Related
Just was wondering what people have been using to protect their N1s now that its been out for a while, and how has it held up. I like the look of the N1 on its own without cases, and was thinking of using the little pouch that came with the box with no other case. Is this a wise move?
I have a case on my phone and an anti-glare screen protector (don't get anti glare it ruins the screen's look and colors) the reason I don't use the pouch is it gets annoying to take the phone out of my pocket with the pouch on then have to remove the phone from the pouch.
Sent from my Nexus One using XDA App
The slip case that came with the phone
Seidio Innocase works for me. See the XDA Nexus acessories section...
I've got an Otterbox Commuter series case that I use when I'm on "business" trips or at other times that my phone is likely to be handled roughly. That case is no joke. Actually, I would probably use that case all the time if I didn't use my car dock every time I drive. It takes a bit of time to pull the phone out of the case several times a day. I generally just use the slip case that came with the phone. Does a good job of fighting off scratches, and is still easy to remove so I can install the phone in a dock in just a moment.
Just a screen protector, I have used cases/covers etc, and always end up coming back to just nothing I like the slim feeling
I like the slim look also, thats why i think im going to stick with the little android pouch that came in the box. Just hope it doesnt cause any black marks on the sides or anything. Previous owner of the nexus said he never used a case but made sure nothing else was in his pocket and the phone looks brand new with no marks anywhere.
On one of my other N1s there are some dust particles under the screen on the bottom left. 1 of them is big enough to look like a dead pixel when the screen is on, the rest are not noticeable. Anyone have a easy fix to get rid of the dust? That one particle is starting to annoy me.
Ever since I lost the neoprene case, I have been going commando.
Case-Mate "Tough Case" and the screen protector that came with it.
Transparent polycarb hard-case from eBay. Beautiful and strong, but no docking possible.
Stealth guard and there pouch that came with it
Sent from my Nexus One using XDA App
codesplice said:
I've got an Otterbox Commuter series case that I use when I'm on "business" trips or at other times that my phone is likely to be handled roughly. That case is no joke. Actually, I would probably use that case all the time if I didn't use my car dock every time I drive. It takes a bit of time to pull the phone out of the case several times a day. I generally just use the slip case that came with the phone. Does a good job of fighting off scratches, and is still easy to remove so I can install the phone in a dock in just a moment.
Click to expand...
Click to collapse
I do similar: when I'm traveling, I put the N1 in my Otterbox Commuter case and enable the PIN the lock. Otherwise, no case and no PIN.
A gel skin for me.
I put a screen protector on it to cut down on sweaty fingerprints during the summer, otherwise nothing. I've had mine since it came out for ATT (march?) and it's still perfect. Just keep keys and change in the other pocket.
i'm using a silicone slip on protector. i'm too scare i'll drop it without it otherwise i would go commando but i have nerve damage in my right hand so my control over parts of my hand are sub par compared to normal people
my ulnar nerve was severed by glass and repaired but i still do not have full function of the minor muscles in my hand and only have partial feeling in the pinky/ring finger and that side of my hand so thicker phones are more comfortable in my hand and the super rubber grip around the whole thing makes it very hard if not impossible for it to slip out of my hand.
smachine said:
Just was wondering what people have been using to protect their N1s now that its been out for a while, and how has it held up. I like the look of the N1 on its own without cases, and was thinking of using the little pouch that came with the box with no other case. Is this a wise move?
Click to expand...
Click to collapse
I use BestSkinsEver (for a fraction of the cost of an InvisibleShield) protection and a horizontal leather Case Logic pouch... I used to have a silicon protector but it was a pain in the butt because it collects dust and lint like crazy!
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
They have these on Amazon for $10 less than the Seidio site. The case and clip combo, edited cause I didn't know if people may have thought it was just the case. Just ordered the black one. I was going to wait for the cheaper platinum branded one from Best Buy but it still shows backordered on their site. I had the same case for my Captivate and Inspire and really liked it. If you need a belt clip this is a great option.
http://www.amazon.com/gp/product/B006671MRG/ref=oh_o00_s00_i00_details
My seidio active just came in from amazon, love it, although I had to pay the full 30.
pics/review/thoughts of your active and surface cases?
I'm looking for something with at least decent drop protection. Looks like Otterbox commuter fits the bill but I thought the active looked a little snazzier.
Here's the best photos I could manage with my old LG Optimus Get ready for the long blocks of text.
Lots of pros: Case fits perfectly along with exoskeleton, no need to worry about it being loose. Makes the phone a lot easier to grip. I no longer have problems gripping the phone, in whatever position I may be standing/lying. Case made of top notch material. Exoskeleton is made to absorb shock when the phone is dropped on its corners and it seems like it does just that.
Camera is not impacted by the case at all, or at least to the point where I cant tell. Everything is cut perfectly, both on the inner shell and outer shell. Doesn't add a lot of bulk to the phone itself.
Have a problem with accidently pushing the volume buttons? Not anymore. The soft inner case is solid enough so that the volume buttons/power button (which are covered) only get pressed when you want to.
Loved the kickstand the first time I tried it. I believe it was made to lock in one position. At first, I thought it was dumb that they made the kickstand open so that the charger port was pointed down towards the table but you can just flip the phone 180 degrees and use the kickstand that way too! Should be all the viewing angles you need.
Cons: The hard exterior exoskeleton does not cover the top and bottom of the soft case. I did not get the holster with it so I do not know how the holster will affect the softer plastic but it seems extremely durable. Not sure how long the kickstand will last but seems well built so hopefully the entire lifespan of my phone. Another con is that the kickstand juts out of the case a millimeter or two so that when you have the phone flat on a table, it doesnt sit flat on its back.
Does attract a bit of lint but hardly noticeable unless under bright lights, which is how I took the pictures
Overall, very nice and durable case. Wish it was a bit cheaper than 30 dollars so if you can snag a sale, good for you! Highly recommended it. I didnt even know seidio existed before reading through these forums and looking at the opinions others gave them and I am glad I went with it! Let me know if you have any other questions.
I just got my surface case in today and it is exactly what I expected. I've had the same case on my Captivate and Inspire. There are other cases I like better but the clip is a necessity for me. Fits like a glove and doesn't add much bulk at all.
It adds a decent amount of protection but don't expect Otterbox Defender kind of protection. Though I have dropped my Captivate and Inspire numerous times with this case on and never had any damage.
Pics later when I get a chance.
Sent from my HTC PH39100 using XDA App
FYI I've had Seido Surface cases cause micro scratches on the plastic of phones before. Little pieces of dust/debris get stuck inside and the hard plastic of the phone causes it to scratch the plastic of the phone.
You can have this issue with any type of hard plastic case. I've seen it happen personally on the cheap generic Ebay cases and expensive Surface cases.
I've seen the build up but not scratches in the 3 that I have owned. But I'm also not looking for it either as I don't care if the plastic gets scratched up. I just need something with a belt clip that doesn't add much bulk and gives some protection in case of a drop.
Sent from my HTC PH39100 using XDA App
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
Really torn right now between purchasing the Commuter case from Otterbox or picking up one of the UAG cases for my note 2. I see that the Otterbox offers a two layer case vs the UAG single layer. Also the Commuter has covers for the ports and the UAG does not. Also for those that do own either or both, which do you orefer and why?
Sent from my SCH-I605 using Tapatalk 2
2 layers or a single molded layer - both offer very similar level of protection. I played with Commuter, but pass on it. Using UAG now. Too many advantages over Commuter. The back is less slippery, and has standoff "feet" to create friction with a surface; Commuter is easier to accidentally push/slide off the table with slippery surface (like grass top or granite). Also feels less slippery in my hand (UAG that is). One piece is a lot easier to take off if you need to change battery or remove card. Design of volume/power buttons is better and more responsive, like an external hardware buttons. It's lighter. Better design, looks a lot cooler and has customizable vent inserts. Don't care much about port plugs since I use my phone as GPS on a charger in a car and having micro-usb port cover is PITA. I feel Commuter inner rubber shell will get loose with time, already noticed pull around volume buttons where the rubber part was looser.
Honestly i was pulling towards the uag but i couldnt risk an wait for it to show up so just said buck it an got a commuter.. So far ive been realy happy with it. Size is good gives me a better grasp. A tad slippery but i got used to it now an got my way of holding it. Lip size around the edges is nice too realy would help incase phone fell screen down. Also comes with its own screen protector wich i botched the install since i suck at putting those on. An the biggest of all my conserns was the push buttons. On most of my cases on my old gs2 they were hard to push an this case there just rite.. not to soft nor to hard at all realy just perfect pressure to press. Better then my exs gs3 commuter wich is hard as shat to press the volume or power. I wouldnt put up with it if it was like that on mine.
I give it a 9/10. An only for the color choices aint the best style combinations that they coulda use but oh well not a deal breaker
sent from my Cricket Note 2
Loved my s3 commuter but the note 2 version is now in the trash. That thing was a terrible fit and gradually got worse. Had a replacement that was the exact same. UAG looks like the clear winner right now. I will buy once the crazy pricing goes down.
Sent from my SCH-I605 using xda app-developers app
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
I have to go with the commuter here. Some of the previous reviews have pointed out that the back is slippery. While I would agree, I also think that is not too slippery, and it is much easier to put in and take out of pockets than the UAG. Also, the biggest thing that I disliked about the UAG besides the lack of port covers, was that it just felt awkward in my hand. The commuter is much nicer to hold IMO. Also my UAG case was less than snug, it just felt like the phone wasn't secure. Also, the Commuter I think offers superior protection. Just check out this video. The Commuter, for all realistic purposes, does protects the phone just as much as the defender (which I also have). I think the commuter is the clear winner here.
Also, for what it's worth, Otterbox is the best mobile accessory company out there. Their customer service is quick & friendly. I have contacted them through both phone and email, and I have never received any service less than stellar, unlike my experience with UAG. I preordered my UAG case and was shocked at how little contact UAG had with me, as a preorder customer, especially considering how long the case was delayed.
My commuter also bent my charging port with its stiff port cover. Had to cut it off after my phone was replaced and then the left side of the phone began popping out. The Otter box hit the trash immediately.
Sent from my SCH-I605 using xda app-developers app
I loved my commuter when I first got it but now I hate it. The silicone is made out of cheap material, two weeks old and it's already tearing. The back is very slippery. I sometimes have trouble fitting my usb plug into the slot because the silicone gets in the way. Haven't had the usb bend yet as some have reported. The headphone jack on the commuter is not big enough for some of the plugs I use. I order the UAG case and it will be in tomorrow. I had the UAG on my S3 and I know what a terrific case it is. When my UAG comes in I'm throwing the commuter away.
I have had a commuter, a few other cases, and the UAG.
The Uag was my clear favorite. It is slim enough, but offer comparable protection to the commuter. The commuter was just too heavy and thick. The Uag is slimmer, and noticeably lighter.
I'd recommend Uag over the computer with out pause... Build, looks, and overall quality. But that is simply my opinion and nothing more.
I had seidio active... The magnet kickstand messed up the stylus.
I had a incipio dual pro shine. Great case that added protection, but not as much as the two you listed above. It so scratched so easy and looked like horrible in a week.
The Uag is my final case I believe. If your not sold on either, look into the trident aegis. I oersonslly don't like the way it looks, not even a little bit. But it is getting g great reviews by people here and the people who own it seem to prefer it. Maybe it looks better in person.
Sent from my SPH-L900 using Tapatalk 2
jbreeze228 said:
The silicone is made out of cheap material, two weeks old and it's already tearing.
Click to expand...
Click to collapse
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
AlphaNoble said:
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
Click to expand...
Click to collapse
Lmao. Nicely done sir.
Sent from my SGH-T889 using Tapatalk 2
Anyone know if UAG Allows wireless charging or does it affect it?
So I settled on the commuter case and have got to say I am pretty happy with it. Doesn't make the phone all that much bigger and having the port covers is a plus. Although we will see I'm pretty sure I will end up getting the UAG case as well so I can try them both out.
Sent from my SCH-I605 using Tapatalk 2
Literally just got my UAG case in and it was effing awesome! It's so easy to hold and grip versus the commuter I was scared would fall out of my hands because it was so slippery. The buttons are a lot easier to push. Love how you can change the vent colors but rockin the orange for now. The only area the Otterbox wins in is the size of the spen cut out. Other than that there is no comparison between these two. Don't see myself using any other case. Great job UAG.
Sent from my SGH-T889 using Tapatalk 2
chodie said:
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
Click to expand...
Click to collapse
Please let us know how it goes with the MIME glass screen protector.
I have both cases and must say UAG wins. Top it off with mime, excellent product with outstanding support
Sent from my GT-N7105 using xda premium
P
Sent from my HTC One using Tapatalk
UAG is very light and is easy to put on or take off. It has military standard drop. Heat vents keep your phone cool. Easy to hold. Looks good if you like the rugged look. Last a long time. I have a uag case from 4 years ago that still looks great today.
Sawdust in your port
Covered ports may seem unnecessary, but when I was working at radioshack, an old man came in and said his phone wasn't charging right. I assumed it was the cord (because that is the case 9 times out of 10), but the cable was perfectly fine. I then checked the USB port, and it looked like someone shoved white playdough in the port and shoved it down. As I pick it out, I discover it was sawdust that was left in there and shoved down over time. The phone worked fine after that.