I would like to flash a new Europ. FW version (say XWJS8 = ver. 2.2.1) to my phone with PDA: I9000ZSJPD / PHONE: ZSJPE / CSC: ZSJPD and ProductCode GT-I9000HKDVD2.
Has anyone of you tried this? I am afraid of any problems since the ProductCode does would not match the Europ. Firmware.
Thanks for some feedback
i tried a long time ago from dxjg4 to xwjpa using kies(it was possible before)
totally changed my prod code from xso to kor hahaha
but i dont know about your firmware
I was on DXJG4 too but I flashed to European firmware without a glitch. Mind you, I only flashed the "international" european versions, the one with XX as first two letters. Just like stated above, the only side effect is that it will change your CSC product code to KOR. But just a couple of months ago I changed it to XEU without any problem.
EDIT: Oh yeah I used Kies (tricked Kies, not it doesn't work) before and now I use ODIN for flashing
I have a 2 week old Galaxy Tab which Kies refuses to update I did not mess with it in any way, no root, no aftermarket firmware whatsoever...
Current firmware version: PDA:JMG / PHONE:JMA / CSC:JM6 (LUX)
Model number: GT-P1000
Firmware version: 2.2
Baseband version: P1000XXJMA
Kernel version: 2.6.32.9; [email protected] #1
Build number: FROYO.XWJMG
I got it in Belgium which is where I live but the firmware version says LUX which I assume means Luxembourg. Could this be my problem?
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Thanks! I'm trying this as we speak, do you have any idea which sales code to use for Belgium? I tried EUR, it seems logical (Europe?), but I will try them all if I have to -- I'll report back later
Edit: it's not EUR, it shows some weird alphabet, Greek I think I'll keep trying!
Edit 2: PHN gave a Dutch interface but Kies refused to update it as well, so I'll keep on trying different codes
So I tried doing the sane thing (instead of checking each code separately and waiting 2-3 minutes for the device to reset) and looked up every code and the corresponding country. Here's what I got:
YOG (Spain)
XEO (Poland)
XEH (Hungary)
VDH (Hungary)
TPH (Portugal)
SUN (Switzerland)
PHN (Netherlands)
OPT (Portugal)
MOZ (Switzerland)
LUX (Luxemburg)
IRD (Slovakia)
FOP (Spain)
EUR (Greece)
CYO (Cyprus)
COS (Greece)
AUT (Switzerland)
ATO (Austria)
No Belgium... Does this mean I will never be able to update my tab?
I tried LUX (which is a neighbouring country and the code that came with the device) and PHN (which uses the same language and is also a neighbouring country) but when connected to KIES both refused to update
its mean you have to flash your firmware or ask from anyone to give you the CSC files that has your country that in case you are rooted and have CWM i doubt you don't have
so
in second chance follow my guide to flash your stock firmware http://forum.xda-developers.com/showthread.php?t=1133590
u must download your firmware , from samfirmware.com but before download any one , check if it has your country or no , by this link http://www.samfirmware.com/samfit.htm
start to copy the firmware code from each firmware up there and see if its for your country or no ....
is that so hard ?
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
DarkPal said:
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
Click to expand...
Click to collapse
now he is yours , you are the pro with kies update
lol, I used up all my Google-fu and searched everything I could think of.
Anyway, I know how to root and flash custom firmwares -- I've done it with another Samsung -- but I just wanted to do this one the "official" easy way. But it looks like KIES won't play nice
To answer your question, I won the tab so I didn't buy it from a carrier nor was it SIM-locked. I'll see if I can find a JMG/JMF/JMG .zip somewhere and report back later -- thanks
cannot update out of box
even i purchased a galaxy tab from dubai but when i connected to kies it said my version of device could not be updated. but then i followed this link http://forum.xda-developers.com/showthread.php?p=13682956&mode=linear#post13682956 to install gingerbread and now everything is working fine, market and everything else works fine but the pda field and csc field shows empty when i dial *#1234# .
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
wolfie083188 said:
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
Click to expand...
Click to collapse
It's the exact same work to upgrade using kies as it is to flash a custom (or stock) rom using odin3 1.7 (or heimdal).
So in what way is it a pain?
u mean to say if i flash my tab with a stock rom then it can be later updated using kies when further updates are available.
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
I agree -- it's just that I was curious as to why this would happen with an out-of-box stock device.
I know how to use Odin (that is, I know how to follow a tutorial ), I've used it before to flash an Eclair to Froyo, but I'm not sure which ROM to use. I'm on samfirmware.com and downloaded P1000XXJMQ (2.3.3) -- is this the one I should use?
To be honest, I don't even know which samfirmware.com ROM I would need to revert to my current firmware version (PDA:JMG / PHONE:JMA / CSC:JM6)... I think it's either P1000XXJM6 (because of the CSC:JM6) or P1000XWJMG (because of the PDA:JMG)... It's confusing me
So I have 2 questions:
Is P1000XXJMQ a stock Gingerbread?
What ROM do I need in case I want to downgrade to my current firmware? P1000XXJM6 or P1000XWJMG or another one? Edit: I did *#1234# and assume it's P1000XWJMG.
By the way, CSC = Country Sales Code? (just a guess)
Edit: I'm going to flash P1000XXJMQ, I hope I don't brick it, wish me luck I'm a nervous wreck, I drank way too much coffee this morning
Edit 2: the one that samfirmware.com says is JMQ is actually JQ1... still looking for JMQ because I think that's a newer version
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
sarduwie said:
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
Click to expand...
Click to collapse
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
bongski55 said:
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
Click to expand...
Click to collapse
So far it's always been "cannot be updated". I knew it was a CSC problem, I just don't know where to get the right firmware. That's why I asked if P1000XXJMQ is a stock Gingerbread. I'm going to try and find a stock fw and flash it.
Edit: is this the right one: [stock rom][2.3.3] p1000xxjq1 p1000xxjq1 p1000xxjpz ?
JQ1 is stock for Italy
k0sh said:
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Click to expand...
Click to collapse
This worked fine for me. Thx
PDA : I9100GDXLP6
PHONE : I9100GDXLP6
CSC : Unknown
Build Info : Wed May 23 18:51:40 KST 2012
I update the latest firmware using KIES. Then when i using *#1234# show this result.
Question :
1. Is this thing i must worry? i already browse google and xda forum almost similar like this but other version of country.
2. I can't connect to KIES after KIES update. i see some people can change the modem to pda or usb. but i can't after ICS update.
(sorry for advance for my bad english)
Hope you all can help me. Thx for advance
hello Nazz Mid
i will help you but about the detail of csc unkown refer here:http://androidforums.com/samsung-galaxy-s2-international/528572-what-does-mean.html so basically we have to unroot the device before ota update.but try flashing ics 4.0.3 with odin from here:http://forum.xda-developers.com/showthread.php?t=1679636 But dont update with kies or from the phone itself since the download can become corrupted and effect the rom.
hey darkshadow1997,
thx for helping me. but my phone never root and i update ICS using KIES.
so should i just follow your step reflash the stock rom using ODIN?
well try it and see if it fixes your problem.
darkshadow1997 said:
well try it and see if it fixes your problem.
Click to expand...
Click to collapse
I already google and search about CSC. people say that this is kind of bug of firmware. already flash few stock ROM download from this XDA site and SAMMOBILE site. but still CSC still unknown. thanks for helping me. Maybe its firmware problems? Need to wait until new update release then will the result.
http://www.jayceooi.com/2011/09/03/how-to-change-csc-on-samsung-galaxy-s2/
here is some website that show how to change CSC but when i do this there is none to be selected. weird...
already try to flash the stock firmware with or without sim card.
annoying bug -.-
csc unknown
csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
Hello there,
Is there any one who have the same problem with me, i can't update my phone G800F with odin the latest firmware from sammobile. All the time it stack on failed and then the phone wont to boot. i can only update the G800FXXU1ANFF firmware so my phone works again.
Is there any solution?
PS: Well finally i found the way how to install. I can install only BTU version of Firmware (United Kingdom)
Hi, from what I've read around about the S5, there are some issues with different hidden partition sizes on different region firmwares which sometimes cause difficulty in installing firmwares not from the phone's original region. I assume it is the same with the S5 mini. While there are workarounds, it's preferred to simply install a firmware from the phone's original source country.
hello
here some details
i have samsung note 8 n950f
with this version
Product code CEL
PDA N950FXXU5CRHA
CSC N950FOXM5CRHA
(Cel = Cellcom) they are 1 of some providers here in israel
they still haven't get the update to one ui , and they also put some of their annoying apps in this rom...
i want to change it to this rom...
Product code ILO
PDA N950FXXU5CRHA
CSC N950FOXM5CRHA
(ILO - Clean rom) they are not a providers... they are the Official importer of samsung here at israel, and this is the reason they have a clean rom
i tried to flash via odin , but it stay the same.... the csc still CEL
and all the cellcom apps still there, what i did wrong?
how can i change it to ILO ?
(one more thing, my phone not rooted...)
thanks