Hello, this is my first mail. I am also writing for help.
I have a chinese 2Din car stereo called Maisun MT-8001 (800x480), and I had problems while installing MioPocket 4.0. It has 2 zones: radio,bluetooth,ipod, video, dvd zone and the GPS/Windows CE 6.0 zone. The problem is with windows zone.
First, it doesn't boot, it got stuck in the first screen, so I decided to flash another time wince. It worked, but I wasn't able to find a WinCe 6 with the same resolution as mine. Some of them has an acceptable resolution but the touchscreen didn't worked, some of them the opposite... While trying WinCe firmwares, I added to one of them a file from another one because whitout it it doesn't install, but it was an error, because it got stuck while flashing eboot and now the GPS zone is dead.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I click on GPS it just says: "No signal" and if I try to flash anything it doesn't care.
Do you know how to solve it? I think that if I could flash another time the eboot (I think it's the bootloader) it will be alive another time but I don't know how...
If you think that opening it and doing some soldiers will help.. I would do it...
PD: I have the firmware from the seller
Please, can you help me?
Related
Hi guys,
I think my phone is bricked or something, when i woke up this morning my xperia was acting a bit strange, couldn't find some .exe files for like youtube and contacts. So i rebooted my phone. now all i get while booting is the little xperia intro and then it's frozen.. unlucky i can't post a picture to show you..
i was running the latest rom of christian's roms: version 3.511 build 28002
What i did try was to boot my device in the 4 coloured bars and run Hard SPL on it, this didn't work out either:
Here you can already see it is like i don't have a OS anymore..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Again here:
And this is the error i get:
Can someone help me out here?
Thank in advance!
Well thank god thare is another way for putting OS on X1, than with this utility. With this program you must have working ROM, to put another ROM on it. But with the second method, instaling ROM from MicroSD, all you need is working HardSPL Bios. Try this method.
If this was the only method, thany we would have a lot of briched Xperias here, couse from time to time OS can die. Bios is a safeguard. But if Bios is broken...
Great i'll try that!
I'll let you guys know if it works.
Thanks!
It worked! thx for ur help!
I was trying to do the gingerbread on this new tab for my buddy. But, it failed and for some reason, I cant get it to do anything. Take a look at this picture and help me figure this out please.
If I can atleast get it back to stock, I can try to other methods, however, it wiped off the original bootloader and I cant find the bootloader anywhere.
Help! Please!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, there!
I have the same problem with my tab. I left it OK at the evening and the very next morning I found it dead with black screen. Restore mode didn't work either, so I decided to re-install the software. After installing the Gingerbread it cannot load properly always giving me the same errors.
At the service centre they told me that I need to replace the memory chip, because it's faulty. However, they didn't know the exact problem, because my device wasn't bought in my country.
Did no one know anything about this??? Just found my Tab dead after having ICS on it for nearly 2 weeks....pretty stupid. I'm stuck with all these "can't mount" errors. Nothing I've tried will fix this issue. Any insight would be appreciated on this matter.
So, I know on the long list of problems in the world, this is probably the lamest but it is something that bugs me.
I have an HTC One GE 4.3 (sinless Rom for those that want to know) and whenever I connect it to my computer, this ugly icon is displayed in the windows explorer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a beautiful HTC One .ico file that I want to replace it with, but I've been searching how to do this for about three days to no avail. I've even installed the horrendous HTC Sync software just for the drivers that were undoubtedly included with it, that didn't work.
I suspect it's because I'm using a GE rom on my phone as opposed to an untouched sense ROM, but any help would be greatly appreciated.
Also just in case you can't tell, I'm running Windows 8.
I hate double posting, but it appears I FINALLY found a solution, so I thought I'd share.
I found this topic thread on another site, and after initially running into problems, It finally worked!
Here is the final result!
If anyone wants to do this with their own HTC One, here is the .ico file I used.
Hello,
I've searched high and low and can't find any mention of this issue happening to anyone else. When I first turn on my HTC One I am shown this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After a few seconds the standard animated boot splash is displayed.
This screen should just be displaying the Google and/or HTC logo depending on if I'm running stock Android or not. Does anyone have any idea how I can reset this slash screen back to default?
Everything else on the phone works without issue and my bootloader is unlocked and I have S-OFF.
Thanks for your help!
It figures that I would solve my own problem moments after posting this on XDA. I downloaded and flashed a fresh copy of what should be the same RUU for the Google Play Edition ROM and this issue is no longer occurring. Odd that the boot splash would corrupt like that but everything else work perfectly.
Reminds of HD2!
sent from my mobile device
Yeah HTC has been using that slash screen as a fall back for as long as I can remember.
I just flashed this Sense RUU and it looks good as well:
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_telus_wwe_3-22-661-1_r3_radio_4a-20-3263-16_10-38k-1157-04_release_336571_signed_2_decrypted-zip/
So it looks like I'm good at this point!
Hi @ all.
Im pretty new to "android auto".
I recently bought this device:
s.aliexpress.com/Ezy2A32u
Its ok for that price and i wanted to give it a try.
Im pretty happy, but there are two little problems:
-theres a little "noise" on low volume(i think the cheap hardware's causing it) but i can live with that for that price
- software... It seems to be android 4.4.2 with some pre installed apps.
Some of them ive already uninstalled with root apps.
But overall, im not happy with it, theres also the radio app which starts every start automaticly.
So the main question is, is there any possibility to install a custom rom?
Many thanks
In your settings there should be some information listed which will say something like MTCB or MTCC or MTCD thats the first important part to deciding which rom you can run. The picture in this thread should help you find it.
http://forum.xda-developers.com/showpost.php?p=61291848&postcount=14139
Many thanks for your Answer, ive just checked it and i cant find anything like that.
This is what i found:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And when i press mcu several times, it wants a Password
Can someone help me out?