Database Develop

[Q] ICS Alpha 6 on I9000 International

I have I9000 international and have flashed ICS Alpha 6 via CWM recovery and then the kernel but I can't get beyong the first logo screen. Please help me out. I have tried Alpha 4 also but the result was the same. Below is what I did.
1. Flashed latest XXJVT rom via ODIN.
2. Flashed Semaphore 1.8.2 kernel.
3. Flashed ICS Alpha6 rom via CWM recovery
4. And, flashed FuguICSi9000update.zip.
Please help me as I desperately want to try ICS on my I9000.
Thanks for the upcoming help!

Wipe dalvik cache, factory reset

I have tried this too. I am not a newbie. I usually flash my phone once in a week to try different custom roms but I don't know why I am not successful with this one.

Hello,
Can you go to the recovery and try flashing the zip file again.

I have just repeated everything from scratch after flashing brand new JVT rom but still of no use.

mfjfsdpk said:
I have I9000 international and have flashed ICS Alpha 6 via CWM recovery and then the kernel but I can't get beyong the first logo screen. Please help me out. I have tried Alpha 4 also but the result was the same. Below is what I did.
1. Flashed latest XXJVT rom via ODIN.
2. Flashed Semaphore 1.8.2 kernel.
3. Flashed ICS Alpha6 rom via CWM recovery
4. And, flashed FuguICSi9000update.zip.
Please help me as I desperately want to try ICS on my I9000.
Thanks for the upcoming help!
Click to expand...
Click to collapse
1. Flash XXJVT
2. Flash cf root or semaphone any kernel with cwm
3. Wipe data, cache and davik
4. Flash ICS Alpha 6
5. Enter recovery (If it boot loop take out battery)
6. Wipe data, cache and davik
7. Flash ICS Alpha 6
8. Flash FuguICSi9000update.zip
9. Reboot
Like miui, cwm3 seems to have problems flashing. When you flash in the first time on ICS Alpha 6, it will not work but cwm3 is updated to cwm5. Then you flash again should work already.

tanjiajun_34 said:
1. Flash XXJVT
2. Flash cf root or semaphone any kernel with cwm
3. Wipe data, cache and davik
4. Flash ICS Alpha 6
5. Enter recovery (If it boot loop take out battery)
6. Wipe data, cache and davik
7. Flash ICS Alpha 6
8. Flash FuguICSi9000update.zip
9. Reboot
Like miui, cwm3 seems to have problems flashing. When you flash in the first time on ICS Alpha 6, it will not work but cwm3 is updated to cwm5. Then you flash again should work already.
Click to expand...
Click to collapse
This was helpful. I am able to enter into ICS now. Was a bit tricky for me... Thanks a lot pal!

tanjiajun_34 said:
1. Flash XXJVT
2. Flash cf root or semaphone any kernel with cwm
3. Wipe data, cache and davik
4. Flash ICS Alpha 6
5. Enter recovery (If it boot loop take out battery)
6. Wipe data, cache and davik
7. Flash ICS Alpha 6
8. Flash FuguICSi9000update.zip
9. Reboot
Like miui, cwm3 seems to have problems flashing. When you flash in the first time on ICS Alpha 6, it will not work but cwm3 is updated to cwm5. Then you flash again should work already.
Click to expand...
Click to collapse
thank you very much!
I managed to install without problems

[Q] What do I need before I flash DarkKnight ICS?

I have to post here because I can't post in the direct thread.
http://forum.xda-developers.com/showthread.php?t=1510940
How do I actually install this? I've flashed ROMs before and I assume I can flash this one through CWM but it doesn't say what base OS you need to have running on the phone in order to flash it.

What rom are you currently running? If you are running one of the ics asop roms then I think you are good to go
Sent from my GT-I9000 using xda premium

Hi Guys
DarkKnights Author Recommend
Installation:
1. DOWNLOAD ZIP
2. WIPE DATA/FACTORY RESET.
3. WIPE CACHE PARTITION.
4. FLASH AND THEN REBOOT.
Click to expand...
Click to collapse
I Suggest if you come from Stock ROM
Flash a Kernel with CWM (CF-ROOT kernel with Addon, my Favorite) with Odin/Heimdall
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash latest CyanogenMod (be sure, you do it with full version)
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash the DarkKnight ICS
Have Fun !
I know it isn't the Best Way, but it surely will do if you like that !
Don't forget to thanks [if it useful was for you]
_______________

I was more asking which ROM to come from.
I ended up flashing 2.3.5 JVT and then this over the top of Semaphore kernel.

Flash ICS via ODIN directly

currently on alliancerom, just wonder if it possible to directly flash ICS back via ODIN or i MUST go back to GB first?

you can flash directly to ICS, you may get some FCs after the flash because of old custom ROM files, So the best thing to do would be to:
Reboot into TWRP recovery (included with Alliance ROM)
wipe cache / dalvik cache / factory reset
reboot download mode
flash ICS via ODIN or Mobile ODIN.

azzledazzle said:
you can flash directly to ICS, you may get some FCs after the flash because of old custom ROM files, So the best thing to do would be to:
Reboot into TWRP recovery (included with Alliance ROM)
wipe cache / dalvik cache / factory reset
reboot download mode
flash ICS via ODIN or Mobile ODIN.
Click to expand...
Click to collapse
i wonder is it safe to flash philz kernel and reboot recovery into cwm and flash other rom? because as far as i know flashing cwm type of zip will cause big issue in twrp

sure you can, just download it and install like you would a ROM, It might not work with Alliance ROM, so be sure to reboot recovery and change ROM from there. :good:

whitepandaaa said:
i wonder is it safe to flash philz kernel and reboot recovery into cwm and flash other rom? because as far as i know flashing cwm type of zip will cause big issue in twrp
Click to expand...
Click to collapse
You can flash Stock ICS and philz kernel at the same time with Mobile Odin. Then, reboot in recovery and do the wipes....that is how I did it and worked fine for me.

Help with flashing philz kernel and custom rom

Hi, I need some help - I want to flash my Note to Liquid Smooth 2.2 rom, so please tell me if I'm thinking properly.
1) My note have stock 4.1.2 rom XXLSA, so I need to flash letest Philz kernel from stock recovery, with is "PhilZ-cwm6-XXLSA-DBT-3.99-signed"
2) Do full backup, and flash latest CM10.1 kernel ("Kernel_CM10.1_Official_20130403_n7000_N8Mali"), reboot recovery into CM cwm
3) Full wipe - wipe data, cache, dalvik-cache
4) install rom zip and next gapps, reboot
Is everything as it should be? And what is N8Mali in cm10.1 name? There are a lot of kernel, so I don't know if this will be ok for me. Thanks for help, and sory for my stupid questions... but I really like to know if I'm doing everything in good way.

You don't need to flash the cm kernel after you flashed the philz kernel.
Sent from my GT-N7000 using Tapatalk 2

I have read somwhere that It is safer to flash from cm kernel, because flashing from philz sometimes goes wrong. But thanks for answer, thats easier without it

So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?

sinedoOo said:
So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?
Click to expand...
Click to collapse
Restoring backup in CWM (CM version) will be just fine. Thou, you can flash philz kernel first...but it is not necessary.

So first of all you are on XXLSA and want to flash Liquid smooth 2.2 so here are the steps :
1. download philz kernel for xxlsa .tar from here http://www.mediafire.com/file/wxqlp64nu6s7v66/PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5
2. download odin from here and extract it http://forum.xda-developers.com/showthread.php?t=2189539
3. open odin and click on PDA and insert the .tar Philz Kernel in
4. Go in to download mode with pressing Home+Volume Down+Power
5. Connect your phone with your Computer now odin should say "Added" and click START
6. after flashing the kernel disconnect your phone and let your phone boot it will take some mins
NOW YOU GOT ROOT AND CWM
7. the next step is that you put the liquid smooth 2.2 file and the gapps file in your phone storage
8. open CWM = volume up+home+power
9. Wipe everything
10. go to install zip from sd card after that from internal storage
11. now go to the liquid smooth file and flash it
12. after the liquid smooth file flash the gapps file
13. now reboot !
YOU ARE DONE !!!

i have one suggestion
Format /system, /data, preload (in mount and storage option) after doing wipes .
he need to flash cm kernel for flashing 4.2.2 aosp roms. in philz kernel cm 10.1 base rom installation will fail.
---------- Post added at 12:29 AM ---------- Previous post was at 12:17 AM ----------
Step by step Procedure
1. Flash Philz kernel from Stock recovery
2. Do full backup (backup all apps, sms, contacts etc)
3. Reboot recovery
4. Do a CWM backup
5. Do flash CM Kernel a cm kernel
6. Do wipe data, dalvik-cache
7. Do Format /system, /data, /preload
8. Do wipe cache partition
9. Do flash Liquid smooth rom & Flash Gapps for 4.2.2
Now reboot Phone, All Done. Enjoy new Rom :good::good:

[Q] [ADVICE] how to flash rom?

Hi ereryone! I'm fresh to the forum. This is my first post. I have a question about my N7000. I have this phone over two years and would like to change my ROM for something better and faster. I read a lot of information on different forums, I got to know about safe kernels for my model and ROMs, but still I'm a little bit confused. I'm rookie. I managed to flash stock kernel with safe PhilZ-cwm6-XXLT9-ORA-5.08.5 kernel and I don't know what to do next.
What should I do now?
I would like to have:
- C-ROM v6.3
- Forest CM11 kernel
I have found about two ways of solving this problem. Which one do U thing is correct?
FIRST
1. reboot into Recovery
2. Wipe data and dalvik cache
3. flash C-ROM v6.3
4. flash Forest CM11
5. flash Gapps
6. reboot
SECOND
1. reboot into Recovery
2. flash Raw r4 kernel
3. reboot recovery <--- not the system, just the recovery
4. Wipe data and dalvik cache
5. flash C-ROM v6.3
6. flash Forest CM11
7. flash Gapps
8. reboot
Thank in advance for all the help!

Second one is the way to go.