Related
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)
worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...
I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.
...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."
yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje
cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.
http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje
Ok boys and girls... Just got phone replacement and it comes with stock froyo.... having a heck of a time installing cwm. Tried the various attempts and even installed the hacked 3e.... Still cant get it to take.... Any ideas?
What happens when you try? Details man!!
Also the thread title and the question are COMPLETELY DIFFERENT???
basically, before you guys judge, why would i need a pattern bypass, let me get through the story.
Basically, my tenant couldnt pay her rent, so she decided to give me half and leave. when she left, she also left her dell streak. i gave her a call and she told me i can just have it. when i tried to turn it on, it wouldnt so i charged it. waited a while, say 6 hours, then when i got back to it, there was a pattern lock. called her again but unfortunately, her cell phone line got deactivated. its been 2 days, and ive been trying but no luck.
basically, i just need a program, software, anything? lol. to bypass this because i want to sell it, or maybe try to fall in love with it
*things i have tried*
[1.] Vol up + Power
~brings me to (stock??) recovery (im guessing?) with 5 choices.
0. Boot Up
1. Factory reset (User data only)
2. Software upgrade via update.pkg on SD card
3. Factory reset (User data and Internal Tablet storage)
4. Power off
~Chose #1 which failed
~Chose #3 also failed
both booted up perfectly and still showed the pattern unlock screen.
[2.] Followed a guide
~i basically treated the streak like it was bricked, so i fallowed a guide from illdill (sorry i forgot the link) but it was something related to nvflash and using it to flash images 2-21 on the dell streak 7.
~this method also failed, and also booted up perfectly.
*[3.] Try to put HoneyStreak RC 2.1*
~i get the error "Formatting partition 2 BCT please wait.. FAILED!"
idk what i means but all i know is that when i used the search button, i guess peoples who ask about it and have trouble about it, they get ignored. they try to bump, but yet no response. I read from post 427 to almost 560. none was answered. if there is a way out there. please help me ;(
only 2 methods i tried. anyone else? thanks in advance xda users. quick responses that arent usually nonsense gets a thank button clicked from me
jayjaypops said:
basically, before you guys judge, why would i need a pattern bypass, let me get through the story.
Basically, my tenant couldnt pay her rent, so she decided to give me half and leave. when she left, she also left her dell streak. i gave her a call and she told me i can just have it. when i tried to turn it on, it wouldnt so i charged it. waited a while, say 6 hours, then when i got back to it, there was a pattern lock. called him again but unfortunately, his cell phone line got deactivated. its been 2 days, and ive been trying but no luck.
basically, i just need a program, software, anything? lol. to bypass this because i want to sell it, or maybe try to fall in love with it
*things i have tried*
[1.] Vol up + Power
~brings me to (stock??) recovery (im guessing?) with 5 choices.
0. Boot Up
1. Factory reset (User data only)
2. Software upgrade via update.pkg on SD card
3. Factory reset (User data and Internal Tablet storage)
4. Power off
~Chose #1 which failed
~Chose #3 also failed
both booted up perfectly and still showed the pattern unlock screen.
[2.] Followed a guide
~i basically treated the streak like it was bricked, so i fallowed a guide from illdill (sorry i forgot the link) but it was something related to nvflash and using it to flash images 2-21 on the dell streak 7.
~this method also failed, and also booted up perfectly.
only 2 methods i tried. anyone else? thanks in advance xda users. quick responses that arent usually nonsense gets a thank button clicked from me
Click to expand...
Click to collapse
Try flashing Honeystreak (it completely erases the internal memory since it needs to repartition it) if you like Honeystreak, keep it, if you want stock, flash back. Hopefully that will work.
bluesy_92 said:
Try flashing Honeystreak (it completely erases the internal memory since it needs to repartition it) if you like Honeystreak, keep it, if you want stock, flash back. Hopefully that will work.
Click to expand...
Click to collapse
thanks for quick response, ill try and see, most of the things im reading are, i have to atleast have CWR. which i highly doubt she has. when i tried to explain to her what "rooting" means, lets just say she wasnt interested at all.
unfortunately, it didnt work. somethings about "Formatting partition 2 BCT please wait.. FAILED!" and doesnt go through, that makes method 3 = failed. unless someone out there has a different suggestion?
thanks in advance
Uh...it failed to format the partition? I don't think I've ever seen that happen.
I know this will sound stupid, since you are probably in the right forum, but where you said "streak" are you sure it was the 7 inch and not the 5? Also, you said you got into recovery by volume UP and power, but I think volume DOWN and power is stock recovery...maybe it had CWM installed by someone who has used it before? (the options sound like CWM) and in that case, someone may have changed something. Again, I'm shooting in the dark, but if it is a streak 5, or if it has CWM, it would be different than just a stock Streak 7 on the lockscreen. The streak 5 and 7 are not just different sizes of the same device - they run on a different chipset. The 5 has a snapdragon (I believe) and the 7 has a Tegra 2.
EDIT: You said Streak 7 in the title, so...I'm pretty sure you know it's a 7. In that case, I don't know why it won't flash :-/
bluesy_92 said:
Uh...it failed to format the partition? I don't think I've ever seen that happen.
I know this will sound stupid, since you are probably in the right forum, but where you said "streak" are you sure it was the 7 inch and not the 5? Also, you said you got into recovery by volume UP and power, but I think volume DOWN and power is stock recovery...maybe it had CWM installed by someone who has used it before? (the options sound like CWM) and in that case, someone may have changed something. Again, I'm shooting in the dark, but if it is a streak 5, or if it has CWM, it would be different than just a stock Streak 7 on the lockscreen. The streak 5 and 7 are not just different sizes of the same device - they run on a different chipset. The 5 has a snapdragon (I believe) and the 7 has a Tegra 2.
Click to expand...
Click to collapse
ahhh, thank you. first off, the partition, basically it looks like this (http://forum.xda-developers.com/showpost.php?p=15109690&postcount=425). i have no idea why it fails.
the only ways i could tell it "might be" a streak 7 is....
stock, Volume Up+Power is stock recovery menu. Volume Down+power is USB Fastboot. Has red letters as well.
now. is there anything visible or any button power combo where i would be able to find out if this was a dell streak 5 or 7? sorry for the nweb question.
*fyi, i know how CMW looks like, i have owned many android devices and... lets just say trust me... the Volume Up+Power looks like stock recovery and the only reason i say this is because it has 5 options, and 2 of them are Factory Reset.
Thanks again for quick response!
Other than the screen size, the capacitive buttons are layed out differently. On the streak 5, they are equally spaced, wheras the Streak 7 has them placed so that in landscape, they would all be under your thumb. The Streak 5 also has a removable battery, and the Streak 7 does not. If you check the back and it is smooth with a removable battery, it's a 5. If it is lightly textured without a removable battery, it is a 7.
Hope this helps
EDIT: And as far as the partition, I still don't know what would cause the problem. It might be best to ask someone with more NVFlash experience than me
bluesy_92 said:
Other than the screen size, the capacitive buttons are layed out differently. On the streak 5, they are equally spaced, wheras the Streak 7 has them placed so that in landscape, they would all be under your thumb. The Streak 5 also has a removable battery, and the Streak 7 does not. If you check the back and it is smooth with a removable battery, it's a 5. If it is lightly textured without a removable battery, it is a 7.
Hope this helps
EDIT: And as far as the partition, I still don't know what would cause the problem. It might be best to ask someone with more NVFlash experience than me
Click to expand...
Click to collapse
perfect bluesy_92. you've helped me so much already even thought my dell streak is still "unable to be used" now im for sure guarenteed this is a dell streak 7 (lol) since there is no removable battery and the c buttons are right under my thumb landscape wise.
as for the partition, would you help me figure out? ill sorta spam (not really) on the development thread for anyone who has nvflash experience to help me out with my streak.
as for others who click on this thread and do read and by any chance know any nvflash experience. please do help and just jump right in. thanks so much XDA community providers lets see if we can get through a bypass.
as of things to try
as of things to try in the morning when i wake up for work
the only thing im missing now is my adapter for my miniSD card to stick it in my streak and do the update.pkg file from the stock recovery menu. idk if it will bring me far because at work, i have internet access all day via phone (htc sensation) and i can try to keep update with my xda app but i have no desktop whatsoever.
jayjaypops said:
perfect bluesy_92. you've helped me so much already even thought my dell streak is still "unable to be used" now im for sure guarenteed this is a dell streak 7 (lol) since there is no removable battery and the c buttons are right under my thumb landscape wise.
as for the partition, would you help me figure out? ill sorta spam (not really) on the development thread for anyone who has nvflash experience to help me out with my streak.
as for others who click on this thread and do read and by any chance know any nvflash experience. please do help and just jump right in. thanks so much XDA community providers lets see if we can get through a bypass.
Click to expand...
Click to collapse
Well, I've heard of people getting devices that are locked in read-only, basically making them unable to be flashed. The fact that nothing is working scares me that this may be the case, but at the same time, I never experienced it, so I definately can't be sure. Someone who has may be able to tell you if you're stuck. If it is read-only, your only hope is Dell by that point :-/
That's the first thing I think you should find out. Because if it is locked in read-only, your case is pretty much closed at that point (and not in a good way, unless Dell helps you.) If you find out it's not, then I would try to figure out why Honeystreak isn't flashing properly.
You can try update.pkg - everything is worth a shot, but unlike flashing Honeystreak, I think it won't repartition or anything (updating through a .pkg is the way manufacturers release updates - it was not designed to be harmful to the users data, afaik) so that's not exactly a sure-thing. Don't let that stop you from trying it, though - when something can't be used at all, any idea is a good idea
bluesy_92 said:
Well, I've heard of people getting devices that are locked in read-only, basically making them unable to be flashed. The fact that nothing is working scares me that this may be the case, but at the same time, I never experienced it, so I definately can't be sure. Someone who has may be able to tell you if you're stuck. If it is read-only, your only hope is Dell by that point :-/
That's the first thing I think you should find out. Because if it is locked in read-only, your case is pretty much closed at that point (and not in a good way, unless Dell helps you.) If you find out it's not, then I would try to figure out why Honeystreak isn't flashing properly.
You can try update.pkg - everything is worth a shot, but unlike flashing Honeystreak, I think it won't repartition or anything (updating through a .pkg is the way manufacturers release updates - it was not designed to be harmful to the users data, afaik) so that's not exactly a sure-thing. Don't let that stop you from trying it, though - when something can't be used at all, any idea is a good idea
Click to expand...
Click to collapse
well, im not really trying to flash anything, i dont even care if its rooted or not, i just want it to be working basically. so my son can watch his elmo while i play my game or update my roms or watch my movies without him whining anything just to make it stock perfect again and this bypass to go through >__<"
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Are you sure you had it in apx mode ?
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Just put the image file into your fastboot directory and boot it from your computers hard drive ( fastboot boot cwm.img )
pyraxiate said:
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Are you sure you had it in apx mode ?
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Just put the image file into your fastboot directory and boot it from your computers hard drive ( fastboot boot cwm.img )
Click to expand...
Click to collapse
re read past posts?
pyraxiate said:
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Click to expand...
Click to collapse
this is what it looks like when i double click download.bat (http://forum.xda-developers.com/showpost.php?p=15109690&postcount=425) it gives me a FAILED!
pyraxiate said:
Are you sure you had it in apx mode ?
Click to expand...
Click to collapse
hold down Volume up + Volume down while plugging the USB cable in? Pretty sure i am because the first time i got prompted on my computer, i already downloaded the drivers, i just had to direct it to find the drivers, it said APX mode.
pyraxiate said:
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Click to expand...
Click to collapse
when you double click download.bat, after the img file 14 or 15 goes through, does your command screen suddenly disappear? whats your next step through that?
I flashed using these partition images ( Not the ones in the initial NVflash post) Maybe your image files were corrupted on download. Im glad someone uploaded them in 1 rar to ensure a clean set
Id start over from scratch by using this rar as your c:\Nvflash directory
http://www.multiupload.com/OM0VO9HBO9
See if those make a difference. After Nvflash completes the box will close, its normal. Use the pinhole to reset. From there I just used fastboot ( vol down and power ) to boot into cwm ( i can dropbox the image if you need it ). The command is : fastboot boot cwmimagename.img
from there you can format data/cache/system/dalvik/storage ( mine came back with an error not being able to format a few but try it anyway)
Mount SD card and copy something like the streakdroid zip to it. Using CWM's menus, install a zip from SDcard and choose it. It should run w/o error.
I had the Dell logo only stuck on boot after that , so I went into recovery and formatted user data only . From there it booted right up.
When you boot your streak, does it still boot into the original rom or does it just freeze on the Dell logo?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
pyraxiate said:
I flashed using these partition images ( Not the ones in the initial NVflash post) Maybe your image files were corrupted on download. Im glad someone uploaded them in 1 rar to ensure a clean set
Id start over from scratch by using this rar as your c:\Nvflash directory
http://www.multiupload.com/OM0VO9HBO9
See if those make a difference. After Nvflash completes the box will close, its normal. Use the pinhole to reset. From there I just used fastboot ( vol down and power ) to boot into cwm ( i can dropbox the image if you need it ). The command is : fastboot boot cwmimagename.img
from there you can format data/cache/system/dalvik/storage ( mine came back with an error not being able to format a few but try it anyway)
Mount SD card and copy something like the streakdroid zip to it. Using CWM's menus, install a zip from SDcard and choose it. It should run w/o error.
I had the Dell logo only stuck on boot after that , so I went into recovery and formatted user data only . From there it booted right up.
Click to expand...
Click to collapse
sorry for the late reply, i just barely got home from work. i just bought myself a 2 gig micro sd card, and the adapter to stick the micro sd card in the bigger sd card. im going to try the update.pkg. unfortunate of me, i tried to do it right away but its low battery just my luck. charging the streak 7 right now.
pyraxiate said:
When you boot your streak, does it still boot into the original rom or does it just freeze on the Dell logo?
Click to expand...
Click to collapse
not even, it would boot original rom with the users data still enabled. (the reason i say this is because, the pattern lock is still there) even when i tried the nvflash, it would boot right up to the pattern lock and with the same background she always had.
idea
since i now have an sd card, im going to try the "Restore your DS7" but the only thing thats stopping me is that it requires CWR which i dont have. ill try to work around it since my DS7 is recognized by fastboot and ADB. Also wanted to add another misfortune of mine, she does have debug mode on but fastboot should work rather than ADB. wish me luck.
if anyone has any other suggestions or ideas, please budge in. i dont mind at all. thanks for the help all!
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Click to expand...
Click to collapse
sorry lufc. thanks for moving. i apologize. just stressed out from real life events. arent we all ? aha. thanks and im sorry once again!
jayjaypops said:
since i now have an sd card, im going to try the "Restore your DS7"
Click to expand...
Click to collapse
failed, right when i typed adb devices, it shows my DS7 numbers, but when i type adb shell, i dont get ~# sign back. i get an error: Closed!
here i come nvflash. i shall try you again with the help of "pyraxiate" link he used to restore his DS7. wish me luck!
here i come nvflash. i shall try you again with the help of "pyraxiate" link he used to restore his DS7. wish me luck!
Click to expand...
Click to collapse
failed aswell, after double clicking restore.bat, i let it do its own thing, after it pushes p14.img file, it closes the command box right away, so i used an earring to turn off the device, unplugged from the usb, and yet, it still loads up pefectly with the same wallpaper and still the pattern lock... ughh, this is really frustrating!! ;'(
im trying one last step, before i call dell... (i dont even know if they'll replace this since im not the owner or the buyer of the product. unless they will? let me know)
my last step im taking is, im gonna use nvflash again, but this time im gonna use the WIFI DS7 partitions. hopefully it works. please almight lord! *sniff* begging. wish me luck. ill update
and as you already know what im going to say next, if anyone out there has any suggestions, ideas or plans. please help me out. might help others out in the community. thanks so much in advance
The other day I pulled out my original preordered g1 with a broken screen. got on ebay and replaced my screen. I am rooted with an older cyanmod rom. Now I usually dont post because im a good ressarcher. But im lost. Did a full wipe and dont have a network connection to get past gmail set up. All I can tell you s it was firmware 1.5 and higher then rc29. Tried enter reboot enter on android screen. Tried flashing a few things. Says cant find E: /cache/system/command and no such file or directory. Just don't know where to begin. Just want newer/faster rom and overclock. Any help or redirecting would be appreciated. Just thought I could use 1on1 help as it isn't really a general problem. Thanks, gavin.
Doesn't it give you an option to skip the original Google login to get to your main screen?
I'd assume probably not for some odd reason since I'm guessing you'd have figured that out, but if not, use that skip option, then you can Wifi it to do the login etc after that..
Or try this thread...
http://forum.xda-developers.com/showthread.php?t=606057&highlight=four+corners+skip+login
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
COCODRILO45 said:
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
Click to expand...
Click to collapse
Interesting, this happened to me as well yesterday along with some incredible lag with keyboard and scrolling pages. Like the phone is doing something, ive Odin flashed stock fw 4 times with full wipes. seems something just suddenly defected my phone..
EDIT: BTW this happened after trying to flash a custom rom to my phone, phone was running great when i got it.
i got it working i had to flash back to stock via odin that's the only way it works for me as soon as i flash a custom rom it will stop working if you figure out how to get it working whit a custom rom let me now pls
COCODRILO45 said:
i got it working i had to flash back to stock via odin that's the only way it works for me as soon as i flash a custom rom it will stop working if you figure out how to get it working whit a custom rom let me now pls
Click to expand...
Click to collapse
Really? flashing back to stock worked for you? hmm wonder if my stock fw from sammy is damaged, but usually if it was it wouldn't flash via Odin it fail.
yea that worked for me im about to flash it back to stock again i just cant get it to work on any rom I keep getting that error i guess ill go stock rooted for now
COCODRILO45 said:
yea that worked for me im about to flash it back to stock again i just cant get it to work on any rom I keep getting that error i guess ill go stock rooted for now
Click to expand...
Click to collapse
Now when you got that fingerprint error, did you experience and hard core lag in scrolling or in the keyboard? like every 3 seconds it pause like it's doing something?
not really im using nova launcher and for keyboard swiftkey running preety smooth im on firekat rom
Having the same issue with Hyperdrive. Restore my stock rooted backup and it works fine. Really looking forward to an answer on this one.
Must setup first time before rooting and flashing roms. This has been discussed in other threads.
Did that, still didn't work.
Diablohtr said:
Having the same issue with Hyperdrive. Restore my stock rooted backup and it works fine. Really looking forward to an answer on this one.
Click to expand...
Click to collapse
Is it just Hyperdrive or have you tried one of the other ROMs? I am Dynamic Kat and do not have the issue although other people do, ones that did not setup before flashing that ROM.
keitht said:
Is it just Hyperdrive or have you tried one of the other ROMs? I am Dynamic Kat and do not have the issue although other people do, ones that did not setup before flashing that ROM.
Click to expand...
Click to collapse
Haven't tried any others yet. Going to wait it out a few days and hopefully we will have a solution.
COCODRILO45 said:
Hi I'm trying to set up my lock screen whit finger print but no matter homw many time i try i keep getting an error has occurred whit the fingerprint sensor if this messages appears repeatedly restart you phone i restarted the phone multiple times and same problem tried diffrent roms same problem any one else has this problem ?
Click to expand...
Click to collapse
I have your same problem but even worse, not going to solve it stock still gives the same result I am losing faith
CapitanFantasma said:
I have your same problem but even worse, not going to solve it stock still gives the same result I am losing faith
Click to expand...
Click to collapse
I tried using odin, I was on NIH firmware with no luck... and then flashed odin with NJ7 with no luck from that, I must of flashed the firmwares over 8 times,
I went and replaced my white note 4 at a corporate near me, with a black note 4.. no one had them in stock, dialing 611 was no help, they said since u bought it at a store, I had to go there, I found a corp store that had 2 left, I rushed over cause they don't hold it for anyone. employee wanted to charge a $50 restocking fee, I told them the phone is defective, and the manager override the sale..
I am having the same problem of the fingerprint scanner not working after flashing a custom ROM. I followed everything to a T & it didn't install (& yes, it is for my N4). I went back to stock using Odin, several times & have not resolved it yet. I do not want to take it back but I do like having the fingerprint scanner. Luckily, I have another N4 cause I bought 2 when they came out cause I planned on trying to turn a profit on 1 of them, but I'll be damned if everybody didn't make it easy as hell for anyone to get one. I guess I can use the 1 that doesn't work right for flashing & playing around on & then when I find "THE" ROM that I'm happiest with, I can flash it on the good 1. IDK. This is BS though. Somebody has to know how to get it back working right. I know that people that helped create this phablet, are members of this site, so I hope that they or someone else that has fixed this problem replies to our question. I flashed this ROM... http://forum.xda-developers.com/note-4-sprint/development/rom-alpha-semper-fi-t2926682 & the fingerprint scanner still worked, but after flashing this ROM... http://forum.xda-developers.com/note-4/snapdragon-dev/25-october-2014-n4-echoe-rom-1-t2917941 it no longer worked & hasn't since. I am going back to stock (again) & hoping this will work. I'll update if it works.
See this post/thread, it worked for me....
http://forum.xda-developers.com/showpost.php?p=56896357&postcount=85
http://forum.xda-developers.com/not...ure-fingerprint-scanner-t2919478/post56896357
Looks like these are for T-Mobile. What about Sprint? N910P
Sent from my SM-N910P
JoeBear1975 said:
I am having the same problem of the fingerprint scanner not working after flashing a custom ROM. I followed everything to a T & it didn't install (& yes, it is for my N4). I went back to stock using Odin, several times & have not resolved it yet. I do not want to take it back but I do like having the fingerprint scanner. Luckily, I have another N4 cause I bought 2 when they came out cause I planned on trying to turn a profit on 1 of them, but I'll be damned if everybody didn't make it easy as hell for anyone to get one. I guess I can use the 1 that doesn't work right for flashing & playing around on & then when I find "THE" ROM that I'm happiest with, I can flash it on the good 1. IDK. This is BS though. Somebody has to know how to get it back working right. I know that people that helped create this phablet, are members of this site, so I hope that they or someone else that has fixed this problem replies to our question. I flashed this ROM... http://forum.xda-developers.com/note-4-sprint/development/rom-alpha-semper-fi-t2926682 & the fingerprint scanner still worked, but after flashing this ROM... http://forum.xda-developers.com/note-4/snapdragon-dev/25-october-2014-n4-echoe-rom-1-t2917941 it no longer worked & hasn't since. I am going back to stock (again) & hoping this will work. I'll update if it works.
Click to expand...
Click to collapse
sorry dude, I don't know what it was, but when it happened to me, I was on NIH, and had the fingerprint saved, i tried everything, and when i deleted the saved fingerprint, it didn't want to work, nothing worked, i tried for 2 days searching and trying out my own stock odex roms and the firmware, it did not work.. sucks i know...
i had to return it to tmobile corporate store, if u have insurance on it, just play stupid and return it, if u have someone you know on tmobile, just let them put it on their account with put the $8 insurance, have them wait 1 week, call 611 and just say the fingerprint sensor went bad, and just pay $5 and have a replacement sent out,
lucky for me it happened less than a week for me, and went to a tmobile corporate store and they gave me a new phone in a box, but a replacement is still good it is not a refurbished phone...
I got it figured out & will post a file once it finally uploads, but in the mean time. If you have registered at SamMobile.com go there, click on the firmware tab, scroll halfway down to where it says FIRMWARE on the left side of the column & search device here on the right side. Type in your model number & it will show up right below the search area. Click & download the newest file. Here is the link for the Firmware site with search field filled in with N910 http://www.sammobile.com/firmwares/ While that is downloading, do a factory reset on your phone, DO NOT backup your info, you will need to restart it, but it's worth it. Once the reset is done, your phone will reboot, don't worry about going into setup, just turn the phone off & go into download mode (while phone is completely off, hold, in this order, VOLUME DOWN, HOME & POWER, press VOLUME UP when prompted. Connect your phone to computer. After the file downloads, open Odin (I'm assuming you already have Odin installed on your computer, if not you can find the link here http://odindownload.com/ I didn't have luck with Odin 3.09, but the 3.07 version works great. Your Firmware file should be done downloading by now, if it is, put it in your Note 4 folder (or whatever folder you have designated for your N910-) & extract it to there. Open Odin & click on the PDA button (& DO NOT CLICK ANYTHING ELSE), click on the file you just extracted & then click Start. Once that loads, your phone will reboot & be just like it was from the factory. Hope this helps everybody. Once the file uploads to my Dropbox, I'll post it on here to save you some time.
Here's the link for N910P https://www.dropbox.com/s/f5f63rb4d8ybsm3/N910PVPU1ANK2_N910PSPT1ANK2_XAS.zip?dl=0
If this was helpful, please hit thanks.
mdiaz33685 said:
sorry dude, I don't know what it was, but when it happened to me, I was on NIH, and had the fingerprint saved, i tried everything, and when i deleted the saved fingerprint, it didn't want to work, nothing worked, i tried for 2 days searching and trying out my own stock odex roms and the firmware, it did not work.. sucks i know...
i had to return it to tmobile corporate store, if u have insurance on it, just play stupid and return it, if u have someone you know on tmobile, just let them put it on their account with put the $8 insurance, have them wait 1 week, call 611 and just say the fingerprint sensor went bad, and just pay $5 and have a replacement sent out,
lucky for me it happened less than a week for me, and went to a tmobile corporate store and they gave me a new phone in a box, but a replacement is still good it is not a refurbished phone...
Click to expand...
Click to collapse
I stuck with it & fianlly got it figured out. What a pain in the a$$ that was, lol