Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.
Related
As you are about to see, I'm new to this.
I have been attempting to root my Captivate. I have tried Galaxy One Click Root and Super One Click 1.7, among others.
My phone won't enter recovery mode. I have tried to install z4root, which the phone blocks. I've tried using sideload wonder machine, which doesn't work either.
I downgraded to 2.1....nothing. Reloaded 2.2....nothing.
Any advice would be helpful at this point, and please be specific, as I am slightly retarded.
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
ryanmahan said:
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
That's not a rumor, it's a fact. Does not happen with all models.
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
mrhaley30705 said:
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
Click to expand...
Click to collapse
As I said, I'm slightly retarded. Do you know of a forum with instructions for doing this? Everything else I've tried has just caused a face to appear on my phone's screen laughing at me.
When you use super one click, did you enable usb debugging?
Sent from a place my wife doesn't know about
The captivate is actually an extremely easy root process...
Download this file update.zip
Put it on your internal SD card (internal Memory) not your SD card you can remove
Turn off your phone
Once off hold both volume up and down and hold power until you see the AT&T boot screen then let go of all 3 buttons. You should see recovery mode soon. Select Reinstall Packages, congratulations you are now rooted.
Is that the modded cwm? I think he said he was on 2.2. Regular cwm won't work with froyo(signature verification errors). There is a modded one somewhere on this site that either replaces 3e, our fixed sig on cwm.
Sent from a place my wife doesn't know about
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
jayjr1105 said:
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
Click to expand...
Click to collapse
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
you must not have the right drivers installed.
2.2 cannot be rooted by using an update.zip....you will need to get your drivers working and adb seeing the device....
sharp1114 said:
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
Click to expand...
Click to collapse
sounds like you need the 3button fix first. there is an odin stock rom+3button fix, it should take you to 2.1 but you will get recovery mode. if that fixes the recovery mode 3-button combo and the phone boots you can put the rom of your choice on the sd card, then odin flash speedmod kernel and flash the new rom, warning the phone doesn't boot a 2.1 rom with speedmod kernel, i only do this as a faster way to get into cwm recovery, only do that if you intend to flash a rooted rom from 2.1.
Dani897 said:
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
all of the available roms are stable. to be honest TiBu will remove bloat if you want it to.
Try them all and see which one you like. Pretty much all of the custom roms are better than stock. If you like to stay near stock but run more optimized, see Cognition. Otherwise see which one you like more. It's not a hard process if you read up on it.
sharp1114 said:
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
Click to expand...
Click to collapse
it is hard to go wrong with cognition which is a stock rom with some mods and bloat removed and tethering enabled, that will have the proper kernel and modem for the captivate which for me has great call quality, also the disadvantages of not having hsupa are overblown.
there is also andromeda which is the rom from the armani captivate and is well polished and complete, has some of the more useful samsung apps. this can be used with a 2.2.1 kernel ported from the i9000 for a slight speed boost (shows in benchmarks, may not be detectable in user experience) this has hsupa and is designed for the captivate
i9000 ports are newer 2.2.1 versions and all of the features work now so you may want a newer firmware version from one of those..
there are many 2.2.1 i9000 roms that are fully functional. that is more a matter of feature set and theme preference it is hard to say one is better than the other. id say for stable the speedmod kernel is about the best on an i9000 port, for experimenting with overclock or undervolt i hear that the kernel with paragon is awesome.
now it is odd that you say you flashed a different version of 2.2 but cant get into recovery, was that in odin? can you get download without adb commands?
Dani897 said:
im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Use this method to flash back to stock. Supposed to be much safer that doesn't mess with the bootloader files. I have been using it for about 3 weeks now to flash back to stock. You CAN however still use the one click odin to master clear once you have flashed back to stock.
Back on topic... I would flash back to 2.1 using the above method and master clear to start fresh with this issue. Once that is done look for mobiletechvideo's 3 button fix video on youtube. But even if you have 3 button issues the Galaxy S one click root program should still get you into recovery. It doesn't always succeed in copying the update.zip file to the internal SD card but you can do that manually and just use the program solely to get into recovery. Make sure you have USB debugging on. After the stock flash and master clear it is off by default and samsung kies is on. You might want to invest in a Jig also since you have 3 button issues, it may save you hide someday.
As far as a good rom goes. Really all the 2.2.1 roms are pretty stable and fast. I'm currently using Continuum 4 with the paragon kernel and it floats and sips battery. If you like the stock look you can use cognition. If you like the green themed gingerbread look you can use Phoenix, Serendipity, Firefly, or Paragon which is my personal fav but hasn't been updated in a month.
Anyways good luck. I'm sure you'll figure it out.
oops, got double posted somehow
Thanks for all your advice and help. I finally got it rooted.
I've tried Cognition 4.3 and Paragon, both of which I liked. I like the appearance of Paragon, but the optimization just doesn't seem to be there. Cognition is great for customization, but I the appearance is just to 'stockish' for me, if that makes sense. Something in between would be nice. (Ideas?)
I plan to try Phoenix Unleashed, but i can't get it to download.
The reason why the programs are having a hard time seeing your cappy is because you need the Serial COM driver available only by installing Samsumg's software: Kies Mini... don't run the program just install it. Once you do this Odin and the Wonder Root program can see the phone. I had this issue.
I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol
Sent from parts unknown.
Boraltis said:
I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol QUOTE]
Just read over the op for C5. if you already have the 2.3 boot loaders you only need to flash the no boot version in recovery. The instructions in the op are very detailed.
Click to expand...
Click to collapse
Also, im running Continuum 5 and it is real nice...
Thanks.
Sent from parts unknown.
Read the first 10-20 pages of C5 thread. Also, I don't think cm7 has2.3.3 bootloaders.
Sent from my GT-I9000 using XDA App
You could always try flashing it without bootloaders and check it out. I have tried the other 2.3.3 ROMS out there and I find this one to be really smooth with very little issues. Battery is good, Rotation is great, Camera works good. If you have a Jig, you should not have any problems with ODIN.
When I went from CM7 to Continuum, I flashed back to Stock first just to be safe. Continuum V.5 RC2 is by far less buggy and smoother than CM7 in IMHO. I love it.
Boraltis said:
I am already on CM7. Everything is fine, but I would like to flash Continuum. I already have 2.3.3 (and presumably the bootloaders). My question is: Exactly what method should I use to install? I try to avoid ODIN if I can help it. It gives me panic attacks. Lol
Sent from parts unknown.
Click to expand...
Click to collapse
CM7 doesn't have the new bootloaders. flash to stock then flash continuum with bootloaders.
Sent from my Captivate using XDA Premium
longr6 said:
You could always try flashing it without bootloaders and check it out. I have tried the other 2.3.3 ROMS out there and I find this one to be really smooth with very little issues. Battery is good, Rotation is great, Camera works good. If you have a Jig, you should not have any problems with ODIN.
Click to expand...
Click to collapse
Flash w/o bootloaders and you lose recovery. Then you have to use odin to go back to stock.
Sent from my GT-I9000 using XDA App
The process layed out in the first post for Continuum works perfectly, I wouldn't be worried about flashing the one with bootloaders, as long as you READ every step in detail first!
Using Heimdall in Linux to install Continuum
I'm ready to install Continuum v5, but would prefer to avoid Odin and Windows. I'm running Cognition 4.3.1 now; installing that was easy, just using CWM recovery.
Anyone know how to install Continuum using Heimdall? Also, how do I flash back to stock using Heimdall?
TIA.
Doesn't Continuum v5 have ext4 by default?
Someone on the main Continuum forum said that the ext4 file system does not come installed by default but it could be enabled using the ext4 app in the app drawer. This sounds ridiculous. To change file systems, you have to do the equivalent of reformatting the partition. In order to not lose all your data, you would have to back up, change the file system, then restore. I doubt very much you could do that with a phone app.
Am I wrong?
Yes you are wrong. The app boots the phone into recovery backs up, converts, restores, and then reboots. All from one button press in the app.
I have used on perception2 beta 1 and took minute rebooted then had nothing change and didn't backup then converted back to rfs and flash beta 2 and lost nothing
Sent from my GT-I9000 using XDA Premium App
what is this rom anyways?? stock gingerbread
studacris said:
Yes you are wrong. The app boots the phone into recovery backs up, converts, restores, and then reboots. All from one button press in the app.
Click to expand...
Click to collapse
Cool. I didn't know it could do that. Is it safe? I'll for sure back up everything before I do it but....
pixbuf said:
Cool. I didn't know it could do that. Is it safe? I'll for sure back up everything before I do it but....
Click to expand...
Click to collapse
Just as safe as doing it from cwm on froyo ... A backup is recommended before you do ANYTHING cause sometimes even the simplest thing can **** something up...
Do I need 3 button combo to install using odin 3 button?
My captivate does not have the 3 button combo, so I have no way to get into download mode on my own. I have never used the Odin 3 button, but am very familiar with Odin one click. Odin one click automatically puts my phone into download mode in order to finish flashing to stock. I am wanting to install continuum v5, and understand the instructions fully, but just wanted to make sure before I started, that I can successfully install using icezars instructions, without the need for 3 button combo. Can anyone confirm if this is possible, or if I need to install the 3 button combo fix that is floating around the forums? Thanks in advance for any help.
I currently have Continuum V4 and used have AIO Captivate Toolbox to install most roms.
First it's not called "odin 3 button" it's just odin 3.
You don't technically need the button combo to flash it but if something goes awry and you end up in s boot loop, or soft brick your only fix then would be a jig...
After you make it to gingerbread you will have a working combo ... The buttons will be different thats in the op of continuum 5 ...
Thanks for clearing that up. I'm not sure where I came up with calling it that, and I've read plenty about Odin 3, but have still been a bit nervous when it comes to utilizing it. I am confident that I can follow directions well, and have read the instructions several times as well as many of the posts. I may have to order myself a jig just in case something does get messed up, but I'm antsy to get me some gingerbread love.
Again, thank you for the help.
I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)
Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD
Ok, thanks. I'll post an update tonight after I get back home.
SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM
HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"
HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!
Hi Everyone,
I bought ROM Manager Premium v4.5.0.1, in order to do a Nandroid backup on my I896 running stock I896UXJL1.
I ran "Flash ClockworkMod Recovery", and it said my Current Recovery 2.5.1.2 was the same as the Latest Recovery. So far so good.
Then I ran "Backup Current ROM." Instead of doing a backup, it rebooted my phone into Recovery "3e" every time. I tried it many times and got the same result.
This is so confusing. For whatever reason the app decides to boot my phone into recovery instead of doing the backup, I would expect it to at least go into CWM Recovery instead of the stock 3e.
Questions:
1. Has any of you gotten rebooted when you try to do a Nandroid backup?
2. Has any of you gotten rebooted into stock recovery even when CWM is installed?
Thanks.
KK
In general ROM manager is trash for SGS. Don't bother with them. I would say find a kernel with CWM cooked in it but JL1 is a rogers only and I don't know any for that.
prbassplayer said:
In general ROM manager is trash for SGS. Don't bother with them. I would say find a kernel with CWM cooked in it but JL1 is a rogers only and I don't know any for that.
Click to expand...
Click to collapse
froyo wasnt so damn kenel picky. any froyo kernel will work.
Doesn't work with any ROM
I've tried ROM manager after flashing KH3 and KJ3, and the "Reboot into Recovery" still doesn't work. I get the triangle-exclaimation-droid screen with nothing else, and it stays that way until I use the 3-button reboot.
Since the app can't even perform one of the more basic functions, I am afraid to let it do anything else. I wish I hadn't paid for the premium version.
ROM manager doesn't work on Gingerbread..... Rom manager isn't very good for Samsung phones
KarateKick said:
I've tried ROM manager after flashing KH3 and KJ3, and the "Reboot into Recovery" still doesn't work. I get the triangle-exclaimation-droid screen with nothing else, and it stays that way until I use the 3-button reboot.
Since the app can't even perform one of the more basic functions, I am afraid to let it do anything else. I wish I hadn't paid for the premium version.
Click to expand...
Click to collapse
Stop what you are doing and read. ROM Manager sucks basically. Very few people on here actually use it. If you keep just throwing things at your phone though without knowing what you are doing you are going to end up with a shiny, expensive, paperweight. Then you get to spend upwards of 50$ getting that fixed. So please, for me, the forum, and your phone just read. Or at very least ask a directed, detailed question. As in: my phone is here, im trying to get to there, this is what im doing and this is where and how its failing.
Flashing using an app
I actually did weeks of reading before flashing my phone for the first time. I got scared by potential problems such as USB interruptions.
This is where I am at: I've been using mostly Odin to flash. I have successfully flashed KH3 and then KJ3 (with KF1 bootloaders and Boog's kernel); however, I am still nervous each time I do anything.
This is where I hope (or used to hope) to get to: I keep looking for a way to minimize the probability of human errors and technical hiccups. (It's a habit I've picked up while working as a software manager.)
I went for ROM Manager because the same developer wrote CWM. I do appreciate you guys sharing your opinion of the app's effectiveness with the SGS. I only wish I had been warned sooner (ideally by the app's developer).
Find ODIN packages that don't inlcude bootloaders. That will only minimize your risk to soft bricks wich can be recovered with a jig that are easy to make and only cost ~ $10 if you choose to buy them. I personally use KH3 as my "stock" setting when I need to flash to stock. I use Cezar's KH3 .tar that doesn't include them but there are atleast 1 1 click around.
CWM for Captivate Gingerbread UCKJ2
Sorry in advance for the noob question. I have read many posts but can't find my answer. I've installed the leaked gingerbread rom from Samsung called uckj2. I was trying to change the modem by flashing a zip file using clockworkmod recovery. I've heard the way to do it is by using a kernel that already has cockworkmod already baked in. Which kernel should I use?
Thanks in advance
KJ2 have 3 kernels that should work. Corn kernek, Samurai and Boog's kernel.
About a week or more ago I downloaded 1987UCKK$ and Corn kernel v705. I flashed them both on my phone (AT&T samsung captivate) and my husbands phone (same). All went well and we love it.
My question is on our sdcard (internal) two files were placed:
ICS 4.0.0 captivate Full zip and ICS captivate update.zip
I have been looking to upgrade to ICS for the captivate and would like to know if I can use these files to do so through CWM??? If so, which one do I use or do I use them both. Any instructions on the order of use would be appreciated...
Thanks
gramme
right now I am runing AT&T Captaivate GB 2.3.5
1897UCKK4
corn kernel 705
gramme66 said:
About a week or more ago I downloaded 1987UCKK$ and Corn kernel v705. I flashed them both on my phone (AT&T samsung captivate) and my husbands phone (same). All went well and we love it.
My question is on our sdcard (internal) two files were placed:
ICS 4.0.0 captivate Full zip and ICS captivate update.zip
I have been looking to upgrade to ICS for the captivate and would like to know if I can use these files to do so through CWM??? If so, which one do I use or do I use them both. Any instructions on the order of use would be appreciated...
Thanks
gramme
right now I am runing AT&T Captaivate GB 2.3.5
1897UCKK4
corn kernel 705
Click to expand...
Click to collapse
My suggestion would be that, if a file was placed on your SDcard that you're not aware of, and aren't sure where you go them from.. and ESPECIALLY if you don't have instructions when you download them, DONT USE THEM. I'm biased, so I'll point you toward my rom. Take a look here, it's ICS: http://forum.xda-developers.com/showthread.php?t=1813917
However, if you take a look around the Android Development forums, there's quite a few roms on there. :]
Agreed...delete those zips...just because of not knowing what they are. And just go with the ICS Rom of your choice and it's specific install instructions in it's OP.
Sent from my SAMSUNG-SGH-I777 using xda premium
Arisenhavok91 said:
My suggestion would be that, if a file was placed on your SDcard that you're not aware of, and aren't sure where you go them from.. and ESPECIALLY if you don't have instructions when you download them, DONT USE THEM. I'm biased, so I'll point you toward my rom. Take a look here, it's ICS: http://forum.xda-developers.com/showthread.php?t=1813917
However, if you take a look around the Android Development forums, there's quite a few roms on there. :]
Click to expand...
Click to collapse
Thank you for your response....I have installed this rom...and it seems to be working fine EXCEPT I am not rooted..I have not been able to find out how to root this can you tell me how:?
Thanks:good:
I am in the recovery mode and it says that the "BACK MENU BUTTON DISABLED"
I am not able to power off or do anything in that list? POWER button not working
Can you help?
I am in the recovery mode and it says that the "BACK MENU BUTTON DISABLED"
I am not able to power off or do anything in that list? POWER button not working
Can you help?[/QUOTE said:
I have the recovery menu working again...the "back menu button was enabled after I used the vol+ vol- keys...not really sure if that is what did it or not but it is working.
Still need to know how to root. I am going to do some more searching
:good:
Click to expand...
Click to collapse
Gosh, this looks like an awesome rom...I found the rooting thing. Titanium wasn't opening and while I was looking around the new interface I found PERMISSIONS>manage ROOT permissions...and all is working fine now....got a lot to learn but I love to do that.
Thank you for suggestion this rom....
Have a great day
I need some help...after putting on my titanium backup of apps&data I restarted..
Now all kinds of errors messages...
exchange service stopped
android.process.media stopped
and others
email will NOT work
what should I do?
I am thinking about installing a cloud rom to see if that will work
My about phone is saying I9000 UGKCI
and I think it should say 1897UCKBI
I used the link that was given to me in the post above installed MIUI 2.8.3...
Please can someone advise me at this point?
Thanks
Start from scratch and re install. When you restore from titanium backup restore apps only. Not system apps. System app or system data will break your phone.
Also, the i9000 is the baseband. Essentially telling you what modem the phone is from. It is cosmetic. If you have any further questions ask in my thread so I can assisy
Sent from my SGH-I897 using xda premium