Hi everyone,
I've flashed this alpha and wifi don't connect to my wireless network. How can I do?
Excuse me for my english I know it's too bad
Did you already tried reflashing it?
I've reflashed rom 3 times with all wipe but nothing
Which ROM do you use.
Did you compile it yourself or did you just download one?
I've CM9.0.0-RC0-Milestone-KANG. Some times ago I flashed the pre-pre-pre-alpha and wifi worked correctly
Someone has flashed this rom?
wifi
try wifixmanager/wifix
by default, up to ch11. if ur router is set to ch12/13.
not in range or won't be listed
Related
I just finally got sick of waiting for an official Froyo(Bell isn't about to give me an upgrade anyhow.) So I went to a froyo rom that was based on one of the stock roms. But I figured since I'm rooted anyhow why not play around, and grabbed cyanogen 6.1 and installed it. Then I end up with the issue of its not connecting to my wifi, I have no issues on the stock 2.2 roms. One thing I have noticed is the cyanogen shows the network as wep, but it's actually wpa encrypted. I flashed into it from the stock without clearing it first and it worked until I shut off and came back to it. Any ideas on what might be the issue. I'm fairly new but I did look and couldn't find anything to fix this.
I assume you flashed 6.1 stable version? I have no issue whatsoever on my device (and I also used official froyo previously). Did you wipe all before flashing 6.1?
He said he "flashed without cleaning"...so I presume no wipe. This could be the problem, a wipe is strongly adviced if going to CM from a non CM ROM. Also check the number of WiFi channels set by default in advanced settings of wifi. It is set for 11 and if the router is set to 13 or 14 it could not work
Sent from my Legend using XDA App
I had the same problem when i was installing CM6.1. (with wipe)
The phone could just se a wep version of my network and not the wpa that i have. But after i turned on and off the wifi a couple of times i suddenly saw the wpa version of my network and after i connected to that the problem was solved. I also did click "forget network" on the wep version.
Hope this will help you
ricky007 said:
I had the same problem when i was installing CM6.1. (with wipe)
The phone could just se a wep version of my network and not the wpa that i have. But after i turned on and off the wifi a couple of times i suddenly saw the wpa version of my network and after i connected to that the problem was solved. I also did click "forget network" on the wep version.
Hope this will help you
Click to expand...
Click to collapse
Trying this now but no go. Sometimes will flash it as wpa and then jump back to wep. This is after a full wipe. What I was trying to say was once I flashed in without wiping and it worked for a bit but jumped right back to not working, after the phone going to sleep.
Bump.
Any insight into this issue? Still only reading my network as wep.
Try installing "WiFi Advanced Configration Editor" from the market. You should be able to change to WPA manually with it.
Did you try to reset your wifi router?sometimes the issues came up from wifi router, not the phone itself.
Mine is fine. I share my broadband wifi to my phone using connectify.
The only problem remains is wifi disconnect frequently, but I heard that it's due to a new kernel which I use (.32 kernel)
hope it helps
Ya reset the router a few times, and it still came up like that. I did install the wifi advance config software mentioned it seemed to fix it. I didn't actually set anything up on it and it seems to have fixed it. Thanks.
CM 6.1 messed up my wifi. Wiped everything, but it suddenly doesn't find my networks.
Wiped again and restored nandroid backup of working rom but STILL the same issue now!! Can I flash the wifi drivers again somehow?
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
kpaolo said:
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
Click to expand...
Click to collapse
Hmm this is strange, so you turned data on but theres no symbol, right? Have you tried installing another kernel (maybe also applying the Kernel Cleaning Script)?
I' ve tried everything with Odin, and at the moment I have a beautiful black screen of death.
Odin cannot recognize my phone... I'm very frustrated
EDIT: Upgrading Kies'drivers, I managed to connect the phone with Odin again, so I've flashed the lastest official stock firmware to check my antennas. In the worst case, I'll be able to go to the shop for assistance without problems.
Have u tried typin ur apn maually?
Sent from my GT-I9000 using xda premium
Sounds like a settings issue. Never heard of anyone have this problem before - I've flashed every version of mintberry including betas.
I just had this issue
I just had this and figured out what is wrong, its a easy fix too! Just go to settings and wireless and change the access point for your mobile connection. I had 2 access points and just switched it to the other one and my data started working again!
Hope I could help
Hi guys! thank you for all these answers!
I've tried to set APN manually, to change custom ROM and custom kernels and coming back to stock too, but still no data connection icon (neither data connection itself).
At the moment, I'm on JVO, the latest official italian firmware, everything is fine but 3g data connection.
Other ideas? Shall i need of Samsung customer service (I hope no!)?
Solved...
MIUI default settings fault: SMS notification has ran out my money and my provider has blocked 3g connection.
My phone is safe!
Hi dear xpda users. Please help me... I have a problem with my wifi so.. When i use the wifi (browse,facebook,download) the connection is aborting for 2-3 sec and after coming back. This problem comes after i install the new Xxjvu 2.3.6 frimware with 512 pit and semaphore kernel. Please help my problem and sorry for my english.
Sent from my GT-I9000 using XDA
It's maybe your box who is joking but if it's your phone make a wipe datas (dalvik & cache partition) and post the results
i had similar prob a few weeks back as in ....my phone would connect to wifi then disconnect.....i unplugged my router for 30 secs, everything was fine after that.
hope this helps you mate
My friend have this problem too.... so... idk... i'll installed this rom to 2 sgs!
as Dustman317 partner says, make the necessary wipes, and if problems persist even so, I would prove that the router issued for a fixed channel, for example, channel 11, and deactivate the automatic that comes standard on routers. This is a fairly common problem when there are many wireless networks around, it creates interference.
If wiping doesn't work, try installing a eclair rom and then the jvu. In the 9000b variant does the same thing since jvs/jvr.
I strongly suspect it is a WiFI router issue. please change the channel to 2 or 8 which in not very popular. start with open network and then move to WEP and stronger based on your results.
Update: Solved (just reflashed the ROM)
I have a problem here with my X8. So, after I have successfully unlocked my bootloader without the network problem, now I have a wifi problem. So what I did was: rooted my phone, unlocked the bootloader, applied a nAa kernel (before that I tried the MiniCM9 with the ICS nAa kernel), then I applied the custom ROM called JoyOS... In both cases(ICS-MiniCM9, and JoyOS) I have the problem when connecting to a wifi router, I cant use it. I know it sounds strange but I can connect normally with the wifi but still I cant use it... I mean when I try to open google.. or use anything with wifi (like syncing) I just cant... it says unable to connect to the internet. I am thinking its the unlocked bootloader problem.. but I am not sure. Can someone help with this please.
Maybe just reset router...
lol???
Thats not a problem with the router... I am using the internet via that router writing this reply.. please dont be stupid and post something smart.
EDIT:
Still waiting for a reply.. I really need a solution for this..
Have u tried connecting to a totally different router cuz that may be ur problem, I have a friend who had a similar problem with an android tablet that didn't like his router so give it a go it won't hurt to try
P.S did it connect when it was stock?
Sent through my X8
it did connect when it was on stock ... and I am not sure but I think it actually was working a little while I was using the MiniCM9 ICS ROM and on the same rom actually the problem has occured. Now I am not sure if it stopped working because of the unlocking and applying a new kernel or something else happened in the mean time.. Could it be I disabled wifi somehow? somewhere?
What rom are you using? i only say that because when i swapped from minicm9 to semc debrand engine both wifi and 3g stopped working but when i switched back to minicm9 it worked perfectly again.
Try a Full wipe + wipe dalvic cache (or whatever it is) and install the rom again, hope this helps
Now trying to flash miniCm9 again.. we ll see now.. will update in a few minutes
Update:
Great, , just flashed the ROM again and now working well. Thanks anyway for helping.
No problem glad i could help
hello everyone, I just registered here for a couple issues with my girlfriend's i9001, it basically can't find Wifi connections, once you click the button to activate the wifi, it shows a green check for few mins while looking for connections and suddenly it deactivates by itself...
I read around about a file to remove via terminal emulator, the bcm_supp.conf one, but I can't find that file...
does anyone have any idea/solution for it? currently she uses internet via 3g (monthly charges) but it would be cool to be able to use the home wifi...
about bluetooth instead, it just can't find other bluetooth devices and vice versa, my nokia 5800 can't find it even if the "visible" option is activated.
ideas?
I'm going crazy about it, I already tried several hard resets and flashed the phone first with 2.3.5 and then with 2.3.6 firmwares... nothing fixed the issues...
thanks in advance for any response
ps: sorry for my english, I'm italian >_<
i had exactly the same wifi issue but flashing a new rom solved the problem. reset and reflashing the same rom didn't help. you tried several 2.3.6 versions?
you might try flashing another modem.
dr.wtf said:
i had exactly the same wifi issue but flashing a new rom solved the problem. reset and reflashing the same rom didn't help. you tried several 2.3.6 versions?
you might try flashing another modem.
Click to expand...
Click to collapse
it had the official 2.3.5 (italy), I flashed it with the same firmware and nothing happened, re-flashed it with 2.3.6 (Baltic 13th June 2012) and nothing happened...
noone knows?