Hey, any1 might have a clue why i cant enter bootloader?
vol- + power equals normal start
im using deepshining 6.1 if it makes any difference
Majuu said:
Hey, any1 might have a clue why i cant enter bootloader?
vol- + power equals normal start
im using deepshining 6.1 if it makes any difference
Click to expand...
Click to collapse
Using Deepshining myself since yesterday (v7 though) and I just tried what you said.
However I "think" I know your issue, if you try to press both at the same time (volume button down + power button) you might end up with just booting the device normally cause you hit the power button first.
Just try this: shut down the phone --> press & hold the Volume Down button --> press the power button. The phone should then just boot in bootloader (at least for me)
That's all I can think off but im no programmer. Hope it works!
Related
Help me please guys I can not make a hard reset or flash a new ROM with the sd card method. (right volume button and power button). also hard reset doesn't work. (press both silver button and power button).
before always its OK but now i only flash with usb method.
thanks a lot
Can you still hard reset using |START|SETTINGS|SYSTEM|CLEAR STORAGE|?
What rom and SPL are you using?
You might need to Hard-SPL again.
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
the banished said:
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
Click to expand...
Click to collapse
Are your xperia volume keys working properly because it can be hardware issue....
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Fulgore69 said:
Are your xperia volume keys working properly because it can be hardware issue....
Click to expand...
Click to collapse
I test de volume keys and work fine
the banished said:
I test de volume keys and work fine
Click to expand...
Click to collapse
Are you using volume down?
Turn the phone off, hold volume down (and keep holding) then turn the phone on. Make sure it isn't connected to your PC when doing this.
Edit: Does it enter the bootloader correctly when you are using the Rom Update Utility?
jhendra said:
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Click to expand...
Click to collapse
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
the banished said:
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
Click to expand...
Click to collapse
Flash back to an earlier rom, HardSPL again and see if you can enter the bootloader and hard reset using the key combinations.
Whats ROM recommend me for this problem Buzz
the banished said:
Whats ROM recommend me for this problem Buzz
Click to expand...
Click to collapse
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
buzz83 said:
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
Click to expand...
Click to collapse
Great info thanks I will Read
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
the thing is:
if you want to go into the bootloader you need to press and hold the power button and the volume button down untill you get into the 3coloured screen.
exactly thats is all i want but a can't
all The keys (Volumen, Power, silver keys) Works Fine in Windows Mobile. but i can not make hard reset with the silver keys and button power. or worse i can not enter to the bootloader mode with volume key and power key.
before all its ok but now its like the keys dont work at the start.
to do a hard reset I just keep holding both softkeys and then I press the reset button with the stylus.
try it this way.
the banished said:
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
Click to expand...
Click to collapse
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
buzz83 said:
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
Click to expand...
Click to collapse
I think the same. I try to search and Search but my english i not the best and is a double job. jeje.
Thanks a lot for the help Buzz I keep search any solution.
And as they say in Spanish forums if you dont find the the answers in XDA you dont find on any page
Ok, i promise i did nothing...im holding the volume and power button...(volume first, then the power button) but the phone keeps staring..i last installed Chritian's ROM....wht is wrong....
circleofomega said:
Ok, i promise i did nothing...im holding the volume and power button...(volume first, then the power button) but the phone keeps staring..i last installed Chritian's ROM....wht is wrong....
Click to expand...
Click to collapse
And you are holding volume ''DOWN'' ?
turn the phone OFF.
hold volume down key, while still holding volume down, hold power key...
Continue holding both keys until you get the tri colour SPL screen....
Could be the volume key isn't working as it should, some others have had that problem.
Try using the RUU tool and flashing through USB cable.
circleofomega said:
Ok, i promise i did nothing...im holding the volume and power button...(volume first, then the power button) but the phone keeps staring..i last installed Chritian's ROM....wht is wrong....
Click to expand...
Click to collapse
Just copy the file inside the archieve to your SD card and then run it from file explorer in the phone, it will restart in bootloader then
Once again, a flashing thread already exists for questions like these. Its even been stickied for quick finding. Why not post in that thread??
Thread closed
Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.
bollix said:
Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.
Click to expand...
Click to collapse
Power your phone off, push and hold volume down, then hold power button as well and hold it for a few seconds. Then you ll reboot to recovery or simply boot the phone, hold the power button, choose reboot, in the next menu choose boot recovery and done.
Sent from my LG-P970 using xda app-developers app
Doesnt work for me, i need combo to get recovery without booting my system, because my CM10.1 is broken and wont boot..
try to connect to an usb cable
felipelluna said:
try to connect to an usb cable
Click to expand...
Click to collapse
doesnt work.
simple use SFT.
there is PBR (iirc, pseudo-boot recovery, button combo to enter recovery, cmiiw) on cm10. I think cm10.1 also has it.
turn on the phone, focus on led button, when it start blink for the first time press volume down + power button. You should press it at the right time to make it work. Tried it couples of time.
thank you, it works!
bollix said:
thank you, it works!
Click to expand...
Click to collapse
iI just saw that it work onjy on GB roms and cm10 cm10.1
I guess it is about bootloader, I don't know exactly!
I tried it on STOCK ICS 4.0.4 (Nemesis) and it dind't work for me.
I just flash a new firmware and TWRP touchscreen is not responding.
Is there anyway i could force shut down the phone?
I have already tried the following:
- adb reboot bootloader
Got an error device not found
- hold down power button for more than 10sec
- hold down both power button and vol button for more than 10sec
All the above methods doesnt work
turtleism said:
I just flash a new firmware and TWRP touchscreen is not responding.
Is there anyway i could force shut down the phone?
I have already tried the following:
- adb reboot bootloader
Got an error device not found
- hold down power button for more than 10sec
- hold down both power button and vol button for more than 10sec
All the above methods doesnt work
Click to expand...
Click to collapse
Try this one
go to a place where there is enough bright light ..and then hold on to the power button for more than 10sec
Harish_Kumar said:
Try this one
go to a place where there is enough bright light ..and then hold on to the power button for more than 10sec
Click to expand...
Click to collapse
yeah! it really works, before i saw this reply i was still desperately googling for fix and i came across this thread:
http://forum.xda-developers.com/showthread.php?p=41800036
:good::good:
Hello All,
I for some reason cannot figure out the button combo to get me into recovery from the phone being off. Anyone know what it is? Thanks!
Best,
RC3
RCantw3ll said:
Hello All,
I for some reason cannot figure out the button combo to get me into recovery from the phone being off. Anyone know what it is? Thanks!
Best,
RC3
Click to expand...
Click to collapse
You'll find the directions here: http://wiki.cyanogenmod.org/w/D802_Info
RCantw3ll said:
Hello All,
I for some reason cannot figure out the button combo to get me into recovery from the phone being off. Anyone know what it is? Thanks!
Best,
RC3
Click to expand...
Click to collapse
Hold power and vol down until it turns on and once it gets to the lg logo, release the buttons and press and hold them again until it gets to the factory reset screen. Hit the power button three times and it will boot into your recovery
Sent from my Vs980 Running LiquidSmooth
Thanks fellas!
The phone has to be powered OFF for the stated and linked methods to work for recovery access.
To power the phone off (if, say, you're stuck in a bootloop),
Press and hold the power and Vol- buttons for 10 seconds do not release, hold for an additional 3-5 seconds. The LG logo will flash briefly. When the screen is black, let go of all buttons. Now the phone is off, you may process to use the previously stated commands to enter recovery.
Hold volume down + power until the LG logo appears....once it appears release the power button and repress it and hold until youre into recovery... :good: