[Q] Upgrading from 2.2.1 to Onecosmics RC3.1 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello,
I have Galaxy S 2.2.1 rooted (CF-root) with woring CWM, a Nandroid backup, and Onecosmics ICS goodys locked and loaded on my internal SD card. But still I can't find the b...courage to do a full wipe and flash ICS as if something goes wrong I will be without a descent smartphone for about 2-3 months.
My question is if I can flash straight from 2.2.1 or I should go through CM7 first.
One flash is simpler than 2 in my head..
I reckon that as the days go by I will do it and I want to make sure I do it the right way.
Thank you in advance.

Hi,
I, personally, went through a CM7 flash before going to OneCosmic's ICS, leaving Froyo. It took me about 10 minutes to do it, and in doing it this way, you stay close to OneCosmic's installation instructions.
1. Flash CM7
2. Reboot and test your phone (without installing apps & widgets)
3. Flash OneCosmic's ICS
Hope it might help!

Tilk94 said:
Hi,
I, personally, went through a CM7 flash before going to OneCosmic's ICS, leaving Froyo. It took me about 10 minutes to do it, and in doing it this way, you stay close to OneCosmic's installation instructions.
1. Flash CM7
2. Reboot and test your phone (without installing apps & widgets)
3. Flash OneCosmic's ICS
Hope it might help!
Click to expand...
Click to collapse
I would recommend flashing JVU (using Odin) before cm7 as it contains the latest bootloaders, just to make sure everything works as it should
Sent from my sgs

thanks!!!!

Yeah,
First I think you should install JVS with CF-Root and recovery.
Just register to samfirmware, where you can easily download the required files, also you'll find some tutorial. For CF-root, just google it, and you'll also find some tutorials, than just put the zip in your internal sd, and install it from recovery. Don't forget to remove your microSD before flashing, cause it can be damaged after.
If you did something wrong, you can still go back to stock JVS ( happened to me ) and start it over.
Regards

mformarcee said:
I would recommend flashing JVU (using Odin) before cm7 as it contains the latest bootloaders, just to make sure everything works as it should
Sent from my sgs
Click to expand...
Click to collapse
Works perfect! Thanks

aristomenis said:
Hello,
I have Galaxy S 2.2.1 rooted (CF-root) with woring CWM, a Nandroid backup, and Onecosmics ICS goodys locked and loaded on my internal SD card. But still I can't find the b...courage to do a full wipe and flash ICS as if something goes wrong I will be without a descent smartphone for about 2-3 months.
My question is if I can flash straight from 2.2.1 or I should go through CM7 first.
One flash is simpler than 2 in my head..
I reckon that as the days go by I will do it and I want to make sure I do it the right way.
Thank you in advance.
Click to expand...
Click to collapse
Dont worry, you can always Odin back to 2.x
Download mode through 3-button-combo > Odin (re-partition checked!)

Thank you for your insights, I will probably go to CM7 and then to ICS and if i get any issues I ll go back to 2.2.1 and then start from JVU.
I will let you know, soon I hope..

Going via CM7 should be the safest way. CM ROMS are the easiest and quickest ROMS to flash imo and you shouldn't have any problem. Once you do that without any problems, flashing ICS should be as easy.
Gluck!

So I tried to get CM7 over 2.2.1 with no success so I took the long road and upgraded to stock 2.3.4 via Odin, then flashed rooted CF root kernet, then upgraded to CM7 and finally (and after a lot of sweating) I got to Onecosmic's ICS which is great and really a major upgrade!
I think I have some donating to do........

aristomenis said:
So I tried to get CM7 over 2.2.1 with no success so I took the long road and upgraded to stock 2.3.4 via Odin, then flashed rooted CF root kernet, then upgraded to CM7 and finally (and after a lot of sweating) I got to Onecosmic's ICS which is great and really a major upgrade!
I think I have some donating to do........
Click to expand...
Click to collapse
wow.. ur phone went thru a marathon of flashing and booting !

You don't need courage its like an adventure learn and do it without fear
Flash gingerbread jvs or anything than cm7 or miui and than the onecosmic or teamhacksung
Sent from my GT-I9000 using xda premium

I have a 2.3.4 darky rom JVQ, with darkcore 2.9.2, can i flash directly to cm 7.1 and then to onecosmics rc3.1? Are there anychances to brick my phone in the process?
Sent from my GT-I9000 using Tapatalk

Related

[SOLVED]Darky's v10.0 RC3. How do I flash to CM7/MIUI?

Hi. I wanted to get a quick taste of Gingerbread a month or so ago, and tried the RC release of Darky's 10 version rom (I flashed RC3, and haven't installed anything newer after that).
Since then, lots of progress has been made on CM7/MIUI front. I want to try them. Thing is, all of the tutorials (both for CM7 and MIUI) say something like "make sure You have Froyo bootloaders" or something similar. And I have Android 2.3.3 right now. Do I need to downgrade to some kind of Froyo rom first? I am scared of doing this alone unguided - I almost bricked my phone once when flashing Darky's v10 through Odin.
Help appreciated!
PS The process looks generally the same for both MIUI and CM7, right? That's why I put them both in this thread.
PPS I don't care about my data - it can all get wiped.
Yeah you need to flash a froyo with FROYO BOOTLOADERS Make sure you do this. Go to samfirmware and get I think it was JPU or whichever has the bootloaders. After that flash speedmod froyo kernel. Then make a backup.
Once you do that, get ROM manager in the market and select CM7. If you don't want to buy Rom manager (you should though because it will make updating to the nightlies very easy) go to CWM and flash normally
Easy wasn't it
Easiset way to make sure that you have Froyo bootlaoders installed:
Flash EZBase - this can be found here: http://forum.xda-developers.com/showthread.php?t=991792&highlight=Ezbase
Then simply download the files required and forllow the relevant instructions for that particular rom.
I flashed my phone with CM7 successfully with the help of EZBase! Thanks!

[Q] DarkyRom 10.2 RE Issues/Question

Hey Guys,
I have a couple of questions in regards to going back to stock from DarkyROM 10.2.
After using 10.2 for about a month now, I have noticed that while the rom is fast, There are quite alot of glitches in my day to day operations. My 3D HD games no longer work smoothly (as they did in 2.3.3 with CWM), the phone will randomly freeze up when using the browser/gallery/calender etc. After multiple re-flashes I am coming to the conclusion that to get back to my original performance I may need to flash a stock JVQ and then mayby just us CF ROOT or something of the like to get CWM access.
My question is, what preparations need to be done before preforming this flash. Also, can the stock files be flashed with ODIN? Also, if anyone has any input on why DARKYROM 10.2 seems to have these issues, please feel free to let me know. Any help will be greatly appreciated, thanks in advance!!
Phone Specs:
Samsung Galaxy Vibrant (i9000m)
DarkyRom 10.2 RE -w- KC1 Modem
Only Mod preformed after flashing RE was updating the SMS application to the SGS2 App to restore the chat bubble colors. The issues were present before this update. Did the update through DarkyRom Tool.
If you guys need any more information, just let me know..
Anyone??????
Alright, I'll take this one if no one else will. I too have the i9000m, and have learned all I can about keeping it alive and well. Going back to stock is easy. Go to general and look for the stock firmware thread. You will get instructions there on how to flash with odin. I've never used darky before but I did use CM7 and flashed back no problem. You could also look for Ramad's prerooted roms. I'm running one right now, UGKG3. Works great as I couldn't root it myself.
Sent from my GT-I9000M using XDA App
Getinaf said:
Alright, I'll take this one if no one else will. I too have the i9000m, and have learned all I can about keeping it alive and well. Going back to stock is easy. Go to general and look for the stock firmware thread. You will get instructions there on how to flash with odin. I've never used darky before but I did use CM7 and flashed back no problem. You could also look for Ramad's prerooted roms. I'm running one right now, UGKG3. Works great as I couldn't root it myself.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Hey Dude, Thanks alot for your response! One more question before making the switch....Should the voodoo lag fix that comes with Darky 10.2 be disabled before flashing with Odin back to stock?
If you want to go back to stock ROM. Before flashing disable the lagfix (for safe). You can download the firmware from www.samfirmware.com. and its an odin base installation.
Post your problem in www.darkyrom.com some expert will help you...
Hey guys.
I have flashed stock ROM (2.3.4) via Odin and worked absolutely fine. Didn't need to fiddle with the lagfix or anything. Simply popped phone into DOWNLOAD mode and flashed (with re-partition/wipe and backing up "stuff" beforehand).
The lagfix menu I think, is in the RECOVERY mode in the extended power options menu. I think thats the CWM with the DarkyROM maybe? Either way, you can enable/disable the lagfix in that menu.
Hope this helps!
Akhtar

New to captivate, need help

OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
No need to flash the bootloaders, you have the gingerbread ones thanks to kies, they work worth EVERYTHING so you do not need to ever flash bootloaders again.aahs i digest you don't, Cause flashing those is the only tine you cab hard brick.
Flash corn kernel with Odin right now on gingerbread, then boot into recovery factory reset and format /system, and flash the ics ROM twice. Bingo bango you're done.
Thanks. I'm just switching from a Sony X10 so things are a little different here. Every guide said start at 2.1 so I didn't think i could flash from GB. I want to try ICS, but the X10 builds are still alphas.
Sent from my SAMSUNG-SGH-I897 using XDA
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
capocaccia said:
Most of the guides on here are getting dated. But for the Captivate, once you have gingerbread bootloaders you can flash pretty much anything from anything. Exceptions would be Cyanogenmod.
Click to expand...
Click to collapse
some people have reported that gingerbread bootloaders work with Cyanogenmod
He meant flash from CyanogenMod or any other MTD ROM to BML ROM
Again, thanks for the info. Maybe I'll write an updated guide after I get accustomed to this phone and ODIN. Flashtool for the X10 definitely spoiled me.
jfalgout2003 said:
OK, so I ran through all the guides and searched through what feels like a thousand posts. Here's my problem. I want to flash ICSSGS. Every guide I've read says I need to flash back to stock 2.1. I'm currently on the UCKK4 GB update. I used ODIN one click to flash back to 2.1, but couldn't get into download mode using any method (excluding JIG). So I used Kies to upgrade back to UCKK4. I can now get into download mode again. Can I just flash the bootloaders and a custom kernel from GB instead of being on Froyo?
Click to expand...
Click to collapse
I have successfully flashed about 10 roms while having gb boot loader they include 2-3 version of cm7, two version of miui rom , and many more gb boot loader can run any older or newer rom on captivate no need to downgrade bootloader
I'm a quick learner. I just switched over from a Sony X10 that was running a MIUI rom. My wife bought an iPhone so I took over her phone. I'm still learning the ins and outs of the captivate and how it works. I'm loving this phone. It's capable of so much more than the X10. I'm also loving this ICSSGS rom. It's smooth as butter.
Sent from my SGH-I897 running ICSSGS on Glitch using XDA
imnew
how to change model name for market
to access not supported apps?
inside file build.prob i have changed name but not working

So let me get this straight...

I recently upgraded my Note to official ICS (OTA) and I'm not liking it AT ALL! Now I really want to get far away from this update as possible and I'd like to switch to a CM9 nightly Rom. I've that now that I have upgraded to the official ICS Rom, I run the risk of super bricking my device. So now I ask you to help me make sure the following is correct so that I may move on from this wretched update:
DO NOT perform wipes if you are on original Samsung ICS
DO NOT perform wipes if you are on a original Samsung kernel??
Flash back to original Gingerbread Rom using odin BEFORE flashing to CM9
Flash to different kernel??
I've flashed millions of Roms but this one is scary and I just want to make sure haven't missed anything... Have I?
Thanks for you help!!
John J
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Akiainavas said:
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Click to expand...
Click to collapse
Thanks a lot man!! This is pretty much what I thought but I wanted to make ABSOLUTE sure! Cheers!
John J
So is the super-brick BUG on the official ICS OTA?? OMG
And yeah go back to gingerbrear via odin, get root then flash any CM9 tru CWM no problems...
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
darkmuck said:
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
Click to expand...
Click to collapse
There is no need to unroot first. You can flash stock GB rom directly via Odin.
I've now flashed to GB but before I move on to a CM9 nightly, do you recommend I flash the CM9 kernel as well? Seems like it is not a prerequisite but I would like to make sure. Thanks.
John J
afaik, when flashing a CM9 Nightly, the eligible kernel is built in, so no need to flash anything but the ROM.
i'm on one of imilkas first CM9 port and it says [email protected] #1 under Kernel version in settings.
Yes. The correct kernel is included in the nightly.

[Q] Upgrade confusion - Froyo to ICS

Hello guys,
I'm currently on:
Froyo 2.2
Kernel 2.6.32.9
[email protected] #91
FROYO.JPJPG
I want to upgrade to RemICS v1.3 (ICS 4.0.4), and my phone is already rooted, so my questions are:
A. Do I need to upgrade to Gingerbread 2.3.3 first?
B. Do I need to use ODIN in order to upgrade the Kernel to ICS as well as the ROM.
C. I've almost consumed most of my internal SD memory, so if I do a Nandroid Backup; where would it be stored? and would it include the apps as well as the data, or just the basic data without the apps?
I'm leaning more towards using ODIN than to put the ROM on my SD card, so that if something goes wrong I can flash it directly from there again.
I appreciate your help.
hitman33430 said:
Hello guys,
I'm currently on:
Froyo 2.2
Kernel 2.6.32.9
[email protected] #91
FROYO.JPJPG
I want to upgrade to RemICS v1.3 (ICS 4.0.4), and my phone is already rooted, so my questions are:
A. Do I need to upgrade to Gingerbread 2.3.3 first?
B. Do I need to use ODIN in order to upgrade the Kernel to ICS as well as the ROM.
C. I've almost consumed most of my internal SD memory, so if I do a Nandroid Backup; where would it be stored? and would it include the apps as well as the data, or just the basic data without the apps?
I'm leaning more towards using ODIN than to put the ROM on my SD card, so that if something goes wrong I can flash it directly from there again.
I appreciate your help.
Click to expand...
Click to collapse
First flash GB rom (best to do via odin). Kernels are usually included within rom so you don`t have to worry about that.Nandroid will be stored on sd but you can move it to your external sd or computer. If you`ll need it later for restoring you`ll simply put it back on int sd. Nandroid does complete picture of your phone, so everything will be backed up. BUT! You can not use nand restore done in GB directly from ICS. You`ll have to go back to GB rom before preforming it.
1. Yes. You need the gingerbread boot loaders.
2. Also yes. You will need Odin a second time to flash an ics kernel with cwm in order to flash the pics zip.
3. A nandroid does everything. Literally. Do one of them, go to another rom, when you come back its exactly as before. Down to the wallpaper and homescreen layout and wether Wi-Fi was on/off for example.
Sent from my GT-I9000 using xda app-developers app
You don't actually need gb bootloader to go to ics, but I recommend it as if anything goes wrong it means as easy reflash to gb , rather than going back to froyo, gb bootloader are needed to get onto cm7, which is where the confusion lies
I made the leap to GB 2.3.6 using Odin. Amazing difference from that stupid Froyo. I'm enjoying GB right now until I find a solid stable ICS.
Thank you guys for the info.:thumbup:
Sent from my GT-I9000 using xda app-developers app
hitman33430 said:
I made the leap to GB 2.3.6 using Odin. Amazing difference from that stupid Froyo. I'm enjoying GB right now until I find a solid stable ICS.
Thank you guys for the info.:thumbup:
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
If you want stable ICS I recommend ics333 extreme. Worked flawlessly on my good ol` s1. Since I bought s3 don`t know really how is with development on that rom but you can check it out on forum. Many different roms and ppl with different taste out there. Almost everyone has his favorite. This one worked really good for me.

Categories

Resources