Database Develop

(Rom){ODIN} Froyo ~~~That does not Brick! Downgrading Is Fine :)

1234567890

Very nice. I assume this is ASOP? from the src?

rhcp0112345 said:
Very nice. I assume this is ASOP? from the src?
Click to expand...
Click to collapse
It's the Galaxy EUR Version that I fixed to stop Bricking Phone's

Ah. so it will flash the radio + Baseband to EU?

Also, one last question.
Were you able to flash back to 2.1 using the stock firmware? with odin?
I heard once you flash to 2.2 EU and you try to go back to 2.1 TMO you brick.

rhcp0112345 said:
Also, one last question.
Were you able to flash back to 2.1 using the stock firmware? with odin?
I heard once you flash to 2.2 EU and you try to go back to 2.1 TMO you brick.
Click to expand...
Click to collapse
Did you Even Bother Reading the OP?

eugene373 said:
Did you Even Bother Reading the OP?
Click to expand...
Click to collapse
I saw. i just wanted 100% confirmation
but, does it flash the basebase/radio to EU?

rhcp0112345 said:
Also, one last question.
Were you able to flash back to 2.1 using the stock firmware? with odin?
I heard once you flash to 2.2 EU and you try to go back to 2.1 TMO you brick.
Click to expand...
Click to collapse
Read what eugene said:
It's the Galaxy EUR Version that I fixed to stop Bricking Phone's
Click to expand...
Click to collapse

eugene373 said:
Did you Even Bother Reading the OP?
Click to expand...
Click to collapse
I think the bold text in the title blinded him so he could only read the non bold text

rhcp0112345 said:
I saw. i just wanted 100% confirmation
but, does it flash the basebase/radio to EU?
Click to expand...
Click to collapse
No this Does not Flash the BaseBand / Radio to EU.
I have Flashed from 2.2 back to 2.1 5 Time's trying to Brick my Phone..
This only flashes what is Needed to make an upgrade work with out messing with anything that can Hurt the Phone!

zPacKRat said:
I think the bold text in the title blinded him so he could only read the non bold text
Click to expand...
Click to collapse
I just wanted to be 100% sure. Alot of people posting bogus firmwares. Great work. Does this do anything for the phone?
Can you give us a video? or something? as in whats better/benchmark etc.
I may flash it if its worth it. But, i prefer to wait on stock TMO if its nothing that crazy,

eugene373 said:
No this Does not Flash the BaseBand / Radio to EU.
I have Flashed from 2.2 back to 2.1 5 Time's trying to Brick my Phone..
This only flashes what is Needed to make an upgrade work with out messing with anything that can Hurt the Phone!
Click to expand...
Click to collapse
Word you own
You beat CM

rhcp0112345 said:
I just wanted to be 100% sure. Alot of people posting bogus firmwares. Great work. Does this do anything for the phone?
Can you give us a video? or something? as in whats better/benchmark etc.
I may flash it if its worth it. But, i prefer to wait on stock TMO if its nothing that crazy,
Click to expand...
Click to collapse
Eugene is a respectful developer and I'm pretty positive that his work is beautifully done and he wouldn't publish any "bogus firmware" in any form.
Start using the edit button rather than double posting =/

This is badass ill try it out tomorrow.

Does this run a lot snappier? Some of the Live wallpapers on the 2.1 are 'fidgety' when moving through screens
I'm a bit nervous to do this without a more detailed step-by-step instructions lol

Does this ROM have JIT? I had read some stuff about that not being in some of the roms that have been leaked.

mattseg said:
Does this ROM have JIT? I had read some stuff about that not being in some of the roms that have been leaked.
Click to expand...
Click to collapse
Most likely it doesnt. This is based of the same EU 2.2 ROM that was showing low Linpack scores. Of course it is an APLHA or BETA build so thats to be expected.
Most update.zip's for the Vibrant at this point only FLASH System, Data ,data, and cache partitions. I don't think anyone had taken the time to test writing recovery or boot images though the update-script which is what tells the system what to do with the contents of the said update.zip.
Thats another reason they are so safe is that they dont replace the KERNEL/RECOVERY or BASEBAND/RADIO which is a safe move.
Good work Eurgene.

OP Updated with the ODIN file...
Installing...
Extract the .zip file
Open ODIN Flasher, Select the Pit File.
Select Eugene373_GalaxyS_Froyo_PDA.tar
Select start..

Great work Eugene. Sorry to doubte you
Do you have any video of this running? or can tell us if it helps? benefits/non-working etc?
Thanks!

justanothercrowd said:
Good work Eurgene.
Click to expand...
Click to collapse
Thanks Man

[Bell 0.37.23] DEVS ONLY (Gingerbread OTA)

WARNING: DO NOT FLASH THIS ON ANY PHONE​
IT CONTAINS A NEW BOOTLOADER THAT WILL HARD BRICK YOU AND NOT FEEL GUILTY​
All of the credit belongs to devs. Samcripp for setting up Project Cheesecake, the effort to find as many international builds as possible located on cloud servers. Navalynt for cloud test CWM mod. Tenfar for CWM bootstrap. Nate_benji for retrieving the update and uploading it for development purposes.
samcripp said:
SUCCESS
I have in my position a full OTA update. This has Bell GB, but no unlock and it also has the new dreaded ap20 BL, thats been hard bricking ATT phones when people try to sbf to older builds.
Click to expand...
Click to collapse
This is what we know so far about the build. I'm making this thread only to supply the link for the update so that hopefully we can start figuring out how we can use it (if at all). 2nd-init is a possibility, and sifting through the folders might yield to some breakthroughs.
Before I supply the link I want to remind everyone not to flash this on their phone.
Link:
Nate_benji's Megaupload
Multiupload link
Folders in root:
META-INF
patch
preinstall
recovery
system
webtop
ap20bl.img
bp.img
cdrom
cdt.bin
logo.bin
metadata.gpb
Looking forward to see if we can get anything from this, and lastly, thanks again to the devs.

Reserved for devs

You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.

Would it be possible to re-package it with our current bootloader? I imagine this already would have been tried with other updates if it was possible.

D_one said:
Would it be possible to re-package it with our current bootloader? I imagine this already would have been tried with other updates if it was possible.
Click to expand...
Click to collapse
I can't say for sure but what would be great is if we could manufacture a "fruitcake" like package that would leave our BL alone. But once again, we don't have an sbf to fall back to, so we'd need to backup all of our partitions.

kennethpenn said:
You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.
Click to expand...
Click to collapse
Indeed it will be tricky... Is there a way you can help out w/o using an atrix?

Where to download Bell sbf？ U4_0.37.?

cctv35 said:
Where to download Bell sbf？ U4_0.37.?
Click to expand...
Click to collapse
I highly suggest you don't download anything since you clearly didnt read the post
The most important part is that you shouldnt be flashing anything, also, its an OTA

Ok what about this nv flash where you have to have the special cable? Would it be possible for non at&t ATRIX phones to use that method to flash our unlockable bootloader then use the the files from the rom you now have and make a fruit cake? Just theory I don't think I've read of anyone doing nv flash.
Sent from my MB860 using XDA Premium App

*Facepalm ^

Do you guys even have a stock sbf yet? I forget if NFHimself managed to make something crazy for you guys or not. *goes digging for threads*
http://forum.xda-developers.com/showthread.php?t=1059643&page=5
You can just replace some of the files, the rest need to be patched which will be a pain.

Can a dev who has installed this please post some screenshots? I'd love to see how the Bell version of Gingerbread looks!

the2dcour said:
Do you guys even have a stock sbf yet? I forget if NFHimself managed to make something crazy for you guys or not. *goes digging for threads*
http://forum.xda-developers.com/showthread.php?t=1059643&page=5
You can just replace some of the files, the rest need to be patched which will be a pain.
Click to expand...
Click to collapse
What files need to be patched?
Can't all the necessary partitions + system.img be backed up?

IrshaadH said:
Can a dev who has installed this please post some screenshots? I'd love to see how the Bell version of Gingerbread looks!
Click to expand...
Click to collapse
No one has installed this, because it contains the new ap20bl.
I'm pretty sure we'll have a bell-version 2nd-init soon though.

yes setevendeb25 is surely working on something
Magnetox said:
No one has installed this, because it contains the new ap20bl.
I'm pretty sure we'll have a bell-version 2nd-init soon though.
Click to expand...
Click to collapse

kennethpenn said:
You guys realize you can simply use the files to create an update-zip that takes out Motorola's assert checks and bootloader flash?
Very good news!
EDIT: Oops... I forgot that you don't have an unlocked bootloader to work with. It should be a bit more difficult then.
Click to expand...
Click to collapse
Its UNLOCKED now!!! Hopefully someone can create a cwm4 flashable zip for us..

nate_benji said:
Its UNLOCKED now!!! Hopefully someone can create a cwm4 flashable zip for us..
Click to expand...
Click to collapse
Mhm... hopefully sam is able to get us some Fruitcake!

bongd said:
Mhm... hopefully sam is able to get us some Fruitcake!
Click to expand...
Click to collapse
Any idea what Gingerbread build he's basing the Fruitcake on?

nate_benji said:
Any idea what Gingerbread build he's basing the Fruitcake on?
Click to expand...
Click to collapse
He's kindly asked which SBFs he should prepare Fruitcake for (lol that sounded so weird).
I'm pretty sure he'll do it for Bell, French/Orange SBF, the popular ones for sure... man, I'm so pumped!!!

Hi,
Is this the latest Bell GB build?
Can't you just use CWM and edit out the bits in updater that reference ap20bl? And delete ap20bl.img as well of course.
Is there a better boot loader out there that fixes the ram issue? Maybe a swap in would be a better idea.
This OTA is a patch so you will have to be on Bell's 37.23. I backed up all my .23 partitions if anyone needs them. I was able to get back to .23 without unlocked boot header from ORGB using edited French 2.1.1, just removed all fs code groups basically. Fuse still the same though (cat /sys/firmware/fuse/ReservedOdm=20002000200004000) .
Cheers!

[Bell] XT860 Files

Here is a new system/app folder from bell xt860 as the last one had some corrupt apks http://www.multiupload.com/GLZ0KSYI7T
danifunker said:
http://www.multiupload.com/SORQERFAYT
Here is a (rooted) system.img from a Bell XT860
Click to expand...
Click to collapse
bgdwiepp said:
I'll re upload it somewhere for you without a captcha/wait time and probably better speeds.
http://dl.dropbox.com/u/677635/bell_system_app.zip
Click to expand...
Click to collapse
Here is a link to the me863 thread which Bell users have been using to recover
http://forum.xda-developers.com/showthread.php?t=1288823

Thanks -- when I get some spare time, I'll create a thread on recovering a broken XT860 phone using these files and using psouza's tools.

That would be sweet. If you want to post a link in here or link this post in it there would be no need at all for a bell sub-forum. Did you manage to get your phone updated by any chance?

Hey Willis -- Yes, indeed, thank you! Had my phone restored to stock (albeit still rooted). Not being able to get into homescreen had me a little scared there for a bit, but as is well now!

Willis111 said:
Here is a new system/app folder from bell xt860 as the last one had some corrupt apks http://www.multiupload.com/GLZ0KSYI7T
Click to expand...
Click to collapse
I'll re upload it somewhere for you without a captcha/wait time and probably better speeds.
http://dl.dropbox.com/u/677635/bell_system_app.zip

UnhappyDroid3User said:
Hey Willis -- Yes, indeed, thank you! Had my phone restored to stock (albeit still rooted). Not being able to get into homescreen had me a little scared there for a bit, but as is well now!
Click to expand...
Click to collapse
Maybe I'm misunderstanding but you successfully applied the update to your bell droid 3? Could you post a little info on your process? Got a call from bell that my phone is fixed, looks like it was a hardware problem instead of software so I should be able to post a full system image for our phones later this evening.

I am able to use the AT&T SIM here in the US

In other words, I "unlocked the bands" by RSD a ROM that was pretty heavily customized for China Telecom:
SOLANA_SLNCT-57.1.40_Fastboot-service.xml.zip
I used RSD 5.5
After the flashing I was able to use my AT&T SIM.
This is the thread I followed, in Chinese of course:
http://bbs.gfan.com/android-2799793-1-1.html

Would you be willing to mirror those files on multi upload. China site is taking forever to respond to anything

I was hoping for a solution to be able to test Straight Talk on my Droid 3 before I jump ship. Hopefully more people will test this out and it can be confirmed!

KrInEn said:
Would you be willing to mirror those files on multi upload. China site is taking forever to respond to anything
Click to expand...
Click to collapse
I found this link:
http://www.4shared.com/file/wZAuvQ7y/SOLANA_SLNCT-57140_Fastboot-se.html
Word of caution though, the ROM is heavily customized for China Telecom, and as you may have already knew, the "Android Market" is not available in China. English is available for some display is off.

Does this really work
Sent from my GT-N7000 using xda premium

Is it possible that it's the ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=1249720
Just a thought. And it would prove my idea of XT883 being able to use the US GSM carriers.

jrsmooth said:
I found this link:
http://www.4shared.com/file/wZAuvQ7y/SOLANA_SLNCT-57140_Fastboot-se.html
Word of caution though, the ROM is heavily customized for China Telecom, and as you may have already knew, the "Android Market" is not available in China. English is available for some display is off.
Click to expand...
Click to collapse
Now you flashed this on the VZW XT862? Did you get data working on AT&T?

I'm really glad to hear this.
But I want to know:
1. If AT&T's 3G still working?
2. Am I able to still use verizon's service?
Also, if some one want the radio.img from those ROM, I could upload it.
Hope someone can tell me how to flash the Radio Image only.
I can read those chinese post.

If we could extract the radio I think it would be huge.
Sent from my DROID3 using XDA App

There's two China Telecom ROMs I've seen around, 57.1.40 and 57.1.60. They come with different radio.img files I've uploaded at http://www.mediafire.com/?4ovoaba5cxg59

Is this verizon xt862 droid,is the phone still unlocked after flashing to stock rom?
Sent from my LG-P500 using XDA App

KrInEn said:
Now you flashed this on the VZW XT862? Did you get data working on AT&T?
Click to expand...
Click to collapse
Sorry for the late reply. Yes, I flashed that ROM and Yes I am getting 3G data on AT&T here in Washington DC.

ich511 said:
Is it possible that it's the ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=1249720
Just a thought. And it would prove my idea of XT883 being able to use the US GSM carriers.
Click to expand...
Click to collapse
I have not try this ROM but it looks like it is the same ROM.

arthurcorell said:
I'm really glad to hear this.
But I want to know:
1. If AT&T's 3G still working?
2. Am I able to still use verizon's service?
Also, if some one want the radio.img from those ROM, I could upload it.
Hope someone can tell me how to flash the Radio Image only.
I can read those chinese post.
Click to expand...
Click to collapse
I can answer to question 1 that AT&T's 3G works, that's the whole point of flashing this ROM, but as I said, the ROM was very heavily customized for China mobile, even though English is available as an option, I did it just for testing purpose, I probably don't want to use the phone on a daily basis with this ROM.
For question 2, I don't know as I have no accounts with Verizon. Sorry.

TBBle said:
There's two China Telecom ROMs I've seen around, 57.1.40 and 57.1.60. They come with different radio.img files I've uploaded at http://www.mediafire.com/?4ovoaba5cxg59
Click to expand...
Click to collapse
As far as I know, there is no root for the 57.1.60 as of a few days ago.
Yes I didn't try to pull the radio.img from the .60 into the .40, but didn't work. I am new to this so I didn't know why.

kew1701 said:
Is this verizon xt862 droid,is the phone still unlocked after flashing to stock rom?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I have not try this so I could not answer your question. Sorry. However, whenever you said "unlocked", it applies to the GSM portion, which I couldn't think of why the stock ROM would re-lock the GSM portion. But again, I don't know.

Bell SBF Found!!

Thanks pfak for finding http://sbf.droid-developers.org/umts_solana/list.php which has a verified legit Bell 2.3.6 sbf available for download.
The OP is here In This Post. Remember to hit the "Thanks" button for him.
Mirrored here http://www.multiupload.nl/D4SZTM40Y9
pfak said:
Bell SBF available at the following URL:
http://sbf.droid-developers.org/umts_solana/list.php
Click to expand...
Click to collapse

Willis111 said:
Thanks pfak for finding http://sbf.droid-developers.org/umts_solana/list.php which has a verified legit Bell 2.3.6 sbf available for download.
The OP is here In This Post. Remember to hit the "Thanks" button for him.
Click to expand...
Click to collapse
That sites has had it awhile but the link isn't easy to find. Can you maybe get this stickied?
Sent from my GT-P5113 using xda premium

Endoroid said:
That sites has had it awhile but the link isn't easy to find. Can you maybe get this stickied?
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Got it's own thread now, no need. I'll add mirrors for the actual file in a bit.
Edit: Mirrors Added, OP Updated. If anyone is having trouble with them and in need of the file shoot me a private message and I'll see if I can shoot you another link but there were at least 8 mirrors on multiupload once it finished propagating.

anyone tried flashing this to xt862? would be nice to have 2.3.6, but wondering whether i'd be stuck on it, unable to get back to 5.7.906.

Q9Nap said:
anyone tried flashing this to xt862? would be nice to have 2.3.6, but wondering whether i'd be stuck on it, unable to get back to 5.7.906.
Click to expand...
Click to collapse
Why would it be nice to have 2.3.6??

DoubleYouPee said:
Why would it be nice to have 2.3.6??
Click to expand...
Click to collapse
just because it's newer than 2.3.4. just compared the 906 cdt with this one; 906 is 04, this one is 02, so it won't even flash. oh well, 2.3.4 is still pretty nice and will have fully functional kexec soon

Q9Nap said:
just because it's newer than 2.3.4. just compared the 906 cdt with this one; 906 is 04, this one is 02, so it won't even flash. oh well, 2.3.4 is still pretty nice and will have fully functional kexec soon
Click to expand...
Click to collapse
I agree, higher numbers = win. I would just copy libmoto_ril.so, my apns-conf.xml and build.prop from my original rom, boot and see what happens and then if I didn't have data/phone I would swap back my original files, wipe data/cache and boot and see what happened, hopefully you would have a fully working bell 2.3.6 on your vzw phone. Let us know.

Thanks for the tip, but if it's not as easy as flashing fxz and radio, not gonna mess around with it.

Q9Nap said:
Thanks for the tip, but if it's not as easy as flashing fxz and radio, not gonna mess around with it.
Click to expand...
Click to collapse
yeah,you might have to do more than click a button... welcome to *nix/android

Willis111 said:
yeah,you might have to do more than click a button... welcome to *nix/android
Click to expand...
Click to collapse
yeah, i might brick my device beyond repair. no thanks. with fully fuctional kexec so close, no point in risking it.

Q9Nap said:
yeah, i might brick my device beyond repair. no thanks. with fully fuctional kexec so close, no point in risking it.
Click to expand...
Click to collapse
i dont see how you will brick your device beyond repair... we've been switching these libs since the beginning with no negative effects and if something does go wrong(the only thing that could possibly happen is a temporary bootloop, until you reflash the sbf) you just use rsd and reflash the bell sbf to have a fully working phone again. If you need more help, need to know which libs, where to put the or permissions etc, anyone can help you, feel free to ask if you decide top give it a try though I think I already posted instructions in a few other threads. I'll look around and update the OP if I find them

tried your bell 2.3.6 rom with libmoto_ril.so and build.prop from 906; persistent "com.motorola.phone has stopped working" error.