Database Develop

[KERNEL][ICS][02-10-2012]SuperICS kernel v2.0.1 Beta

Hi all,
I present you superatmos kernel for ICS. Its built using ICS kernel sources released by samsung.
NOTE: *** WORKS ONLY ON SAMSUNG BASED ROMs. DOESN'T WORK ON AOSP BASED ROMs LIKE CM9 and MIUI. ***​
DISCLAIMER: I don't bear any responsibility if you brick your device flashing this kernel. Flash it at your own risk.​
Instructions for flashing:
Download the tar file from the link given below.
Flash it using Odin.
Download Link:
BETA VERSIONS:
SuperICS Kernel v2.0.1 (Everything works except bluetooth. Almost stable release.)
SuperICS Kernel v1.0.3
STABLE VERSIONS:
SuperICS Kernel v1.0.2(Thanks to incarnation95 for testing)
SuperICS Kernel v1.0.1 (Thanks to yogisays09 for testing)​
Kernel Features:
Built from ICS kernel source released by samsung
Clockwokmod Recovery 5.5.0.4(v1.0.2)
CWM Touch Recovery 5.8.1.5 (v1.0.3)
Added a lot of governors and I/O schedulers(letting users decide which combination is better for them)
Faster memory read and write operations
Misc tweaks for faster I/O access and battery saving
Completely CF-root compatible(CWMManager.apk auto install) (Credits and THANKS TO Chainfire.)
Disabled MMC_CAP_ERASE capability flag (Thanks and Credits to codeworkx)
efs partition backup(you can find the backup in /data/superatmos folder)
Custom bootanimation(copy bootanimation.zip to "/data/superatmos" folder and reboot) and Custom bootsound(copy "PowerOn.wav" to /data/superatmos folder and reboot). (superatmos folder can be seen now in /data once you flash the kernel)
init.d script support (put your boot scripts in /system/etc/init.d or /data/etc/init.d folder)
Additional modules support (copy your .ko files to /system/lib/modules or /data/lib/modules and reboot)
Custom boot scripts support (copy your custom boot scripts to /data/customboot.sh and reboot)
Improved kernel performance.
CIFS module added
FUSE and NTFS file systems integrated with kernel
VERY STABLE
Kernel Source: HERE​
Credits: I would to like to say thanks and give credit to all people who directly or indirectly helped me technically to become what I am today. Special thanks to Chainfire and codeworkx. They are just awesome and great inspiration.​
Screenshots: (Courtesy: incarnation95)​​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

test ker
[email protected]

Thank you!
I would like to test your SuperICS kernel.

I would like to test your SuperICS kernel.

Check your PM.

Rdy Tor testing this !
[email protected]
Sent from my GT-I9100G using xda premium

Lets rock ......
Sent from my GT-I9100G using xda premium

Looks like kernel is working fine.. will try to add few more tweaks/optimizations and release it.

are there governors included such as abyssplug?

iXanza said:
are there governors included such as abyssplug?
Click to expand...
Click to collapse
Will try to add in the first version.. if not in the next one

willing to test!

this kernel got loop back device support...cos i wanna use linux on my G.. :O

time to boost!!!

Waitin fr tge release... Gnna be awesome B-)
Sent from my GT-I9100G using Tapatalk

I would like to test too
Gesendet von meinem GT-I9100G mit Tapatalk 2

i wan to test for u oso..can i?

SuperICS kernel v1.0 released
Hi all,
SuperICS kernel released. Check the OP.
Please test the kernel and reply the feedback/bugs here.
Also it will of great help if someone can provide screenshots of About Phone in settings and of CWM app.
Thanks to all my BETA testers.

hey superatmos,does this kernel got loop back device support..???

Hey, does this Kernel improve the 3D Performamce, that we can get as same fps as in CM 9?
Gesendet von meinem GT-I9100G mit Tapatalk 2

Hariiii said:
hey superatmos,does this kernel got loop back device support..???
Click to expand...
Click to collapse
In the defconfig, loopback device support is enabled by default.

[Q] [KERNEL]2.3.4 overclock

Kernel for 2.3.4
Program for overclock SetCPU,CPU master
V1
Add overclock gpu 240Mhz(Does not work)
V2
Add overlock cpu 120-1300Mhz(stable)
V3
Off LG DVFS
Add swap init.d
V4
Source kernel 20Q
Add Smartass v2
Add SIO I/O Schedulers
Next version
Update EXT4
Overclock to 1370Mhz
Overclock GPU 220MHZ
Scheduler bfq
Installing a recovery

Nice! Waiting for that 1370mhz OC !

tested and working
1.3 GHz OC is stable. Confirmed for :
1. Supressed ROM series
2. PRADA ROM series and
3. SAPPHIRE ROM series.
good work. however, i cannot comment yet on battery consumption and heat.
gotta use it a bit more for these and any related instability.
thanks.

This kernel based on Gingerbread Official kernel or CM7 kernel?
(Seeing as they have only been tested by @achyut)

Works on all roms ?
EDIT: with 2.3.4

FunkyGanja said:
This kernel based on Gingerbread Official kernel or CM7 kernel?
(Seeing as they have only been tested by @achyut)
Click to expand...
Click to collapse
U got answer in first post.:banghead:

This kernel is not so good on the optimus max rom because I have make a full benchmark with quadrant and antutu and I got 870 and 2100 so it's under the stock rom score

it is can for CM7 based? the information not clear for what this kernel stock or CM7? thanks.

I dnt know about this .. i have xeus 6.3n rom and the kernel i havent toutched yet.. can some one explain . Thnx
Sent from my LG-P970 using xda premium. If I Helped You, Hit The Thanks Boutton. Jesus !!

puisicintaqu said:
it is can for CM7 based? the information not clear for what this kernel stock or CM7? thanks.
Click to expand...
Click to collapse
Yes it is clear. CM7 use kernel 2.3.7.
This is 2.3.4, which is stock kernel

ok i install this kernel on zeus 6.3n. i know, that was madness.
seem to work, lg bootup, but when i switch screen on home screen, was laggy,even how to set the 1300 MHz which cpu master.
test in Quadrant in 5 round per row show only max 1056 points.
I tested about 20 minutes, so the more I can not tell
sry for my bad english

marius987 said:
ok i install this kernel on zeus 6.3n. i know, that was madness.
seem to work, lg bootup, but when i switch screen on home screen, was laggy,even how to set the 1300 MHz which cpu master.
test in Quadrant in 5 round per row show only max 1056 points.
I tested about 20 minutes, so the more I can not tell
sry for my bad english
Click to expand...
Click to collapse
Can anyone confirm this?
Is it really working that bad under Zeus 6.3?

It works fine over V20O and Q as far as i tested no heating but more speed!

i can confirm this kernel is good enough for me.
scaling/governor: performance;
I/O scheduler: sio
check the CPU SPY screen shot.
the cell mainly stays on the minimum scaling when not used, which is very essential for the battery.
overall, the performance is snappier than stock (obvious thing)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

whenever i am tryin to OC on the default kernel of Suppressed ROM...it doesnt work...whenever i slide the MIN CPU to 1000Mhz using SetCPU, the CPU becomes 300Mhz and i had to pull the battery out to reboot then slide it back to default MAX 1000Mhz and MIN 300Mhz..
so does this kernel like really solves this problem? and how do i install it?

CalamitySir said:
whenever i am tryin to OC on the default kernel of Suppressed ROM...it doesnt work...whenever i slide the MIN CPU to 1000Mhz using SetCPU, the CPU becomes 300Mhz and i had to pull the battery out to reboot then slide it back to default MAX 1000Mhz and MIN 300Mhz..
so does this kernel like really solves this problem? and how do i install it?
Click to expand...
Click to collapse
flash it via recovery....the screenshot is from supressed rom.

achyut said:
flash it via recovery....the screenshot is from supressed rom.
Click to expand...
Click to collapse
I can also confirm it works flawless on Noa .

does the V4 have the V3 fix? sorry this might be a stupid question but just wanna confirm it...

CalamitySir said:
does the V4 have the V3 fix? sorry this might be a stupid question but just wanna confirm it...
Click to expand...
Click to collapse
yes it has.

How's Smartreflex and MPU? You can check via dmesg. If something shows "hub_opp_init: MPU does not support XXXX MHz" then you have a problem. frequencies may show but there would be complications on voltages.
The slowness is via DVFS IMO. better use init.d, "scaling_max_freq" for OC.

[Q] Sleep of death in gingerdx v030

Someone's having the bug "sleep of death" with gingerdx v30? In v29 worked perfectly
PS: I'm using Alfs v09c CM7

fps_fan said:
Someone's having the bug "sleep of death" with gingerdx v30? In v29 worked perfectly
PS: I'm using Alfs v09c CM7
Click to expand...
Click to collapse
sometimes i've had that with gdx v29 too. I presume it depends by a some different factors...

kust0r said:
sometimes i've had that with gdx v29 too. I presume it depends by a some different factors...
Click to expand...
Click to collapse
I have same experience as you...
I'm on stock kernel
sent from.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

For me in v029 it did never happen (tried with v09a and v09c)... In gingerzaraki final also never happened (push the button and the screen does not turn on instantly).
But it often happens in v030, returning to gingerzaraki... Simple and fast :laugh:

What is sleep of death btw????

HemdonG said:
What is sleep of death btw????
Click to expand...
Click to collapse
According to the name....
Screen goes off & never come back...
No matter what u do until pull the battery out
sent from.......

haven't tried gdx 30 YET. but i've experienced the wake up bug on some jb roms. now the problem may have different causes, but have you guys tried staying on ondemand governor? or setting a higher min frequency on cpu? like i said, it's probably not going to work, but it's worth a try.
[cAs]

People having this problem can try the next flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1667297&d=1358875962 .
As I've explained before in the GingerDX thread ( http://forum.xda-developers.com/showpost.php?p=37044702&postcount=12246 ), at least in stock kernel, the PERFORMANCE governor is the default and it is reverted back as the default after each reboot, you can change it in the Performance menu but it will not pick up the values set in hw_config.sh.
For those of you who are with a custom kernel, you can check this by going to the Performance menu and entering CPU Settings. If PERFORMANCE is selected as the governor and you haven't touched this, it means that the custom kernel version has the same problem as the stock one.
Why does this matter? This might have something to do with the phone not being able to come out of deep sleep. So you can try the flashable zip. It basically guarantees that ONDEMAND is selected as the default governor with the values that have been working for our phone.

Fortun said:
People having this problem can try the next flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1667297&d=1358875962 .
As I've explained before in the GingerDX thread ( http://forum.xda-developers.com/showpost.php?p=37044702&postcount=12246 ), at least in stock kernel, the PERFORMANCE governor is the default and it is reverted back as the default after each reboot, you can change it in the Performance menu but it will not pick up the values set in hw_config.sh.
For those of you who are with a custom kernel, you can check this by going to the Performance menu and entering CPU Settings. If PERFORMANCE is selected as the governor and you haven't touched this, it means that the custom kernel version has the same problem as the stock one.
Why does this matter? This might have something to do with the phone not being able to come out of deep sleep. So you can try the flashable zip. It basically guarantees that ONDEMAND is selected as the default governor with the values that have been working for our phone.
Click to expand...
Click to collapse
So after flashing your zip..
Deep sleep problem will be solved??
sent from.......

Gogeta said:
So after flashing your zip..
Deep sleep problem will be solved??
Click to expand...
Click to collapse
I can't guarantee that.
The X8 here never had that problem and it's running with the script that's inside the flashable zip. So, as I said, it might solve the issue.
What I can guarantee is that, at least for stock kernel, the intended governor with its intended values will be loaded. That's not the case with the latest release of GingerDX. The values are there, but they're not loaded correctly.

I had deep sleep only when screen was off and I pluged in charger. Gdx v30 + alfs 9c

What cpu gouvernor are you using ?
Sent from my Nexus 7 using xda premium

I tried settind the governor on ondemand & checked 'set on Boot' in cyanogen mod settings & after reboot it wasn't reset to performance
It was still ondemand
sent from.......

Mockingbird said:
What cpu gouvernor are you using ?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I made no change performance in CyanogenMod settings, did not check what was the governator and native frequency, but I am back to gingerzaraki in this i never had this problem =D I did proper installation on v030: full wipe, rom (the same kernel v09c), libsensors and gapps

Gogeta said:
I tried settind the governor on ondemand & checked 'set on Boot' in cyanogen mod settings & after reboot it wasn't reset to performance
It was still ondemand
Click to expand...
Click to collapse
As I've explained in the GingerDX thread, you can do that but the values for the governor won't be loaded. What values? These:
Code:
echo 80 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
echo 40 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/down_differential
echo 400000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
echo 122880 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
They're present in the hw_config.sh and are expected to be loaded at boot, as ONDEMAND is. They don't. They slightly modify how the governor behaves for our phone.
Having said that, just changing ONDEMAND as the governor via CyanogenMod Settings might do the trick.

*[4.1+]*[MOD]BATTERY TWeaKS [get the best out your Battery]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements
REQUIREMENTS
Most importantly your phone
init.d support
Android 4.1+
what's in init.d scripts?
4.1 cpufreq_governor
21cpufreq_governor script sets the governor that contorls the CPU's thresholds and sampling_rates
4.2 cpufreq_screenstate_scaling
31cpufreq_screenstate_scaling script defines the governor values and decides the actions based on the phone's state - conservative, ondeman, lazy, awake, sleep modes. I've changed lots of values from Calk's original script to save more battery power thru this script. As indicated in Calk's original thread for FD02, this script would not run if you have already installed some CPU control apps something like OC Widget, Quick Clock, SETCPU, and Android OC.
4.3 tweaks_kobridge
41tweaks_kobridge script has almost everything in it to improve the network speed, sdcard tweaks, other battery saving tweaks, VM management, Kernel, wifi tweaks, etc. For some of the values in here, there are some overlaps with build.prop tweaks. So, if you do not apply the tweaks to the build.prop file, many tweaks would still work.
4.4 zipalign
zipalign is an archive alignment tool introduced first time with 1.6 Android SDK (software development kit). It optimizes the way an Android application package (APK) is packaged. Doing so enables the Android operating system to interact with the application more efficiently, and hence has the potential to make the application and overall the whole system much faster. Execution time is minimized for zipaligned applications, resulting is lesser amount of RAM consumption when running the APK.
If less number of applications with an unaligned home application, you’d see slower application launch times. This is the best case scenario. For a worst case scenario, having a number of unaligned applications will result in the system repeatedly starting and killing processes, struggling with lags and huge battery drain.
4.5 Wifi Sleep Wait timer
What this tweak does is, it controls the time until wifi sleeps after the screen turned off. By default, it's 15 minutes. So, even you turned off the screen, by default, phone will wait for 15 minutes and then turn off the wifi. By using this tweak, you will have the control over wifi idle time until wifi sleeps.​
credits
me
kobridge
iossux

Reserved for GB and ICS tweaks

Tested On Carbon & SJB

how to use?
THEKING said:
Tested On Carbon & SJB
Click to expand...
Click to collapse
have to flash it thru CWM? and then wt about wipes?

.
wasim9283 said:
have to flash it thru CWM? and then wt about wipes?
Click to expand...
Click to collapse
Flash it through CMW & no wipes required

THEKING said:
Flash it through CMW & no wipes required
Click to expand...
Click to collapse
is that we need to delete all the files in the init.d folder first then only flash with CWM? OR just flash through CWM only and no need to delete the files in init.d?

direct
WaterMelon90 said:
is that we need to delete all the files in the init.d folder first then only flash with CWM? OR just flash through CWM only and no need to delete the files in init.d?
Click to expand...
Click to collapse
directly flash it :good::good:

4.2.2 loopboot kernel lupus :crying: how remove tweak please:crying:

phones were standing at the boot screen.

nova_vn said:
phones were standing at the boot screen.
Click to expand...
Click to collapse
Flash rom again with clean install
Sent from my Xperia Live with Walkman using xda premium

aromaFM
nova_vn said:
4.2.2 loopboot kernel lupus :crying: how remove tweak please:crying:
Click to expand...
Click to collapse
use aroma file manager and delete all files in init.d folder

gauravj said:
Tested On Carbon & SJB
Click to expand...
Click to collapse
you mean ROM carbon KK?

[KERNEL] G903F Optimized Kernel

Hi guys.
Here i share my custom Kernel for the S5 Neo.
For now i enabled default governors (conservative, ondemand, powersave & performance).
I added conservativex governor (to test how this works). Change them with Kernel Auditor
SELinux is Permissive.
Usually I'm developing PHP-Webapps but now i try my skills in Android Kernel Developement.
Next i want to add some more governors, I/O Shedulers and maybe something like FauxSoundControl, update the Kernel Source and so on.
Try it at your own risk, flash through TWRP:
Downloads
v0.4 is the newest
https://dev.chillkroete.at/Android/G903F-kernel/
Source can be found at
https://gitlab.pm-host.at:8443/patrick/custom_kernel_s5neolte/tree/android-5.1

Changelog:
v0.4 - 20.01.2016
Add wheatley & lionheart governors, ondemand is now default
v0.3
Added some Governors
v0.2
Built from TWRP Source, Selinux Permissive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thank you very much )) will try it.
SM-G903F waiting for Optimised Kernel

"CHILLKROETE" - der Tag ist gerettet
flashing right now

I will try it!
Edit: can't open link
Gesendet von meinem SM-G903F mit Tapatalk

NotGrump903 said:
I will try it!
Edit: can't open link
Gesendet von meinem SM-G903F mit Tapatalk
Click to expand...
Click to collapse
Uploaded v0.3 on another server
http://www33.zippyshare.com/v/gwMFIuqg/file.html

zwieblauch said:
Hi guys.
Here i share my custom Kernel for the S5 Neo.
For now i enabled default governors (conservative, ondemand, powersave & performance).
I added conservativex governor (to test how this works). Change them with Kernel Auditor
SELinux is Permissive.
Usually I'm developing PHP-Webapps but now i try my skills in Android Kernel Developement.
Next i want to add some more governors, I/O Shedulers and maybe something like FauxSoundControl, update the Kernel Source and so on.
Try it at your own risk, flash through TWRP:
Downloads
v0.3 is the newest
https://dev.chillkroete.at/Android/G903F-kernel/
v0.3 on zippyshare
Source can be found at
https://gitlab.pm-host.at:8443/patrick/custom_kernel_s5neolte/tree/android-5.1
Click to expand...
Click to collapse
I'm already testing it. It's good for now. Haven't experienced any problem or glitch. Only problem is that somehow I get a pop-up notification from Knox that there has been an unauthorized modification of the system, and I wanna get rid of it, it appears with a triangle, it's not persistent but it pops up pretty often.

chris-t-an said:
I'm already testing it. It's good for now. Haven't experienced any problem or glitch. Only problem is that somehow I get a pop-up notification from Knox that there has been an unauthorized modification of the system, and I wanna get rid of it, it appears with a triangle, it's not persistent but it pops up pretty often.
Click to expand...
Click to collapse
To remove the security notification, use App Disabler and disable "SecurityLogAgent".

It would be great if you can enable init.d support too please. FauxSound is good to hear
Thanks.
SM-G903F waiting for ...

zwieblauch said:
To remove the security notification, use App Disabler and disable "SecurityLogAgent".
Click to expand...
Click to collapse
ondemand and works flawless ☺
i think app disabler wont help?

kaodd said:
ondemand and works flawless ☺
i think app disabler wont help?
Click to expand...
Click to collapse
You can disable security notifications with wanam
Gesendet von meinem SM-G903F mit Tapatalk

Yep. But something begin to make me angry. More and more games consider xposed like hacking and the game does not want to start due to security notice....
Envoyé de mon GT-I9505

WILMANS2M said:
Yep. But something begin to make me angry. More and more games consider xposed like hacking and the game does not want to start due to security notice....
Envoyé de mon GT-I9505
Click to expand...
Click to collapse
Maybe use an xposed module like RootCloak to hide root & xposed from those apps.
Sent from my SM-G903F using Tapatalk

uninstall with TB
Governor "miracle": tonight it was ondermand - in the morning it is interactive ?
I switch the phone to flymode every night and tonight i've got forceclosed?
I'm a fan of ZZmove using Boeffla kernel since S2 times. maybe it is possible to ad zzmove?

Found out that since i freezed "com.sec.enterprise.knox.attestation 1.0.1" with TB, everything works as expected Nice kernel!
Gesendet von meinem SM-G903F mit Tapatalk

Excuse my "Newbie"Question, but how do i install the Kernel?
Do i have to install this first?
https://twrp.me/devices/samsunggalaxys5neoexynos.html
thx anyway and regards

last night I left the phone with no apps running and 43% battery and in the morning I found it switched off and in a boot loop with the S logo and "SE linux not enforcing" or something alike. I booted in twrp and luckily I had a full backup from the day before yesterday so I restored the boot. Should have been selected wipe dalvik cache after flashing the kernel?

every time you flash something dalvik should be wiped
Gesendet von meinem SM-G903F mit Tapatalk

homsersf said:
Excuse my "Newbie"Question, but how do i install the Kernel?
Do i have to install this first?
https://twrp.me/devices/samsunggalaxys5neoexynos.html
thx anyway and regards
Click to expand...
Click to collapse
yes, you need to install TWRP with Odin
after install
-boot to TWRP Recovery with VOL+ , POWER & HOME keys
-go to backup and make a backup at least from boot partition,
-go to install and select the downloaded file.
-install it and wipe dalvic+cache
-reboot

@zwieblauch ty for the kernel I'm trying to let your kernel be known by more s5 neo users so I'm writing it in the root thread ...for sure if it's only ok for you