I thought I knew enough not to ever post a question that might be answered already but here goes... I am an HTC Evo owner and know how to flash a rom in recovery with no problem. I boot into recovery (Amon Ra, I have cwm on my wifes phone) do a nandroid backup, wipe phone, cache, dalvik then flash zip from sd. i choose a rom and flash then reboot, everything is all good. With my Vivid, I am fearful of flashing a rom this way because of this fastboot step and what is a kernel(<------- i know it sounds newb but a for real question)? If I absolutely have to perform the fast boot step, I am 99% certain I will be able to figure it out, in fact I believe I have performed a similar task when rooting the Vivid. I may have the capability to do it but it doesn't make sense to me. I would like to understand why. Any helpful answers or tips for me?
"In computing, the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level." (This was from Wikipedia)
I would post a URL but since I'm 'new'.
Anyways, that's the gist of it.
(To my knowledge)
With most roms for example Rumraider, you need to flash the kernel (boot image) first before you flash the rom in. Cwm in order for the Rom to boot properly. It is the nearly the exact same steps as you HTC EVO. I'm coming from an HTC Aria so I'm like you and never had to this kernel flashing before. Trust yourself it is not hard. Just read the superguide. I repeat READ THE SUPERGUIDE. It explains exactly how to do it. There are a few ways to do it. I find using the command prompt the easiest but you need a pc. You can now even use a kernel flasher or a program called flash image GUI from the market. Honest its not so bad just read read read. I believe we need to flash this way until we get S-off. Hope this helps.
Sent from my HTC PH39100 using XDA App
strose09 said:
With most roms for example Rumraider, you need to flash the kernel (boot image) first before you flash the rom in. Cwm in order for the Rom to boot properly. It is the nearly the exact same steps as you HTC EVO. I'm coming from an HTC Aria so I'm like you and never had to this kernel flashing before. Trust yourself it is not hard. Just read the superguide. I repeat READ THE SUPERGUIDE. It explains exactly how to do it. There are a few ways to do it. I find using the command prompt the easiest but you need a pc. You can now even use a kernel flasher or a program called flash image GUI from the market. Honest its not so bad just read read read. I believe we need to flash this way until we get S-off. Hope this helps.
Sent from my HTC PH39100 using XDA App
Click to expand...
Click to collapse
What he said.
Sent from my Transformer TF101 using Tapatalk
Thanks to all of you!!! I use the comand window with the EVO 3d screen to boot in recovery. (1.5) I use the rootevo3dnew folder and hold down shift right click and it opens that comand window. (Just so you know what I know) But with the vivid I cant get the comand window to find the phone. I have used flash image GUI from the market (life saver) But I have found that some ROMS do not have a Kernal file in it for it to find. So it says I am missing img. So the question is how do I flash a kernal or add it to a Rom I would like to try? O and yes a noob all the way
When you use the command prompt window are you in fastboot on your phone? Make sure you install the correct drivers as well. If that doesn't work try using a program called easy kernel flasher. I think a dev on her created it.
Sent from my HTC PH39100 using XDA App
strose09 said:
When you use the command prompt window are you in fastboot on your phone? Make sure you install the correct drivers as well. If that doesn't work try using a program called easy kernel flasher. I think a dev on her created it.
Sent from my HTC PH39100 using XDA App
Click to expand...
Click to collapse
Thanks I will try that tonight The one thing I noticed is I use FlashImageGUI and it works great on HoliRaider V1 - Sense 3.5. I have tried to use it on VJRaider 0.0.3 Sense 3.5 and it will not load the kernal. why would that be?
I stole this from the superguide.
First, download FlashImageGUI from the bottom of the post. But, if you are going to use this more than once, SUPPORT THE DEV and buy the app from the market. You will also get auto updates if you buy it straight from the market
- If you downloaded the FlashImageGUI from the bottom of this post, put it on your external sd card and use a file explorer from your phone to install it
- Then download the ROM you want (this app can find the kernel image in a ROM zip) or just download the kernel by itself or the recovery img you want
- Put your desired kernel or ROM zip or recovery img on the ROOT of your SD card (not in any folders)
- Turn off wifi
- Launch the FlashImageGUI app on your phone
- Click browse and select the ROM zip or kernel or recovery img you put on the sd
- If you selected a ROM zip, the app will automatically find the kernel image
- Select "kernel image" or "recovery image"
- Select "clear dalvik" and "clear cache"
- Click "Flash Image" and let it complete
- IF THIS GAVE AN ERROR OR DIDN'T WORK CORRECTLY, ASK THE DEV OF THE ROM/KERNEL/RECOVERY TO MAKE IT COMPATIBLE WITH THIS APP
- If you were flashing a recovery, turn off the phone and try going into recovery mode (power button + vol down) and you should have the new custom CWM
- (If you were flashing a kernel, YOU NEED TO IMMEDIATELY FLASH YOUR DESIRED ROM
- Turn off your device, then boot into h-boot (hold down the power button and vol down)
- Now flash your ROM zip by following the guide below to flash the ROM, START WITH STEP 6 OF THAT GUIDE
http://forum.xda-developers.com/showthread.php?t=1416836
strose09 said:
I stole this from the superguide.
First, download FlashImageGUI from the bottom of the post. But, if you are going to use this more than once, SUPPORT THE DEV and buy the app from the market. You will also get auto updates if you buy it straight from the market
- If you downloaded the FlashImageGUI from the bottom of this post, put it on your external sd card and use a file explorer from your phone to install it
- Then download the ROM you want (this app can find the kernel image in a ROM zip) or just download the kernel by itself or the recovery img you want
- Put your desired kernel or ROM zip or recovery img on the ROOT of your SD card (not in any folders)
- Turn off wifi
- Launch the FlashImageGUI app on your phone
- Click browse and select the ROM zip or kernel or recovery img you put on the sd
- If you selected a ROM zip, the app will automatically find the kernel image
- Select "kernel image" or "recovery image"
- Select "clear dalvik" and "clear cache"
- Click "Flash Image" and let it complete
- IF THIS GAVE AN ERROR OR DIDN'T WORK CORRECTLY, ASK THE DEV OF THE ROM/KERNEL/RECOVERY TO MAKE IT COMPATIBLE WITH THIS APP
- If you were flashing a recovery, turn off the phone and try going into recovery mode (power button + vol down) and you should have the new custom CWM
- (If you were flashing a kernel, YOU NEED TO IMMEDIATELY FLASH YOUR DESIRED ROM
- Turn off your device, then boot into h-boot (hold down the power button and vol down)
- Now flash your ROM zip by following the guide below to flash the ROM, START WITH STEP 6 OF THAT GUIDE
http://forum.xda-developers.com/showthread.php?t=1416836
Click to expand...
Click to collapse
Yep I tried this like 5 times didn't work and I found out I had a bad download. So I downloaded the rom again and used this and it worked. Thanks guys
I thought I was losing my mind on this but just a bad download
Related
[04/23]
It couldnt be easier
Download openZIO-clockworkmod-recovery-pack.zip
Extract to C:\
Run "m6000_setup.msi" in the CWM folder and Follow install.
**you may encounter software signature issues, just 'install software/driver anyway'.
Plug in your phone to USB, power down.
Boot to fastboot (Hold Send/End simultaneously til fastboot starts)
open a command prompt and navigate to the "CWM" directory
Code:
cd\
cd CWM
Fastboot boot into openzio_clockwork-recovery image
Code:
fastboot boot clockwork-recovery.img
Profit.
***You will Lose your Kyocera Logo once you RESTORE (due to the way cwm dumps the boot partition).
Please download the openZIO Boot Fix and install the zip with CWM.
This will flash the correct boot image and restore your Kyocera Logo.
-------
[03/22]
I have edited this initial post because I have found a workaround to get clockwork recovery to load on the ZIO without wiping data/cache.
Unfortunately, until Koush gets the module fixed to run remotely from our phones, you will need to be connected to a PC, and know how to use Fastboot.
blah blah DISCLAIMER blah: I am not responsible IN ANY WAY for people screwing up/bricking their phones as a result of using this image.
....old method deleted by OP....
Thanks go out to Hotaru for compiling this recovery image, and obviously to Koush for making clockworkmod recovery.
Remember to hit the "Thanks" button if I helped you.
try downloading ROM Manager from the Market and then having it install the recovery.
Our phone isnt in the phone model list.
Install from sdcard prompts me to install clockworkmod recovery first.
Sent from my Zio using XDA App
isnt there a custom recovery option???? bet you can save that image from the page to the sd card and then run it through rom manager???
BTW I hate rom manager LOL.... I tryied to use it to format my sd card for link2sd.... and it tried to boot thephone into boot or recovery or something.... and ended up completely factory resetting my phone
hell I had even installed a handfull of apps before it happend LOL and my dumb ass didnt do a TI backup....
dreamstryder said:
isnt there a custom recovery option???? bet you can save that image from the page to the sd card and then run it through rom manager???
....
Click to expand...
Click to collapse
How would this be accomplished?
Everytime I choose to install from SD, it prompts me to install clockworkmod recovery first
*edit: "Flash Alternate Recovery" is grayed out as well.
Sent from my Zio using XDA App
Maybe someone still running 1.6 could try and flash the M6000 recovery?
Spz0 said:
How would this be accomplished?
Everytime I choose to install from SD, it prompts me to install clockworkmod recovery first
*edit: "Flash Alternate Recovery" is grayed out as well.
Sent from my Zio using XDA App
Click to expand...
Click to collapse
'
betcha you have to have the premium version of clockwork to bwe able to flash alternate recoveries... I dont trust it enough right now to buy it and find out lol
dreamstryder said:
'
betcha you have to have the premium version of clockwork to bwe able to flash alternate recoveries... I dont trust it enough right now to buy it and find out lol
Click to expand...
Click to collapse
odd thing about it, is that I _do_ have premium. o.0
maybe you have to drop the image into a certain directory then?????? for clockwork to find it???
dreamstryder said:
maybe you have to drop the image into a certain directory then?????? for clockwork to find it???
Click to expand...
Click to collapse
/sdcard/clockworkmod/*
Nogo either.
how did the people get rom manager to see thier custom recovery when they was experimenting with sprints 2.1 stuff???
dreamstryder said:
how did the people get rom manager to see thier custom recovery when they was experimenting with sprints 2.1 stuff???
Click to expand...
Click to collapse
Well, we used fastboot to load it up.
Then used adb to tell it to boot into recovery. There was also some key combo I forget. It's all around page 30 or so of the 1.6 thread.
What do we need to do to make clockworkmod work?
Sent from my from my rooted 2.2 no bloat Zio using XDA App
I'd suggest that we all send an email to koush at clockworkmod asking for support.
I'm working on building a compatible version, but I'm running into all sorts of build issues.
Sent from my Zio using XDA App
What's the email address?
Sent from my Zio using XDA Premium App
Those images generally need to be flashed through fastboot, and fastboot might not even work depending on the bootloader.
you need the sdk installed first, and adb working and added to your $path.
after that
Code:
adb reboot bootloader
Code:
fastboot flash recovery /path/to/recovery.img
obviously, replace path/to/recoery with the actual path that you downloaded the file to.
That revocery image (I found out) is for the 1.6 OS.
Being as we have 2.2 and an updated kernel: would this recovery still work?
Guess I'll be the guinea pig for this afternoon. o.0
edit:
adb reboot bootloader is for our modem download mode.
To access fastboot, we just power down, then hold the power/end and send key simultaneously.
recovery only cares about the hardware, not the os or kernel, thats why you use it to flash custom roms and kernels. It boots before anything else is loaded.
Spz0 said:
adb reboot bootloader is for our modem download mode.
To access fastboot, we just power down, then hold the power/end and send key simultaneously.
Click to expand...
Click to collapse
Thanks good to know. Thanks.
option94 said:
recovery only cares about the hardware, not the os or kernel, thats why you use it to flash custom roms and kernels. It boots before anything else is loaded.
Click to expand...
Click to collapse
Nice also good to know :-D
I'll flash it when I'm home and post results.
Sent from my Zio using XDA App
This thread is here to make the lives of every one just that much easier. Will try to keep the first and reserved posts as up to date as humanly possible.
Please ask all questions in relation to issues you are having following the FAQ instructions to make it easier to answer your questions and easier for us to track the solutions that way the FAQ post is as up to date and accurate as possible.
As the GT10.1 landscape changes this thread will get updated. I will try and keep everything as simple and to the point as possible. Contributors will be much appreciated.
THE BASICS
BOOTLOADER MODE
Turn device off. Then hold down power + volume down button (the button closer to power button) until you see two icons appear then let go. Left icon (box) is recovery and right icon (Android robot) is Download. Use Vol. down to navigate then vol. up to select.
DOWNLOADING MODE
Just tap volume up when you have highlighted the android robot icon. You should see downloading appear under the icon.
RECOVERY MODE
Vol. up/down to navigate up or down and power button to select.
This is what you use to install ROMs/KERNELs and even themes for your specific roms when they become available. Just highlight the box icon and hit Vol. up. What we are doing now is replacing the stock recovery on your device with Clockwork Mod Recovery which allows you install unsigned ROMs/Kernels/Updates. When in recovery mode you can also back up whatever current ROM you have on your device so if you install a new ROM and something goes wrong you could always use recovery to restore. Whenever you install a new ROM it's advised to always wipe the device using cwmR to ensure a more stable install. Install new ROMS will also mean you will be losing all the apps on your device. It will look like you have a brand new device after the install unless its an update.zip for whatever rom you are currently on and the developer of that rom supports it.
Don't worry about losing your apps as you can always re-download them once you sync your device with your google account. However, the state of those apps and your settings will be lost, so I strongly suggest that you use an app like titanium back up and always make a back up of your apps before flashing any new ROMs. Check in the Recommended Apps section for a direct link to Titanium backup.
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above . If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
CLICK ME FOR ALL TERMINOLOGY DEFINITIONS
NVFLASH
Nvflash is a low level formatting and imaging tool. If you don't have a working recovery, or have broken the actual boot-loader on your tablet, this is the tool you will need to turn to. For those with unlocked bootloaders (and no fastboot capability), its the best way to root your device. Nvflash is pretty much NVida's version of say an ODIN program but done through cmd prompt. It can save a tablet if one is soft/semi-bricked or maybe full-bricked. To use nvFlash you must first put your tablet in APX mode (think of it as a way to allow you use commands on your computer to control your tablet).
Refer to this thread for downloads and instructions.
So off we go.
ROOTING YOUR TAB
GO TO SamsunFirmware.com AND DOWNLOAD A STOCK FIRMWARE FOR YOUR TAB VERSION> KEEP IN SAFE PLACE!!!!!!! You are already on the right page just scroll down.
Courtesy of RoboBear
GOOGLE I/O & RETAIL WIFI VERSION
[GTP7510]
DOWNLOADS compiled and hosted by tphillips
Content - GT-p7510_USB_Driver | hc-3.1_ota-full_sam_tab_10.1.zip(StockROM) | Odin3_v1.85 | recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 | stockretail.tar.md5(recovery) | Samsung_Galaxy_Tab_10.1_root
Download FilesForDummies.zip here
Mirror 1
Mirror 2
DONT WIPE during any part of this process. Make sure to put the stock rom from the download package on your device/use CWM and do a backup of your rom before you start anything in case something goes wrong. You have been warned!!!!!
1. Install samsung USB driver or download samsung Kies and install on your computer which will in turn install the drivers for you.
2. Run Odin.exe, choose PDA and point it to recovery.md5 file.
3. Connect tab via usb to your computer while in downloading mode then hit start in Odin on computer after connection has been established. Run, wait then reboot.
4. Connect tab to computer in usb storage mode (make sure usb debugging is off in tab settings) copy root exploit (Samsung_Galaxy_Tab_10.1_root.zip) to you tablet and take note of where it is. You can skip this part i fyou downloaded this file with your tablet.. Turn off tab. Reboot into bootloader again but this time go to recovery. Select to install zip from SDcard. navigate to where the root.zip is. Install the root.zip. Reboot into android. Your tablet is rooted.
5. Done.
You can also refer to this well made Video showing the whole procedure or this other awesome video by Dansan682.
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
Courtesy of Robobear
RETAIL 4G
[GTP7500] courtesy of poitee
Downloads
Kernel.zip
Recovery.zip
1. Copy Files to root of device storage.
2. Boot into Bootloader mode and navigate to and enter recovery mode.
3. Apply Kernel.zip then recovery.zip
4. reboot.....Done.
UNROOTING & RESTORING STOCK RECOVERY
1. Using CWM Flash the stock rom for your device. This unroots your device and basically makes it like a brand new tablet.
2. Use Odin to flash the stock recovery from the filesfordummies.zip.
3. Done, your device is exactly how it was when you picked it up.
FLASHING ROMS AND KERNELS
This is pretty easy as long as you have CWM on your device.
Simply boot CWM recovery, navigate to either update/instal zip from SDcard (pls adhere to ROM/kernel install instructions) and flash the .zip file of the ROM or kernel.
I will update this section with links to all the existing and stable ROMs and kernels as the become available. I will advice that you hold off on the kernels if you can as every stable kernel will eventually get cooked into a ROM unless of course you want to help test them or be on the bleeding edge .
AVAILABLE ROMS & KERNELS
LEGEND
★ - WIFI
★ - 4G
★ - 3G
★ - Custom ROM
★ - Kernel
If your Device is supported the stars will tell you all you need to know.
★[ROM]Stock US Retail WiFi in case something goes wrong
[Solution] HC 3.1 OTA Stock ODIN
★[ROM]Stock|EU|Wifi|Retail|Touchwiz
★ [ROM][STOCK][ARABIC][AUG'13]W/ Official TOUCHWIZ
★★ [ROM][CWM] 3.1|WiFi|Touchwiz UX|DEODEXED
★★ [ROM][CWM] 3.1|WiFi|Touchwiz UX [UPDATE: New WiFi Base Rom]
★★ [ROM][CWM]3.1|WiFi|Bonsai ROM|ToucWiz option|
★★ [ROM][CWM]3.1| Blazar TW Rom|OC 1.6GH Kernel|Prerooted| by Poitee
★★ [ROM] [CWM]3.1|StarBurst ROM| by PhantomHacker
★★ [ROM][CWM][EUR][3G] BroodComb G-P7500 XWKG9 [ALPHA]
★★ [ROM]Task650's KME ROM UEKME Touchwhiz
★★ [KERNEL] 3.1|WiFi|OC 1.4GHZ| by Pershoot
★★[ROM] LiquidSpeed>>> New!!!
★★[KERNEL] 3.1|WiFi|OC1.6GHZ|Voltage Control|Voodoo Sound|CIFS-NTFS| by Poitee
[TABUNTU] Galaxy Tab 10.1 NATIVE Ubuntu WIFI now with a video
IRC ONLINE CHAT
Drop in HERE if you need some Help . #gtab
ROM/KERNEL/THEMES/UPDATES BETA TESTING!!!!
Ever wanted to get whats coming before anyone else (never mind the small issue of being a guinea pig ) Well here is your chance. In this section I will put up the contact info of any dev currently looking for testers and for a limited duration, once the devs has all their testers his link will be closed. You can also think of this section as a great way to see what is coming and what stage of development its in. So stop just downloading stuff people, now you can actually really contribute to making what gets released the best it can be and as bug free as possible.
FAQ
Be sure to ask whatever questions you have in relation to anything and any problems you come across. But please start every question you have with either a
(Q) basically letting me know its a question or a
(P) letting me know its a problem
I will put up all your questions or problems on here so everyone can see them and the answers or fixes . this way people won't have to filter through tons of pages to get help.
(Q) Should I follow these instructions for an IO edition tab? Or should I just use the fastboot flash [cwm recover] and flash the zips through that?
(A) This method will work on the IO version.
(Q) kernel 2.6.36.4 is a NO-GO for the 3G version?
(A) Yes, it doesn't work on the 3G version yet.
(Q) If my tab ins locked does that mean i cant flash kernels on it?
(A) You can flash anything as long as you have a recovery that will support it. In our case CWM. Being locked and unlocked really only stops you from flashing stuff "easily" but since we can change the recovery, we can flash anything.
(Q) Does the Odin file wipe tab?
(A) No. All Odin is doing here is flashing a new recovery to your tab. Nothing more.
(P) Can't see tablet as USB storage device on Mac.
(A) Unfortunately Android and Macs don't play nice... you best bet is to use dropbox or a simple bluetooth transfer to transfer files from your mac to your tablet. Then on your Tab use a file manager app to move your files to where you want them to be. For now. Another option is to download everything that requires you using CWM with your tablet so its all already there. So in CWM all you have to do is navigate to your downloads folder. I just created a folder called mods and I have them all there.
(P) Stuck in BootLoop after Flashing ROM via Odin.
(A) You should use nvFlash to falsh CWM if you don't still have it then do a full wipe of your device including reformating all partions in mounts and storage except the boot partition then using Odin install a stock Rom on your device.
(P) I messed things up on my LTE tab and I now somehow dont have a recovery mode anymore!!!!!
(A) Go Here and scroll to post #4 and follow tijayz instructions.... make sure to thank him!!!
USER TIPS AND RECOMMENDED APPS
TIPS
1. Working Hulu
2. How to utilize the entire screen for setting widgets and icons without the 1inch gap on the sides? Use ADW launcher EX
3. Rotation Lag Fix
4. Look here for a Mod to permanently set your browser user agnet to desktop. No more mobile sites.
RECOMMENDED APPS!!!!!go on!!, find an awesome app and suggest it to be added to this list!!! Only android market or direct .apk links so isers can download and install straight from their devices
Titanium BackUp
Circle Launcher
ADW Launcher EX
Beautiful Widgets
CNN
Minimalistic Text
Thumb Keyboard
Tablet Keyboard
XBMC
PLEX
Playstation Emulator
SNES emulator
Multipicture Live wallpaper. Kiss weirdly cropped wallpapers goodbye
Wallpaper Slideshow
Dolphin Browser HD
Pulse news Reader
AutoDesk SketchBook Pro
Feedly
File Manager HD (honeycomb)
All credit goes to all the awesome devs and members of xda. I have done nothing but make this thread.
DEV CENTRE
This section will have a host of developer specific tools and even tutorials. XDA making it easier for XDA??????
Good Times....
To start things off
APK Manager: Honeycomb Edition by tphillips
Thanks so much. But the download link doesnt work. Would appreciate it if you could get it working! Looking forward to flashing roms!
EDIT:Nevermind-its working
rvrugg90 said:
Thanks so much. But the download link doesnt work. Would appreciate it if you could get it working! Looking forward to flashing roms!
EDIT:Nevermind-its working
Click to expand...
Click to collapse
Sorry, try again... its working on my end though.
Nice, should be stickied.
(Q) Should I follow these instructions for an IO edition tab? Or should I just use the fastboot flash [cwm recover] and flash the zips through that?
The so-called "Mount device as USB Mass storage" thread has nothing to do with mounting the device as Mass Storage. It only tells you how to mount as MTP, which can be done without any of the steps mentioned in the thread. Seriously, it doesn't belong on this list.
Also, you should include instructions for using nvflash to install a custom recovery. I found it much easier and safer to root through this method than through Odin.
[Q] kernel 2.6.36.4
Many thanks for preparing this post.
Just wanted to add a question here: can you confirm that kernel 2.6.36.4 is a NO-GO for the 3G version?
Or is it related with TW versus plain HC?
I'm running the stock TW rom on a rooted 3G tab. Tried to flash the above kernel with OC purposes, had to recover through a CWM backup.
Thanks for clarifying
ca110475 said:
Many thanks for preparing this post.
Just wanted to add a question here: can you confirm that kernel 2.6.36.4 is a NO-GO for the 3G version?
Or is it related with TW versus plain HC?
I'm running the stock TW rom on a rooted 3G tab. Tried to flash the above kernel with OC purposes, had to recover through a CWM backup.
Thanks for clarifying
Click to expand...
Click to collapse
the oc kernel is not supporting tw at this current time.
I'm just going to copy exactly waht I typed in the IRC -- I'm stuck without being able to reboot into recovery with an I/O tab. Also cannot get fastboot to work
- i got some help from here earlier but now i'm stuck again in rooting/flashing a custom rom on the IO edition
<slobdogg> i went through the ODIN process to revert to 3.0.1, then was able to adb reboot recovery and install the root file
<slobdogg> afterwards i installed clockwork mod using RM, and then did the update to a 3.1 OTA file on XDA
<slobdogg> now i'm supposed to reboot into recovery to reinstall root but i cannot
<slobdogg> even in ADB if i reboot recovery it just restarts the device...also, I cannot enter recovery through the Vol Down + Power method, just fastboot and odin
<slobdogg> so im right back where I was (3.1 with no root)
ralexand said:
I'm just going to copy exactly waht I typed in the IRC -- I'm stuck without being able to reboot into recovery with an I/O tab. Also cannot get fastboot to work
- i got some help from here earlier but now i'm stuck again in rooting/flashing a custom rom on the IO edition
<slobdogg> i went through the ODIN process to revert to 3.0.1, then was able to adb reboot recovery and install the root file
<slobdogg> afterwards i installed clockwork mod using RM, and then did the update to a 3.1 OTA file on XDA
<slobdogg> now i'm supposed to reboot into recovery to reinstall root but i cannot
<slobdogg> even in ADB if i reboot recovery it just restarts the device...also, I cannot enter recovery through the Vol Down + Power method, just fastboot and odin
<slobdogg> so im right back where I was (3.1 with no root)
Click to expand...
Click to collapse
in order to do adb reboot recovery you need a rooted boot.
flash the latest tools pack, and you will get root/adb root shell/busybox,dropbear,ssh,etc.,etc.
you need to get CWM or the stock IO recovery on the device, prior to being able to flash.
pershoot said:
in order to do adb reboot recovery you need a rooted boot.
flash the latest tools pack, and you will get root/adb root shell/busybox,dropbear,ssh,etc.,etc.
you need to get CWM or the stock IO recovery on the device, prior to being able to flash.
Click to expand...
Click to collapse
What tools pack are you referring to? Can't seem to find something relating to that on the forum.
I feel like an idiot because it just seems like if i restart the process, I'll lose CWM again and be back where I am right now. If I could just get fastboot to work this whole thing would be a lot easier because I could just flash CWM without root.
ralexand said:
What tools pack are you referring to? Can't seem to find something relating to that on the forum.
I feel like an idiot because it just seems like if i restart the process, I'll lose CWM again and be back where I am right now. If I could just get fastboot to work this whole thing would be a lot easier because I could just flash CWM without root.
Click to expand...
Click to collapse
http://droidbasement.com/db-blog
XDA:
[Tools] – SU/BusyBox/Misc – Galaxy Tab 10.1 (Update: 6/18/11)
this sends you to droidbasement.
pershoot said:
in order to do adb reboot recovery you need a rooted boot.
flash the latest tools pack, and you will get root/adb root shell/busybox,dropbear,ssh,etc.,etc.
you need to get CWM or the stock IO recovery on the device, prior to being able to flash.
Click to expand...
Click to collapse
As with most issues, mine turned out to be user error. I forgot to re-flash the root.zip file after flashing the 3.1 update. That prevented me from being ablet o reboot into CWM.
Started from step 1, and flashed the root file after the 3.1 update and now i'm fine.
Thanks!
ralexand said:
(Q) Should I follow these instructions for an IO edition tab? Or should I just use the fastboot flash [cwm recover] and flash the zips through that?
Click to expand...
Click to collapse
This is only really known for certain to work on a retail locked or unlocked version. Not certain about the google i/o version but will ask around for you. But nothing here says that version is supported using this method.
However, i see no reason why it won't work though, assuming you only flash the root exploit.
For instructions specific to your model though, refer to this thread
Berner said:
The so-called "Mount device as USB Mass storage" thread has nothing to do with mounting the device as Mass Storage. It only tells you how to mount as MTP, which can be done without any of the steps mentioned in the thread. Seriously, it doesn't belong on this list.
Also, you should include instructions for using nvflash to install a custom recovery. I found it much easier and safer to root through this method than through Odin.
Click to expand...
Click to collapse
Thanks, removed the usb thingy, however, it would be nice if you also contributed a link to the nvflash method so i could update the thread. its not my thread you know? it belongs to all of us. How good this thread ends up being all boils down to how helpful we all are.
ralexand said:
As with most issues, mine turned out to be user error. I forgot to re-flash the root.zip file after flashing the 3.1 update. That prevented me from being ablet o reboot into CWM.
Started from step 1, and flashed the root file after the 3.1 update and now i'm fine.
Thanks!
Click to expand...
Click to collapse
Glad to see you are sorted
Please everyone... carefully follow the instructions!!!
On another note, does this mean that this process works on a google i/o device already on android 3.1? Please let me know so i can update
however, it would be nice if you also contributed a link to the nvflash method so i could update the thread. its not my thread you know? it belongs to all of us. How good this thread ends up being all boils down to how helpful we all are.
Click to expand...
Click to collapse
Posts 1 & 2 of them most viewed thread in this forum. http://forum.xda-developers.com/showpost.php?p=14866263&postcount=2
Berner said:
Posts 1 & 2 of them most viewed thread in this forum. http://forum.xda-developers.com/showpost.php?p=14866263&postcount=2
Click to expand...
Click to collapse
Well, i put it up and took it out again, there is currently a much, much, much easier and direct method to root the device. And one that I am sure you will agree is by far more straight forward.
Lorddeff07 said:
This is only really known for certain to work on a retail locked or unlocked version. Not certain about the google i/o version but will ask around for you. But nothing here says that version is supported using this method.
However, i see no reason why it won't work though, assuming you only flash the root exploit.
For instructions specific to your model though, refer to this thread
Click to expand...
Click to collapse
I'm not sure if it's just my version of the I/O Tab, or all I/O Tabs, but one key thing is that I could NOT boot into recovery on a non-rooted 3.1 Edition.
On 3.1, adb reboot recovery would simply reboot my device. I cannot use the POW + VOL DOWN button combination because I am presented with a USB icon on the left (which takes you to fastboot - which would not work for me), and the ODIN Download Icon on the right.
So, the only changes to the instructions with regards to an IO tab is to remove any reference to "POWER + VOL DOWN" as the method of getting into recovery. IT MUST be done via a command -- either adb reboot recovery or using Rom Manager to boot into CWM.
Exact steps for me (brief):
1. ODIN to revert to 3.0.1
2. reboot the device, turn on USB Debugging
3. connect to computer and use ADB to "adb reboot recovery" then install root zip file once you get into the stock recovery
4. Reboot - install Rom Manager and Clockwork Mod.
5. Reboot into CWM
6. Install the 3.1 Update AND [before rebooting] re-install the root zip file
7. Voila!
Only thing is -- now that I am on 3.1, the only way for me to get into recovery is via Rom Manager because the 'adb reboot recovery' function only reboots the devices, and the button combination trick still does not work.
EDIT: paragraph above is not entirely true -- i can open a terminal on my Tab and type 'reboot recovery' to get back into recovery. So, it's just adb & the button combination that does not work.
I still cannot figure out why I cannot get fastboot to work. My computer even seems to recognize that I have a fastboot device connected, but I cannot send any fastboot commands; even fastboot devices returns nothing.
Appreciate all the help testing! Will keep this thread around if more issues are encountered.
For the time being I'm going to close down this thread as I've posted a new official thread!
Thanks everybody, especially PirateGhost!
New official thread: http://forum.xda-developers.com/showthread.php?p=20926830
Goal:
Working on making kernel flashing on the HTC Vivid / Holiday a few steps easier/simpler!
Background:
The HTC unlock method has been out for the last 6 months on the HTC EVO 3D. We've developed some work around methods to make things simpler for both the developers and the users who are stuck using the HTC unlock method.
How:
Fact for EVO 3D and theory for Vivid: The HTC unlock method only allows write access to the kernel (boot partition) in either fastboot mode or the normal android mode.
This means a custom kernel can only be loaded in two modes, either through fastboot or while in the standard Android mode.
Tool:
Flash Image GUI is an application I wrote to load the kernel and modules while in standard Android mode. This eliminates the need for using fastboot which requires a computer and will eliminate the need for using the Windows dependent .bat files for automating the fastboot flashing process. This will also eliminate the need to reboot into fastboot mode.
Current Status:
An updated Flash Image GUI code to support the HTC Vivid device but need a few testers to verify it all works properly on their devices!
Testing Location:
Either post back in this thread if you're able to help or join us on IRC - irc.freenode.net #gen-dev
Testing Steps:
Would recommend joining the irc channel for more detailed assistance but if you'd prefer to test and post in this thread, here are the steps:
**Wild Child told me there is no kernel backup support yet**
Stock Kernel Signed - http://w1z4rd.net/boot.img (Thanks IanWizard)
Stock Kernel Unsigned - http://joeykrim.com/evo3d/files/boot-unsigned-holiday.img
Skip straight to Step 5. The above links can be used to restore the kernel back to 100% stock.
1) Downloading clockworkmod recovery for your device to your local desktop
2) fastboot boot c:\downloads\cwm-recovery.img
3) Make a nandroid of all partitions (will need this in case there are any issues)
4) Reboot into normal android mode
5) Install Flash Image GUI - http://joeykrim.com/evo3d/files/FlashImageGUI.apk
6) Download a kernel to flash - list provided below
7) Push kernel .zip file to /sdcard (either usb mount the device or adb push c:\downloads\kernel.zip /sdcard/kernel.zip
8) Open Flash Image GUI - make a note of the kernel version displayed at the top of the application
9) Click browse and select the kernel .zip file from the sdcard
10) Flash the Image
**11) Reboot
12) Check the kernel version to see if the process worked (Either open Flash Image GUI and kernel version information will be at the top or Menu->Setting->About Phone -> Software Version -> More.
**If you're interested in testing the flashing of a kernel and ROM combination, at step 11, reboot into the standard recovery mode, where ClockworkMod should be loaded and flash the ROM .zip file
Steps to restore previous kernel before testing
1) fastboot boot c:\downloads\cwm-recovery.img
2) Restore Nandroid created in previous section step 3
Kernels to Test Flash:
Thanks to Dodgejcr for the stock vivid kernels for testing!
Stock Kernel boot.img zip with modified kernel version to verify flash worked properly
Stock Kernel anykernel .zip with modified kernel version to verify flash worked properly
PirateGhost Telstra boot.zip - This *probably* requires the associated ROM Raider .zip to be loaded. Don't flash this kernel unless you're also flashing the ROM .zip.
Thanks for the support and willingness to test!
awesome. i just went from stock rooted to my rom using this tool.
might i suggest a 'reboot to recovery for rom flashing' button? that would complete this little project, i think.
Good idea man. I'll surely add this to the superguide once a few more people test it. Less steps is always good.
Sent from my HTC PH39100 using xda premium
slapshot30 said:
Good idea man. I'll surely add this to the superguide once a few more people test it. Less steps is always good.
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
i am working with him on IRC to get a one-stop-shop for rooted users to flash a new rom. no more fastboot flash boot for the noobs!
LOL
You are still gonna keep the ROMs and kernals separate for people that would rather do it from adb/recovery right? Cause I've had terrible luck trying to take shortcuts using batches, programs and the like.
travisxcore said:
You are still gonna keep the ROMs and kernals separate for people that would rather do it from adb/recovery right? Cause I've had terrible luck trying to take shortcuts using batches, programs and the like.
Click to expand...
Click to collapse
the beauty of this tool is that you dont use batches and programs on your computer
its all on the phone and will boot you to recovery to flash the rom you want (as soon as he gets all the bugs worked out. im just the guinea pig here, inputting little value)
I've have been able to flash a kernel in recovery. I was using the first compile i think. First step I did was reboot recovery from advanced then I wiped dalvik and flashed the zip containing the kernel. It seemed to work anyways.
Sent from my HTC-X710a using XDA App
Pirateghost said:
i am working with him on IRC to get a one-stop-shop for rooted users to flash a new rom. no more fastboot flash boot for the noobs!
LOL
Click to expand...
Click to collapse
Thank God... lol
It hasn't gotten that bad yet, with not that many people needing to flash kernels, but I was waiting for the onslaught of problems involving it.
Pirateghost said:
the beauty of this tool is that you dont use batches and programs on your computer
its all on the phone and will boot you to recovery to flash the rom you want (as soon as he gets all the bugs worked out. im just the guinea pig here, inputting little value)
Click to expand...
Click to collapse
I'm still a little weary...idk I've never really liked not having control over something like this because if my phone bricks, at least I know its my fault. But I could see the benefit being out and just downloading the ROM/kernal straight to my phone and flashing it. And I definitely see the benefit for people that don't have a single clue what their doing. Would help cut down on the same 1000 help me posts...lol.
ToyGUN said:
I've have been able to flash a kernel in recovery. I was using the first compile i think. First step I did was reboot recovery from advanced then I wiped dalvik and flashed the zip containing the kernel. It seemed to work anyways.
Sent from my HTC-X710a using XDA App
Click to expand...
Click to collapse
bet it didnt flash a kernel even if it was included in the zip....
Appreciate all the help testing! Will keep this thread around if more issues are encountered.
For the time being I'm going to close down this thread as I've posted a new official thread!
Thanks everybody, especially PirateGhost!
New official thread: http://forum.xda-developers.com/showthread.php?p=20926830
OK, so I'm using ICS beta 4 for the Streak, and on ROM manager it says I have CWM 3.0.2. But when I try to boot into it, I either get stock recovery or fast boot. When I click on Software upgrade via update.pkg on SD card, on the stock recovery my screen turns blank and I have to hard reset.
Can someone help me get Clockwork Recovery please? Thanks!
PS. I used NVflash to flash ICS, don't know if that helps, but Im trying to provide sufficient information.
ICS B4 comes rooted with SuperUser7 and CWM 4.0.1.4 installed. Don't think that your supposed to use a ROM manager with it. Not sure how you have another CWM version unless you installed it yourself.
Reflash again and don't use the ROM manager app.
OK, well if it came with it, why can I not boot to it. I downloaded ROM manager but never used it. Never installed and other version of CWM, and if I did install another version, wouldn't I be able to see it? I can not boot to CWM.
Thanks for your suggestion, but reflashing is last option. Does anyone else think they know what's going on?
DO NOT USE ROM MANAGER!
First off, CWR isn't working very well right now, I have a new recovery image I've created that adds some functionality to recovery but its still a work in progress.
To get into recovery mode:
1) Power off device
2) Press Power and Volume+, hold
3) You will come into the Dell recovery menu
4) Use Volume (-) to get to "Install Package" and press Power to select
5) You are now in CWR
When I tried that it lagged a second and then booted normally. I'll post a video in a bit.
Oxymorphiend said:
When I tried that it lagged a second and then booted normally. I'll post a video in a bit.
Click to expand...
Click to collapse
Did you use ROM MANAGER and flash a recovery? If you did, recovery is hosed and you will have to fastboot flash the recovery from the B4 directory.
I did use rom manager. And where would I find it in the directory?
Oxymorphiend said:
I did use rom manager. And where would I find it in the directory?
Click to expand...
Click to collapse
Look in your ICS B4 download, you'll see "recovery.img" file.
Thank you both. I finally signed up when I had my first problem, and you guys hooked me up with speedy replies. Much appreciated.
i have a vivid with the OTA AT&T ICS update with unloacked bootloader and i flashed WCX ICS recovery....I want to flash a different recovery liek clockworkmod but i dont know how D:...can someone show me how to bceause i am still kidna new to rooting and stuff
>Download your favorite recovery .img
>Make sure bootloader is unlocked (should be already )
>Put phone into fastboot mode while connected to your computer
>Assuming you have the correct adb/device drivers/fastboot (again you should) open a command prompt in the same directory as your adb/fastboot/recovery.img
>flash your recovery.img
from the superthread read 3-4 times
3) (Optional) Flash a custom Kernel/Recovery (Three options, I suggest the FIRST)
*ATTENTION* IF FLASHING A KERNEL FOR A NEW ROM YOU WANT, YOU MUST FLASH THE ROM IMMEDIATELY AFTER FLASHING THE KERNEL WITHOUT BOOTING UP, THE KERNEL COMES FIRST. OTHERWISE, YOU MIGHT BOOT LOOP.
FIRST (AUTO) (joeykrim's FlashImageGUI method)
http://forum.xda-developers.com/show....php?t=1423151
OR
SECOND (AUTO) (xboarder56's method)
- First, turn off wifi on your phone
- If you have SetCPU installed or any other program where you have altered to overclock or underclock, DISABLE the "set on boot" option
- You will have to download Easy Kernel Flasher v03.zip which is attached below
- Next plug in your phone and make sure its getting detected
- After that extract the zip file (kernel flasher)
- Place the boot.img of the kernel you want flashed in the "Kernel-Here" folder.
- Make sure android debugging is enabled on your phone via settings
- Click Flash.bat for windows or Flash.sh for linux and wait for it to close terminal
- Wait for your phone to reboot and wait 5-10 minutes. Then reboot again and wait 5 minutes, then you're good to go!
http://forum.xda-developers.com/show....php?t=1328141
OR
THIRD (Manual) (Pirateghost's method)
- Extract the boot.img out of the kernel file you want and put it in the same directory as your fastboot.exe/fastboot executable
- Boot phone into hboot/bootloader (make sure you are in fastboot mode)
- Enter this code to flash the kernel and reboot the phone
Code:
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
download the Vivid All In One Kit its noob friendly hahaha
So the xboarder56 kernel tool flashes boot.img's for you?
As far as flashing kernals I just swap boot.img's in the data folder that's in the folder with the app
Sent from my HTC PH39100 using XDA
ENvisiNKeD said:
download the Vivid All In One Kit its noob friendly hahaha
Click to expand...
Click to collapse
i would suggest not to use that program just follow the steps above. some people have been having issue with that program.
ccb101 said:
i would suggest not to use that program just follow the steps above. some people have been having issue with that program.
Click to expand...
Click to collapse
As long as u follow all the instruction, manual or using vivid tools, u can flas CWM with easy.
Sent from my HTC Raider X710e using xda premium
Thanks for the info...I have trying to figure out how to do the same thing. I have clockworkmod now and was thinking.of changing...I just don't know if there is any better as clockwork is the only one I've tried..
Sent from my HTC PH39100 using xda premium
if wanting to flash the twerp recovery,i got a report of it bricking a phone earlier today....if your wanting to flash an older version of cwm it corrupts some of the memory partitions onn the phone....end choice is yours but you have been warned
Listen, I ported a version of TWRP 2 many months ago for personal use. I also have seen the source for the standard CWM used for the Vivid.
I can tell you one thing for certain. There are issues in the (Big issues in the first few releases, but there always are in new developments), but there still are a few issues & some features that just don't work in CWM.
In TWRP, there are also issues & that is why I abandoned it & never released anything. The TWRP recovery is neat because it is fully touch capable. However, there are issues with the current version that cause boot loops & the inability to enter into bootloader, fastboot or recovery. TWRP has also been known to cause some format errors for device internal storage.
It is my learned opinion, that the best recovery for the Vivid to date is the wcxrecovery. If you were to contact AmonRa & ask him who is one of the best still making recoveries (since he has pretty much retired from the task) he would tell you that GinM is one of the best guys to build the recovery. GinM is who built the WCX recovery. It has as many or more features than any other recovery available for the Vivid & more importantly, the wcxrecovery is built from scratch using Vivid source. It is not a ported recovery, it is a true Vivid built custom recovery with many functions.
The latest CWM recovery is okay. It is a decent recovery that does the basics. TWRP is neat, but still just a novelty at this point & I can tell you first hand that it causes issues, some serious, as of version 2.1.1.
WCXRecovery works solidly, has never caused me any of the issues that the others have, it can root a rom & has many developer friendly functions.
If you care more about Bells & Whistles than performance, then you can install any recovery over wcx. The only recovery that you cannot flash over was the first CWM release.
Flashing a recovery is as easy as using fastboot & typing a few commands or using a bat script. But why you would want to sacrifice performance for one feature (Touch Screen), is a bit beyond me.
TWRP has potential. But it is just not there yet & CWM is just missing too many of the features that dev's use, not too mention the backup options available with wcxrecovery.
The reason why I'm asking is because I used the all-in-one toolkit but it didnt root my phone and I just pressed flash wildchilds recovery and now I have it. Now there is a newguide showing how to root but I'm afriad I might brick my phone since it already has this recovery. The guide basically says to flash wcx recovery which I already have. Do u guys now If I do it again it might brick it?
Sent from my HTC PH39100 using XDA
You won't brick your phone by flashing the wcxrecovery again - it's just this command:
fastboot flash recovery wcxrecovery.img
in a command window.
You must be in the folder containing the wcxrecovery.img file, and fastboot.exe should be either there in the folder or in your PATH.
But, if you already have it, why flash it again?
---------- Post added at 04:39 PM ---------- Previous post was at 04:20 PM ----------
GSLEON3 said:
<snip>
WCXRecovery works solidly, has never caused me any of the issues that the others have, it can root a rom & has many developer friendly functions.
If you care more about Bells & Whistles than performance, then you can install any recovery over wcx. The only recovery that you cannot flash over was the first CWM release.
<snip>
Click to expand...
Click to collapse
GSLEON3 makes a good technical case for using the WCX recovery - I also think it's really easy to use and well designed.
You can use the touch buttons to browse thru the menus -
Home: Up,
Menu: Down,
Back: Back, and
Search: Select/Confirm
Anytime it asks you to press Power to confirm, you can just tap the search button.
That's enough 'touch' functionality for me, and when it comes to tools like recovery's, eye-candy is pretty much irrelevent.