Captivate flashing to stock i9000 rom Pls help - Captivate Q&A, Help & Troubleshooting

Hi
Just bought my first android - captivate. Its on firmware 2.2 build froyo.uckb1 baseband i897uckb1 and kernel ver 2.6.32.9.
I wish to install samsung galaxy s i9000 gingerbread stock samsung rom on this. So, downloaded firmware I9000DDJV9 ## 2.3.3 2011 July
I9000ODDJV9
from sammobile.
Used clockworkmod recovery. Booted by holding vol up down and power. Did back up, reistall package, factory reset, partition wipe and update from zip.
It gave message opening file..installing..
After that it just seemed to get stuck. Half an hour passed and nothing happened.
What have I done wrong. Pls advise. Fortunately, I removed the battery botted into clockwork and restored.
Thanks

where to begin?
first of all:
you tried flashing a rom intended for ODIN/Heimdall in CWM
secondly, DO NOT flash straight i9000 firmware from sammobile on your captivate!
screen rotation will not work, home/back buttons will not work properly, there will be no voice when you make a call, and worst of all, you will be flashing i9000 bootloaders!
do not do it. we really do not want to have you opening another thread about you bricking your phone for doing something so stupid.
READ READ READ READ

Thanks for saving me. Can u sugest any custom i9000 based gb rom for captivate. This is my first android and I am trying to learn...

You'll have to read First and last few pages of the threads and get an inclination of what people are saying about the ROM. Noone can tell you what you'll like the best, its all subjective.
On that note: I hear mosaic is nice
Lmao

mk15 said:
Thanks for saving me. Can u sugest any custom i9000 based gb rom for captivate. This is my first android and I am trying to learn...
Click to expand...
Click to collapse
Im using SauRom... its based on i9000 and its really good
use this method ....its the easiest way
http://forum.xda-developers.com/showthread.php?t=1350266

Because I wanted to use Captivate outside of the US, I was also looking for ways to flash i9000 roms.
I found some modded roms, most of which were odin based, but none of them worked properly. After multiple bricks, I just gave up and installed CM7 instead. It works like a charm without any problems and it's not missing any functionality from the i9000 rom.

I just resurrected my captivate. I think I am going to flash CM7.

Scaevola said:
Because I wanted to use Captivate outside of the US, I was also looking for ways to flash i9000 roms.
I found some modded roms, most of which were odin based, but none of them worked properly. After multiple bricks, I just gave up and installed CM7 instead. It works like a charm without any problems and it's not missing any functionality from the i9000 rom.
Click to expand...
Click to collapse
why do you need i9000 rom for outside US use? the only difference between i9000 rom and i897 roms are that i9000 supports HSUPA....everything else is same..
ofcourse i9000 has more features....but to use it outside US, you just need to unlock it...

Related

[Q] Odin one-click softbricks my phone

I'm having a bit of trouble with Odin one-click. Last night I decided to upgrade from Perception 10.4 (Froyo based) to Perception 2b3 (Gingerbread based). I plugged it in, put it into download mode, and activated Odin. It ran just fine, but at the end, my phone rebooted into a boot loop. I ended up putting together a jig to get it back into download mode, and tried again. Same thing happened. I eventually ended up using a Froyo Odin to qwerty least get it working again. Does anyone have any ideas as to why Gingerbread Odin soft bricks my phone, and what I should do to fix it? Let me know if you need any more details. Thanks in advance.
I know this would do better in the odin thread, but I don't have enough posts to post there, mending the fact that I've been lurking around for close to a year
Guess I'll just keep posting here until a) someone responds or b) I have enough posts to ask in the proper thread
I'd ready like to be able to get my cappy running Gingerbread tonight. Anyone have any ideas?
What one click are you taking about? Is it this one?
http://forum.xda-developers.com/showthread.php?t=731989
If it is, this will take you to stock eclair. Not sure what ur talking about with one click froyo. There is a one click GB from Design Gears in the development section. It flashes the newest release of GB stock. If you can get into dl mode you can flash either of the one click odins, but read about both before you do. Bootloaders are involved, and if you don't know about them they can be trouble. Read in development section.
This is a link to one click for GB stock. CONTAINS BOOTLOADERS.
http://forum.xda-developers.com/showthread.php?t=1127249
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry, for some reason can't get that second link to work properly. Doing this from my phone. Just type in the url. If you decide to flash this GB oneclick, you'll be on the kf1 "official" release. Check dev section and you can flash beta cognition if you want. People are having great results with this rom, including myself. Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
I recommend flashing the KF1 odin one-click. I just flashed that one, and it worked like a champ. Its in the Continuum v6 thread at http://forum.xda-developers.com/showthread.php?t=1136128. If you read the instructions it will work flawlessly. The only odin problems I've ran into have been user induced.
Okay, I'll try out that KF1. All I really need it for is to get the bootloaders so I can install other 2.3 roms. Will this work for that?
The Froyo Odin I was tackling about was just an older version, I think.
Edit: Why is it so much more difficult to go from 2.2 to 2.3 than it was going from 2.1 to 2.2? Upgrading to 2.2, I just had to use CWM to flash the new rom onto the phone.
Okay, I was trying to follow the instructions in the Continuum thread, and it looks like I am supposed to go back to Eclair before flashing Continuum. I was using this one-click Odin, and it was causing my phone to softbrick. No idea why. Will I be able to use that KF1 Odin to get to Gingerbread, then flash other GB based roms?
And by the trouble caused by bootloaders, you just mean how it will hardbrick if it loses connection in the middle of flashing, right? Or is there more. I've been switching out roms on phones for a while now, but it hasn't been this complex before...
If you mix bootloaders, you will hard brick ur phone. 2.1/2.2 roms have the same bootloaders. GB boots are different. That's why there is more involved to flash GB roms. Basically all the GB roms are I9000 based roms. The kf1 is an i897 based stock rom. If you flash kf1 stock rom, you will lose cwm. You can try cog beta 2 rom if you would like. After following steps to flash GB bootloaders with link mentioned above, check dev section. There are currently 2 kf1 custom roms. I use the cog beta 2, and it works great. people have mentioned that they have flashed i9000 roms over kf1, but I personally haven't, cuz so far cog beta is working great and the call quality is outstanding compared to any of the i9000 roms. Read read read read, before taking any steps. You don't want to ruin it phone! If you want to flash i9000 based GB, read this:
http://forum.xda-developers.com/showthread.php?t=1045734
Btw, what build is ur phone? (4 digit number under battery). Some builds, especially 1010 have trouble with oneclick.
Sent from my SAMSUNG-SGH-I897 using XDA App
So it sounds like what I need to do is use that KF1 Odin, then I can flash other roms over that? How can I tell which custom roms are KF1? Is Perception KF1 based? What would you recommend I read to make sure I'm doing it right? Are there specific threads that are especially helpful for this? Thanks for all of the help, I'd really like to learn how to do this.
It'll say in the title. Liked I said, currently there are only two kf1 based roms. Cog beta and another one that I can't remember the name of. If it says something in the title besides kf1/or i897, it's for i9000. Ex/ jvh, jvo, jvp are all i9000 based.
Sent from my SAMSUNG-SGH-I897 using XDA App
What do I need to do if I want to use a non-KF1 based GB rom? I've been very happy with Perception, and I'd like to keep using it.
If you want to flash GB stock that is based off of I9000 read and follow this, step by step:
http://forum.xda-developers.com/showthread.php?t=1045734
After you do this you can flash GB roms via cwm.
If you want to flash GB with kf1, you can, and people have been running I9000 based custom roms on the same bootloaders. JUST MAKE SURE YOU CHECK ANY ROM YOU'RE FLASHING TO SEE IF IT INCLUDES BOOTLOADERS. I personally haven't run any I9000 roms after flashing kf1, but I believe if you want to do this, (NOT POSITIVE ABOUT THIS, SO YOU MIGHT WANT TO RESEARCH THIS FIRST) you would have to flash an appropriate I9000 kernel using odin (not oneclick, but the full version). Put the kernel in the PDA slot, uncheck repartition, and auto reboot and flash. That way you will get cwm 2 or3 back which will enable you to flash the rom you want. (Remember, with stock KF1 you lose cwm). After kernel flashes, boot ONLY into recovery, and flash rom that you put on your SD card before doing any of this, and flash via cwm. AGAIN, NOT POSITIVE THIS IS WHAT YOU DO, SO RESEARCH.
That makes a lot more sense than the instructions I was trying to follow. I'll try that in a bit.
It worked! Thanks for all of your help
What did you end up doing? GB I9000 stock, or kf1 then flash I9000 custom rom over it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I used the I9000 GB stock rom from that link you posted, then flashed a custom rom over it. I ended up using Perception 2 beta.
Glad it worked for you.
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Need captivate user needs help

typo on the title, i meant New captivate user needs help LOL
Hey guys,
I've gotten myself a Rogers Captivate (SGH-I896) running Continuum v5.5.
Model number states GT-I9000 with baseband I9000TDVJP9, Build GINGERBREAD.XXJVO
I'm not a total noob since i have a Nexus S and used to own a t959 vibrant, but seems like the captivate is confusing the hell out of me lol. Here are a few questions i hope the community could help me out with
1. Boot up screen states GT-I9000, so i guess this means this was flashed with GB Bootloader? i'm assuming we dont have official Gingerbread on the captivate hence the need for the GB Bootloader (Please correct me if i'm wrong)
2. i have used ODIN on my vibrant many times. Now do i need to download a specific version for the captivate or is ODIN the same for all Galaxy S phones?(Please note that i have the AIO Vibrant Toolbox so ODIN version is the one that comes with it)
3. If i want to change ROMS, to lets say the Sensation ROM, can i flash it using CWR or do i have to change bootloaders first? and Can someone kindly tell me which ROM can i just flash on top of my current ROM.
4. If i want to start all over again and get back to stock, what are the steps i need to make. can i just put it on download mode and Odin back to stock the same way i used to do it on the vibrant? or do i have to change bootloaders first.
5. Lastly, is there a big difference between the AT&T and the Rogers Captivate? Am i able to flash all the custom ROMS here or do i have to find specific ones that will only work on my version?
You may have noticed that the bootloaders are my main cause of worry, coz i know that a mishap with those would cause a hard brick. Hope someone could give me a few minutes of their time to help a captivate noob get started on flashing these amazing ROMS on my captivate. Thank you!!
VibrantWind said:
typo on the title, i meant New captivate user needs help LOL
Hey guys,
I've gotten myself a Rogers Captivate (SGH-I896) running Continuum v5.5.
Model number states GT-I9000 with baseband I9000TDVJP9, Build GINGERBREAD.XXJVO
I'm not a total noob since i have a Nexus S and used to own a t959 vibrant, but seems like the captivate is confusing the hell out of me lol. Here are a few questions i hope the community could help me out with
1. Boot up screen states GT-I9000, so i guess this means this was flashed with GB Bootloader? i'm assuming we dont have official Gingerbread on the captivate hence the need for the GB Bootloader (Please correct me if i'm wrong)
2. i have used ODIN on my vibrant many times. Now do i need to download a specific version for the captivate or is ODIN the same for all Galaxy S phones?(Please note that i have the AIO Vibrant Toolbox so ODIN version is the one that comes with it)
3. If i want to change ROMS, to lets say the Sensation ROM, can i flash it using CWR or do i have to change bootloaders first? and Can someone kindly tell me which ROM can i just flash on top of my current ROM.
4. If i want to start all over again and get back to stock, what are the steps i need to make. can i just put it on download mode and Odin back to stock the same way i used to do it on the vibrant? or do i have to change bootloaders first.
5. Lastly, is there a big difference between the AT&T and the Rogers Captivate? Am i able to flash all the custom ROMS here or do i have to find specific ones that will only work on my version?
You may have noticed that the bootloaders are my main cause of worry, coz i know that a mishap with those would cause a hard brick. Hope someone could give me a few minutes of their time to help a captivate noob get started on flashing these amazing ROMS on my captivate. Thank you!!
Click to expand...
Click to collapse
1. Yes, You flashed the i9000 GB Bootloaders that are compatible with our phone. If you look on the forums there is a one-click for the kf1 bootloaders that are made for our phone and much harder to brick.
2. There is different odin oneclicks for the captivate and different files for odin. Not all galaxy s files are compatible with all the different galaxy s devices. Be sure to download captivate specific files. If they are not captivate specific make sure they are known to work with our device, the safest way to do this is to stick to files on the captivate forums.
3. I typically 1-click back to stock jf6 and follow steps to flash the new rom when I want to flash a new rom. Be sure not to use the old 3 button fix and I would be hesitant to do this without a jig ready if my 3 button didnt work out of the box.
4. Odin 1-click JF6(NOT the 3 button fix) should have the primary bootloaders, it has always reflashed the eclair/froyo bootloaders for me and seems to be the best way to restore factory settings, from there its easy to update using Kies or to flash a custom rom through CWM without even rooting. All you need is to install it with an update.zip you can find on the forums easily. Edit: If you are trying to get to stock for warranty exchange you'll have to find rogers specific stock roms which are on the captivate android development forums. AT&T Roms should work with rogers with proper APN settings though(at least thats my understanding. I am on AT&T and have an i897)
5. My understanding is the phones are the same hardware wise just the APN settings differ. I may be mistaken though and you may want another more informed Rogers user to respond to this question.
Thanks Xijar
Sent from my Google Nexus S using XDA Premium App

[Q] Flashed Firefly & CM7 a couple of times, but now I can't root my Captivate

Hi all,
over the last couple of weeks I've been experimenting with Firefly 3.0 on my Rogers I896 Samsung Captivate. Then I put CM7 on the phone, but decided I liked Firefly better so I tried to switch back. Trouble is, it looks like I did something wrong because now I can no longer root my phone. I have searched a lot on line, and tried several root methods including z4root (which is what I was using during the Firefly installs - worked great) and SuperOneClick - no joy. Z4root runs for a few seconds, and finally just returns to the home screen rather than re-booting; and SuperOneClick goes through a lot of commands and finally hangs with the message "waiting for phone" (or something close to that).
I've used Odin 1.81 to flash back to the stock Rogers 2.1 image, then to 2.2. (I used the images from here.) When I dial *#1234# I get CSC="unknown" and when I dial *2767*4387264636# I get PCode = "SGH-I896ZKAATT" but I think this is wrong, I think it should display "SGH-I896ZKARWC". I tried the fix documented here and following this procedure I can get the CSC code to read "I896rwcjl1". But I can't load a custom ROM because none of the root tools will root the device.
One other problem I ran into - don't know if it's related, but I think it is - if I try to set up the stock e-mail client to use our Exchange server, it is not able to connect to the mail server even though I know FOR SURE the credentials are correct. (The same setup works like a champ on other Android phones.) I think that the firmware is sending some phone-related info to a Samsung server to validate the license for the Exchange client software, and this is actually the part that is failing rather than the connection to the mail server.
Can anyone provide some direction to a long-suffering Android noob who just wants his Firefly (and exchange e-mail) back?
Thanks in advance
Just go into download mode, Odin/Heimdall a CWM-based kernel onto the phone, then don't even bother with standard rooting procedures; just reboot to CWM recovery, flash a custom ROM and go.
Flashing to stock is largely unnecessary for this.
Aus_Azn said:
Flashing to stock is largely unnecessary for this.
Click to expand...
Click to collapse
NOT true coming from an aosp rom you HAVE to flash back to stock with either a one click or use a .pit with the firmware .tar. cm7 and miui use a completely different partitioning table if you try to flash a tw rom over them it will not work.
but yes you are right about just flashing a kernel with odin/heimdall that has cwm baked in. no need to root before you flash a rom.
studacris said:
NOT true coming from an aosp rom you HAVE to flash back to stock with either a one click or use a .pit with the firmware .tar. cm7 and miui use a completely different partitioning table if you try to flash a tw rom over them it will not work.
but yes you are right about just flashing a kernel with odin/heimdall that has cwm baked in. no need to root before you flash a rom.
Click to expand...
Click to collapse
I thought he meant oneclicking back to full stock (2.1 or 2.2), which is unnecessary due to bootloader rubbish. 3File to GB is pretty much the only way to go.
Thanks! 2 more follow-up questions
Thanks all for your helpful feedback. Two more questions:
what ROM(s) would you recommend that has CWM built-in?
I'm assuming once this ROM was loaded, I could replace it witl Firefly fairly easily?
Thanks again
embsyntax said:
Thanks all for your helpful feedback. Two more questions:
what ROM(s) would you recommend that has CWM built-in?
I'm assuming once this ROM was loaded, I could replace it witl Firefly fairly easily?
Thanks again
Click to expand...
Click to collapse
a ROM doesnt have CWM built in....a kernel does
READ, READ, then READ some more
please read the new user guide (below in sig)find out what stickies are and find said stickies.
also if needing rogers stock roms (one clicks and non one clicks with pit....) also look in my sig.
they call me mr. rogers.
Thanks for the clarification. I installed CM7 using the guide on their wiki page and everything works.
Sent from my SGH-I897 using XDA App

New to captivate, need help

OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
No need to flash the bootloaders, you have the gingerbread ones thanks to kies, they work worth EVERYTHING so you do not need to ever flash bootloaders again.aahs i digest you don't, Cause flashing those is the only tine you cab hard brick.
Flash corn kernel with Odin right now on gingerbread, then boot into recovery factory reset and format /system, and flash the ics ROM twice. Bingo bango you're done.
Thanks. I'm just switching from a Sony X10 so things are a little different here. Every guide said start at 2.1 so I didn't think i could flash from GB. I want to try ICS, but the X10 builds are still alphas.
Sent from my SAMSUNG-SGH-I897 using XDA
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
capocaccia said:
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
Click to expand...
Click to collapse
some people have reported that gingerbread bootloaders work with Cyanogenmod
He meant flash from CyanogenMod or any other MTD ROM to BML ROM
Again, thanks for the info. Maybe I'll write an updated guide after I get accustomed to this phone and ODIN. Flashtool for the X10 definitely spoiled me.
jfalgout2003 said:
OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
Click to expand...
Click to collapse
I have successfully flashed about 10 roms while having gb boot loader they include 2-3 version of cm7, two version of miui rom , and many more gb boot loader can run any older or newer rom on captivate no need to downgrade bootloader
I'm a quick learner. I just switched over from a Sony X10 that was running a MIUI rom. My wife bought an iPhone so I took over her phone. I'm still learning the ins and outs of the captivate and how it works. I'm loving this phone. It's capable of so much more than the X10. I'm also loving this ICSSGS rom. It's smooth as butter.
Sent from my SGH-I897 running ICSSGS on Glitch using XDA
imnew
how to change model name for market
to access not supported apps?
inside file build.prob i have changed name but not working

i9000M Soft keys not working after fw update

So I was trying to root my i9000m and I read a forum post that advised me to update the soft key fw before doing so... little did I know I was on a custom fw already so it broke my soft key functionality. I've read a few posts that have instructions to fix the problem, by rooting the stock fw for the model and updating soft key fw before rooting again. problem is my phone was originally on FROYO and I can't locate the original file anywhere. can anybody point me to a file dl for the stock fw, or maybe someone has the file on their computer they would be willing to share? it's a bit frustrating not having the keys to go back, and i can't use certain apps due to not having a menu key..
If you don't find what you are looking for, try updating to a custom ROM that includes a Navigation Bar, as shown in the attached pic.
What's the ROM in the screenshot?
It's SlimBean 3.1 = Jelly Bean 4.1.2
With this ROM you can have up to 5 soft keys in the Navigation Bar.
This way you could care less about the phone's soft keys.
There are sites such as this one where you can find official Samsung roms
http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
If you did manage to root your phone, you could also try this: http://forum.xda-developers.com/showthread.php?t=1832638
Thanks nyloncrack, I didn't know that there were roms that included a nav bar! I will try that, and Marshian I've gotten the firmwares from sammobile but apparently my original firmware for the i9000m (Canada) was 2.2.1, which I have found, but apparently not found the proper version of the rom that came stock with my phone. I believe it was 2.2.1 froyo. I am currently running 2.2.1 froyo.xwjsd which seems to not be the correct version.
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Marshian said:
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Click to expand...
Click to collapse
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
trickassfoo said:
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
Click to expand...
Click to collapse
Good to hear!
I've got the I9001 so I don't really know what kind of roms are available for you, but in my experience for my own phone ICS is currently the best trade-off in features and stability. JB is still quite new and not fully ported yet, while ICS is nearly bug-free. It could be different for your model, that's just my two cents. Either way, as long as you don't brick your phone you could always try out a couple of roms and see what you like best. The only downside is changing a major version requires a full wipe.
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
nyloncrack said:
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
Click to expand...
Click to collapse
I've tried using that guide before but the JVP link is invalid. i did a quick google search am i just looking for Gingerbread? because I have a file already on my computer titled "CF-Root-XX_OXA_JVP-v3.7-CWM3RFS.tar"
Yes, that will work.
Looking at my notes from back then I actually also used:
CF-Root-XX_OXA_JVT-v4.3-CWM3RFS, and
CF-Root-XX-_OXA_JVU_2.3.6-v4.3-CWM3RFS
They were just later versions of GB.
JVU was Samsung's appeasement to i9000 users when they were told ICS wasn't coming. Had a couple of ICS features; window dressing.
Remember to make a full backup before touching anything this time
I've been trying for hours but I cannot for the life of me get windows to recognize the device in download mode. It was working fine until i updated the rom, then intermittently, then i updated the rom again and it has stopped working. i've uninstalled the drivers, tried with debugging on and off, restarted windows, installed the newest version of kies, bought a new usb cable, to no avail. this is maddening. is there a better alternative to do this on my mac? I'm using a virtual system running windows but I'm positive that isn't the problem, since it was working great before on vmware, and parallels. any ideas? I'm about a half hour away from selling this device and going back to the iphone haha.
so basically my question now is how do I downgrade back to the original firmware, so I can put this nightmare behind me? I had it unlocked and rooted on gingerbread before... don't ask me how it took many many hours. now the device isn't even being recognized in kies. If I don't get this figured out soon i'm flipping this b*tch for an iphone 4, because I do appreciate the one touch jb/unlock. I've literally wasted days of my life trying to figure this out and it doesn't seem to be getting me anywhere. too bad because I really appreciate the android system and all its capabilities but I don't have the time to waste on stuff like this
Another Edit! So, after fussing and fiddling, I decided to try one more time, I swear, I was actually going to give up at this point if it hadn't worked. so basically I removed kies, loaded the driver i was using, which was 1.3.450.0 and it didn't work, so I loaded 1.5.5.0 and it connected! My guess is that after updating the rom the driver was outdated, but I figured kies would give me the most up to date driver, seems it didn't oh well, I'm almost afraid to load ics since I've worked so hard and wasted so much time up to this point, but i've come this far...
one more edit, the kg3 modem kept crashing odin on me so I had to stick with the jl2 that was flashed earlier.. which doesn't give me network access, I'll try to find another file but is there any reason odin should be crashing like that due to this particular file?
hahaha, shouldn't speak too soon, jl2 works after reboot, should I update my modem firmware now, and what is recommended for my system {2.3.4} kernel {2.6.35.7} and if i flash to ics will I need kg3? Thanks for all the help with this seemingly never ending process

Categories

Resources