i9000 noob owner,need help please - Galaxy S I9000 Q&A, Help & Troubleshooting

What are the best combinations for i9000 at this moment?I mean what firmware+lagfix should i put on my phone?
Now i have 2.3.4 XXJVP.
I have just one preference,to put ICS on this device.
Please give me download links+step by step guide for beginers.Don't send me to other page.
Cheers.

there shd be links and instruction on their specific threads.. however ICS do follow CM7 procedures for installation

xeNonn1 said:
What are the best combinations for i9000 at this moment?I mean what firmware+lagfix should i put on my phone?
Now i have 2.3.4 XXJVP.
I have just one preference,to put ICS on this device.
Please give me download links+step by step guide for beginers.Don't send me to other page.
Cheers.
Click to expand...
Click to collapse
here is the link:http://forum.xda-developers.com/showthread.php?t=1102881

ICS for beginners
Maybe you should first read more about root, recovery mode, and flashing in general, because when anything happen with your device, you may have to deal with odin for example.

xeNonn1 said:
What are the best combinations for i9000 at this moment?I mean what firmware+lagfix should i put on my phone?
Now i have 2.3.4 XXJVP.
I have just one preference,to put ICS on this device.
Please give me download links+step by step guide for beginers.Don't send me to other page.
Cheers.
Click to expand...
Click to collapse
If you're new to this, you will have to read a lot more than one page!
Also ICS is still only a release candidate for i9000, so tisn't perfect, there be [small] dragons...
Flake x

i dont think u should flash ICS now as u r a beginner...wait for a stable release,but u can always go for the GB roms..

Good guides are available
I, being a noob, installed ICS just fine using a really clear step-by-step guide from theandroidsoul.com/android-4-0-update-for-galaxy-s-i9000-custom-rom/
Download links are included in the guide, and I encountered no major problems so far.
Just 2 more tips: if you get an error during the flashing, just reboot into download mode again and flash again and if you get in a bootloop after updating from zip, reboot into recovery mode and update from zip again, should work.

Related

[Q] Upgrading Froyo UCJI6 to latest Gingerbread

Hello
I have captivate from at&T ( I897). I upgraded last year from eclair to froyo UCJI6 from some site.
Please can some one guide me step by step how to get latest gingerbread. I never had gingerbread on my phone. Upgrading from UCJI6 scares me.
Your help would mean a lot to me.
Thanks
Dillon
xoom11 said:
Hello
I have captivate from at&T ( I897). I upgraded last year from eclair to froyo UCJI6 from some site.
Please can some one guide me step by step how to get latest gingerbread. I never had gingerbread on my phone. Upgrading from UCJI6 scares me.
Your help would mean a lot to me.
Thanks
Dillon
Click to expand...
Click to collapse
Did you even try to use the search? or look at the stickies?
How to Flash Roms Sticky
List of Stock packages and 1 clicks Sticky
XDA Video
prbassplayer said:
Did you even try to use the search? or look at the stickies?
How to Flash Roms Sticky
List of Stock packages and 1 clicks Sticky
XDA Video
Click to expand...
Click to collapse
I looked at your post but it was confusing for me as i dont know much.
There were two download links..one was boot loader free ..other was different one.
Can you please send me the the right steps and link for downloading
thanks
Another resource is
MobileTechVideos <- good video guides.
That being said, modifiying your phone can lead to hard bricks. So above all read and understand everything. Most of the danger is flashing bootloaders (that's why you see packages with and without bootloaders, to limit the danger). If you corrupt one of the bootloaders or flash 2 different (none matching) bootloaders you need a Jtag or UnbrickableMod service. When flashing Gingerbread you NEED gingerbread bootloaders. Once flashed you are golden and don't have flash those ever again.
http://forum.xda-developers.com/archive/index.php/t-1276762.html
i checked above forum where u helped the guy with upgrading UCJI6 to GB.
He had issues while upgrading but eventually he was succesfull.
I could not find which method he used ..
please help me if possible
Read up on how to get in Download mode and how to use ODIN (or Heimdall if you are running a none windows machine). Download a Stock gingerbread rom with bootloaders and flash. The latest is KK4, but i've never used that specific package (though it should have bootloaders) I can speak for KJ3 on that thread.
Basics.
Open ODIN (1 click or not) as admind
Get in download mode (press vol up+voldown+connect to computer
If normal ODIN use the PDA slot and select the .rar.md5 package
Hit start
Let it finish and bootup
???
profit
I'm not responsible if anytthing should go wrong. If odin gets stuck or you do something wrong you will soft brick or possibly hardbrick your phone.
i am giving up.
Can not find any links and steps which are of great help for Upgrading to GB from UCJI6.
Some are going back to 2.1 before upgarding some not.
Dont know what to do
Going back to stock is-was only used for cwm flashes. You will use ODIN. 2 way different things. Follow my steps. Or read through the tons of threads here. It isn't that hard.
waymon31 said:
Really? the guy just asked a question and i can understand he doesnt want to ruin his investmet. we were all noobs once!!! no need to be rude i mean really how much did it cost you to answer his question?
Click to expand...
Click to collapse
he gave up because he couldnt find EXACT instructions on going from one particular FROYO build....because if he had done any actual research, he would know that it doesnt matter what version of FROYO he is on, he will need to flash the ODIN package with the bootloaders....its all covered in the vast damn posts that already cover this extensively. there was ZERO reason to fire up a new thread.
he has been linked to good info and has refused to take heed. reading and UNDERSTANDING is more important than holding hands around here.
Yes we were all noobs once and yes, you need to do your research but he's obviously nervous and not understanding what he's reading right now. Hopefully he'll calm down and understand the information he's been given. We're done here.

[Q]Should I use CWM or odin to flash 4.0rom like romow?

I know this is a very stupid question but I just want to make sure flashing with CWM is viable.
For the leaked stock ics 4.0 rom I know I should use odin to flash, but how about custom 4.0 rom like Romow? Should I use CWM to flash the zip file?
Thx~
ps: I am currently running rocketrom v19 with CWM
use CWM n flash zip
Sent from my GT-N7000 using xda premium
You should read in the post how must it be done, you should start in annual kernel 3.9 then install chainfire.repack and so on
Sent from my GT-N7000 using xda premium
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Also, some ppl claimed that I need to first flash the stock leaked 4.0 rom then have my phone rooted with CWM installed and finally flash custom 4.0 rom with CWM. Is that really necessary?
Sent from my GT-N7000 using XDA App
kelvin fong said:
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
There are better roms now than ROMOW's one i think, try flashing Rocket Rom, or the new AOSP
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
kelvin fong said:
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
Click to expand...
Click to collapse
Yes youre right, there is a problem with root a cwm in ics, and you need to da that
Follow carefully the instructiones if not you wont hace fullroot
PROBLEMS!
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
brooon said:
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
Click to expand...
Click to collapse
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
kelvin fong said:
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
Click to expand...
Click to collapse
Yes, I came directly from GB!
If you can load the boot animation that means ur phone is not bricked. You should try to download a stock gingerbread rom from dr ketan's post and flash it by odin pc.
Sent from my GT-N7000 using XDA App
When going back to GB, i kinda 'restart' the whole process by going back to Stock ROM via Odin, and redo the root and CWM.
Else, there are strange quirky issue ex. CWM just hangs while wiping the phone.
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
dr.ketan said:
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
brooon said:
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
Click to expand...
Click to collapse
Should be this one(http://forum.xda-developers.com/showthread.php?t=1424997).
Firstly, download one of the roms from [Older ROMs (Directly Rootable)].
Secondly, follow the [Installation Guide For Older ROM ], the one using odin pc.
You may see below another flashing method using mobile odin, but that doesn't suit you since that one requires your phone rooted before and will keep your root after flashing. The one with odin pc will wipe out all your data and apps(of course not your SD card) and also unroot your phone. That means your CWM and root will all be gone and you have to follow another post to root it again(now this one:http://forum.xda-developers.com/showthread.php?t=1329360)
this one(http://forum.xda-developers.com/showthread.php?t=1424997)teaches you how to flash a rootable gingerbread rom, but not rooted. This one(http://forum.xda-developers.com/showthread.php?t=1329360)shows you how to root your phone and install CWM. I think these two posts are the best tutorials you are looking for.
I think you should download this >>http://forum.xda-developers.com/attachment.php?attachmentid=907734&d=1329574136
This one is better organized.
Thanks mate! Saved it to my desktop...but finally i was able to manage the problem by simply flashing a *fresh* RocketRom again (?!). I thought it would be worth a try...
Anyway: Thank you very much for your support, it´s good to still meet that friendly kind of people with patience here on the board (it´s getting less these days) hope i´ll be able to return the favor in future
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
kelvin fong said:
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
Click to expand...
Click to collapse
As far as I remember I made my very first steps with odin after I reveived my note (root, cwm)...rocket has been flashed by using cwm. But yes, my binary counter increased definitely...
...I do have a USB Jig, but in some was I am kind of afraid of going trough this! To fumble around in pure darkness...hmmm i don´t know
Have you tried it yourself?
Actually I've got a yellow triangle together with increased binary counter as I followed another tutorial guide(I should follow dr ketan's guide before).
I think removing the counter with a jig is way too dangerous for me so I don't want to risk it. Simply remove the counter only when you really need to bring your phone to samsung because maybe you don't even have to claim the warranty at all.

Flashed ZImage -> now black

Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
IdleKing said:
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
Click to expand...
Click to collapse
Please read the instructions in his post
You are on 2.3.6
1. Install Mobile Odin
2. Flash REPACK_LP1 CF
3. Let Rom Boot
4. Go to CWM and flash LiquidSmooth
5. Wipe Data, Wipe Dalvik/Cache
NoRmAlY_CrAzY said:
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
Click to expand...
Click to collapse
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
IdleKing said:
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
Click to expand...
Click to collapse
not really answering the question xD Are you ok GB or ICS right now?
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
IdleKing said:
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
Click to expand...
Click to collapse
As the install guide says you are meant to flash the repack and then go into recovery and flash the rom. You will likely need to flash a gb kernel via obin and then do as hia install guide says
Sent from my GT-N7000 using xda premium
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
IdleKing said:
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
Click to expand...
Click to collapse
Well i am not 100% sure, tbh your safest route would be to re flash a stock gb rom then root it and then try again just to make sure theres no issues, in which case you can download a gb rom from the sticky in the dev section (make sure its a older rootable image!) and flash using odin while your phone is in download mode
please start at http://forum.xda-developers.com/showthread.php?t=1424997 then/or http://forum.xda-developers.com/showthread.php?t=1329360
i am hoping of course, that you can still somehow manage to get into download mode.
I has almost the same issue! I am running speedmod kernel and i want to put back the cf-root 5.3 kernel so I flashed the tar which was included the zimage via mobile oding and after reboot the phone gave me a blank screen and no recovery! only downlaod mmod where I can manage to flash speedmod again via pc odin...
why is that happend?
Come on mate have you even read the opening page for the liquid smoother rom on all opening pages it tells you to the letter how to install and yet you don't follow it and wonder y you have a black screen. Have you installed clock work recovery after rooting your note if not search how to install cwm on you tube cursed4eva is a brilliant guy who spells it all out for you- . Please don't use the fact you a noob as an excuse as I'm probably newer than you but can read and follow instructions to the letter as the developer knows best.
W00t! The phone came back to life! Thanks alot.
Now, what i dont understand is that repack_lp1 thing. I downloaded I9220LP1-N7000-ICS-REPACK.tar ... now do i flash this one using mobile odin? Will this install the CFM?
Look for cursed4eva on YouTube watch the video were he shows you how to install clockwork then read the op of liquid smooth rom simple !
Please do some more research before randomly flashing files without having any knowledge as to what they do.
Before you start fiddling with repacks and leaked ICS based roms, read this: http://forum.xda-developers.com/showthread.php?t=1633938
If you still think it's a good idea to flash anything based on the leaked ICS builds, go to the thread of the rom you want to flash and read the instructions. Again, read the instructions and then to be sure read the instructions once more.
Then follow the instructions step by step and you're good to go.
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem. However you should follow the instruction from their website.
tknguyencsu said:
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem.
Click to expand...
Click to collapse
This snippet of information can only further confuse a man who's mustering the courage to step into the unknown. Don't post stuff like that in threads like this. You can tell that to me or any other vet, and we'll know what you're talking about. OP won't.
tknguyencsu said:
However you should follow the instruction from their website.
Click to expand...
Click to collapse
Now THIS is what he needs to hear.

Weirdest Brick'd Situation! Help Needed!

Ok, Guys my first post here in XDA, Forgive me For any Liable Mistakes I do!
So, here's the story , There's this friend of mine Who has A Galaxy Tab GT-P1000 , OS version Was Froyo 2.2. So he wanted get all the glory by upgrading it to 2.3.3 gingerbread, And He screwed it up. I dunno to what extent , he used odin to upgrade. . and the problem here is he did it more than 6 or 7 times, now it doesn't even boot up, white screen while switching it on , and yes it is able to go to the download mode so i guess its a softbrick. .and now him getting all scared he asked me to Get it all back to normal, so i used odin 1.7 saw the How to's here at XDA followed every procedure to upgrade it to 2.3.3. And it was a Big PASS. but when it rebooted it always loops at the boot where Samsung logo appears.
now we both do not know the exact version of the PDA files to download from Sammobile firmwares as the thing is bricked! from the first place!
now , all i wanna do is either just get it back to stock 2.2 and then Follow every step correctly to upgrade it to 2.3.3 or better or Directly go to a Newer version!
without any hassle. Please do let me know if a similar thread is Availaible , cause i searched a few and i couldn't find one which legitimizes with my problem
Help is delightfully Appreciated!
Thanks In Advance Guys
My recommendation, since you can still reach Download mode.
restock using Overcome Method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try ICS AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
priyana!
I will follow that. And Update about it Alright!
And thanks a Ton For the help!

where to start

I'm sorry if this is not the right place to ask this question.
I want to know how to make a back up of my factory rom before flashing my galaxy mini.
thanks in advance.
flash a custom recovery with odin and then go into recovery mode and do a backup of your current rom (stock or custom no matters )
First of all, you should start reading before posting.. Development thread is not a place for this kind of question. Post in general section. Second, factory rom cannot be backed up by CWM unlike the higher end phones.. You will always have to flash a stock rom via PC Odin to return to your factory rom.. Please do not reply to my post..
check this out http://techgeekal.wordpress.com/201...ns-settings-and-data-using-a-nandroid-backup/
avicenneanos said:
I'm sorry if this is not the right place to ask this question.
I want to know how to make a back up of my factory rom before flashing my galaxy mini.
thanks in advance.
Click to expand...
Click to collapse
View my blog for more help
In my signature
try this one
or you can try this one : http://techpandorabox.wordpress.com...-complete-backup-before-making-a-rom-android/ :good:
If you're not yet on gingerbread, better update first your device by following this LINK.
After updating, flash CWM by following this LINK.
Now that you're all set, you can now flash a custom firmware. Pick whatever you want that suits your interest well.
As for me I suggest EMANON or MIUI GB.
enjoy

Categories

Resources