[Q] LG KU5900 updated, crashed and... - LG Optimus Black

long story short....
i received a unit from a friend in korea (version with the olleh logo).
LG KU5900, updated using LGs downloadable updater, my mistake is that i didnt read up on the "proper procedure" of updating this one unit.
options on updating, i changed the country to my local (philippines). then proceeded with updating, about 3-5% it crashed while flashing it.
i tried using v10a as alternative, managed to flash it somewhat successfully, but lo and behold, no IMEI, no GSM signal.
i was wondering this unit only and will only accept v20l in its general function? or im sure i did or didnt do something right.
i used KDZ updater with the windows enable and whatnots.
im hoping this unit still has a chance of being reflashed to its former glory with a signal on it.
any ideas, opinions, suggestions, advices for a flash tool that will render this functional once more?
here's where the unit at.
functional, boots up, wifi bluetooth gps works. before that eventful update, the phone works, call and all, i can receive sms but cant send one.
what doesnt work. local gsm network (wcdma, i think). since when i flashed this, i left the kdz updater type on CDMA since there's no gsm/wcdma option to boot.
questions of mine...
can this be flashed using v10a since this is the native for philippines? or do i go back to v20l which is for korea?
which flash tool to use to activate gsm/wcdma?
links to tools? hopefully not megaupload.
guides?
any and all will help.
thank you very much.
ps - been reading up on gabwerk's (did i spell his name right?). on finding a clue to fix this.
pps - flashed this about 4-5 times already, no luck.
tried flashing with 3GQCT, still no luck on having signal.

KU5900 and P970 have different radio roms... Because you flashed P970's firmware, your modem (radio) isn't working.
Flash your phone with KDZU with one of these firmwares.
Or try again to flash in LG Mobile UPdater. It will download correct firmware by your IMEI number.

err yeah, that i did the first time when it crashed. must be compatibility with win 7 64.
KU5900 >> LG updater "country philippines language english" crashed while uncompressing.
already have the korean firmwares, im looking for an updater with a "wcdma or gsm" option on radio types.
so far kdz updater by marwin doesnt have that, only CDMA, 3GQCT, INFINEON, ODM...

gudlldvil said:
err yeah, that i did the first time when it crashed. must be compatibility with win 7 64.
KU5900 >> LG updater "country philippines language english" crashed while uncompressing.
already have the korean firmwares, im looking for an updater with a "wcdma or gsm" option on radio types.
so far kdz updater by marwin doesnt have that, only CDMA, 3GQCT, INFINEON, ODM...
Click to expand...
Click to collapse
You didn`t understand ! if your phone has cdma radio on it you cannot flash gsm or wcdma because radio chip will not accept. There are differences between frecvences.

aye, right now, managed to get it up and running, but somewhat still unstable, i cant download games on it, not even fruit ninja lolz. it kept saying insufficient memory.

Try to do a factory reset, often solves such problems, and if problems persist, try to flash it again.

...
ok guys.
used lge tool from a friend of mine, he fixed the eprom that was causing the initial error on the "no network / no signal" issue.
still on froyo v10a, then updated to v11c using updater, which turns out to be bouy update. now i got a french OS arrrrggggghhhh!!!!
right now, looking for GB update guide.
anyone with pointy ears can point me to the right direction?
ps - anyone got any good pointers on how to use the inactive 5gig? currently splicing v20l for comparisons with 10a and 11c...

Related

I screwed up my phone

Hello everybody, I think I screwed up, but CyanogenMod installed immediately after restart and then nothing worked: he is always in flight mode, I can not connect wireless or bluetooth disappeared and even the IMEI, on the menu CyanogenMod i restore the settings already manufactures but still same.
Any solution? I do not mind putting it under warranty but I have to delete the icon of the superuser ...
Thank you.
Seems like You did something to the baseband/RIL
Or... do you have the p990 O2X or the p999 G2X?
the ROMS are NOT same for the 2 phones...
thanks for the fast response, but whow i know if are one or other?
You can't install P999 CM on the P990, it has an assert check to prevent it. Look for a stock ROM thread in the dev section, this will get you back to stock, although I don't know if it'll get your IMEI back.
You don't know which phone you bought? G2x is T-mobile branded, has T-mobile logo above screeen instead of LG's
Don't worry, it's easy to reflash everything, just need to download right tools and follow a guide
ok, so i have the p990 O2X, what i do now?
I was in troubly with my o2x this weekend but following this process this saved it.
http://android.modaco.com/content/lg-optimus-2x-2x-modaco-com/335494/29-jun-smartflash-stock-baseband-release-1035-21-20110622/
(In the end it turned out I did not have to go back to stock ROM. I re-installed CM7 after wiping data/cache in recovery and that worked).
Im not sure if the smartflash tool will give your IMEI back...
i pick up therom for my country or other?
SaPires said:
i pick up therom for my country or other?
Click to expand...
Click to collapse
Yep. Your country if its there. It its not and you're in somewhere in europe get europe.
any ideia why i lost my IMEI?
No, but it's happened to some others as well.
http://forum.xda-developers.com/showthread.php?t=1040079
http://forum.xda-developers.com/showthread.php?t=1116677
http://forum.xda-developers.com/showthread.php?t=1148277
Maybe you should compare notes or something?
Thkns a lot to everone....
i will try later and i pos here the result...
Works
now i intalled the CM 7.1 but the Wirelees dont work with 69

[Q] V20b Newtork Problems?

Hello!
First of all, I am sorry if I have posted in a wrong section, but my OB gets me out of my mind! After I have upgraded to GB v20b, if I let it a couple of hours in stand-by mode or overnight, it looses network carrier signal! :|and I must turn-off and on again and again every time I want to make a call or I need the internet! Or sometimes after I insist on calls, 10 at number, it says "USIM loading complete" and starts calling. What should I do? Did I made something wrong?
Country: Romania
Android version: v2.3.4
Phone carrier when bought: Orange
SIM: Cosmote
Thanks!
Have you check the mobile network setting?
Maybe there's something wrong in there
Like,if it search manually or else then switch it to auto and in reverse
Give it a shot,maybe it helps
Sent from derp-mobile
Nope, nothing change... It remains blocked.. I will try to change the S/W or to put another ROM Thanks anyway!
Okay,no problem
Sent from derp-mobile
Still no positive result I`m still fighting with it... I have installed both v20n and custom zeus, and tested... and nothing changes... after a couple of hours, it loses the network what can I do else?
Either try to flash back to your stock ROM, or flash back to an unrooted version, that is availible for your device and return it to your provider. They will repair it.
You should check the network band for your contry and then choose rom's acording. If you install rom's working on another bands it happens. To me that's a very common problem when intalling european rom's to work in my LatAm bands
Enviado desde mi LG Optimus Black via Tapatalk!
Ok! Thanks guys! Firstly I will check the network band and try a new rom, and if it doesnt work, I`ll reflash it with the original F/W and send back to warranty. Thanks a lot!

lg P925p differences.?

Well, this is the third thrill under warranty I get. This one still arrived with froyo. I cant seem to update to gingerbread with the lg updated. Tried following the kdz installation post but would not flash., kept telling me the phone was up to date. Any clues..? This will be my test phone as I just got a vivid.
You have to follow the directions on how to flash kdz and returning to stock tread in development thread
From what I know,the P on the end is just specific to the carrier,I am on rogers and mine ends in G(p925g) With so many different providers carrying eseentially the same phone,just different stock OS bloated with their provider junk LG has to do something to seperate the devices based off carrier. I find it strange that you cannot update,as it seems that there is an official ATT update for GB now. Have you had any luck?
No luck, att has a regular P925, the P925p is very rare and will not update via the update. I tried the kdz flash instructions and did not work. I will try it on an xp machine as i did it on a windows 7.
gentzleon said:
No luck, att has a regular P925, the P925p is very rare and will not update via the update. I tried the kdz flash instructions and did not work. I will try it on an xp machine as i did it on a windows 7.
Click to expand...
Click to collapse
I also have the p925p version I have tried updating to ICS, If you have the LG support tool and click customer support look under supporting models and the p925p can only be updated to v20p which is Gingerbread, look at the regular p925 and it says v30b which is ICS, any suggestions?
Does anyone know if the P925p can be manually updated to the official ICS with the kbz files?
The phone I have says p925 on it behind the battery and in the software, the only place where it says it's p925p is when trying to use the POS LG support tool. Tells me my phone is already up to date etc...
Looking to find out if this thing can be updated manually with the official ics from att or not.
So [email protected]#$ing annoying, twice it's started the upgrade for ICS with the LG Upgrade Too, but it eventually always stops with "problem communicating with phone" then when you restart the program it tells you no update for P925p phone is up to date.
Last time I did the phone recovery, and it automatically did a restore, then said there is an update for ICS, then back to the problem communicating BS (stops when it says checking phone #, I don't have a AT&T sim in there right now) I tried without a sim and with a t-mobile sim same issue. Eventually says no update available.
Has anyone been able to get ICS on the P925p version??
Edit: I was able to get the phone updated see below
Thanks
Just an update and some info to add about the P925p.
The P925p is the same as the P925, there is no difference. LG's Support Tool telling you that your phones is a P925p is bogus / a bug. I spent a few hours on the phone with LG support, several techs. They all confirmed that the phone is P925. P925p is the exact same phone, just when its in Korea, they will recognize it as a P925p. So ignore the POS LG Support tool telling you your phone is P925p and that there is no update available for your phone.
There is a way around this error (telling you your phone is P925p and no update available). Uninstall the LG Support Tool, uninstall the drivers and reinstall the drivers, install the LG Support Tool. Sometimes you need to install the driver from the Support Tool, instead of before.
Then it will tell you there is an update.
My issue was that it would begin the update but always stop and say "PROBLEM COMMUNICATING BETWEEN PHONE AND PC" so I could never get it to update.
I had to follow this guide to get it to update http://www.lg-phones.org/how-to-flash-unbrick-lg-thrill-4g-back-to-stock.html (make sure you pick the ICS KDZ file 30B when you get to that step so download that first)
Even using this guide I ran into the problem communicating between phone and PC error again, but just pushed restart a few times and it finally worked.
Bottom line is your phone is P925 not P925p
Note: If you still have issues with the LG Support Tool, sometimes picking Change Country and setting it to another country, then setting it back to USA helps.

[Q] LG Optimus 2x (Su660)

Hi everyone,
I just bought LG Optimus 2x SU660. Currently the phone is on android version 2.2.2 i tried to update it through LGMobile Support Tool but it says there is no update for this phone. i want to update it on gingerbread. i searched for its stock rom of gingerbread but i didn't find it. Another issue is it doesn't recognize my sim, there is a cross mark above the signals sign. I am in Pakistan and we have different carrier i tried them all, one of them worked fine and shows signal properly but i can't make or receive any call. what i think may be the cell is locked on T network and there's another option of 3g and some application just show something in korean with USIM mentioned. can anyone of you please tell me the possible solution for this issue and also where can i have stock rom for gingerbreag plus how can i install it on my phone.
Thanks a lot in advance.
Gud day!
SU660 stuck to cwm rocovery mode
hi all,
i have done something really nasty to my fone.
i asked for the help on above post after that i searched a lot of forums and found this link
http://forum.xda-developers.com/showthread.php?t=1889328
i followed it and update my su660 to ics 4.0.4 but signal problem still exist.
then i thought to install custom rom so i rooted my cell with unlockroot 2.3 and my su660 got rooted.
after that i want to install cwm 5.0.2.7 using rom manager but it says there is no cwm for SU660.
i downloaded cwm 5.0.2.7 from this link
http://optimus-android.blogspot.com/2012/03/how-to-install-ice-cream-sandwich-ics.html
and tried to install but it get error on commandline screen "apx driver error" or something like it.
i searched and install apx drivers but no gain.
then i found this link on xda
http://forum.xda-developers.com/showthread.php?t=2072141
i used nv.rar mentioned on the page and successfully run it. after that my su660 get into recovery mode and i saw recovery menu but i can't do any thing
when i try option "reboot system now" it reboot system but gain start in recovery mode.
when i try to install rom from internal sd it say
E: can't mount /emmc/
when i try to switch it in APX mode screen say "s/w and something in korean language"
when ever i restart by pulling battery out and then in it goes to recovery menu.
in short i am just stuck to the recovery mode.
i dont know what to do know i explored many forums but didn't found any solution.
help from you all is highly appreciated, thanks in advance buddies!
one thing more i am using windows xp.
except then one successful cwm recovery that was done on windows 7 on my office machine.
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Stuck at LG logo
SubZero.it said:
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Click to expand...
Click to collapse
thanks alot for your kind reply. i actually changed that set that might had some hardware issue. i got another Su660 and worked fine for me, i tried to update it on ics 4 using the following link but unfortunately it shows timeout error after 'partition' command.
http://forum.xda-developers.com/showthread.php?t=1889328
then my SU660 restarted and stuck on lg logo.
i tried to use nvflsh with the help of the following link
http://forum.xda-developers.com/showthread.php?t=1867292
but it throws error "Bootloader failed NvEror 0x0
Command filue: bootloader download failed
press any key to continue...."
(see attached file)
can you please help me to rectify it?? i seached alot but didn't find any solution.
thanks alot in advance.
SubZero.it said:
So it seems that you semi-bricked your phone.
To get it back working you have to flash an Nvflash compatible rom like V10B (if I remember right) and then re-smartflash to the ICS latest V30B.
I don't know why you bought an SU660. That model is made for Asia and I don't think it support the different frequences we are using here. They made it for that purpose. Good Luck!
Click to expand...
Click to collapse
i also tried this
http://forum.xda-developers.com/showthread.php?t=2072141
nv.rar special package for SU660 by "bitdomo"
but again same error i mentioned in previous post
Hali Siddiqui said:
i also tried this
http://forum.xda-developers.com/showthread.php?t=2072141
nv.rar special package for SU660 by "bitdomo"
but again same error i mentioned in previous post
Click to expand...
Click to collapse
hi everyone,
i just installed ICS 4 using following link
http://forum.xda-developers.com/showthread.php?t=1889328
All i did was just change my data cable and it is done
i am mentioning it if any one may visit this, the post can be more usefull for him
and thanks to everyone
Enjoy
Hali Siddiqui said:
Hi everyone,
I just bought LG Optimus 2x SU660. Currently the phone is on android version 2.2.2 i tried to update it through LGMobile Support Tool but it says there is no update for this phone. i want to update it on gingerbread. i searched for its stock rom of gingerbread but i didn't find it. Another issue is it doesn't recognize my sim, there is a cross mark above the signals sign. I am in Pakistan and we have different carrier i tried them all, one of them worked fine and shows signal properly but i can't make or receive any call. what i think may be the cell is locked on T network and there's another option of 3g and some application just show something in korean with USIM mentioned. can anyone of you please tell me the possible solution for this issue and also where can i have stock rom for gingerbreag plus how can i install it on my phone.
Thanks a lot in advance.
Gud day!
Click to expand...
Click to collapse
I bought su660 in november 2012. it was with 2.2.2 too. Few times i have flashed it, but after i flash back 2.2.2. After that with Lg mobile support tool it's updated to 2.3.4 with out problems. And after update it's updated again with LG mobile support tool to 4.0.4 v30C

[HELP] Need LG Optimus 4X new baseband(v20c october 2014)

hello all. my phone shows "reorganizing internal processes" whenever i try to make a call. bcoz of this it is unusable as a phone.
also imei is null, baseband is unknown and cellular is in NO SERVICE.
nothing works: tried reboot,
other roms (cm 11, zaiben, mahdi etc..),GetRIL app...
also i tried to flash latest v20c but it always stuck at 10%..
but i can flash anything from cwm(philz touch)
so can anyone please help me with the so said baseband in cwm flashable format or a cwm backup of latest v20c update?
i'll be grateful to anyone who looks into this issue.
thanks in advance.:good::good:
Hi,
I will have your thread moved to your device section.
Good luck!
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
i"ll try upload you stock partitions to flash ***when i find some free time***
Marko055 said:
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
Click to expand...
Click to collapse
yes i tried flashing latest v20c and v20b.. but always stuck at 10%.. tried 3 different pcs and cables and latest method of kdz flashing too.. still no luck:crying:
Any updates on this?? anyone?
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Marko055 said:
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Click to expand...
Click to collapse
dude, i cant "FLASH". thats the problem
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Yeah, the 4X is nearly unbrickable. Even when nothing works, LG Mobile support tool can get it back with a stock rom.
I am in Portugal and have the same problem. I read in a different thread that the problem of "reorganizing internal processes" is in fact a crash of the phone/radio process, due to hardware bug that stucks when both voice and data communications are requested at the same time in a 3G network. I'm not sure if even V20C can correct the problem. One solution is to switch to 2G in general, (EDGE data speeds... )and you won't have problems, When needing for a particular download, switch temporarly to 3G.
But if anyone have a 3G stable solution, please share as I am also highly interested!
I tried stock JB. In custom CM roms, for instance 4.4.4 (is what I have now), you won't have a "reorganizing..." message, but you will loose completely mobile communications when the problem occurs, and only a phone reboot will recover it
SHA_NDY said:
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Click to expand...
Click to collapse
tried that already. it stops at 10%. says retry. no go.
ismayeel25 said:
tried that already. it stops at 10%. says retry. no go.
Click to expand...
Click to collapse
I did have sam problem wiht 10% thingy but I use the LGFlashtool2014 from the forum:
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
(credit to proper uploader, I dont remember where did I get it, sorry)
The problem causes by LG update software when you kdz from 20A to B or C.
about the IMEI the V20C not really solve my problem but it' sustainable.
Bests of luck.
Thanks. i'll try it.
any chance

Categories

Resources