I have HTC Incredible S, which i update it to the last version 3.08 with HBOOT 2.00.000, I tried to change its CID after downgrading the Main version and i got my phone bricked... So i took it to a store to fix it and they run it alive again... I have the handset now S-OFF with HBOOT 1.13.0000 and android version 2.3.3 and when i try to check for updates it gives me that no updates are available although the update is available to android version 3.08....
What Can I do please help to get my device takes updates again???
At h-boot 1.13 your phone is incredibly easy to root and install custom ROM's on, I suggest you root your phone and install one of the custom ROM's on the dev page opposed to updating to stock.
Sent from my Incredible S
Sir I can't update my phone and when I flash RUU Rom I have this message :
sending 'zip' (252201 KB)...
OKAY [ 42.530s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 51.866s
Any Ideas
talal_zaki said:
I have HTC Incredible S, which i update it to the last version 3.08 with HBOOT 2.00.000, I tried to change its CID after downgrading the Main version and i got my phone bricked... So i took it to a store to fix it and they run it alive again... I have the handset now S-OFF with HBOOT 1.13.0000 and android version 2.3.3 and when i try to check for updates it gives me that no updates are available although the update is available to android version 3.08....
What Can I do please help to get my device takes updates again???
Click to expand...
Click to collapse
Did you see what the store did to you phone to "run it alive again"?
talal_zaki said:
Sir I can't update my phone and when I flash RUU Rom I have this message :
sending 'zip' (252201 KB)...
OKAY [ 42.530s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 51.866s
Any Ideas
Click to expand...
Click to collapse
Model ID check indicates that you are attempting to flash a RUU that is not meant for your device. Which RUU/ROM.zip are you trying to flash?
Can you get into FASTBOOT USB mode and enter the following command and post your results:
fastboot getvar all
They RIFF BOX it again coz it was dead...
INFOversion: 0.5
INFOversion-bootloader: 6.13.9999
INFOversion-baseband: 3805.06.03.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.30.415.1
INFOserialno: HT131TD07312
INFOimei: 355301043098113
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3212***
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4024mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-8a731c6e
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: -0.000s
talal_zaki said:
INFOversion: 0.5
INFOversion-bootloader: 6.13.9999
INFOversion-baseband: 3805.06.03.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.30.415.1
INFOserialno: HT131TD07312
INFOimei: 355301043098113
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3212***
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4024mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-8a731c6e
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: -0.000s
Click to expand...
Click to collapse
There's something VERY wrong with your modelid. I would recommend flashing a custom rom if you need your phone in a hurry.
Go back to the guy who riffed your phone, he's put the wrong model ID on it. That's for the Canadian Bell mobile if i'm not mistaken
is there something i can do to get back my phone again without going to the guy who riffed my phone???
talal_zaki said:
is there something i can do to get back my phone again without going to the guy who riffed my phone???
Click to expand...
Click to collapse
I'm quite certain there is not a way to change the modelid through adb or fastboot. If you really want to flash RUU rom, which is the impression I get as you have disregarded on more than one occasion to flash a custom rom, then you will have to copy the rom.zip from the temp directory when you start up the ruu program, extract the android-info.txt, edit the modelid: PG3213000 to modelid: PG3212000, add back to the rom.zip, rename the rom.zip to PG32IMG.zip, copy it to your sdcard, restart your phone in hboot mode and install it that way.
Keeping in mind that you will have to do these steps every time you wish to flash a new stock rom, going back to the vendor or flashing a custom rom seems easier IMO
will try in a few hours, after work hope it will work.
talal_zaki said:
is there something i can do to get back my phone again without going to the guy who riffed my phone???
Click to expand...
Click to collapse
Nonverbose said:
I'm quite certain there is not a way to change the modelid through adb or fastboot. If you really want to flash RUU rom, which is the impression I get as you have disregarded on more than one occasion to flash a custom rom, then you will have to copy the rom.zip from the temp directory when you start up the ruu program, extract the android-info.txt, edit the modelid: PG3213000 to modelid: PG3212000, add back to the rom.zip, rename the rom.zip to PG32IMG.zip, copy it to your sdcard, restart your phone in hboot mode and install it that way.
Keeping in mind that you will have to do these steps every time you wish to flash a new stock rom, going back to the vendor or flashing a custom rom seems easier IMO
Click to expand...
Click to collapse
From the looks of your getvar values, you currently have S-OFF at this point, too, so modifying the android-info.txt file inside a PG32IMG.zip file will definitely allow you to flash a RUU even though your modelid is PG3212***
Dear Sir I ca not flash RUU, I have the same problem always (modelid)...
tpbklake said:
From the looks of your getvar values, you currently have S-OFF at this point, too, so modifying the android-info.txt file inside a PG32IMG.zip file will definitely allow you to flash a RUU even though your modelid is PG3212***
Click to expand...
Click to collapse
talal_zaki said:
Dear Sir I ca not flash RUU, I have the same problem always (modelid)...
Click to expand...
Click to collapse
You need to extract the ROM.zip from the RUU and then you can edit the android-info.txt file in the ROM.zip and add modelid = PG3212*** to the this file.
Then copy the ROM.zip file to your sd card and name it PG32IMG.zip. That will allow you to flash the via the bootloader.
Can I Format the Phone to change its model ID??
The Model ID still the same, 3212*** i want to change it to 3213*** Please help coz all of these steps wont work, I asked the shop who repaired my Incredible S and he said that he made a permanant S-OFF with XTC Clip....
talal_zaki said:
The Model ID still the same, 3212*** i want to change it to 3213*** Please help coz all of these steps wont work, I asked the shop who repaired my Incredible S and he said that he made a permanant S-OFF with XTC Clip....
Click to expand...
Click to collapse
It is good that you are S-OFF with XTC Clip, however, you cannot change the modelid on the phone.
You need to modify the android-info.txt file in the PG32IMG.zip file on the SD card to allow it to flash on your PG3212000. That is how you are going to get the rom reflashed.
I changed the model ID from PG3212*** to PG3213*** and installed a RUU rom but it stills not taking updates (any ideas)
talal_zaki said:
I changed the model ID from PG3212*** to PG3213*** and installed a RUU rom but it stills not taking updates (any ideas)
Click to expand...
Click to collapse
Can we see a new getvar output. State what ruu you installed,if it succeeded,and what you want it to do next. Try to be as clear and complete as possible to help us understand how to advise you.
INFOversion: 0.5
INFOversion-bootloader: 2.00.0000
INFOversion-baseband: 3822.10.08.28_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.08.405.3
INFOserialno: HT131TD07312
INFOimei: 355301043098113
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3213***
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3867mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-af9874be
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: -0.000s
I tried RUU roms RUU_VIVO_ARA_2.3.3>>> (no updates)
I tried RUU_VIVO_ARA_1.42 (NO Updates)
I tried RUU_VIVO_ARA_2.12 (NO updates)...
Finally I Installed RUU_VIVO_SENSE3.0... (NO Updates)
even I put some OTA files on the memory card but the phone wont install or see them
You're on gb 2.3.5 with sense3.0 what exactly do you believe you can update to?
Related
I'm having a problem flashing the latest firmware - 4.19.401.11 (currently on 4.19.401.8).
I get:
Code:
sending 'zip' (71868 KB)...
OKAY [ 4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
I then try to write again immediately and it just hangs on
Code:
sending 'zip' (71868 KB)...
(the file size is obviously different I just copied the code from Vomer's thread).
Eventually I have to just reset my phone. Any ideas?
I've never had any problems flashing firmware in the past.
I have checked the MD5 (it matches), i've tried downloading it again and tried on different PCS (both running Windows 7) with different USB cables.
Currently running Viperone 5.8.0
Thanks in advance.
Any ideas?
How are you trying to flash the firmware?
Post link to firmware please.
Post a fastboot getvar all
Sent from my Nexus 7 using XDA Premium 4 mobile app
Hi there,
I'm using the guide that Vomer has posted and the latest firmware on the following page (I have followed this process many times):
http://forum.xda-developers.com/showthread.php?t=2365506
My getvar:
Code:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4228mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
Thanks!
Ardmanz said:
Hi there,
I'm using the guide that Vomer has posted and the latest firmware on the following page (I have followed this process many times):
http://forum.xda-developers.com/showthread.php?t=2365506
My getvar:
Code:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
[COLOR="Red"]INFOproduct: m7_ul[/COLOR]
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4228mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
Thanks!
Click to expand...
Click to collapse
You do realise that is for HTC HTC One Dual Sim(M7C_DUG) You have a m7ul single sim.
Get the firmware from here and follow the guide
No need to lock your bootloader,{ your S-Off }
http://forum.xda-developers.com/showthread.php?t=2182823
The version is exactly the same as the one you have linked me to?
Vomer has never posted up dualsim firmwares before?
Here is the link to the specific firmware I am trying to use:
http://www.androidfilehost.com/?fid=23329332407579996
Ardmanz said:
The version is exactly the same as the one you have linked me to?
Vomer has never posted up dualsim firmwares before?
Here is the link to the specific firmware I am trying to use:
http://www.androidfilehost.com/?fid=23329332407579996
Click to expand...
Click to collapse
Read underneath fw_4.19.401.11_custom.zip
for the HTC HTC One Dual Sim(M7C_DUG), by vomer
DUEL SIM
You need this one
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
bored_stupid said:
Read underneath fw_4.19.401.11_custom.zip
for the HTC HTC One Dual Sim(M7C_DUG), by vomer
DUEL SIM
You need this one
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
Click to expand...
Click to collapse
Wow, I missed that. I feel like an idiot! Haha.
I'll try the one you posted. Thank you very much!
Let me know how you get on
Dont feel to bad, I almost download that at one time too
bored_stupid said:
Let me know how you get on
Dont feel to bad, I almost download that at one time too
Click to expand...
Click to collapse
Hmm, same thing again.
I've noticed something weird in my HBOOT though..
It's in red text:
OS-4.19.401.8 (4.19.401.11)
Does this have anything to do with it?
Edit - I've also tried the .9 firmware and it's giving me the same problem however, the red message above now has the .9 firmware in brackets???
Edit - Also, my phone works fine, I just can't flash any firmwares.
Ardmanz said:
Hmm, same thing again.
I've noticed something weird in my HBOOT though..
It's in red text:
OS-4.19.401.8 (4.19.401.11)
Does this have anything to do with it?
Click to expand...
Click to collapse
Because you only ran the "fastboot flash zip <name of firmware>.zip" once, your firmware is in a state of limbo.
Flash the firmware again
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your firmware.zip file is in your adb/fastboot folder
fastboot flash zip firmware.zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
fastboot flash zip firmware.zip
Let it run and it should finish this time
fastboot reboot
bored_stupid said:
Because you only ran the "fastboot flash zip <name of firmware>.zip" once, your firmware is in a state of limbo.
Flash the firmware again
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your firmware.zip file is in your adb/fastboot folder
fastboot flash zip firmware.zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
fastboot flash zip firmware.zip
Let it run and it should finish this time
fastboot reboot
Click to expand...
Click to collapse
The above is exactly what I'm doing. I flash the second time but it does nothing. Maybe I'll leave it longer but it's never taken more than about 30 seconds to send it to my phone previously. I'll leave it for a good 5 mins and see how I go.
Ardmanz said:
The above is exactly what I'm doing. I flash the second time but it does nothing. Maybe I'll leave it longer but it's never taken more than about 30 seconds to send it to my phone previously. I'll leave it for a good 5 mins and see how I go.
Click to expand...
Click to collapse
Flash 1.44 hboot firmware
http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
See if that works
if it does then you can reflash the latest firmware
bored_stupid said:
Flash 1.44 hboot firmware
http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
See if that works
if it does then you can reflash the latest firmware
Click to expand...
Click to collapse
Flash that as I would the normal firmware then try flashing the newest firmware?
Ardmanz said:
Flash that as I would the normal firmware then try flashing the newest firmware?
Click to expand...
Click to collapse
Yes flash as normal firmware
You might be interested in this though
I have Hboot 1.44 and latest radio firmware
The radio is flashed in recovery
http://d-h.st/7ci
bored_stupid said:
Yes flash as normal firmware
You might be interested in this though
I have Hboot 1.44 and latest radio firmware
The radio is flashed in recovery
http://d-h.st/7ci
Click to expand...
Click to collapse
Would I be safer using an RUU then flashing the latest firmware?
Ardmanz said:
Would I be safer using an RUU then flashing the latest firmware?
Click to expand...
Click to collapse
Any flashing to a phone involves risks
This is the main thread to the flashable radios i refereed too
http://forum.xda-developers.com/showthread.php?t=2419699
bored_stupid said:
Any flashing to a phone involves risks
This is the main thread to the flashable radios i refereed too
http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
I realise the risk but RUU is like starting from fresh. May give it a go, it's a pain though!
Ardmanz said:
I realise the risk but RUU is like starting from fresh. May give it a go, it's a pain though!
Click to expand...
Click to collapse
I think it maybe your only hope if the hboots wont take.
Its just that some users have had some luck by flashing 1.44 hboot
I just hope that trying to flash the wrong firmware hasn't corrupted the hboot.
Backup your user apps with TB
Also if your using 4.4.2 RUU then dont sign into google when setting up the phone.
Once setup has finished then sign into Google.
Your notifications will work then.
bored_stupid said:
I think it maybe your only hope if the hboots wont take.
Its just that some users have had some luck by flashing 1.44 hboot
I just hope that trying to flash the wrong firmware hasn't corrupted the hboot.
Backup your user apps with TB
Also if your using 4.4.2 RUU then dont sign into google when setting up the phone.
Once setup has finished then sign into Google.
Your notifications will work then.
Click to expand...
Click to collapse
I was planning on using this one:
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Hello guys,
I bought a shiny new M8 and wanted to sell my M7 now. Problem: I can't for the heck of it figure out how to revert back to stock. I was on ARHD all the time.
First of all, my getvar all. I was S-OFF.
F:\fastboot>fastboot getvar all
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.19.3263.13
version-cpld: None
version-microp: None
version-main: 3.09.401.1
version-misc: PVT SHIP S-OFF
serialno: SH35JWxxxxx
imei: 354436056xxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4279mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f361905d64
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.064s
Click to expand...
Click to collapse
I already relocked the bootloader as I understood that it needs to be relocked to install an official RUU. So far so good.
I downloaded the latest RUU (RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_R adio_4A.23.3263.28_10.38r.1157.04L_release_353069_ signed_2-1.exe) and it just gets stuck at Checking Header and 5%.
I googled a bit and found this thread here where it is suggested to use m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed and then OTA all the way up. Well, this RUU won't even begin the update process as it says that this RUU is incompatible, right before the flash should start.
I even tried extracting the Rom.zip out the latest RUU and flashing it manually, this is what I get:
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 80250270 is not a multiple of th
e block size 4096
sending sparse 'zip' (1490936 KB)...
error: write_sparse_skip_chunk: don't care size 80250270 is not a multiple of th
e block size 4096
error: write_sparse_skip_chunk: don't care size 80250270 is not a multiple of th
e block size 4096
OKAY [ 67.418s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 67.608s
Click to expand...
Click to collapse
Can anyone point me in the right direction here? I don't really know what else to try.
fBx said:
Hello guys,
I bought a shiny new M8 and wanted to sell my M7 now. Problem: I can't for the heck of it figure out how to revert back to stock. I was on ARHD all the time.
First of all, my getvar all. I was S-OFF.
I already relocked the bootloader as I understood that it needs to be relocked to install an official RUU. So far so good.
I downloaded the latest RUU (RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_R adio_4A.23.3263.28_10.38r.1157.04L_release_353069_ signed_2-1.exe) and it just gets stuck at Checking Header and 5%.
I googled a bit and found this thread here where it is suggested to use m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed and then OTA all the way up. Well, this RUU won't even begin the update process as it says that this RUU is incompatible, right before the flash should start.
I even tried extracting the Rom.zip out the latest RUU and flashing it manually, this is what I get:
Can anyone point me in the right direction here? I don't really know what else to try.
Click to expand...
Click to collapse
you already have a thread here: http://forum.xda-developers.com/showthread.php?t=2796167 for the same issue. why a 2nd one?
btw you don't need to relock bootloader to flash ruu when the phone is s-off.
Would it work to flash a nandroid backup of an original german unbranded phone via CWM?
fBx said:
Hello guys,
I bought a shiny new M8 and wanted to sell my M7 now. Problem: I can't for the heck of it figure out how to revert back to stock. I was on ARHD all the time.
First of all, my getvar all. I was S-OFF.
I already relocked the bootloader as I understood that it needs to be relocked to install an official RUU. So far so good.
I downloaded the latest RUU (RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_R adio_4A.23.3263.28_10.38r.1157.04L_release_353069_ signed_2-1.exe) and it just gets stuck at Checking Header and 5%.
I googled a bit and found this thread here where it is suggested to use m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed and then OTA all the way up. Well, this RUU won't even begin the update process as it says that this RUU is incompatible, right before the flash should start.
I even tried extracting the Rom.zip out the latest RUU and flashing it manually, this is what I get:
Can anyone point me in the right direction here? I don't really know what else to try.
Click to expand...
Click to collapse
I have the same problem, How did you fix?
maxwilliam100 said:
I have the same problem, How did you fix?
Click to expand...
Click to collapse
try to flash the firmware first
alray said:
try to flash the firmware first
Click to expand...
Click to collapse
Thanks for the tip @alray
I'm downloading the firmware and will defenately follow directions form this link
trjlive (dot) com/guide-install-firmware-htc-one-m7/
In the meantime here is the info from my phone
HTML:
version: 0.5
version-bootloader: 1.55.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: xxxxxxxx
imei: xxxxxxxxxxxxxxxx
meid: 99000146508682
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: 11111111
battery-status: good
battery-voltage: 3947mV
partition-layout: Generic
ecurity: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-371c4f408e
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.072s
maxwilliam100 said:
Thanks for the tip @alray
I'm downloading the firmware and will defenately follow directions form this link
trjlive (dot) com/guide-install-firmware-htc-one-m7/
In the meantime here is the info from my phone
HTML:
version: 0.5
version-bootloader: 1.55.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: 11111111
battery-status: good
battery-voltage: 3947mV
partition-layout: Generic
ecurity: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-371c4f408e
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.072s
Click to expand...
Click to collapse
Wait, you have a sprint phone? Hope you ar enot trying to flash this 4.19.401.9 ruu for GSM phones?
Btw you have s-off, you can use every ruu intended for sprint variant m7wls (x.xx.651.x RUU). Do not attempt to flash ruu for GSM variants. You should also set back your cid to its original value (SPCS_001).
And remove your S/N, IMEI and MEID numbers from your above post, these are sensitive data you want to keep for yourself.
alray said:
Wait, you have a sprint phone? Hope you ar enot trying to flash this 4.19.401.9 ruu for GSM phones?
Btw you have s-off, you can use every ruu intended for sprint variant m7wls (x.xx.651.x RUU). Do not attempt to flash ruu for GSM variants. You should also set back your cid to its original value (SPCS_001).
And remove your S/N, IMEI and MEID numbers from your above post, these are sensitive data you want to keep for yourself.
Click to expand...
Click to collapse
I'm not sure if this is sprint, its not branded anywhere(See attached images). The download is completed, Should i proceed from the link i provided? @alray
Excuse i cannot attache the images directly here because i'm a new user, please see the links below to see how the phone looks like.
i.imgur.com/6kzhlUS.jpg
i.imgur.com/mMDQ6uZ.jpg
maxwilliam100 said:
I'm not sure if this is sprint, its not branded anywhere(See attached images). The download is completed, Should i proceed from the link i provided? @alray
Excuse i cannot attache the images directly here because i'm a new user, please see the links below to see how the phone looks like.
i.imgur.com/6kzhlUS.jpg
i.imgur.com/mMDQ6uZ.jpg
Click to expand...
Click to collapse
your fastboot getvar and bootloader revels you have a Sprint phone .. Use Only Sprint Files
http://forum.xda-developers.com/sprint-htc-one
maxwilliam100 said:
I'm not sure if this is sprint, its not branded anywhere(See attached images). The download is completed, Should i proceed from the link i provided? @alray
Excuse i cannot attache the images directly here because i'm a new user, please see the links below to see how the phone looks like.
i.imgur.com/6kzhlUS.jpg
i.imgur.com/mMDQ6uZ.jpg
Click to expand...
Click to collapse
M7_WLS = Sprint = CDMA phone = different partition table = flash a ruu not for sprint and you'll end with a bricked phone.
use a x.xx.651.x ruu for cid SPCS_001 and mid PN0720000 only
http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
and do not use windows 8 to flash it or you'll be stuck
use windows 7, MacOs or linux.
alray said:
M7_WLS = Sprint = CDMA phone = different partition table = flash a ruu not for sprint and you'll end with a bricked phone.
use a x.xx.651.x ruu for cid SPCS_001 and mid PN0720000 only
http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
and do not use windows 8 to flash it or you'll be stuck
use windows 7, MacOs or linux.
Click to expand...
Click to collapse
@maxwilliam100
theirs also
Sprint 4.xx RUU
https://www.androidfilehost.com/?fid=23329332407573774
Sprint 5.xx RUU
http://forum.xda-developers.com/showthread.php?t=2795856
Thank you very much @alray and @clsA
I'm now downloading this ruu and since its at zip then i think i will have to rename the zip file to ruu.zip and flash from
fastboot oem rebootRUU
fastboot flash zip ruu.zip
Click to expand...
Click to collapse
Is there anything else that i should be aware of?
maxwilliam100 said:
Thank you very much @alray and @clsA
I'm now downloading this ruu and since its at zip then i think i will have to rename the zip file to ruu.zip and flash from
Is there anything else that i should be aware of?
Click to expand...
Click to collapse
you may have to do the fastboot flash zip ruu.zip 2 times
clsA said:
you may have to do the fastboot flash zip ruu.zip 2 times
Click to expand...
Click to collapse
Thanks Guys,
After three weeks of googling every available thing and failure, i came here as my last hope... PM random people on the internet and youtube..... without any success
Many thanks to @alray and @clsA
:highfive:
Hi,
I`ve had my fun tuning my htc one, but i`ve no clue how to get it to normal m7 phone with sense 6 lol.
I`ve got TWRP and running the OTA rom does not do anything. Am I trying with the incorrect rom or what?
Thanks for any feedback!
sycorax1337 said:
Hi,
I`ve had my fun tuning my htc one, but i`ve no clue how to get it to normal m7 phone with sense 6 lol.
I`ve got TWRP and running the OTA rom does not do anything. Am I trying with the incorrect rom or what?
Thanks for any feedback!
Click to expand...
Click to collapse
First, we will need to see a fastboot getvar all with the imei and serialno removed. This is needed to know which variant/version of the HTC One M7 you have, so we can point you in the right direction.
Second, OTA's are update files for stock roms with stock recovery for specific versions. If you don't have the correct combination then it will not run properly.
Third, here is a guide for going back to stock. You probably don't want to go to 100% stock but it shows you the proper steps.
majmoz said:
First, we will need to see a fastboot getvar all with the imei and serialno removed. This is needed to know which variant/version of the HTC One M7 you have, so we can point you in the right direction.
Second, OTA's are update files for stock roms with stock recovery for specific versions. If you don't have the correct combination then it will not run properly.
Third, here is a guide for going back to stock. You probably don't want to go to 100% stock but it shows you the proper steps.
Click to expand...
Click to collapse
Sorry, my bad
Code:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: H3G__001
battery-status: good
battery-voltage: 4273mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-1f512bb6
hbootpreupdate: 11
gencheckpt: 0
sycorax1337 said:
Sorry, my bad
Code:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: H3G__001
battery-status: good
battery-voltage: 4273mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-1f512bb6
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
I can not find a RUU for your phone but I did find a GURU Stock Reset: http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
Guru Reset file are simply Stock ROM’s packaged with the nice graphical interface of the aroma installer. They include the stock radio and stock recovery, so if you are still S-on then this is best way to reset to stock. It can’t change your firmware but it can get the stock ROM installed with the stock recovery so that you can get OTA updates and it should also remove the Tampered text from your bootloader.
Click to expand...
Click to collapse
There is an OTA at this site for your phone.
I would try to get S-OFF before doing the Stock Reset it would give you more flexibility. If firewater doesn't work to get S-OFF then view this post about a service in the UK.
majmoz said:
I can not find a RUU for your phone but I did find a GURU Stock Reset: http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
There is an OTA at this site for your phone.
I would try to get S-OFF before doing the Stock Reset it would give you more flexibility. If firewater doesn't work to get S-OFF then view this post about a service in the UK.
Click to expand...
Click to collapse
After installing that GURU stock reset, and updating to sense 5.5, the phone stuck in a reboot loop.
I can get to TWRP within recovery, but I cant push any ROM to the phone so I can use it. Tried the push command, in fastboot mode and command prompt prints message device not found. What am I missing?
sycorax1337 said:
After installing that GURU stock reset, and updating to sense 5.5, the phone stuck in a reboot loop.
I can get to TWRP within recovery, but I cant push any ROM to the phone so I can use it. Tried the push command, in fastboot mode and command prompt prints message device not found. What am I missing?
Click to expand...
Click to collapse
Try the sideload method. Make sure HTC Drivers are installed and ADB is already working. If not, then check out this FAQ Post.
1. Reboot into TWRP
2. In TWRP, hit ADVANCED and find SIDELOAD
3. Swipe to start the SIDELOAD
4. Open a CMD Prompt window and Change Directories to where your adb.exe is
5. Type adb devices and it should show your device connected and say SIDELOAD
6. Your ZIP file should already be in your adb folder
7. You are now ready to push the zip.....
8. Type adb sideload nameofzip.zip
9. Wait until it says 100% and reboot back into recovery to flash the ROM
10. If hitting power does not make the screen come one, type adb reboot recovery
11. If adb reboot recovery does not work, hold power and volume down until it reboots to fastboot then go to recovery
sycorax1337 said:
After installing that GURU stock reset, and updating to sense 5.5, the phone stuck in a reboot loop.
I can get to TWRP within recovery, but I cant push any ROM to the phone so I can use it. Tried the push command, in fastboot mode and command prompt prints message device not found. What am I missing?
Click to expand...
Click to collapse
You can't use that guru reset file, it's too low for your hboot version, the only way you can use it is to downgrade your hboot and the only way you can do that is to get s-off, the otas are putting you into a bootloop because they are trying to upgrade your hboot and as you already have the latest hboot they can't complete that task.
Your stuck with custom roms unless you can get your phone s-off, or find a nandroid backup of your latest rom.
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
as for your driver problem, see FAQ 2 here by nkk71 http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Mate I have same problem like you. No way to bring a phone to life. I try a custom and lot of ruu, but nothing with some ruu i got error 155, and 130. With CyanogenMod, using sideload i got error on the phone, and nothing instal.
Hire is my getvar all.
Code:
C:\ADB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.00
INFOversion-baseband: 4T.27.321
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-OF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4331mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-e47fb74b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.069s
C:\ADB>
People help us to get alive our phones...
Errornt said:
Mate I have same problem like you. No way to bring a phone to life. I try a custom and lot of ruu, but nothing with some ruu i got error 155, and 130. With CyanogenMod, using sideload i got error on the phone, and nothing instal.
Hire is my getvar all.
Code:
C:\ADB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.00
INFOversion-baseband: 4T.27.321
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-OF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4331mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-e47fb74b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.069s
C:\ADB>
People help us to get alive our phones...
Click to expand...
Click to collapse
First, remove the imei and serialno from your original post!
Second, I have had problems running RUU because the hboot was too high. Since, you are S-OFF you can downgrade your hboot then install the RUU. This post will explain the procedure. When the RUU executes it will change your hboot to that of the RUU.
Ok thx mate, I downgrade my Hboot to 1.44.000. Here is log.
Code:
C:\ADB>fastboot flash zip 1.29.401.12_hboot_1.44.zip
sending 'zip' (501 KB)... OKAY [ 0.261s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping & flushing...
INFO[RUU]UZ,hboot,0
INFO[RUU]UZ,hboot,50
INFO[RUU]UZ,hboot,100
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,99
INFO[RUU]WP,hboot,100
INFO...... Successful
OKAY [ 2.339s]
finished. total time: 2.602s
C:\ADB>
Then I try flash firmware above in this theard, and got faill in CMD, hire is log.
Code:
C:\ADB>fastboot flash zip C:\adb\firmware.zip
sending 'zip' (733251 KB)... OKAY [ 48.690s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 55.696s
C:\ADB>fastboot flash zip C:\adb\firmware.zip
sending 'zip' (733251 KB)... OKAY [ 48.494s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 55.753s
C:\ADB>fastboot flash zip C:\adb\firmware.zip
sending 'zip' (733251 KB)... OKAY [ 66.921s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 74.199s
Is it possible to my eMMC-boot is death. There is no size text. Look @ picture.
After i flash a new HBOOT text has gone 2048MB
Did you put your phone into ruu mode before trying to flash the firmware ?
Code:
fastboot oem rebootRUU
Seanie280672 said:
Did you put your phone into ruu mode before trying to flash the firmware ?
Code:
fastboot oem rebootRUU
Click to expand...
Click to collapse
Yes mate, the black screen with HTC text.
Can somebody tell me what region is my phone, i buy it from internet and I dont know what RUU to download, to try flash it.
Errornt said:
Yes mate, the black screen with HTC text.
Can somebody tell me what region is my phone, i buy it from internet and I dont know what RUU to download, to try flash it.
Click to expand...
Click to collapse
Well your on 401 which is WWE Europe, same as the hboot you flashed, so you need to flash an ruu or a firmware which is 4.xx.401.xx however I see what your problem is, you have super cid, 401 android-info.txt doesn't have super cid in it, change your cid to HTC__001 then reboot bootloader and try flash the firmware zip again.
Seanie280672 said:
Well your on 401 which is WWE Europe, same as the hboot you flashed, so you need to flash an ruu or a firmware which is 4.xx.401.xx however I see what your problem is, you have super cid, 401 android-info.txt doesn't have super cid in it, change your cid to HTC__001 then reboot bootloader and try flash the firmware zip again.
Click to expand...
Click to collapse
Ok so i need to change my cid to HTC__001 and then flash Some WWE Europe RUU, can you give me a link of some ruu that you thing its good for me. (thx).
Sorry for my bad English.
Edit: I edited my CID to HTC__001 so now I need good RUU to flash it. I woud like to have a orginal rom, but i will be happy if I get my phone on with any custom rom if not with oem.
Errornt said:
Ok so i need to change my cid to HTC__001 and then flash Some WWE Europe RUU, can you give me a link of some ruu that you thing its good for me. (thx).
Sorry for my bad English.
Click to expand...
Click to collapse
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
You may need to find the 4.19.401.9 firmware and flash that first.
I got ERROR 158 IMAGE ERROR, when i try to flash this RUU.
My radio is 4T, and this RUU is 4A is that problem?
Errornt said:
I got ERROR 158 IMAGE ERROR, when i try to flash this RUU.
My radio is 4T, and this RUU is 4A is that problem?
Click to expand...
Click to collapse
Nope, you need to find the corrisponding firmware and flash that first like I said before , you need 4.19.401.9 firmware.zip, flash that first then run the ruu
Seanie280672 said:
Nope, you need to find the corrisponding firmware and flash that first like I said before , you need 4.19.401.9 firmware.zip, flash that first then run the ruu
Click to expand...
Click to collapse
Can you give me more details how to make that to flash 4.19.401.9 firmware.zip, and how to flash it, with cmd? fastboot? Should be unlocked or relocked? when flashing that firmware, and can you help me to find that firmware on the net, because i dont know what i need to search. :angel:
Errornt said:
Can you give me more details how to make that to flash 4.19.401.9 firmware.zip, and how to flash it, with cmd? fastboot? Should be unlocked or relocked? when flashing that firmware, and can you help me to find that firmware on the net, because i dont know what i need to search. :angel:
Click to expand...
Click to collapse
You will have to wait till I get home from work in a few hours for all of that or do a bit of reading and searching
what firmware are you after?
hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:
Steel-Cleiton said:
hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:
Click to expand...
Click to collapse
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.
alray said:
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.
Click to expand...
Click to collapse
thanks for your response man
I edited and the first post as requested
I now understand that I can not go back to version 599 stock
if I use another CID / MID will be able to receive OTA updates in the future?
anyway I can not go back to version 599, I will have to use another stock like you said
you could teach me how to make changes, to use another version rom stock?
sorry for bad English
Steel-Cleiton said:
if I use another CID / MID will be able to receive OTA updates in the future?
Click to expand...
Click to collapse
Yes
you could teach me how to make changes, to use another version rom stock?
Click to expand...
Click to collapse
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.
alray said:
Yes
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.
Click to expand...
Click to collapse
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english
Steel-Cleiton said:
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english
Click to expand...
Click to collapse
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.
alray said:
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.
Click to expand...
Click to collapse
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators
Steel-Cleiton said:
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
Click to expand...
Click to collapse
Flash a stock rom!
this one should work fine
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators
Click to expand...
Click to collapse
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.
alray said:
Flash a stock rom!
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.
Click to expand...
Click to collapse
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me
Steel-Cleiton said:
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me
Click to expand...
Click to collapse
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
I'll try when I get home
I'm at work now, get out of here one hour
thanks a lot:good:
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience
Steel-Cleiton said:
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience
Click to expand...
Click to collapse
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.
majmoz said:
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.
Click to expand...
Click to collapse
yes I did all the steps
not only posted yesterday because it was late
Alray was my master
I owe much to him
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?
Steel-Cleiton said:
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?
Click to expand...
Click to collapse
Yes its all good, glad it worked :good:
alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I know not how to thank you
I admire your dedication and patience
I will continue to follow this forum
I have a lot to learn here
thanks again Alray
alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I have just received OTA lollipop
thank you again
so I pay my credit card, I will make a donation to you friend
I need some help, my phone has the same software number.
I tried to change the MID using this post as reference: http://forum.xda-developers.com/showthread.php?t=2322820
I get the gray screen, but when I try to run the RUU software I'm having error 170, phone is not connected.
The software just ask me to press finish to close the program, and don't install the rom.
How to solve this error 170?
Hi guys, i ussually don't play too much with flashing and stuff, but i was bored and i tried to convert my htc from sprint to GPE, because i am S-OFF, bootloader unlocked and SuperCID, everything seemed to be fine till the flashing via hboot finished and the phone rebooted, but then the problem begun, after the phone started to reboot and the google logo appeared it imediately launchs the hboot but quite different of htc's original white hboot, this time it was black i assume that's because of the gpe conversion, well thats what it does im stuck there, the phone wont work with adb, just with fastboot and i can get it to ruu mode, then i flashed twrp to try installing a rom and did a wipe before installing it but no luck just loads de google logo screen and then it sends me again to hboot, then i tried to run the latest RUU exe from sprints htc page from the RUU mode and it starts but stops when reaches "Checking Header" and throws error 155 then i google that and some pages said i had to relock the bootloader and i did it but no luck again, then i tried to flash it via fastboot and again starts fine but then "remote 32 header" error appeared and it wont let me install the RUU to go back on Sense 6, i dont know what to do now, im desperate, i wanna save my phone i need help guys! Please!.
Did you happen to change the MID during the GPE conversion?
Sloth said:
Did you happen to change the MID during the GPE conversion?
Click to expand...
Click to collapse
Yes i did, i've already thinked that it might be a cause, and i didn't change it again to sprint version but i can't access adb to do it, only fastboot and ruu, is there a way to change it by one of these two methods to try ?
robgaleano said:
Yes i did, i've already thinked that it might be a cause, and i didn't change it again to sprint version but i can't access adb to do it, only fastboot and ruu, is there a way to change it by one of these two methods to try ?
Click to expand...
Click to collapse
You will probably need to unlock your bootloader again > re-flash twrp...then you will have access to adb.
Sloth said:
You will probably need to unlock your bootloader again > re-flash twrp...then you will have access to adb.
Click to expand...
Click to collapse
From where do i try to access adb?? from twrp, hboot or ruu mode?? im trying with a tool i found to change MID, then i will try again to flash ruu, if that doesn't work i'll report here. Thanks for all dude
robgaleano said:
From where do i try to access adb?? from twrp, hboot or ruu mode?? im trying with a tool i found to change MID, then i will try again to flash ruu, if that doesn't work i'll report here. Thanks for all dude
Click to expand...
Click to collapse
ADB works in twrp.
Are you looking here to change your MID?
http://forum.xda-developers.com/showthread.php?t=2708581
Sloth said:
ADB works in twrp.
Are you looking here to change your MID?
http://forum.xda-developers.com/showthread.php?t=2708581
Click to expand...
Click to collapse
Already changed the MID, then went to RUU Mode and tried again the flash of the RUU but says this
fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1540249 KB)...
OKAY [ 43.003s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 43.181s
robgaleano said:
Already changed the MID, then went to RUU Mode and tried again the flash of the RUU but says this
fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1540249 KB)...
OKAY [ 43.003s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 43.181s
Click to expand...
Click to collapse
Have you tried using the exe RUU?
Sloth said:
Have you tried using the exe RUU?
Click to expand...
Click to collapse
Tried to update via hboot and got this ¨ Pasing.. Device Halted due to large Image update fail! ¨ never said that before when i installed an RUU via hboot, i will try with the RUU exe and see what happens
Sloth said:
Have you tried using the exe RUU?
Click to expand...
Click to collapse
Also tried RUU exe update already, still no luck, it gets stuck on checking header on 0% of the progress bar an then it quits and shows ERROR[155] IMAGE UPDATE ERROR. Any ideas "/ ??
robgaleano said:
Also tried RUU exe update already, still no luck, it gets stuck on checking header on 0% of the progress bar an then it quits and shows ERROR[155] IMAGE UPDATE ERROR. Any ideas "/ ??
Click to expand...
Click to collapse
You might need to flash the Full firmware first...the last few updates require the hboots to match with FW and RUU.
Sloth said:
You might need to flash the Full firmware first...the last few updates require the hboots to match with FW and RUU.
Click to expand...
Click to collapse
never done that before, how do i do that?? and also the gpe conversion have changed my radio, is that a problem too??
robgaleano said:
never done that before, how do i do that?? and also the gpe conversion have changed my radio, is that a problem too??
Click to expand...
Click to collapse
The instructions are in the RUU/Firmware thread...flashing the FW will flash the correct radio.
Sloth said:
You might need to flash the Full firmware first...the last few updates require the hboots to match with FW and RUU.
Click to expand...
Click to collapse
Ok thanks, goona try flashing firmware, after that do i try to update on RUU again??
Sloth said:
The instructions are in the RUU/Firmware thread...flashing the FW will flash the correct radio.
Click to expand...
Click to collapse
Dude you dont know how happy i am hahahaha, after flashing the firmware, i installed with RUU exe and i finally have phone again. Thank you so much!!
robgaleano said:
Dude you dont know how happy i am hahahaha, after flashing the firmware, i installed with RUU exe and i finally have phone again. Thank you so much!!
Click to expand...
Click to collapse
Nice congrats.
Now stay away from GPE lol.
There are 2 Sprint compatible GPE roms that are available, 1 is in the Sprint Android Development section and the other is a Multi Carrier in the Verizon Android Development section.
Sloth said:
You might need to flash the Full firmware first...the last few updates require the hboots to match with FW and RUU.
Click to expand...
Click to collapse
Damn, you are a life saver.
help me please
2months her that I try to solve the problem of my phone, I try everything, still nothing,i have htc one m8 sprint
r) version: 0.5
r) version-bootloader: 3.19.0.0000
r) version-baseband: 1.09.20.1112
r) version-cpld: None
r) version-microp: None
r) version-main: 6.20.651.3
r) version-misc: PVT SHIP S-OFF
r) serialno: Mod Edit
r) imei: Mod Edit
r) imei2: Not Support
r) meid: Mod Edit
r) product: m8_whl
r) platform: hTCBmsm8974
r) modelid: 0P6B70000
r) cidnum: 11111111
r) battery-status: good
r) battery-voltage: 0mV
r) partition-layout: Generic
r) security: off
r) build-mode: SHIP
r) boot-mode: FASTBOOT
r) commitno-bootloader: 205bdca3
r) hbootpreupdate: 11
r) gencheckpt: 0
total time: 0.078s
I board try with all these RUU, but my phone NOT START I turn on my phone, 2 seconds, turns itself off
RUU_M8_WHL_K444_SENSE60_SPCS_MR_Sprint_WWE_3.30.651.2_R_Radio_1.08.20.0916_NV_SPCS_1.52_003_release_395172_signed_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426232_signed_2
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3_2
everything I can do to get to the fastboot
I think're briked because I already change the MID 0P6B10000, maybe the problem is his
help me please
driver747 said:
2months her that I try to solve the problem of my phone, I try everything, still nothing,i have htc one m8 sprint
r) version: 0.5
r) version-bootloader: 3.19.0.0000
r) version-baseband: 1.09.20.1112
r) version-cpld: None
r) version-microp: None
r) version-main: 6.20.651.3
r) version-misc: PVT SHIP S-OFF
r) serialno: Mod Edit
r) imei: Mod Edit
r) imei2: Not Support
r) meid: Mod Edit
r) product: m8_whl
r) platform: hTCBmsm8974
r) modelid: 0P6B70000
r) cidnum: 11111111
r) battery-status: good
r) battery-voltage: 0mV
r) partition-layout: Generic
r) security: off
r) build-mode: SHIP
r) boot-mode: FASTBOOT
r) commitno-bootloader: 205bdca3
r) hbootpreupdate: 11
r) gencheckpt: 0
total time: 0.078s
I board try with all these RUU, but my phone NOT START I turn on my phone, 2 seconds, turns itself off
RUU_M8_WHL_K444_SENSE60_SPCS_MR_Sprint_WWE_3.30.651.2_R_Radio_1.08.20.0916_NV_SPCS_1.52_003_release_395172_signed_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426232_signed_2
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3_2
everything I can do to get to the fastboot
I think're briked because I already change the MID 0P6B10000, maybe the problem is his
help me please
Click to expand...
Click to collapse
Change your MID back to Sprint then RUU.
I'm already in MID 0P6B70000, and I all try, stock firmware and RUU stock, always the same problem, my phone goes off at startup,
please please help me