Related
Hi all,
So after I flash a new ROM (MIUI MGv2/RC8vC/MGv1) I always hang at the Galaxy S GT-I9000 screen - the first boot screen.
I am wondering what this means? is it a corrupt file, something wrong with my internal sdcard, ROM not installed properly?
Please help,
Thanks.
some times a wipe from recovery will help and goes back to normal boot
many issues may cause this problem for instance if framework.jar or android.policy.jar or... have some bugs , will happen like that
Hi,
By wipe you mean clearing the formatting system, data, cache, dalvik cache and a factory reset? I ask this because the MIUI roms are not are non-wipe and the instructions recommend you to format those places before install (which I did).
I mean wipe cache partition from recovery. just try it and ley us know if it works
Well I just tried again but it doesn't work because I can't access recovery mode. It hangs at the Galaxy S screen and doesn't move from there so I'm wondering why because if I can't fix the bad install then I can't access the recovery mode and can only flash.
if recovery dont work BUT download mode does,
start the whole process again, flash back to stock froyo with froyo bootloader.
did you come to MIUI from Gingerbread ??
Well i've done the process like 10 times, nearly every single time from froyo (JPU,JS5,Ezbase 2.0) and I also went from 2.1 to 2.2 and then to MIUI. The other times I have tried coming from CM7 as CM7 works.
well i have a similar issue but in my case i just wiped my data thru cwm on darky v8 xxjpy..
now i get boot loops,any idea what should i do??
i know this is not exactly the thread but if i get my answer it'll save me from starting a new one..
When I got bootloops i normally reflashed. If you don't have data it will probably work?
I assume you have data as your on Dark v8 when V9 is out?
i dont understand by have data??
i flashed v9.5 but went back to v 8 few months ago..
today i just wiped/factory reset my phone using cwm and it was succesful but now its bootloops and vibrations..
i never wiped my phone before and only have flashed using cwm,never used odin for flashing roms!!
OH I see, by data i meant personal data that you might want to back up...I'm not to most knowledgeable but I know how to flash roms. I reckon you should try to flash V8 it again if you can enter recovery.
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha
scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?
kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App
torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...
Hello, have you tried to download the rom again? Maybe it's a bad download..
That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.
I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?
Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App
Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.
Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.
I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2
Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.
jeet.chaudhari said:
Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.
Click to expand...
Click to collapse
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!
smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.
jeet.chaudhari said:
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.
Click to expand...
Click to collapse
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)
tariqsaleem said:
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)
Click to expand...
Click to collapse
I also tried to doing flash with abyss and speedmod also, but none was successfull, i do not get any error message, but after doing all procedure when i reboot my device, it is started but when paranoid logo appears, it goes in loop, may be this only called as boot loop, i tried 9-10 times doing all this, finally restored GB now, Lets see for solution then i will try again, to flash paranoid android.
When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Ok, Let me try this and check this.
jeet.chaudhari said:
Ok, Let me try this and check this.
Click to expand...
Click to collapse
Unfortunately removing battery for 10 mins, in boot loop didnt help anything, Please help...!
Sir which state are u now?
Sent from my GT-N7000 using xda premium
adamskoc said:
Sir which state are u now?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Currently i am at a state where nothing is working, paranoid, anidroid, all seems like trouble, paranoid stucks at animation, anidroid dont go further than start boot screen.
may be only STOCK GB will be working now. trying that via odin.
The mistake u have done acording to your explanation on paranoid thread on 7 th step after flashing para v5 u again made a full wipe... try gb ... if success start from the beginning...
İf gb stucks on boot go to Recovery wipe cache and under advanced wipe dalvik...
Waiting ....
Sent from my GT-N7000 using xda premium
Any news?
Sent from my GT-N7000 using xda premium
jeet.chaudhari said:
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!
Click to expand...
Click to collapse
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9
Archangel919 said:
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9
Click to expand...
Click to collapse
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.
adamskoc said:
Any news?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for late reply, i am currently on stock GB by the way u said. but still i am not able to use any custom rom.
As i mentioned in last post, may be i need to flash stock rom with repartitions, so now after searching and reading all posts and google i am starting new thread for this strange problem.
Still thank You for your help.
jeet.chaudhari said:
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.
Click to expand...
Click to collapse
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times
Archangel919 said:
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times
Click to expand...
Click to collapse
Thanx Friend,
I have flashed b4 from stock ICS kernal to Anidroid ROM, but now that is not the real problem, now i am on stock GB Rom, which i have installed via Odin, Kindly check http://forum.xda-developers.com/showthread.php?t=1783625 this thread which i have just started, i hope you will understand my problem by looking to this thread, also as i am on GB kernal right now, without rooted, so still i dont need to afraid of EMMC brick bug (I assume it is problem with stock ICS kernals.).
And I had screwed my galaxy bote and had hard bricked my phone , it was gone mate , my phone had almost seem its last days , but i did save it and gave it a new life . Well here is what happened ( again in detail ) - I was KingDroid V2 rom , even when i knew all the ics roms at that time had emmc brick bug , I was fool enough to do a data wipe :crying: , and **** !!!! my phone did boot any rom , i was not even able to flash any rom , not even stock unrooted samsung roms via pc odin . I couldnt even get my phone into recovery mode !!!!!! The only thing that was working on my phone was the download mode !! Thank god !!!!:fingers-crossed: . I tried to re-partition using the original 16GB pit file( as i have 16GB Galaxy note N7000 ) but it was in vain. And then I read some post in XDA developers which mentioned how to RE-ARRANGE the partition.
[ Well I think you don't know what happens when you do a data wipe with emmc bug infected kernel ???? Right ? well here goes an explaination fro that , (i love explaining things to others :cyclops In simple words when you do a data wipe on an EMMC bug infected kernel a part of your internal SD card gets infected , I mean it becomes non-functional , it doesn't respond to read /write commands issued over that sector of internal SD ]
so out of my 16GB internal memory , memory sectors from 1049MB to 2200MB had got corrupted( found it by trial and error method ) , i couldn't use them anymore , so using the adb from the android platform tools , I edited the partitions and shifted the partition corresponding to 1049 MB to 2200MB, and then flashed abyss note kernel and then checkrom revo HD :fingers-crossed: . Viola my phone booted , I had got over the hard brick , but my internal storage had reduced to 10 Gb instead of 11 Gb due to unresponsive sectors in internal memory !!!
Next i did a reset of the flash counter and removed the yellow triangle and flashed the stock gingerbread rom (Indian version , where I am from ) via pc odin and it got stucj at FactoryFS stage , as expected !!!! . Next I handed it to Samsung service center and just told them that i was trying to update to ICS via kies and it got stuck . After few days they replaced my phone's motherboard for free :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
My friend i think your prob started while flashing paranoid rom u said that after flashing rom u made a full wipe... so i think u lost your root... just an idea
İf u can find a prerooted gb rom or u can root your gb rom u can flash paranoid rom
Sent from my GT-N7000 using xda premium
Hello everyone
My phone isnt working turning on , its stuck on the samsung logo !
I was using Ultimate jb rom when suddenly my phone turned off and it was stuck on the samsung logo , i tired flashing the another rom Angry v3 4.1.2 at first it the phone turned on and then the same happened , after that i tired flashing to stock ICS and now its again stuck on the samsung logo , what should i do now ? Please help asap
Thanks in advance
Have you tried to flash back with Odin PC?
Kortxero said:
Have you tried to flash back with Odin PC?
Click to expand...
Click to collapse
Yeah i flashed stock ICS using pc odin !
xp3rto said:
Yeah i flashed stock ICS using pc odin !
Click to expand...
Click to collapse
You should use a wipe stock ROM when flashing through Odin.
Since struck at logo, battery may be ok, nevertheless as a blind shot, why don't you try with another battery.
Sent from my GT-N7000 using xda premium
after installing the ICS rom, install a safe kernel and do a factory reset, wipe cache and dalvik.
dont you have any nandroid backups?
i have this problem b4
try flash safe kernel (example hydracore), reboot
then go to download mode flash any type of ROM
and do a factory reset, wipe cache and dalvik
pods71 said:
i have this problem b4
try flash safe kernel (example hydracore), reboot
then go to download mode flash any type of ROM
and do a factory reset, wipe cache and dalvik
Click to expand...
Click to collapse
If you install ICS, the its not safe to do a wipe till you install a safe kernel...
Thanks for the help everyone The phone turned on finally after doing this
nokiamodeln91 said:
after installing the ICS rom, install a safe kernel and do a factory reset, wipe cache and dalvik.
Click to expand...
Click to collapse
Thanks everyone
Happy New Year !!
xp3rto said:
Thanks for the help everyone The phone turned on finally after doing this
Thanks everyone
Happy New Year !!
Click to expand...
Click to collapse
having the same issue right now.. i rooted my stock rom, and used speedmod 15 version. This morning the screen started flickering and occasional power offs. Then the battery reading was incorrect - first 60%, then it went to 65%. After a restart it went to 12% after which I just recharged the phone as usual. No problems until this evening again it went bad and couldn't restart. I can however restart in CWM recovery and luckily have a NAND backup and Titanium backup of everything that is important to me.
I also managed to recover the /sdcard partition with adb pull command. Right now the phone will not boot past the startup animation. I already tried CM 10.1 31.12 nightly and also 9.1 stable, and have the exact same issue.
Anyone know how to fix this except for wiping? Because I already wiped everything while trying the CM builds.
First check if the battery is good. Also try a different battery.
Also this time installing the rom, try in cwm, mounts & storage, format/system, format/data, format/cache and then flash the rom
Sent from my GT-N7000 using xda premium
just a quick update, I ran in recovery mode and did an fsck on the 9 and 10 partitions, i got a lot errors that got "fixed" by fsck. After that I just reflashed the CM10.1 nightly and it made it past the boot screen. Not for long though. After restarting it didn't get past the boot screen again.
I gave up yesterday night and just started downloading the latest official GB. This morning I flashed it with odin and it kind of worked, until i got force closes in the wifi settings step of the setup wizard.
Now it boots into android but doesn't get past the wizard screen. I will try flashing the GB rom once more through odin, maybe that fixes some things.
any other suggestions? If it is the battery, would it make any difference if it was plugged into the wall charger while starting the phone?
---------- Post added at 12:27 PM ---------- Previous post was at 12:03 PM ----------
another update: I did a factory reset on the GB rom and am using it while connected to the wall charger. It seems to be working OK like this. So I guess I need to find a battery and try to restore my apps and settings
Another update, I ordered a brand new genuine battery and now it seems to work stable again. I just used it as a mp3 player and to surf for a few hours and no instability issues anymore, boots up perfectly.
Original battery was dated november 2011. The new one (also genuine samsung) is from october 2012 I believe.