Hi, I'm new here, new as registered but I've been reading this forum a long time, but well, here is my problem.
I was following a tutorial to exchange my external sd card for my internal sd card, so I could install there anything I wish, but I screwed it!
One step of that tutorial was erase the information of the vold.fstab file located at /etc and later rewrite with another, exactly this:
Original vold.fstab file
## Vold 2.0 NVIDIA Whistler fstab
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## 20100725, [email protected], Add 2nd external memory
dev_mount extsdcard /mnt/sdcard/_ExternalSD auto /devices/platform/tegra-sdhci.2/mmc_host/mmc1 /devices/platform/tegra-sdhci.2/mmc_host/mmc0
dev_mount sdcard /mnt/sdcard auto /devices/platform/tegra-sdhci.3/mmc_host/mmc2
Moded vold.fstab file
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
dev_mount sdcard /mnt/sdcard auto /devices/platform/tegra-sdhci.2/mmc_host/mmc1
dev_mount extsdcard /mnt/sdcard/_ExternalSD 9 /devices/platform/tegra-sdhci.3/mmc_host/mmc2
I did it from my device, and after reboot, I couldn't open camera, gallery, and the most important thing, now my device doesn't read internal or external SD card, so I can't do anything, my question is How can I manage to get the original vold.fstab file, I tried editing it and paste the original vold.fstab information, but that doesn't work, and I haven't done a backup either...
PS: Sorry for my bad english
PS2: I'm a dumb
PS3: Thanks for reading!
I had similar issue with my other phone. I had two choices - reinstall ROM in CWR or place vold.fstab in /system/etc throught ADB. I don't know if it will help you.
PykaTux said:
I had similar issue with my other phone. I had two choices - reinstall ROM in CWR or place vold.fstab in /system/etc throught ADB. I don't know if it will help you.
Click to expand...
Click to collapse
I thought that if I could get another vold.fstab file and paste in the /etc I would fix the issue, but I can't connect the mobile to the pc and I can't download files from my device either, so what is ADB and how can I put a vold.fstab file again using just the device? Thanks ^^
My phone is trash now I guess...
Just flash stock ROM with nvflash or smartflash
i lost my original vold.fstab. how can i solve it ? anyone ?
Same situation here ;( I replace the moded vold.fstab but it didn't work. Also, I haven't done a backup.
So, how can I replace the original vold.fstab?
Android MIUI Rom
knowing which rom + OS you're on might help.
I tried ADB before and I replaced the original vold.fstab but the sd card is still not available.(USB debug mode)
Here's my steps:
cd c:\SDK\tools,
adb devices,
adb remount,
adb push ./"vold.fstab" /system/etc
Any wrong step? Or any more solution? PLEASE HELP ME!!!
Android MIUI Rom
Sounds like ur on Windows. That's basically what i wanted to know.
Do
Code:
adb push vold.fstab /system/etc
sry for doublepost, i failed.
It doesn't work as usual, anyway thanks.
I reflash a rom, and thats work.
Related
Was on the Lanlight Alpha when my sdcard became corrupted, now flashed to AOKP. Figured that it has nothing to do with the ROM, but more so JB itself and how our phone handles the sdcard when on it. Now have to use my external as my internal, but by doing this my camera app won't start up, saying "there is no external storage present." Tried editing my vold.fstab, but I guess I'm doing it incorrectly because it would just stick onto the loading screen when booting up and would never move on.
vold.fstab looks like this
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#FIXME: Swap again?
# internal sdcard
dev_mount emmc /storage/sdcard1 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount sdcard /storage/sdcard0 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
Click to expand...
Click to collapse
Hi,
recently I bring back to life my SGS I9000 with broken Internal chip.
This all was possible through this video: http://www.youtube.com/watch?v=zdMhYYdMB08
Now I have two partitions 2GB (system-Android) and 6GB to use as SD Card
The problem is there... If I edit the vold.fstab file as in the video, I can't boot my phone anymore it just stays in CyaogenMod.
Now I need help from you to tell me how to edit my vold.fstab file
There is the original one I just copied it from /system/etc
May you edit it for me?
Thank you everyone.
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount sdcard /mnt/emmc 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# external sdcard
dev_mount emmc /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Nobody?
I though this was a frequent forum???
Still waiting
Sorry to ditrub
agronn19 said:
Hi,
recently I bring back to life my SGS I9000 with broken Internal chip.
This all was possible through this video: http://www.youtube.com/watch?v=zdMhYYdMB08
Now I have two partitions 2GB (system-Android) and 6GB to use as SD Card
The problem is there... If I edit the vold.fstab file as in the video, I can't boot my phone anymore it just stays in CyaogenMod.
Now I need help from you to tell me how to edit my vold.fstab file
There is the original one I just copied it from /system/etc
May you edit it for me?
Thank you everyone.
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount sdcard /mnt/emmc 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# external sdcard
dev_mount emmc /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Click to expand...
Click to collapse
Hi,
As I can see in the video, he is just swapping the mounts. So, according to the original vold.fstab file you copied, I think after the modifications it should look like this:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount emmc /mnt/sdcard 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# external sdcard
dev_mount sdcard /mnt/emmc auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Is this what you already tried?
I hope it helps.
Professore said:
Hi,
As I can see in the video, he is just swapping the mounts. So, according to the original vold.fstab file you copied, I think after the modifications it should look like this:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount emmc /mnt/sdcard 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# external sdcard
dev_mount sdcard /mnt/emmc auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Is this what you already tried?
I hope it helps.
Click to expand...
Click to collapse
Lol u replyed and so he Died lool
It worked for me, Thanks ^^
helppppppp please
Hi everybody....
My internal sd broken & i install cm 4.2.2 on micro sd ram by recovery.
All is ok , BUT must switch sdcard in vold.fstab file , becuase device not detect any sdcard for camera , galery,download &.,.....
Please edit for working it......
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label #
#FIXME: Swap again?
# internal sdcard
dev_mount emmc /storage/sdcard1 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount sdcard /storage/sdcard0 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
-----------------------
I have try many things and lost many hours and can't find a answear to my Problem.
I have rooted my Optimus 2X and have installed the rom:
[ROM][JB] [4.2.2] Avatar ROM for LG Optimus 2X (p990) - Updated[Feb 28, 2013]
I want to use my 32GB SD Card for all my Apps but the internal memory of 8 GB is splitet into 2 Partitions
The First 1,48 GB this use the Phone to install apps
And a Second with 4,64 GB this is shown in every App as the SD Card but it isn't.
The 32 GB SD Card is listened but i can't move any Apps into it.
I have tryed many programs like Link2SD, Mounts2SD, Root All 2SD and have formated 2 Partitions 1 in ext4 the other in fat32 but nothing works.
Is there a way to made the internal Memory to one Partition and the Extern to the other?
In Root All 2 SD can i say that the App saves everything on the External SD but it thinks the Second 4,64 GB Partition of the Internal Memory is the External SD Card.
Can someone please help me? i try since 10 hours or more.
Sorry my bad english.
i have found a way now and it was very easy to do:
i have edited in the internal memory in the "etc" folder the file called "vold.fstab"
i have changed this:
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
dev_mount sdcard /storage/sdcard1 auto /devices/platform/sdhci-tegra.2/mmc_host/mmc1
dev_mount emmc /storage/sdcard 11 /devices/platform/sdhci-tegra.3/mmc_host/mmc0
into this
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
dev_mount sdcard /storage/sdcard auto /devices/platform/sdhci-tegra.2/mmc_host/mmc1
dev_mount emmc /storage/sdcard1 11 /devices/platform/sdhci-tegra.3/mmc_host/mmc0
maybe have someone the same problem with this and can fix it like the way i do.
And all thanks only goes to God :good:
Source:
http://www.android-hilfe.de/root-cu...go/319802-interne-sd-externe-sd-tauschen.html
Thank you
Thank you so much Heima77, I had exactly the same issue and I could fix it thanks to you.
Best wishes !
Hi, I'm new here. I looked around for a similar problem to mine but haven't seen it. Please be kind if I have missed it.
I finally updated from GB last night to ICS and then to JB. I've got root again finally. Now the problem is that I don't have access to my SD card.
My system version is: 98.72.18.XT894.Verizon.en.US
Android version is 4.1.2
Before the update I had swapped the SD card with the internal storage through void.fstab. To avoid problems with the update I restored the original fstab file to swap them back. Now these are the symptoms I see:
When I go to Settings > Storage, it force closes and I get the error "Unfortunatly, Settings has stopped."
When I browse to /sdcard in Root Explorer it says "The SD card is not currently mounted"
When I browse to /sdcard-ext in Root Explorer it just shows an empty folder
When I stuck the SD card in my computer, I could see everything I had on there before the update
Currently I'm using the original void.fstab file, but even when I try to switch, nothing changes. This is the original void.fstab I am using right now:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point[:[asec_point]:[lun_point]]> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## asec_point - Whether asec mount is needed for this value, if not, use "none"
## Else, supply a folder name under /mnt/secure/
## If not supplied, "asec" will used by default
## If supplied, /mnt/secure/asec_point will be used
## This is for further extension, not needed now
## lun_point - The target lun device for this volume. If not supplied, will use
## /sys/devices/platform/usb_mass_storage/lun0/file
## else, will use /sys/devices/platform/usb_mass_storage/lun_point/file
## part - Partition # (1 based), or 'auto' for first usable partition.
## For a disk with only 1 partition, use '1' is different to 'auto'
## Using 1, will not re-write its partition table when formatting
## <sysfs_path> - List of sysfs paths to source devices
######################
# external sd card
dev_mount sdcard-ext /storage/sdcard1:none:lun1 auto /devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0
# internal eMMC
dev_mount sdcard /storage/sdcard0:: 25 /devices/platform/omap/omap_hsmmc.1/mmc_host/mmc1
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# flash drive connection through hub connected to USB3
dev_mount usbdisk_1.1.1 /storage/usbdisk_1.1.1 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.1.1
dev_mount usbdisk_1.1 /storage/usbdisk_1.1 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.1
dev_mount usbdisk_1.2 /storage/usbdisk_1.2 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.2
dev_mount usbdisk_1.3 /storage/usbdisk_1.3 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.3
dev_mount usbdisk_1.4 /storage/usbdisk_1.4 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.4
dev_mount usbdisk_1.5 /storage/usbdisk_1.5 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.5
dev_mount usbdisk_1.6 /storage/usbdisk_1.6 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.6
dev_mount usbdisk_1.7 /storage/usbdisk_1.7 auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb3/3-1/3-1.7
Has anybody else had this problem? Does anybody have any suggestions on what to do here? Thank you for any help you can provide!
Yea!!
Actually I'm surprised that I'm not the only one, but it seems like this is a small problem. I can't mount internal or sd storage, and when I go into settings to mount, settings cashes. The phone WAS rooted when I updated from ICS.
jthree2001 said:
Actually I'm surprised that I'm not the only one, but it seems like this is a small problem. I can't mount internal or sd storage, and when I go into settings to mount, settings cashes. The phone WAS rooted when I updated from ICS.
Click to expand...
Click to collapse
So I got it to work, I re-flashed JB using the Matt's jb flash thingy without the SDcard, and it corrected itself. I should also note that I had an extra partition on my sdcard so I think it had something to do with it.
jthree2001 said:
So I got it to work, I re-flashed JB using the Matt's jb flash thingy without the SDcard, and it corrected itself. I should also note that I had an extra partition on my sdcard so I think it had something to do with it.
Click to expand...
Click to collapse
Ok, I just reset to factory default, but it still crashed when I tried to open up Storage in Settings right after the reset. What is this "Matt's jb flash thingy" and where can I get it?
*EDIT*: Are you possibly talking about the post on droidforums titled "DROID RAZR Utility XT912 Jellybean" by mattlgroff (can't link to it yet)? I think that's what I used originally. I'm going to try it again, but I've formatted my SD card and am no longer root after the factory reset. Hopefully it works this time.
Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example
Shying said:
Hi guys, i have i9000 with gingerbread stock 2.3.3 with kernel cf root, i didn't understand the internal and external storage's directory :V, /mnt/sdcard0 is internal for example
Click to expand...
Click to collapse
And /mnt/sdcard1 is external, what you cant you understand?
limnaln said:
And /mnt/sdcard1 is external, what you cant you understand?
Click to expand...
Click to collapse
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist
Shying said:
my internal sd is corrupted (http://forum.xda-developers.com/showthread.php?t=1861294&page=2) so my external sd have ext4 partition and the rom runs only for this partition but i don't have external storage now, i tryed to modify the vold.fstab but nothing :V
PS:Sorry for my bad english xD
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
discard = disable
asec = disable
}
dev_mount [COLOR="Red"]sdcard /mnt/sdcard 1[/COLOR] /devices/platform/s3c-sdhci.0/mmc_host/mmc0
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount [COLOR="Cyan"]sdcard1 /mnt/sdcard/external_sd auto[/COLOR] /devices/platform/s3c-sdhci.2/mmc_host/mmc2
#end line ## keep this line
Modified the red line with blue line and vice versa and the second partition of external sd (FAT32) is the first internal sd, but the second internal storage doesn't exist
Click to expand...
Click to collapse
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.
Rohitdahiya said:
I have had galaxy i9000 7-8 times in the past (because i switched occationally and sgs always fashinated me to buy)
the directory @limnaln said was the right directory but in 2-3 models, the directory for external sd card was mnt/sdcard/external_sd.
Click to expand...
Click to collapse
Yep, someplaces its sdcard1, someplaces external_sdcard.
ok guys it's work but when i use camera it's fine, but fast reboot when i want install app, tryed with root browse and whatsapp...what i have to do? tryed with 3Wipe and formatting sd but always reboot after downloading an app and during install
I think, you should change ROM to another (for example CyanogenMod) and try one more time.
jako_tako said:
I think, you should change ROM to another (for example CyanogenMod) and try one more time.
Click to expand...
Click to collapse
i can't because my internal sd is corrupted and when i tryed to install cm 10.2 it say "waiting sd mount 20s" :crying:
my sd card is /sdcard/external_sd auto....it isn't /mnt/sdcard/external_sd...and i don't know why...and this change can't find my internal sdcard any idea?
Maybe i can try this solution:
Code:
For i9000, Do the FULL wipes and factory reset first (formating the Internal SD card will greatly help, so safe all your contacts, images backups to PC or Ext SD card First) Use i9000 Rescue kit with heimdall or on linux , select files as follows...
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
The reboot may request for "Confirm password", just enter any password about 5 times until prompted that, "this will wipe the card." Yes wipe, ..Should solve the problem
but only found hotfile's link that not working now