt show any errors,i try to reboot it gets stuck on the galaxy s screen.
this situation is better than the previous condition as i know a OS can still run on my Phone..Just need to get this thing rectified now

Please if anyone could help me right now,i would be really grateful..not able to contact anyone without my phone

It might be a hardware problem... I had something similar
http://forum.xda-developers.com/showthread.php?t=1895224
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000

amerkiller1995 said:
It might be a hardware problem...
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000
Click to expand...
Click to collapse
I installed Cyanogen 9 and got through tht EU page by restarting abut 20 times or so,now i'm trying to install a working version of gapps in it.Tried 1 but the setup failed,so i flashed back to Cyanogen 9 and am not touching it till i reach home.a device capable of making and taking calls is better than nothing..
Is there a way to download contacts from gmail without gapps,the play store is not included in the original rom and i'm hesitant to go into CWM recovery mode as i will have to tackle the EU page again
Anyways thanks for your help,will have to fix this problem once and for all after i reach home

I don't know about contacts from gmail. When you're home look at my updated post above
Sent from my GT-I9000

basically
just reflash gingerbread

[Q] Clear Install Android 4.0.4

Hi..
I want to clean install Android 4.0.4 OS on my Samsung galaxy s plus (GT-19001) device.
Clean install means that i 'll have to install OS from scratch. Does i need Micro USb Jig for this purpose?
I have below files.
1-> cm-9-20121011-ivendor-ariesve-rc5.zip
2-> gapps-ics-20120429-signed.zip
3-> recovery-clockwork-6.0.1.2-ariesve.zip
4> CWM-based recovery v5.5.0.4
Guide me in simple steps , i tried many times to install ICS (Android 4.0.4) but unfortunately unsuccessfull each time.
Why it didn't work for me?
I have tried in many ways. Thanks in advancee

Hey,
Could you tell me what was unsuccessful about the install? Did it stop installing, did it bootloop, so on so forth?
But this is how I flashed CM9 onto my I9000, and I know that the I9001 is very similar so...
1.) You've got CWM, sweet. Boot into recovery. Make a bckup of your data through the option provided.
2.) Wipe data/cache/Dalvik cache. The first two are pretty simple to do, the last one is under "Advanced" settings.
3.) Now that you've got that, select "Install zip from SD". Navigate to where your CM9 file is. Select and confirm. Wait for it to flash in...
4.) At this point you might get a recovery bootloop. Don't panic here- just take out the battery, reinsert. Reboot into recovery. You should see that your recovery has been updated.
5.) Reselect the rom from the "Install zip from SD" option. This time it should start flashing in. Wait for it to finish, then it should reboot normally. Be patient as it boots up for the first time.
6.) Once you've done so, reboot into recovery again but this time select the gapps zip.
Unless the I9001 is different in a major way in terms of installing, that should work. I'm not quite sure...
Hope I helped
Sent from my GT-I9000

support required
Soryuu said:
Hey,
Could you tell me what was unsuccessful about the install? Did it stop installing, did it bootloop, so on so forth?
But this is how I flashed CM9 onto my I9000, and I know that the I9001 is very similar so...
1.) You've got CWM, sweet. Boot into recovery. Make a bckup of your data through the option provided.
2.) Wipe data/cache/Dalvik cache. The first two are pretty simple to do, the last one is under "Advanced" settings.
3.) Now that you've got that, select "Install zip from SD". Navigate to where your CM9 file is. Select and confirm. Wait for it to flash in...
4.) At this point you might get a recovery bootloop. Don't panic here- just take out the battery, reinsert. Reboot into recovery. You should see that your recovery has been updated.
5.) Reselect the rom from the "Install zip from SD" option. This time it should start flashing in. Wait for it to finish, then it should reboot normally. Be patient as it boots up for the first time.
6.) Once you've done so, reboot into recovery again but this time select the gapps zip.
Unless the I9001 is different in a major way in terms of installing, that should work. I'm not quite sure...
Hope I helped
Sent from my GT-I9000
Click to expand...
Click to collapse
Hi.
I just started with CWM-based recovery v5.5.0.4 and placed all above mentioned files/packages into the device internal SD card.
That's what i did :
1). Entered into the recovery mode menu by holding down Volume Up + Power and installed CWM-based recovery v5.5.0.4 zip from the selection of Internal SD Card .
2). After reboot, i came up again in Recovery mode using CWM-based recovery v5.5.0.4 application.
3). Now installed cm-9-20121011-ivendor-ariesve-rc5.zip by the navigation of "Install zip from SD".
It took hardly 4 to 5 seconds and displayed a message that it completes . no flash screen or anything came up and reboot.
4). After that installed gapps-ics-20120429-signed.zip by the navigation of "Install zip from SD".
It displayed same complete message but within 5 to 8 seconds i think.
5). I Wipe data/cache/Dalvik cache after above step and then again repeat the process.
After that i did Wipe data/factory reset and wipe cache partition.
Now when i try to start my device then each time it comes into the CWM-based recovery v5.5.0.4' s recovery mode.
Ask please i have tried too many things with it but yet not soft bricked.
I am able to switch into Download mode.

Soryuu said:
Hey,
Could you tell me what was unsuccessful about the install? Did it stop installing, did it bootloop, so on so forth?
But this is how I flashed CM9 onto my I9000, and I know that the I9001 is very similar so...
1.) You've got CWM, sweet. Boot into recovery. Make a bckup of your data through the option provided.
2.) Wipe data/cache/Dalvik cache. The first two are pretty simple to do, the last one is under "Advanced" settings.
3.) Now that you've got that, select "Install zip from SD". Navigate to where your CM9 file is. Select and confirm. Wait for it to flash in...
4.) At this point you might get a recovery bootloop. Don't panic here- just take out the battery, reinsert. Reboot into recovery. You should see that your recovery has been updated.
5.) Reselect the rom from the "Install zip from SD" option. This time it should start flashing in. Wait for it to finish, then it should reboot normally. Be patient as it boots up for the first time.
6.) Once you've done so, reboot into recovery again but this time select the gapps zip.
Unless the I9001 is different in a major way in terms of installing, that should work. I'm not quite sure...
Hope I helped
Sent from my GT-I9000
Click to expand...
Click to collapse
Perfectly simple guide! Thanks.:good:
The only thing I want to ask - what is the backup you have mentioned in point 1)? Is it back up of your personal data, or is it back up of your current ROM?

Hey man, glad I made it simple
Yeah, its a backup of your whole rom I believe- system apps, system files, all your downloaded apps all your data, so on so forth.
Helps you get back to what you were running before in case something goes wrong during installation.
Sent from my GT-I9000
---------- Post added at 02:29 PM ---------- Previous post was at 02:15 PM ----------
empnetsol said:
Hi.
I just started with CWM-based recovery v5.5.0.4 and placed all above mentioned files/packages into the device internal SD card.
That's what i did :
1). Entered into the recovery mode menu by holding down Volume Up + Power and installed CWM-based recovery v5.5.0.4 zip from the selection of Internal SD Card .
2). After reboot, i came up again in Recovery mode using CWM-based recovery v5.5.0.4 application.
3). Now installed cm-9-20121011-ivendor-ariesve-rc5.zip by the navigation of "Install zip from SD".
It took hardly 4 to 5 seconds and displayed a message that it completes . no flash screen or anything came up and reboot.
4). After that installed gapps-ics-20120429-signed.zip by the navigation of "Install zip from SD".
It displayed same complete message but within 5 to 8 seconds i think.
5). I Wipe data/cache/Dalvik cache after above step and then again repeat the process.
After that i did Wipe data/factory reset and wipe cache partition.
Now when i try to start my device then each time it comes into the CWM-based recovery v5.5.0.4' s recovery mode.
Ask please i have tried too many things with it but yet not soft bricked.
I am able to switch into Download mode.
Click to expand...
Click to collapse
Hmmm... Okay, I see...
What recovery did you start with before flashing CWM 5.5.0.4? Because I think what happens is that in whatever recovery you start with, you start by flashing in the CM9 file directly, instead of flashing a different CWM version in first.
So a good place to start would be back at 2.3.6 (don't know the firmware for the I9001). That can be done through download mode and Odin (If you need help with that feel free to ask). Then root again, get recovery back.
Flashing in the CM9 file the first time actually doesn't take long- maybe 5-10 seconds as you said, before bootlooping. What that bootloop does is it actually sets up a newer recovery, so that you can properly flash CM9 in.
Once you flash in the CM9 file the first time, try flash it in a second time. If it takes 4-5 seconds again then you have a problem, otherwise it should take a little bit for the file to install.
It will reboot; like I said in my little guide, just turn off, reboot into recovery and flash in Gapps, then let it boot.
Also, I don't think you need to wipe everything after the CM9 zip finishes. I didn't need to, and it worked fine...
Again, hope I helped
Sent from my GT-I9000

hi .
i am trying to give answer in point:
What recovery did you start with before flashing CWM 5.5.0.4?
-> yes i t was exactly CWM 5.5.0.4.
Because I think what happens is that in whatever recovery you start with, you start by flashing in the CM9 file directly, instead of flashing a different CWM version in first.
-> Could you elaborate the above sentence please? As long as i understood I initially installed CWM recovery through recovery mode by holding +Vol + Power+ Home.
So a good place to start would be back at 2.3.6 (don't know the firmware for the I9001). That can be done through download mode and Odin (If you need help with that feel free to ask). Then root again, get recovery back.
-> Yes i have been reverted through Odin Stock Gingerbread. How to root again? Could you please enlist in points?
Flashing in the CM9 file the first time actually doesn't take long- maybe 5-10 seconds as you said, before bootlooping. What that bootloop does is it actually sets up a newer recovery, so that you can properly flash CM9 in.
-> I don't think it's a bootlooping situation. When i start my device , It dispays CWM recovery screen each time even after the sucessull completion of CM9 and gapps,
Once you flash in the CM9 file the first time, try flash it in a second time. If it takes 4-5 seconds again then you have a problem, otherwise it should take a little bit for the file to install.
It will reboot; like I said in my little guide, just turn off, reboot into recovery and flash in Gapps, then let it boot.
-> I tried it many time right now and 2-3 months ago too but it took almost 20 - 30 seconds in first attempt.
Also, I don't think you need to wipe everything after the CM9 zip finishes. I didn't need to, and it worked fine...
-> I tried through Wipe and with it but could start my OS. Instead it display everytime a CWM screen.
=================================================================================================
In last , i did below steps :
1) Boot into recovery.
2) Wipe data/Factory reset.
3) Wipe cache.
4) Go to Advanced, then wipe Dalvik cache.
5) Go back, go to Mount & Storage, then Format System.
6) Go back, go to Install zip from SD Card => Choose zip from SD Card => cm-9-20121011-ivendor-ariesve-rc5.zip.
7) Do the same thing for the gapps zip.
8) Wipe data/Factory reset again (just to be sure).
9) Reboot.

Go into the cm10 thread by ivendor in developement section and in the middle of the 1st post is a download link for cwm 6.0.1.9. Flash it in recovery and reboot. The Problem should be gone.
Had the same issue.
Hope i helped

Hi Markey.
Do you mean that I 'll have to get CM10 and CWM 6.0.1.9 and then installed with same approach as i aforesaid?
Elaborate please if i misunderstood. Thanks

empnetsol said:
Hi Markey.
Do you mean that I 'll have to get CM10 and CWM 6.0.1.9 and then installed with same approach as i aforesaid?
Elaborate please if i misunderstood. Thanks
Click to expand...
Click to collapse
No i meant that you can install everything like in your guide and after that you install the cwm 6.0.1.9 and reboot, then you should be in recovery and then you have to reboot your phone and it should start normally
This solved it for me
Hope i helped

That's what I understood now:
0.5) Entered into the recovery mode menu by holding down Volume Up + Power and installed CWM-based recovery v5.5.0.4 zip from the selection of Internal SD Card .
1) Boot into CWM-based recovery v5.5.0.4 Recovery mode.
2) Wipe data/Factory reset.
3) Wipe cache.
4) Go to Advanced, then wipe Dalvik cache.
5) Go back, go to Mount & Storage, then Format System.
6) Go back, go to Install zip from SD Card => Choose zip from SD Card => cm-9-20121011-ivendor-ariesve-rc5.zip.
7) Do the same thing for the gapps zip.
8) Wipe data/Factory reset again (just to be sure).
9) Reboot
10) Then install the cwm 6.0.1.9 and reboot.
It could be solution, i will try and 'll tell at today night (after 6 hours).

It should be the right way but you can skip step 5 and 9
Hope i helped
empnetsol said:
That's what I understood now:
0.5) Entered into the recovery mode menu by holding down Volume Up + Power and installed CWM-based recovery v5.5.0.4 zip from the selection of Internal SD Card .
1) Boot into CWM-based recovery v5.5.0.4 Recovery mode.
2) Wipe data/Factory reset.
3) Wipe cache.
4) Go to Advanced, then wipe Dalvik cache.
5) Go back, go to Mount & Storage, then Format System.
6) Go back, go to Install zip from SD Card => Choose zip from SD Card => cm-9-20121011-ivendor-ariesve-rc5.zip.
7) Do the same thing for the gapps zip.
8) Wipe data/Factory reset again (just to be sure).
9) Reboot
10) Then install the cwm 6.0.1.9 and reboot.
It could be solution, i will try and 'll tell at today night (after 6 hours).
Click to expand...
Click to collapse
It should be the right way but you can skip step 5 and 9
Hope i helped

Dear Markey,
Whyn't should i start from cwm 6.0.1.9 rather than CWM-based recovery v5.5.0.4 .
Should i require to check from it or not? cwm 6.0.1.9 support cm-9-20121011-ivendor-ariesve-rc5.zip ?

empnetsol said:
Dear Markey,
Whyn't should i start from cwm 6.0.1.9 rather than CWM-based recovery v5.5.0.4 .
Should i require to check from it or not? cwm 6.0.1.9 support cm-9-20121011-ivendor-ariesve-rc5.zip ?
Click to expand...
Click to collapse
I don't know if cwm 6.0.1.9 supports cm9 but it should.
You could try it out and tell me back

when i go in advance and select wipe dalvik cache option.
it display an error:
E:unknown volume for path [/sd-ext]
Dalvik Cache wiped.
After completion of each step, i tried again but still not start OS.

empnetsol said:
when i go in advance and select wipe dalvik cache option.
it display an error:
E:unknown volume for path [/sd-ext]
Dalvik Cache wiped.
After completion of each step, i tried again but still not start OS.
Click to expand...
Click to collapse
Got the same error, i think its normal
Ok, then flash this file: http://forum.xda-developers.com/attachment.php?attachmentid=861538&d=1326841043 in recovery, reboot and tell me back if it works
Or you could try this way if the other isn't working: http://forum.xda-developers.com/attachment.php?attachmentid=928219&d=1330695090 its the stock recovery, flash it in recovery and reboot and tell me back. I think you should first try stock recovery and then the other file. Sry for the wrong order
Hope it will work again

hi markey.
how to flash these files? i didn't understand the flashing word.

Got an error from mentioned recoveries.
Installing update...
E:Error in /tmp/sideload/package.zip
(Status 2)
Installation aborted.

empnetsol said:
hi markey.
how to flash these files? i didn't understand the flashing word.
Click to expand...
Click to collapse
empnetsol said:
Got an error from mentioned recoveries.
Installing update...
E:Error in /tmp/sideload/package.zip
(Status 2)
Installation aborted.
Click to expand...
Click to collapse
I mean that you have to install them via recovery with install update from sd card or with install zip from sd card -> its called flashing
And i meant that you have to install the first file first and reboot and if its not working when you reboot then install the stock recovery and then the problem should be solved. But then you have to flash the cwm recovery everytime you want to flash something like a new kernel or a custom rom
Hope i could help

Markey,
I did the same as you are saying and got the above error on each file.
Could you explain the below linw please ?
But then you have to flash the cwm recovery everytime you want to flash something like a new kernel or a custom rom
What i 'll have to do now?

empnetsol said:
Markey,
I did the same as you are saying and got the above error on each file.
Could you explain the below linw please ?
But then you have to flash the cwm recovery everytime you want to flash something like a new kernel or a custom rom
What i 'll have to do now?
Click to expand...
Click to collapse
Which recovery do you use?
Cwm or stock recovery?
If you use stock then you have to reboot without installing one of the files and the problem should be solved
I meant that if you want to install another kernel or custom Rom you have to install the cwm recovery because its better then stock and after installation of the Rom or kernel you have to reinstall the stock recovery
If you don't understand i'll write you a guide for what you have to do